Search NASA⌕ Search

SEARCH · Search NASA

Results for “Disulfides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Photoluminescence Induced by Substitutional Nitrogen in Single-Layer Tungsten Disulfide

The electronic and optical properties of two-dimensional materials can be strongly influenced by defects, some of which can find significant implementations, such as controllable doping, prolonged valley lifetime, and single-photon emissions. Here, we demonstrate that defects created by remote N 2 plasma exposure in single-layer WS 2 can induce a distinct low-energy photoluminescence (PL) peak at 1.59 eV, which is in sharp contrast to that caused by remote Ar plasma. This PL peak has a critical requirement on the N 2 plasma exposure dose, which is strongest for WS 2 with about 2.0% sulfur deficiencies (including substitutions and vacancies) and vanishes at 5.6% or higher sulfur deficiencies. Both experiments and first-principles calculations suggest that this 1.59 eV PL peak is caused by defects related to the sulfur substitutions by nitrogen, even though low-temperature PL measurements also reveal that not all the sulfur vacancies are remedied by the substitutional nitrogen. The distinct low-energy PL peak suggests that the substitutional nitrogen defect in single-layer WS 2 can potentially serve as an isolated artificial atom for creating single-photon emitters, and its intensity can also be used to monitor the doping concentrations of substitutional nitrogen.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Interfacial Charge Transfer in Lead Sulfide/Cadmium Sulfide Quantum Dot–Monolayer Molybdenum Disulfide Heterostructures

We investigate the ultrafast interfacial charge transfer dynamics in mixed-dimensional PbS/CdS quantum dot (QD)–monolayer MoS 2 heterostructures exhibiting a type-II band alignment. These 0D–2D heterostructures were assembled using oleic acid-capped PbS/CdS QDs with systematically varied core sizes deposited onto molecular beam epitaxy-grown monolayer MoS 2 . Steady-state and time-resolved optical spectroscopies revealed pronounced bidirectional charge transfer between the 0D and 2D components, involving both electron and hole exchange across the interface. The quenching of the monolayer MoS 2 A-exciton bleach and the modifications of its decay dynamics provide direct evidence for efficient hole transfer from photoexcited MoS 2 into the PbS QD core. Concurrently, attenuation of the QD ground-state bleach and the emergence of ultrafast decay components confirmed electron transfer from photoexcited QDs to monolayer MoS 2 . Both hole and electron transfer processes are dependent on the QD core size, with smaller cores enabling faster transfer rates and higher efficiencies due to enhanced band offsets and interfacial coupling. The complementary insights gained from transient absorption and time-resolved photoluminescence measurements clarify the mechanisms governing interfacial carrier exchange and highlight the importance of both hole and electron transfer as key components in the functioning of such 0D–2D heterostructures. This study underscores the potential of 0D–2D semiconductor heterostructures for advanced optoelectronic and light-energy conversion applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Mechanistic Investigation of Molybdenum Disulfide Defect Photoluminescence Quenching by Adsorbed Metallophthalocyanines

Lattice defects play an important role in determining the optical and electrical properties of monolayer semiconductors such as MoS 2 . Although the structures of various defects in monolayer MoS 2 are well studied, little is known about the nature of the fluorescent defect species and their interaction with molecular adsorbates. In this study, the quenching of the low-temperature defect photoluminescence (PL) in MoS 2 is investigated following the deposition of metallophthalocyanines (MPcs). The quenching is found to significantly depend on the identity of the phthalocyanine metal, with the quenching efficiency decreasing in the order CoPc > CuPc > ZnPc, and almost no quenching by metal-free H 2 Pc is observed. Futher, time-correlated single photon counting (TCSPC) measurements corroborate the observed trend, indicating a decrease in the defect PL lifetime upon MPc adsorption, and the gate voltage-dependent PL reveals the suppression of the defect emission even at large Fermi level shifts. Density functional theory modeling argues that the MPc complexes stabilize dark negatively charged defects over luminescent neutral defects through an electrostatic local gating effect. These results demonstrate the control of defectbased excited-state decay pathways via molecular electronic structure tuning, which has broad implications for the design of mixeddimensional optoelectronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Hard Ferromagnetism Down to the Thinnest Limit of Iron-Intercalated Tantalum Disulfide

Two-dimensional (2D) magnetic crystals hold promise for miniaturized and ultralow power electronic devices that exploit spin manipulation. In these materials, large, controllable magnetocrystalline anisotropy (MCA) is a prerequisite for the stabilization and manipulation of long-range magnetic order. In known 2D magnetic crystals, relatively weak MCA typically results in soft ferromagnetism. Furthermore, we demonstrate that ferromagnetic order persists down to the thinnest limit of Fe x TaS 2 (Fe-intercalated bilayer 2H-TaS 2 ) with giant coercivities up to 3 T. We prepare Fe-intercalated TaS 2 by chemical intercalation of van der Waals-layered 2H-TaS 2 crystals and perform variable-temperature transport, transmission electron microscopy, and confocal Raman spectroscopy measurements to shed new light on the coupled effects of dimensionality, degree of intercalation, and intercalant order/disorder on the hard ferromagnetic behavior of Fe x TaS 2 . More generally, we show that chemical intercalation gives access to a rich synthetic parameter space for low-dimensional magnets, in which magnetic properties can be tailored by the choice of the host material and intercalant identity/amount, in addition to the manifold distinctive degrees of freedom available in atomically thin, van der Waals crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Deviatoric stress-induced metallization, layer reconstruction and collapse of van der Waals bonded zirconium disulfide

In contrast to two-dimensional (2D) monolayer materials, van der Waals layered transition metal dichalcogenides exhibit rich polymorphism, making them promising candidates for novel superconductor, topological insulators and electrochemical catalysts. Here, we highlight the role of hydrostatic pressure on the evolution of electronic and crystal structures of layered ZrS2. Under deviatoric stress, our electrical experiments demonstrate a semiconductor-to-metal transition above 30.2 GPa, while quasi-hydrostatic compression postponed the metallization to 38.9 GPa. Both X-ray diffraction and Raman results reveal structural phase transitions different from those under hydrostatic pressure. Under deviatoric stress, ZrS2 rearranges the original ZrS6 octahedra into ZrS8 cuboids at 5.5 GPa, in which the unique cuboids coordination of Zr atoms is thermodynamically metastable. The structure collapses to a partially disordered phase at 17.4 GPa. These complex phase transitions present the importance of deviatoric stress on the highly tunable electronic properties of ZrS2 with possible implications for optoelectronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Formation of uranium disulfide from a uranium thioamidate single-source precursor

A single-source-precursor approach was developed to synthesize uranium-based materials outside of the typically-studied oxides. This approach allows for shorter reaction times, milder reaction conditions, and control over the chemicals present in synthesis. To this end, the first homoleptic uranium thioamidate complex was synthesized as a precursor for US 2 materials. Pyrolysis of the thioamidate results in decomposition via an alkene elimination pathway and formation of γ-US 2 , which has historically been hard to access without the need for a secondary sulfur source. Despite the oxophilicity of uranium, the method successfully forms US 2 without the inclusion of oxygen in the bulk final product. These findings are supported by simultaneous thermal analysis, elemental analysis, powder X-ray diffraction, and uranium L 3 -edge X-ray absorption fine-structure spectroscopy. This work represents the first example of a single-source precursor approach to target and synthesize actinide materials other than the oxides.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Area-selective deposition of germanium on patterned graphene/monolayer molybdenum disulfide stacks via dipole engineering

Heterogeneous integration of two-dimensional materials and the conventional semiconductor has opened opportunities for next-generation semiconductor devices and their processing. Heterogeneous integration has been studied for economical manufacturing by substrate recycling and novel functionalities by a combination of incommensurate materials. However, utilizing the integration requires controlling locations of the integrated architectures. Here, we show area-selective deposition (ASD) of germanium on the graphene/MoS 2 stack. Ge nucleation precisely occurred on the surfaces of the patterned graphene/MoS 2 stack via dipole engineering. In this study, the growth temperature of ASD of Ge was significantly lower than that based on precursor desorption on SiO 2 . The first-principles calculations revealed that Ge deposited by ASD on the graphene/MoS 2 stack was not affected by charge transfer. This work provides a viable way to utilize atomically thin materials for next-generation semiconductor devices, which can be applicable for “Beyond Moore” and “More Moore” approaches.

2D materials↗