Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamic Environments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Powerpack Testing of the J2-X Oxidizer Turbopump

The J-2X PPA-2 (Powerpack 2) test series was conducted from February through December 2012 on the A1 test stand at NASA Stennis Space Center in a joint effort between Pratt and Whitney Rocketdyne (PWR) and NASA Marshall Space Flight Center (MSFC). The series consisted of 13 tests for a total hotfire duration close to 6500 seconds. Among the chief test objectives was characterization of the capabilities of the new J-2X turbopumps. This paper concentrates on the test results pertaining specifically to the Oxidizer Turbopump (OTP) operation in liquid oxygen (LOX). The two bladed inducer configuration that was tested had a 0.81% blade height tip clearance and incorporated the B-groove modification to the inducer tunnel outboard of the inducer leading edge. Data was collected on inducer suction performance, pump radial loading, and the pump dynamic environment in LOX. Comparisons were made to prior data collected on two geometrically similar subscale inducers tested in water at NASA MSFC (70% scale) and Concepts NREC (52% scale). In overview, the results of the powerpack testing were consistent with the radial load assessment from the water tests. The inducer performed differently in the other two categories, however. The inducer suction performance capability in LOX was notably improved. This was expected and is probably attributable to thermal suppression head (TSH) effects. While the dynamic environment was similar in most aspects to water test observations, the higher order cavitation (HOC) during the powerpack testing was much more benign.

Jambusaria, Mitul↗

Rocket Engine Nozzle Side Load Transient Analysis Methodology: A Practical Approach

At the sea level, a phenomenon common with all rocket engines, especially for a highly over-expanded nozzle, during ignition and shutdown is that of flow separation as the plume fills and empties the nozzle, Since the flow will be separated randomly. it will generate side loads, i.e. non-axial forces. Since rocket engines are designed to produce axial thrust to power the vehicles, it is not desirable to be excited by non-axial input forcing functions, In the past, several engine failures were attributed to side loads. During the development stage, in order to design/size the rocket engine components and to reduce the risks, the local dynamic environments as well as dynamic interface loads have to be defined. The methodology developed here is the way to determine the peak loads and shock environments for new engine components. In the past it is not feasible to predict the shock environments, e.g. shock response spectra, from one engine to the other, because it is not scaleable. Therefore, the problem has been resolved and the shock environments can be defined in the early stage of new engine development. Additional information is included in the original extended abstract.

Shi, John J.↗

Final Report from The University of Texas at Austin for DEGAS: Dynamic Global Address Space programming environments

The Dynamic, Exascale Global Address Space programming environment (DEGAS) project will develop the next generation of programming models and runtime systems to meet the challenges of Exascale computing. Our approach is to provide an efficient and scalable programming model that can be adapted to application needs through the use of dynamic runtime features and domain-specific languages for computational kernels. We address the following technical challenges: Programmability: Rich set of programming constructs based on a Hierarchical Partitioned Global Address Space (HPGAS) model, demonstrated in UPC++. Scalability: Hierarchical locality control, lightweight communication (extended GASNet), and ef- ficient synchronization mechanisms (Phasers). Performance Portability: Just-in-time specialization (SEJITS) for generating hardware-specific code and scheduling libraries for domain-specific adaptive runtimes (Habanero). Energy Efficiency: Communication-optimal code generation to optimize energy efficiency by re- ducing data movement. Resilience: Containment Domains for flexible, domain-specific resilience, using state capture mechanisms and lightweight, asynchronous recovery mechanisms. Interoperability: Runtime and language interoperability with MPI and OpenMP to encourage broad adoption.

97 MATHEMATICS AND COMPUTING↗

Modal Correction Method For Dynamically Induced Errors In Wind-Tunnel Model Attitude Measurements

This paper describes a method for correcting the dynamically induced bias errors in wind tunnel model attitude measurements using measured modal properties of the model system. At NASA Langley Research Center, the predominant instrumentation used to measure model attitude is a servo-accelerometer device that senses the model attitude with respect to the local vertical. Under smooth wind tunnel operating conditions, this inertial device can measure the model attitude with an accuracy of 0.01 degree. During wind tunnel tests when the model is responding at high dynamic amplitudes, the inertial device also senses the centrifugal acceleration associated with model vibration. This centrifugal acceleration results in a bias error in the model attitude measurement. A study of the response of a cantilevered model system to a simulated dynamic environment shows significant bias error in the model attitude measurement can occur and is vibration mode and amplitude dependent. For each vibration mode contributing to the bias error, the error is estimated from the measured modal properties and tangential accelerations at the model attitude device. Linear superposition is used to combine the bias estimates for individual modes to determine the overall bias error as a function of time. The modal correction model predicts the bias error to a high degree of accuracy for the vibration modes characterized in the simulated dynamic environment.

Buehrle, R. D.↗

Apoplast proteome reveals that extracellular matrix contributes to multi-stress response in poplar

Riverine ecosystems, highly sensitive to climate change and human activities, are characterized by rapid environmental change to fluctuating water levels and siltation, causing stress on their biological components. We have little understanding of mechanisms by which riverine plant species have developed adaptive strategies to cope with stress in dynamic environments while maintaining growth and development. We report that poplar (Populus spp.) has evolved a systems level 'stress proteome' in the leaf-stem-root apoplast continuum to counter biotic and abiotic factors. To obtain apoplast proteins from P. deltoides, we developed pressure-chamber and water-displacement methods for leaves and stems, respectively. Analyses of 303 proteins and corresponding transcripts coupled with controlled experiments and bioinformatics demonstrate that poplar depends on constitutive and inducible factors to deal with water, pathogen, and oxidative stress. However, each apoplast possessed a unique set of proteins, indicating that response to stress is partly compartmentalized. Apoplast proteins that are involved in glycolysis, fermentation, and catabolism of sucrose and starch appear to enable poplar to grow normally under water stress. Pathogenesis-related proteins mediating water and pathogen stress in apoplast were particularly abundant and effective in suppressing growth of the most prevalent poplar pathogen Melampsora. Unexpectedly, we found diverse peroxidases that appear to be involved in stress-induced cell wall modification in apoplast, particularly during the growing season. Poplar developed a robust antioxidative system to buffer oxidation in stem apoplast. These findings suggest that multistress response in the apoplast constitutes an important adaptive trait for poplar to inhabit dynamic environments and is also a potential mechanism in other riverine plant species.

54 ENVIRONMENTAL SCIENCES↗

THE SPATIAL AND VELOCITY DISTRIBUTIONS OF HYPERVELOCITY STARS

Hypervelocity stars (HVSs) found in the Galactic halo are believed to be the dynamical products of interactions between (binary) stars and the massive black hole(s) (MBH) in the Galactic center (GC). In this paper, we investigate how the spatial and velocity distributions of HVSs are connected with their originations, ejecting mechanisms, and the dynamical environment in the GC. It has been shown that the detected HVSs are spatially consistent with being located on two thin disks (Lu et al.), one of which has the same orientation as the clockwise rotating stellar disk in the GC. Here, we perform a large number of three-body experiments of the interactions between the MBH and binary stars bound to it; and we find that the probability of ejecting HVSs is substantially enhanced by multiple encounters between the MBH and binary stars at a distance substantially larger than their initial tidal breakup radii. Assuming that the HVS progenitors are originated from the two thin disks, our simulations show that the distributions of the HVS inclination relative to the disk planes can be well reproduced by either the mechanism of tidal breakup of binary stars or the mechanism of ejecting HVSs by a hypothetical binary black hole (BBH) in the GC. However, an isotropical origination of HVS progenitors is inconsistent with the observed inclination distribution. Assuming that the detected HVSs were ejected out by tidal breakup of binary stars, its velocity distribution can be reproduced if their progenitors diffuse onto low angular momentum orbits slowly and most of the progenitors were broken up at relatively large distances because of multiple encounters. Assuming that the HVSs were ejected out by a BBH within the allowed parameter space in the GC, our simulations produce relatively flatter spectra at the high-velocity end compared with the observed ones; however, the BBH mechanism cannot be statistically ruled out, yet. Future deep surveys of HVSs and better statistics of the HVS spatial and velocity distributions should enable the ejection mechanisms of HVSs to be distinguished and shed new light on the dynamical environment surrounding the central MBH.

79 ASTRONOMY AND ASTROPHYSICS↗

Small-Angle Scattering as a Structural Probe for Nucleic Acid Nanoparticles (NANPs) in a Dynamic Solution Environment

Nucleic acid-based technologies are an emerging research focus area for pharmacological and biological studies because they are biocompatible and can be designed to produce a variety of scaffolds at the nanometer scale. The use of nucleic acids (ribonucleic acid (RNA) and/or deoxyribonucleic acid (DNA)) as building materials in programming the assemblies and their further functionalization has recently established a new exciting field of RNA and DNA nanotechnology, which have both already produced a variety of different functional nanostructures and nanodevices. It is evident that the resultant architectures require detailed structural and functional characterization and that a variety of technical approaches must be employed to promote the development of the emerging fields. Small-angle X-ray and neutron scattering (SAS) are structural characterization techniques that are well placed to determine the conformation of nucleic acid nanoparticles (NANPs) under varying solution conditions, thus allowing for the optimization of their design. SAS experiments provide information on the overall shapes and particle dimensions of macromolecules and are ideal for following conformational changes of the molecular ensemble as it behaves in solution. In addition, the inherent differences in the neutron scattering of nucleic acids, lipids, and proteins, as well as the different neutron scattering properties of the isotopes of hydrogen, combined with the ability to uniformly label biological macromolecules with deuterium, allow one to characterize the conformations and relative dispositions of the individual components within an assembly of biomolecules. This article will review the application of SAS methods and provide a summary of their successful utilization in the emerging field of NANP technology to date, as well as share our vision on its use in complementing a broad suite of structural characterization tools with some simulated results that have never been shared before.

Materials Science↗

Shuttle on-orbit dynamics

Shuttle on-orbit dynamics are outlined. Topics discussed include: on-orbit dynamic environment; on-orbit dynamic interaction; accelerated g-levels and sources; phase plane controller; maximum average RCS pulsing rate; maximum RCS accelerations; manual pulse mode; dynamic interaction; generic screening.

Fay, S.↗

Gas-rich meteorites - Probes for particle environment and dynamical processes in the inner solar system

Although the asteroids are the most plausible candidates for the parent bodies of gas-rich meteorites, dynamical theories have been adduced which favor a cometary origin in certain cases, and some recent studies have indicated that, in the case of gas-rich carbonaceous chondrites, the solar flare irradiation of grains may have occurred prior to the formation of parent bodies. Attention is presently given to advances that have been made in the multidisciplinary studies, encompassing petrography, chemistry, and radiation effects, of the gas-rich meteorites. An evaluation is undertaken of the present understanding of gas-rich meteorite origin and evolution.

Goswami, J. N.↗

Structural dynamic and control considerations for Space Station transportation node concepts

This paper discusses the results of two studies which investigated the expected low frequency dynamic characteristics of conceptual Mars and lunar transportation nodes. Both concepts are based on evolution of the assembly-complete Space Station Freedom configuration by the addition of keels, booms, and modules. Finite-element models of the concepts were developed and a set of undamped modes and frequencies was computed below 2 Hz for each concept. The modes were used as basis vectors for modal analyses describing the dynamic response of the structures to typical reboost maneuvers. The reboost maneuvers had fairly complex loading characteristics since the reaction control system (RCS) jets used for the maneuvers were off-modulated to control pitch and yaw attitude. Interaction of the dynamic response of the structure with the closed-loop attitude control system is investigated for both concepts. The elastic response in the solar dynamic region is investigated to evaluate the severity of the dynamic environment, since the solar dynamic systems have stringent sunpointing requirements which must be maintained during the reboost maneuver.

Cooper, Paul A.↗

Integration and evaluation of a simulator designed to be used within a dynamic prototyping environment

The human computer interface (HCI) prototyping environment is designed to allow developers to rapidly prototype systems so that the interface and functionality of a system can be evaluated and iteratively refined early in the development process. This keeps development costs down by modifying the interface during the requirements definition phase, thus minimizing changes that need to be made during and after flight code development. Problems occur within a system when the user interface is not adequately developed and when designers and developers have an incomplete understanding of the system requirements. A process has been developed for prototyping on-board payload displays for Space Station Freedom. This prototyping process consists of five phases: identification of known requirements, analysis of the requirements, development of a formal design representation and specification, development of the prototype, and evaluation of the prototype. The actual development of the prototype involves prototyping the displays, developing a low fidelity simulator, building of an interface (or communication) between the displays and the simulator, integration of these components, and testing to ensure that the interface does what the developer expects. This research integrates and evaluates a software tool which has been developed to serve as a simulator within the prototyping environment. The tool is being evaluated to determine whether or not it meets the basic requirements which are needed for a low fidelity simulator within this environment. In order to evaluate the architecture and its components, a human computer interface for and a simulator of an automobile have been developed as a prototype. The individual components (i.e., the interface and simulator) have been developed, and the current research was designed to integrate and test the complete working system within the prototyping environment. The following sections will describe the architecture and components of the rapid prototyping environment, the development of a system to assess the environment, and the integration and evaluation of PERCNET.

Moore, Loretta A.↗

Lucy Mission Design Strategy in a Dynamic Operations Environment from Launch Through First Asteroid Encounter

Lucy, a 12-yearlong NASA Discovery-class mission which launched on October 16, 2021will fly by several Jupiter-Trojan asteroids a t the L4 and L5 La grange points. Prior to theL4 Trojan encounter in 2027 and 2028, Lucy will utilize two Earth gravity-assist flybys and fly by two main-belt a steroids. After the L4 encounters a third Earth flyby will set up the L5 Troja n encounter in 2033. This pa per summarizes the baseline mission plan with focus on the spacecraft trajectory and the corresponding essential trajectory correction maneuvers as well as how the Lucy team adapted to many unforeseen changes to the spacecraft configuration and added an asteroid target of opportunity that required changes to the baseline mission plan. Refinement of asteroid flyby science requirements after launch also required updates to the baseline Lucy trajectory.

James V. Mcadams↗