Search NASA⌕ Search

SEARCH · Search NASA

Results for “Distributed Propulsion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Directional locking effects for active matter particles coupled to a periodic substate

Directional locking occurs when a particle moving over a periodic substrate becomes constrained to travel along certain substrate symmetry directions. Such locking effects arise for colloids and superconducting vortices moving over ordered substrates when the direction of the external drive is varied. Here we study the directional locking of run-and-tumble active matter particles interacting with a periodic array of obstacles. In the absence of an external biasing force, we find that the active particle motion locks to various symmetry directions of the substrate when the run time between tumbles is large. The number of possible locking directions depends on the array density and on the relative sizes of the particles and the obstacles. For a square array of large obstacles, the active particle only locks to the x, y, and 45° directions, while for smaller obstacles, the number of locking angles increases. Each locking angle satisfies θ = arctan (p/q) , where p and q are integers, and the angle of motion can be measured using the ratio of the velocities or the velocity distributions in the x and y directions. When a biasing driving force is applied, the directional locking behavior is affected by the ratio of the self-propulsion force to the biasing force. For large biasing, the behavior resembles that found for directional locking in passive systems. For large obstacles under biased driving, a trapping behavior occurs that is nonmonotonic as a function of increasing run length or increasing self-propulsion force, and the trapping diminishes when the run length is sufficiently large.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Optimal Eco-Driving Control of Connected and Autonomous Vehicles Through Signalized Intersections

This article focuses on the speed planning problem for connected and automated vehicles (CAVs) communicating to traffic lights. The uncertainty of traffic signal timing for signalized intersections on the road is considered. The eco-driving problem is formulated as a data-driven chance-constrained robust optimization problem. Effective red-light duration (ERD) is defined as a random variable, and describes the feasible passing time through the signalized intersections. Usually, the true probability distribution for ERD is unknown. Consequently, a data-driven approach is adopted to formulate chance constraints based on empirical sample data. This incorporates robustness into the eco-driving control problem with respect to uncertain signal timing. Dynamic programming (DP) is employed to solve the optimization problem. The simulation results demonstrate that the proposed method can generate optimal speed reference trajectories with 40% less vehicle fuel consumption, while maintaining the arrival time at a similar level compared to a modified intelligent driver model (IDM). The proposed control approach significantly improves the controller's robustness in the face of uncertain signal timing, without requiring to know the distribution of the random variable a priori.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

Auto Recycler Report: Results from a Questionnaire about Processing Electric Vehicles and Handling High-Voltage Batteries

With the transition to clean energy the demand for electric vehicles in the United States is rapidly growing. As demand continues to rise in the next couple of decades, sourcing materials (e.g., lithium, nickel, cobalt, graphite, etc.) to put into new batteries for electric vehicles will be critical. The U.S. does not have significant reserves of most of these materials and relies heavily on foreign countries. The lithium-ion batteries in electric vehicles are large and contain substantial amounts of critical materials, therefore, they are a promising source of materials for new batteries. Recycling electric vehicle batteries when they reach their end-of-life will enable the United States to generate a domestic supply of materials needed for future batteries. [1-3] The auto recycling industry is the largest collective owner of end-of-life vehicles in the U.S. and will be the primary handlers of battery-powered vehicles (i.e., hybrid or electric) when they reach the end of their useful life. In an effort to better understand how the auto recycling industry currently handles battery-powered vehicles and their high-voltage batteries, DOE’s ReCell Center for Advanced Battery Recycling (ReCell) developed a questionnaire and distributed it to various trade organizations in the automotive recycling industry.

25 ENERGY STORAGE↗
DOE OSTI2020

A Deep Generative Model for Non-Intrusive Identification of EV Charging Profiles

The proliferation of electric vehicles (EVs) brings environmental benefits and technical challenges to power grids. An identification algorithm which can accurately extract individual EV charging profiles out of widely available smart meter measurements has attracted great interests. This paper proposes a non-intrusive identification framework for EV charging profile extraction, which is driven by deep generative models (DGM). First, the proposed DGM is designed as a representation layer embedded into the Markov process and used to model the joint probability distribution of available time-series data. A novel contribution is to approximate posterior distributions by neural networks whose parameters are obtained by variational inference and supervised learning. Second, the EV charging status is inferred from the DGM via dynamic programming. Lastly, the desired EV charging profile can be reconstructed by the rated power of EV models and inferred status. Compared with the benchmark Hidden Markov Models, the proposed framework can better handle noise in data with less computational complexity and better overall accuracy performances with smaller recall. The proposed framework is validated by numerical experiments on the Pecan Street dataset.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2021

Solid particulate mass and number from ducted fuel injection in an optically accessible diesel engine in skip-fired operation

Ducted fuel injection (DFI) is a new combustion strategy that has been shown to significantly attenuate soot formation in diesel engines. While previous studies have used optical diagnostics and optical filter smoke number methods to show that DFI reduces in-cylinder soot formation and engine-out soot emissions, respectively, this is the first study to measure solid particle number (PN) emissions in addition to particle mass (PM). Furthermore, this study quantitatively evaluates the use of transient particle instruments for measuring particles from skip-fired operation in an optical single cylinder research engine (SCRE). Engine-out PN was measured using an engine exhaust particle sizer following a catalytic stripper, and PM was measured using a photoacoustic analyzer. The study improves on earlier preliminary emissions studies by clearly showing that DFI reduces overall PM by 76%–79% and PN for particles larger than 23 nm by 77% relative to conventional diesel combustion at a 1200-rpm, 13.3-bar gross indicated mean effective pressure operating condition. The degree of engine-out PM reduction with DFI was similar across both particulate measurement instruments used in the work. Through the use of bimodal distribution fitting, DFI was also shown to reduce the geometric mean diameter of accumulation mode particles by 26%, similar to the effects of increased injection pressure in conventional diesel combustion systems. This work clearly shows the significant solid particulate matter reductions enabled by DFI while also demonstrating that engine-out PN can be accurately measured from an optical SCRE operating in a skip-fired mode. Based on these results, it is believed that DFI has the potential to enable fuel savings when implemented in multi-cylinder engines, both by lowering the required frequency of active diesel particulate filter regeneration, and by reducing the backpressure imposed by exhaust filtration systems.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2022

Results from "Charging Needs for Electric Semi-Trailer Trucks"

This data set includes modeling results from “Charging Needs for Electric Semi-Trailer Trucks” including charging demand distributions and charging speed requirements for the multiple scenarios and semi-trailer truck operating segments described in the study. Please cite as: Borlaug, B., Moniot, M., Birky, A., Alexander, M., and Muratori, M., Charging needs for electric semi-trailer trucks, Renew. Sust. Energ. Transit. (2022), 2, https://doi.org/10.1016/j.rset.2022.100038.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Simulations of Fuel-Air Mixing in a 7 Element Lean Direct Injection (LDI) Aviation Combustor: Preprint

The increased accessibility of commercial aviation to the general population has in-creased the conventional jet fuel consumption, thereby causing increased CO2emissions. One of the strategies to reduce the environmental impact is to use sustainable aviation fuels (SAFs). SAFs are jet fuels obtained from renewable resources such as biomass and waste streams such as plastics/municipal solid wastes. Even though the use of SAFs has been gaining importance over the last two decades, only a few numerical studies on their usage have been reported so far. In this study, two SAFs namely, alcohol to jet (ATJ) and hydrotreated esters and fatty acids (HEFA), are chosen and their use in a simple, lead direct injection (LDI) combustor is studied. The focus of this study is limited to the thermo-chemical properties of the fuels and their impact on fuel distribution and evaporation. Hence, only non-reactive simulations are performed. A high accuracy, adaptive mesh refinement based low-Mach solver, PeleLMeX, is used for performing the simulations. The time-averaged flow results indicate faster evaporation of HEFA when compared to ATJ and Jet-A. The difference in fuel evaporation rates is attributed to the differences in fuel viscosity and surface tension properties and the concomitant variations in the fuel droplet size distributions.

adaptive mesh refinement↗
DOE OSTI2023

LA100 Equity Strategies

LA100 Equity Strategies is a collaborative effort between LADWP, NREL, UCLA, and Kearns & West that employs an interdisciplinary approach utilizing distinct - but connected - research efforts informed and guided by the project Steering Committee, which met monthly through the duration of the project. Chapters 1 through 4 address recognition and procedural justice through recognition, process, and community strategies, while Chapters 5 through 12 address distributional justice through program and infrastructure strategies. Chapters 13 through 17 provide policy and program strategies. Each chapter provides data, methods, tools, insights, and strategies to help LADWP make data-driven, community-informed decisions for equitable investments and program development.

ADVANCED PROPULSION SYSTEMS,ENERGY CONSERVATION, C↗
DOE OSTI2026

Adaptive Reinforcement Learning Control for Power Distribution in Multi-Output Resonant Converters

This paper presents an adaptive reinforcement learning (ARL)-based control framework for efficient power distribution in a multi-output resonant converter for UAV applications. The proposed system is based on a high-frequency isolated resonant architecture, where a single energy source supplies multiple propulsion loads through independently controlled output rectifiers, addressing the need for coordinated multi-motor power management. The ARL framework dynamically allocates output power by learning optimal phase-shift control actions under varying load demands and operating conditions. The agent autonomously determines control parameters that maximize conversion efficiency while ensuring accurate power sharing among multiple outputs. In addition, the proposed approach enables adaptive operation without requiring detailed system modeling or manual tuning. Experimental results demonstrate stable and efficient performance over a wide range of operating conditions, confirming the effectiveness and robustness of the learning-based control strategy for multi-output resonant converter system.

Asa, Erdem [ORNL] (ORCID:0000000190884812)↗
DOE OSTI2022

Impact of Open Communication Networks on Load Frequency Control with Plug-in Electric Vehicles by Cyber-Physical Dynamic Co-Simulation: Preprint

With the increasing electrification of the transportation sector, vehicle to grid (V2G) control technologies are promising to improving system frequency stability. However, these control technologies might require non-traditional communication supports. This paper investigates the impacts of electric vehicles (EVs) V2G on power system frequency regulation considering communication variations through transmission-distribution-communication (TDC) dynamic simulation. The simulation model is built based on our previously developed open-source transmission-and-distribution (T&D) dynamic co-simulation framework. Here, we add the communication variation functions (i.e. delay and packet loss) to complete the TDC simulation framework. In the case studies, practical communication variation scenarios are considered when the system experiencing an N-1 generation trip contingency. The considered scenarios include communication delay and packet loss using both homogeneous and heterogeneous assumptions. The delay and packet loss rate are the same in all communication channels in the homogeneous case but varies in the heterogeneous case. The results show the communication delay has an obvious impact on the frequency recovery compared to the communication packet drop. The impacts of the standard deviations of communication delay time and packet drop rate are not significant. The outcomes of this work can help improve the EV frequency regulation services and provide robust and effect supports to the grid.

ADVANCED PROPULSION SYSTEMS,ENERGY PLANNING, POLIC↗
DOE OSTI2023

Modeling U.S. Light-Duty Demand for EV Charging Infrastructure in 2030

With the support of DOE's Vehicle Technologies Office and the DOE/DOT Joint Office (JO), NREL has applied the EVI-X modeling suite to conduct a National Electric Vehicle Infrastructure Needs Assessment. This report considers a 2030 scenario in which 50% of light-duty sales are electric (including plug-in hybrids), resulting in an on-road stock of 33 million vehicles. We consider the needs of vehicles used for typical daily driving, drivers without access to residential charging, corridor charging supporting long-distance travel, and ride-hailing electrification. We find that a cumulative capital investment of $82 billion in public and private charging infrastructure will be necessary in our baseline scenario (approximately 3x greater than our estimate of planned investments to date). This result is framed as a conservative estimate as the assumed costs include charging equipment and installation but exclude the cost of grid upgrades and distributed energy resources.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2023

LA100 Equity Strategies: Executive Summary

LA100 Equity Strategies is a collaborative effort between LADWP, NREL, UCLA, and Kearns & West that employs an interdisciplinary approach utilizing distinct - but connected - research efforts informed and guided by the project Steering Committee, which met monthly through the duration of the project. Chapters 1 through 4 address recognition and procedural justice through recognition, process, and community strategies, while Chapters 5 through 12 address distributional justice through program and infrastructure strategies. Chapters 13 through 17 provide policy and program strategies. Each chapter provides data, methods, tools, insights, and strategies to help LADWP make data-driven, community- informed decisions for equitable investments and program development.

14 SOLAR ENERGY↗
DOE OSTI2025

A method for modeling battery-temperature-aware EV power profiles utilizing Next-Gen Profile data

With the expected increase in the number of electric vehicles (EVs) on the road in the coming years, it is important that analysis tools are capable of modeling and predicting the expected load on the power grid due to both individual EV charging sessions as well as large populations of vehicles. To do this accurately, the power profile of an EV charge session must be accurately modeled, including for scenarios where the temperature is above or below the ideal, and also take into account the nuances of manufacturer charging preferences. This paper introduces a method that utilizes the data in the Next-Gen Profile (NGP) data collection project to build a model of EV charging that takes into account the variations in charging power that occur due to off-nominal battery temperature and manufacturer preferences that limit power due to cold temperatures or high battery state-of-charge.

24 - POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Modeling of the spray-induced wall stress acting on the ignition assistance device

This research introduces a novel wall-stress model called the Spray-Induced Wall Stress (SIWS) model, which considers the effects of spray-wall impingement and the resulting formation of wall stress within the Lagrangian spray modeling framework. The primary objective of this paper is to provide a mathematical description of the fundamental physics underlying the model. Subsequently, the proposed model is validated using existing experimental data. Here, the remainder of the study focuses on the practical application of the model to an ignition assistance device. Specifically, this device is installed in a compression ignition engine and designed to enhance ignition in aviation-fueled high-altitude aircraft propulsion systems. The research sheds light on the mechanical impulse caused by the high-speed impact of the spray jet, leading to the accumulation of mechanical stress on the rigid body of the ignition assistance device. Previous studies on fluid-structure interaction have only considered the interaction between the gas phase and the solid wall. However, the SIWS model incorporates the additional impact of the impinging liquid spray jet. Consequently, the simulated stress distribution on the ignition assistance device can be estimated by considering both the gas-phase-induced term and the spray-induced term simultaneously.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2023

An experimental and computational analysis of combustion heat release transformation in dual fuel combustion

Dual fuel (DF) diesel-methane combustion, which employs a high-reactivity fuel (diesel) to ignite a low-reactivity fuel (methane), is a widely studied combustion strategy for internal combustion engines, with significant potential for engine-out emissions reductions without the need for major hardware modifications. A phenomenon, which has been reported in the DF literature, but not explained fully, is the transformation of the shape of the apparent heat release rate (AHRR) curve as the start of injection (SOI) of diesel is advanced beyond a certain threshold; coincidentally, this AHRR transformation is usually accompanied by a sharp decrease in engine-out emissions of oxides of nitrogen (NOx). The goal of the present work is to establish the underlying physical reason(s) that cause the AHRR transformation. The AHRR transformation was observed on a single cylinder research engine (SCRE) at an indicated mean effective pressure (IMEP) of 5 bar at a speed of 1500 rev/min. The transformation occurred over a range of SOIs from 330 to 320 crank angle degrees (CAD). While the 330 CAD SOI exhibited a typical two-stage AHRR curve, with a clearly definable first-stage peak followed by a second-stage AHRR with little-to-no low temperature heat release (LTHR) present and high engine-out NOx, the 320 CAD SOI exhibited a single-stage, Gaussian-like AHRR curve, with noticeable LTHR and at least one order-of-magnitude lower NOx emissions. Here, leveraging analysis of experimental data and three-dimensional computational fluid dynamic simulations, the authors show that the AHRR transformation is impacted mainly by differences in local equivalence ratio distributions within the cylinder at ignition onset for different diesel SOIs.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2022

Thermal performance sensitivity to radial power flattening considerations in Nuclear Thermal Propulsion Reactors

Nuclear thermal propulsion is currently being developed for manned Mars and Lunar missions by the National Aeronautics and Space Administration due to its increased specific impulse and significant thrust to reduce the total trip time and cost of deep space missions. To maximize the performance of the engine the exit hydrogen propellant temperature should, ideally, be uniformly distributed among all the fuel elements. Uniform exit temperatures imply that the power must be flattened as much as possible. This paper leverages decoupled neutronic and thermal-hydraulic models to assess the thermal performance and reactivity tradeoffs associated with flattening the radial power distribution by adjusting the fuel kernel loading for each fuel element within the core. The results suggest that a uniform radial power distribution for a single control drum position will not necessarily yield an optimal core design due to the higher variance in power and thus maximum fuel and exit propellant temperature as the control drums rotate out during operation. The results presented here only point to the design characteristics be considered when core-level multi-physics simulations are applied in the context of a specific mission. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗