Search NASA⌕ Search

SEARCH · Search NASA

Results for “Doped Fuel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

A study of the effects of solid phase reactions on the thermal degradation and ballistic properties of solid propellants

The thermal stability of perchlorate composite propellants was studied at 135 and 170 C. The experimental efforts were concentrated on determining the importance of heterogeneous oxidizer-fuel reactions in the thermal degradation process. The experimental approach used to elucidate the mechanisms by which the oxidizer fuel composites thermally degrade was divided into two parts: (1) keeping the fuel constant and varying the nature of the oxidizers, and (2) holding the oxidizer constant and varying the fuel components. The fuel component primarily utilized in the first phase was polyethylene. Oxidizers included KClO4, KClO3, NH4ClO4 and NH4ClO4 doped with materials such as chlorate, phosphate and arsenate. In the second phase the oxidizer used was primarily NH4ClO4 while the fuels included saturated and unsaturated polybutadiene prepolymers and a series of bonding agents. Techniques employed in the current study include thermogravimetric measurements, differential thermal analysis, infrared, mass spectrometry, electron microscopy, and appropriate wet chemical analysis.

Schmidt, W. G.↗
DOE OSTI2020

Formation of multicomponent alloy particles in doped ceria under I 2+ ion irradiation and thermal annealing

Multicomponent alloys resembling the e-phase particles in nuclear fuel have the potential to immobilize 99 Tc in a stable waste form. Formation of such multicomponent alloys under extreme conditions is studied in a non-activated model system: CeO 2 doped with 2 wt% Mo, 1.5 wt% Ru, 0.75 wt% Pd, 0.5 wt% Re and 0.25 wt% Rh. The doped CeO 2 films were irradiated with I 2+ ions (610°C, 10 16 and 5×10 16 I 2+ /cm 2 ). For selected samples post-irradiation heat treatment was conducted (900°C, 1100°C). Analytical TEM revealed the formation of 5-20 nm precipitates containing Pd, Mo, and Re sometimes associated with cavities. Iodine was found to segregate to grain boundaries and cracks. After heat treatment at 1100°C, the CeO 2 matrix had recrystallized. Precipitates containing Pd, Mo, Re, and Ru were observed near the interface with the polycrystalline YSZ substrate. It follows that Pd is the most mobile element, followed by Mo and Re. Finally, while irradiation promotes precipitation, high-temperature effects are more significant.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Mechanistic Insights and Rational Design of Ca-Doped CeO 2 Catalyst for Acetic Acid Ketonization

Carboxylic acid ketonization has recently gained significant attention to produce biomass-derived hydrocarbon fuels as it not only removes the highly reactive carboxylic functional group but also increases the size of the carbon chain. In this work, Ca-doped CeO 2 -based catalysts were investigated for acetic acid ketonization using a combined experimental and computational approach. Acetic acid conversion was performed across a range of temperatures including higher temperatures relevant to catalytic hot gas filtration (450 °C). Ca addition slightly decreases overall acetic acid ketonization reactivity yet stabilizes the catalyst at the higher temperatures necessary for catalytic hot gas filtration. From density functional theory calculations of the ketonization reaction mechanism, the C–C coupling and water formation steps are identified as two of the most energy-consuming steps on a CeO 2 surface with a proximal oxygen vacancy and the presence of a Ca dopant stabilizes the key intermediates. Calculations predict an optimal structure comprising three Ca ensembles to minimize the reaction free energies for C–C coupling and water formation steps. These findings provide a priori information to guide future experiments for ketonization catalyst design and development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Resolving Diverse Oxygen Transport Pathways Across Sr‐Doped Lanthanum Ferrite and Metal‐Perovskite Heterostructures

Abstract Perovskite structured transition metal oxides are important technological materials for catalysis and solid oxide fuel cell applications. Their functionality often depends on oxygen diffusivity and mobility through complex oxide heterostructures, which can be significantly impacted by structural and chemical modifications, such as doping. Further, when utilized within electrochemical cells, interfacial reactions with other components (e.g., Ni‐ and Cr‐based alloy electrodes and interconnects) can influence the perovskite's reactivity and ion transport, leading to complex dependencies that are difficult to control in real‐world environments. Here, this work uses isotopic tracers and atom probe tomography to directly visualize oxygen diffusion and transport pathways across perovskite and metal‐perovskite heterostructures, that is, (Ni‐Cr coated) Sr‐doped lanthanum ferrite (La 0.5 Sr 0.5 FeO 3 ; LSFO). Annealing in 18 O 2(g) results in elemental and isotopic redistributions through oxygen exchange (OE) in the LSFO while Ni‐Cr undergoes oxidation via multiple mechanisms and transport pathways. Complementary density functional theory calculations at experimental conditions provide rationale for OE reaction mechanisms and reveal a complex interplay of different thermodynamic and kinetic drivers. These results shed light on the fundamental coupling of defects and oxygen transport in an important class of catalytic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Long term durability test and post mortem for metal-supported solid oxide electrolysis cells

Hydrogen is a renewable energy carrier, and electrolysis to split water is the most environmentally friendly method to produce hydrogen. This work reports long-term durability and degradation mode analysis for metal-supported solid oxide electrolysis cells (MS-SOECs). Catalyst screening showed that MS-SOECs with composite electrode catalysts (samarium-doped ceria-nickel [SDC-Ni] serving as a fuel electrode catalyst, and praseodymium oxide [PrO x ]-SDC or La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3 [LSCF]-SDC serving as an air electrode catalyst) exhibit the highest electrochemical performance at 700 °C. The degradation rate of cells with LSCF-SDC as the air electrode catalyst was as low as 1.3%/100 h in long term durability tests at a current density of 0.33 A cm -2 , in contrast to rapid degradation observed for a cell with a PrO x -SDC air electrode. Furthermore, post-mortem analysis reveals the degradation is dependent on the primary modes of fuel electrode catalyst coarsening and Cr poisoning on the air electrode catalyst, as well as secondary modes of oxidation of the metal support and local elemental accumulation of Ni. Other degradation modes reported in conventional anode-supported SOECs, such as Ni migration, foreign element contamination, delamination of the cell, and nano-voids on the electrolyte, are not observed in the present MS-SOECs.

25 ENERGY STORAGE↗
DOE OSTI2026

Andrew Dieringer Poster for review

Silicon carbide has been identified as a useful material for nuclear application due to its heat resistance, low neutron absorbing cross-section, chemical inertness, and its rigidity as a structural material. These properties make it very favorable for high temperature environments such as in TRISO fuel and advanced reactor designs. Treatments such as n-doping, where carrier atoms are added to increase the number of free electrons, are expected to further improve properties such as thermal conductivity and electrical resistivity. Due to the high amount of neutron interactions in a nuclear reactor, it is expected that silicon carbide used in a reactor will be passively n-doped via transmutation. Studying the effects of n-doping in silicon carbide can help us better understand how the material will operate under real world conditions. We have found that n-doping the SiC increases both thermal and electrical conductivity, providing positive feedback under reactor usage. Previously it had been thought that under reactor conditions material properties of SiC could only degrade due to defects caused by neutron interactions. This study shows that transmutation doping can help to counteract and slow this process. This research shows that SiC can be used in nuclear reactor components contrasting with more costly and complicated alternative materials.

36 - MATERIALS SCIENCE↗
DOE OSTI2022

Development of a creep model informed by lower-length scale simulations to simulate creep in doped UO 2

Using molecular dynamics, we predict information at the atomistic scale used to develop a mechanistic UO 2 creep model for use in higher length-scale fuel performance codes. The ultimate objective of the model is to better describe the grain size dependence and therefore impact of doping on creep rates in UO 2 . In a previous NEAMS milestone, we found that Nabarro-Herring (bulk diffusional) creep was too low to capture the experimentally observed creep rates in standard UO 2 . Moreover, in that milestone, other mechanisms were explored, such as Coble (grain boundary) creep and dislocation climb, with each mechanism exhibiting different grain size dependencies. Again, these were orders of magnitude too low to describe the experimental creep rates. In this work, we address the previous assumptions made for the Coble creep mechanism by investigating the diffusivity of various defects at grain boundaries in UO 2 and, critically, to determine if enhanced grain boundary diffusivity allows the model to better reproduce experimental results. The diffusivity as a function of temperature for different concentrations of uranium vacancies and interstitials for bulk UO 2 have also been examined using cluster dynamics. Furthermore, using a concentration dependent segregation model, the concentration of defects at the grain boundary were predicted. This atomistic data was then input into the various creep mechanisms and the creep rates compared to the empirical MATPRO correlation (used in BISON) and experiment.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Sooting tendencies of 20 bio-derived fuels for advanced spark-ignition engines

The sooting tendencies of 20 bio-derived fuels indicated as potential blendstocks for spark-ignition engines by the Co-Optimization of Fuels & Engines (Co-Optima) Initiative are studied. The Yield Sooting Index (YSI) is used to quantify the sooting tendencies. The Co-Optima Chemical Model is used to predict the numerical YSIs for all test fuels, and these results are compared with measurements. Experimental YSIs are newly measured for 2 furans and are taken from our previous work for the other compounds. Overall, the predicted YSIs agree well with measurements, within the experimental uncertainties, except for 2,5-dimethylfuran (2,5-DMF). It is found that Polycyclic Aromatic Hydrocarbons (PAH) growth reactions have little influence on the relative soot production from each fuel and therefore on YSI predictions. A modified sensitivity coefficient formulation is proposed to evaluate reaction sensitivities specifically for YSI. This formulation is applied to the 2,5-DMF-doped flame, and six 2,5-DMF initial decomposition reactions, which lead to different major soot precursors, are identified as the most sensitive reactions. The impact of the chemical kinetic uncertainties embedded in these reactions is quantified by randomly perturbing their reaction rates within a factor of two. The resulting prediction uncertainty in the 2,5-DMF-doped flame is found to be ± 8 YSI units (±11%), which demonstrates that the test-fuel-specific decomposition reactions indeed have considerable influence on its YSI prediction. Our research suggests that more accurate kinetic parameters for fuel initial decomposition reactions can potentially improve YSI predictions effectively, without altering the YSI predictions of other fuels with significantly different molecular structures.

09 BIOMASS FUELS↗
DOE OSTI2025

Infiltrated electrodes for metal supported solid oxide electrolysis cells

Metal-supported solid oxide cells (MSOCs) are an alternative to conventional solid oxide cells (SOCs) based on ceramic cermets, offering lower material costs and higher operational flexibility. In this study symmetric MSOCs with infiltrated electrodes are explored for steam electrolysis operation to understand the underlying operation and degradation principles and suggest a direction for future MSOCs development. Two different fuel electrode backbones are used: an electronically-conductive lanthanum strontium co-doped iron nickel titanate (LSFNT) infiltrated with cerium-gadolinium oxide (CGO), or an ionic conductive zirconia based backbone (10ScYSZ) infiltrated with Ni:CGO. At the oxygen side, the backbone is 10ScYSZ, which is infiltrated with lanthanum-strontium co-doped cobalt oxide (LSC), or praseodymium oxide as cobalt-free alternative for comparison. This study suggests that the backbone electronic conductivity is key for good electrochemical performance as well as for boosting cell durability. Highly electronically conductive nanoparticles, especially nickel, were observed to irreversibly agglomerate driven by thermal conditions, whereas CGO proved to be a very stable electrocatalyst. At the fuel side, CGO (LSFNT) electrode showed lower ASR and degradation rate than Ni:CGO(ScYSZ) configuration with measured values of 0.50 Ω cm2 and 11 %/1000 h (at 0.60 A/cm2), and 0.70 Ω cm2 and 26 %/1000 h (at 0.50 A/cm2) at 1.30 V, respectively (700 °C, 50 % steam in hydrogen at the fuel side and air at the oxygen electrode side, LSC(ScYSZ) oxygen electrode).

25 ENERGY STORAGE↗
DOE OSTI2022

Quantifying the Relationship Between Microstructure and Performance in Gadolinium-Doped Ceria Infiltrated Ni/YSZ Symmetric Cells

Infiltration of mixed ionic/electronic conducting (MIEC) nanocatalysts into the anodes of solid oxide fuel cells (SOFCs) allow the hydrogen oxidation reaction (HOR) to occur at double-phase boundaries (DPBs), rather than being confined only to the triple phase boundaries (TPBs). In this research, we use a combination of cross-sectional scanning electron microscopy (SEM), three-dimensional (3-D) reconstruction, and electrochemical methods to characterize both baseline and gadolinium-doped ceria (GDC)-infiltrated symmetric cells, with the goal of establishing a comparison between the density of electrochemically active sites in uninfiltrated and GDC-infiltrated cells. Here, electrochemical impedance spectroscopy (EIS) and distribution of relaxation times (DRT) analysis showed GDC infiltration decreased the overall polarization of the anode by a factor of 8.78 X, and decreased the resistance associated with the reactions at the TPBs/DPBs by a factor of over 21 X. By quantifying expected GDC deposition morphology in the Ni/YSZ anode it is estimated that reactions occur in the baseline cell up to 84 nm from the active TPB lines.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Rate constants and third-body collision efficiencies for recombination of Na with OH and O2: Implications for flame inhibition by alkali salts

Flame inhibition by alkali metals has implications for solid fuel combustion, fire safety, and a number of industrial processes. While the mechanism of inhibition is fairly well understood, details related to thermodynamic properties and rate constants are still in question. In the present work, the recombination of Na with OH (R5) and O2 (R7), respectively, was characterized theoretically, and the implications for modeling laminar premixed hydrogen flames doped with sodium species were examined. Third-body collision efficiencies and low-pressure-limit rate constants were obtained using newly fitted ab initio-based potential energy surfaces, classical trajectories, and one-dimensional master equation calculations. The results are consistent with available experimental results and aid in the present modeling study by providing rate information for bath gases and conditions that remain unexplored experimentally. Chemical kinetic modeling of relative Na and absolute H and OH profiles in H2-fueled laminar, premixed flames doped with a sodium salt shows that the most important radical removal cycle is the sequence Na + OH (+M) → NaOH (+M) (R5), NaOH + H → Na + H2O (R12), even under oxidizing conditions. A secondary cycle, Na + O2 (+M) ⇄ NaO2 (+M) (R7), NaO2 + OH → NaOH + O2 (R14), is less important due to the low thermal stability of NaO2. In most flames, reaction R7 is partially equilibrated, and reaction R14 becomes rate-limiting for the second cycle. The flame analysis supports a lower value of k14 than indicated by recent work on KO2 + OH, but more work is required to confirm this.

Jasper, Ahren W.↗
DOE OSTI2025

Phonon-Spin Scattering from Unpaired f-electrons in U atoms and It’s Influence on Thermal Transport in Uranium-doped Thorium Dioxide Single Crystals

In this work, impact of low level of uranium (U) atom substitution on thermal conductivity of thorium dioxide (ThO2) is investigated. ThO2 is an electronic insulator with a wide optical band-gap and no unpaired electrons whose thermal transport is governed by phonons. U-substitution introduces unpaired f-electrons resulting in paramagnetic behavior of U-ThO2 at room temperature, which significantly suppresses its thermal conductivity. A single crystal of U-ThO2 with graded composition of U is grown using a hydrothermal synthesis method, and thermal conductivity measurements are performed in regions with uniform composition of U at levels of 0%, 6%, 9% and 16%. Measured thermal conductivity profiles over 77–300 K temperature range are analyzed using an analytical expression for phonon-mediated thermal transport based on Klemens-Callaway model. Temperature dependent thermal conductivity is found to deviate significantly from the Rayleigh scattering trend expected for a simple substitutional point defect with a small perturbation to mass and interatomic forces. With the resonant scattering term, observed large suppression of thermal conductivity at low temperatures can be closely reproduced. Additionally, the extracted phonon-spin coupling constants imply a nonlinear relation of phonon-spin interaction intensity with respect to U doping percentage. Our study reveals how phonon-spin scattering contributed by unpaired f-electrons in U atoms influences thermal transport in the U-ThO2 system.

36 - MATERIALS SCIENCE↗
DOE OSTI2024

Cation Migration and LSCF/SDC Decomposition Related to Long-Term Operation Mode as Revealed by Electron Microscopy

This study utilized energy dispersive spectroscopy (EDS) in a scanning electron microscope (SEM) and a scanning transmission electron microscope (STEM) in order to track cation migration and related particle decomposition for air electrode components of solid oxide cells. The influence of a Sm-doped ceria (SDC) barrier layers was assessed for three operation modes (fuel cell, electrolysis, reversible) over long time periods (1000-1500 hours). Composition profiles across air electrode/electrolyte interfaces indicated negligible accumulation of La/Sr cations to the yttria-stabilized zirconia (YSZ) electrolyte during operation. Instead, air electrode particles composed of SDC and/or La-Sr-Co-Fe-oxides (LSCF) exhibited decomposition by Sr evaporation and Sm migration to LSCF particle edges.

Picard, Yoosuf↗
DOE OSTI2021

Electrochemistry-Induced Restructuring of Tin-Doped Indium Oxide Nanocrystal Films of Relevance to CO 2 Reduction

The electrochemical reduction of CO 2 into fuels using renewable electricity presents an opportunity to utilize captured CO 2 . Electrocatalyst development has been a primary focus of research in this area. This is especially true at the nanoscale, where researchers have focused on understanding nanostructure-property relationships. However, electrocatalyst structure may evolve during operation. Indium- and tin-based oxides have been widely studied as electrocatalysts for CO 2 reduction to formate, but evolution of these catalysts during operation is not well-characterized. Here, we report the evolution of nanoscale structure of precise tin-doped indium oxide nanocrystals under CO 2 reduction conditions. We show that sparse monolayer nanocrystal films desorb from the electrode upon charging, but thicker nanocrystal films remain, likely due to an increased number of physical contacts. Upon applying a cathodic voltage of –1.0 V vs RHE or greater, the original 10-nm diameter nanocrystals are no longer visible, and instead form a larger microstructural network. Elemental analysis suggests the network is an oxygen-deficient indium-tin metal alloy. We hypothesize that this morphological evolution is the result of nanocrystal sintering due to oxide reduction. Furthermore, these data provide insights into the morphological evolution of tin-doped indium oxide nanocrystal electrocatalysts under reducing conditions and highlight the importance of post-electrochemical structural characterization of electrocatalysts.

25 ENERGY STORAGE↗
DOE OSTI2020

Phosphoric Acid-Doped Ion-Pair Coordinated PEMs with Broad Relative Humidity Tolerance

Proton exchange membrane (PEM) capable of working over a broad operating condition window is critical for successful adoption of PEM-based electrochemical devices. In this work, phosphoric acid (PA)-doped biphenyl-backbone ion-pair coordinated PEMs were prepared by quaternization of BPBr-100, a precursor polymer, with three different tertiary amines including trimethylamine, 1-methylpiperidine, and 1,2-dimethylimidazole followed by membrane casting, ion exchange reaction to hydroxide ion, and doping with PA. The resulting PA-doped ion-pair PEMs were characterized in terms of PA doping level, proton conductivity, relative humidity (RH) tolerance, thermal stability, and mechanical properties. PA doping levels were between six and eight according to acid-base titration. The size and structure of the cation group of ion-pair polymers were found to affect the PA doping level and water uptake. Proton conductivity was studied as a function of RH over a wide range of 5% to 95% RH. Stable conductivity at 80 °C was observed up to 70% RH for 10 h. Mechanical property characterization indicates that the PA doping process resulted in more ductile membranes with significantly increased elongation at break due to the plasticization effect of PA. A combination of high proton conductivity at low RH conditions, and good humidity tolerance makes this new class of PEMs great potential candidates for use in electrochemical devices such as proton exchange membrane fuel cells and electrochemical hydrogen compressors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

The quest for safer nuclear fuels

Here, to increase the safety and performance of nuclear reactors, researchers are working on developing ‘accident tolerant’ fuels. Ideally, these fuel pellets will be less susceptible to swelling and be more resistant to extreme heat. This led chemists to develop uranium dioxide (UO 2 ) doped with divalent elements, E 2+ . These dopants can introduce vacancies into the lattice that lead to larger grain sizes, which create longer pathways for fission gasses to migrate out of the grains. In undoped fuel, fission gas build-up at grain boundaries causes the fuel pellet to swell. Therefore, having larger grains that slow fission gas migration into grain boundaries is highly desired. Divalent Cr 2+ ions are a commonly explored dopant for UO 2 fuels. These materials have larger grain sizes while maintaining the dissolution kinetics of undoped UO 2 , making their long-term storage and disposal paths similarly safe. Atomistic models have suggested that Mn 2+ is a conceivable alternative doping material, with the potential to increase the sizes of grains even more than Cr 2+ dopants. As such, experimental studies are required to understand the physical chemistry and reactivity of these potential fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Reactivity-initiated accidents in two pressurized water reactor high burnup core designs

Here, this paper presents a safety analysis of two proposed core loadings for 24-month Pressurized Water Reactor (PWR) fuel cycles. This analysis focuses on reactivity-initiated accidents (RIAs) and evaluates core safety performance impacts of rod-averaged burnup limits up to 75 GWD/MTU and less than 7 % enriched UO 2 . The capabilities of Polaris, PARCS, and RELAP5-3D are leveraged to evaluate the core neutronic and thermal–hydraulic behavior for normal-operation, uncontrolled control rod withdrawal (CRW) transients, and control rod ejection (CRE) accidents. The two core designs are compared to identify features of realistic high burnup/extended enrichment core design approaches which have significant safety impact, identify experimental data needs for high-fidelity predictive modeling, and provide recommendations for future high burnup core designs. The first core design evaluated in this study was developed by Southern Nuclear Company and used an ZrB 2 Integral Fuel Burnable Absorber (IFBA) and B 4 C Wet-Annular Burnable Absorber (WABA)-based burnable poison strategy. The second core design assessed in this work used a Gd 2 O 3 -doped UO 2 burnable poison, similar to that used in boiling water reactors or French PWRs. Results indicate that fuel thermal limits are maintained for limiting CRW and hot full power (HFP) CRE transients. Cladding failure is predicted for the highest energy deposition rods in each core during limiting hot zero power (HZP) CRE accidents (where maximum radially averaged enthalpy exceeds 120 cal/g), though licensing may be permissible with a limited number of failed rods. While concerns exist regarding high critical boron concentration during steady state for the IFBA core and large plenum pressures for the gadolinia core design, the analysis demonstrates adequate safety performance during limiting RIA accident scenarios for two representative high burnup core designs. Design changes limiting plenum pressures and implementation of accident tolerant fuel (ATF) cladding features which minimize hydriding and susceptibility to pellet-cladding mechanical interaction (PCMI) are recommended for future high burnup fuel concepts. To support the technical basis for burnup limit increases, high-fidelity fuel performance models are needed to address physical effects not considered in this analysis, and high burnup irradiated fuel tests are required to extend applicability of the fuel failure limits and validate existing and future models.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗