Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELASTIC COLLISION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Analytic cross sections for 1 1S, to 1 1S to 2 1S, 1 1S to 2 1P transitions in helium by electron impact

The 1 1s yields 1 1s elastic and 1 1s yields 2 1s and 1 1s yields 2 excitation cross sections of Helium atoms by collision with a charged particle are obtained as analytic functions of incident velocity. The first order time dependent scattering theory is used. Numerical values of electron -He cross sections are obtained for incident energies in the range 30 eV to 800 eV and compared with earlier Born approximation calculations and with available experimental data. It is found that at 100 eV and above, the present results are in good agreement with the experimental results. They are also closer to the experimental results than the corresponding Born calculations.

Sukumar, C. V.↗

Theoretical studies of molecular collisions

The following subject areas are covered: (1) total integral reactive cross sections and vibrationally resolved reaction probabilities for F + H2 = HF + H; (2) a theoretical study of inelastic O + N2 collisions; (3) body frame close coupling wave packet approach to gas phase atom-rigit rotor inelastic collisions; (4) wave packet study of gas phase atom-rigit motor scattering; (5) the application of optical potentials for reactive scattering; (6) time dependent, three dimensional body frame quantal wave packet treatment of the H + H2 exchange reaction; (7) a time dependent wave packet approach to atom-diatom reactive collision probabilities; (8) time dependent wave packet for the complete determination of s-matrix elements for reactive molecular collisions in three dimensions; (9) a comparison of three time dependent wave packet methods for calculating electron-atom elastic scattering cross sections; and (10) a numerically exact full wave packet approach to molecule-surface scattering.

Kouri, Donald J.↗

Study of hypervelocity meteoroid impact on orbital space stations

Structural damage resulting in hypervelocity impact of a meteorite on a spacecraft is discussed. Of particular interest is the backside spallation caused by such a collision. To treat this phenomenon two numerical schemes were developed in the course of this study to compute the elastic-plastic flow fracture of a solid. The numerical schemes are a five-point finite difference scheme and a four-node finite element scheme. The four-node finite element scheme proved to be less sensitive to the type of boundary conditions and loadings. Although further development work is needed to improve the program versatility (generalization of the network topology, secondary storage for large systems, improving of the coding to reduce the run time, etc.), the basic framework is provided for a utilitarian computer program which may be used in a wide variety of situations. Analytic results showing the program output are given for several test cases.

Leimbach, K. R.↗

Optimal utilization of total elastic scattering cross section data for the determination of interatomic potentials

The problem of inversion is considered in relation to absolute total cross sections Q(v) for atom-atom collisions and their velocity dependence, and the glory undulations and the transition to high velocity behavior. There is a limit to the amount of information available from Q(v) even when observations of good accuracy (e.g., + or - 0.25%) are in hand over an extended energy range (from thermal energies upward by a factor of greater than 1000 in relative kinetic energy). Methods were developed for data utilization, which take full advantage of the accuracy of the experimental Q(v) measurements.

Bernstein, R. B.↗

The generalized diffusion-convection equation

Starting from the Boltzmann equation, a transport equation is derived for energetic particles in a moving magnetized plasma in which the scattering centers that keep the particles quasi-isotropic are moving with a velocity that is not necessarily the same as that of the plasma. The scattering is characterized by three very loose constraints: (1) there is a rest frame for each scatterer in which the particles scatter elastically; (2) in this frame the scattering will not disturb an isotropic distribution; and (3) the momentum transfer in an average collision may be described by a tensor operating on the particles original momentum. Since the strength of the scattering is not specified, the derivation should be as valid for plasma microturbulence as for hard-sphere scattering. The results show clearly which phenomena are responsible for tying the particles to the plasma in the transport equation.

Jones, Frank C.↗

DDFRG: Double Differential FRaGmentation Models for Proton and Light Ion Production in High Energy Nuclear Collisions: Closed Form, Analytic Formulas for Transport Codes and other Applications

New models for Double-Differential FRaGmentation (DDFRG) cross sections for proton and light ion production from high energy nucleus-nucleus collisions are developed. The proton model employs thermal production from the projectile, central fireball and target sources, and also quasi-elastic direct knockout production. Light ion production cross sections employ a hybrid coalescence model. The models are able to describe a wide range of experimental data with only a limited set of model parameters. Closed form analytic formulas for double-differential cross sections as well as single-differential energy cross sections are developed. The analytic formulas enable highly efficient computation for space radiation transport codes and other applications.

John W Norbury↗

Electron scattering by molecules. II - Experimental methods and data

Experimental techniques for measuring electron-molecule collision cross sections are briefly summarized. A survey of the available experimental cross section data is presented. The emphasis here is on elastic scattering, rotational, vibrational and electronic excitations, total electron scattering, and momentum transfer in the few eV to few hundred eV impact energy range. Reference is made to works concerned with high energy electron scattering, innershell and multi-electron excitations, conicidence methods and electron scattering in laser fields.

Trajmar, S.↗

Preliminary estimates of nucleon fluxes in a water target exposed to solar-flare protons: BRYNTRN versus Monte Carlo code

A baryon transport code (BRYNTRN) has previously been verified using available Monte Carlo results for a solar-flare spectrum as the reference. Excellent results were obtained, but the comparisons were limited to the available data on dose and dose equivalent for moderate penetration studies that involve minor contributions from secondary neutrons. To further verify the code, the secondary energy spectra of protons and neutrons are calculated using BRYNTRN and LAHET (Los Alamos High-Energy Transport code, which is a Monte Carlo code). These calculations are compared for three locations within a water slab exposed to the February 1956 solar-proton spectrum. Reasonable agreement was obtained when various considerations related to the calculational techniques and their limitations were taken into account. Although the Monte Carlo results are preliminary, it appears that the neutron albedo, which is not currently treated in BRYNTRN, might be a cause for the large discrepancy seen at small penetration depths. It also appears that the nonelastic neutron production cross sections in BRYNTRN may underestimate the number of neutrons produced in proton collisions with energies below 200 MeV. The notion that the poor energy resolution in BRYNTRN may cause a large truncation error in neutron elastic scattering requires further study.

Shinn, Judy L.↗

Comment on the accuracy of Rabitz' effective potential approximation for rotational excitation by collisions

Cross sections for rotational excitation of HCN by low-energy collisions with He have been computed with the effective-potential approximation of Rabitz (1972) and compared with accurate quantum close-coupling results. Elastic cross sections are found to agree to about 20%; inelastic cross sections agree in general magnitude, but not in detailed values for specific quantum transitions.

Green, S.↗

Low-energy electron-atom bremsstrahlung

This paper extends recent work providing an elementary calculation of bremsstrahlung and opacity associated with the scattering of low-energy electrons by neutral atoms and molecules. The method applies when the scattering potential is 'hard' or when the collision time is short, applying the classical soft-photon emission probability formula for arbitrary bremsstrahlung photon energy. However, now, in addition to correcting the probability factor for finite bremsstrahlung photon energy, another factor corrects for the reduced phase space available to the outgoing electron. The bremsstrahlung cross section and opacity are then computed directly from the elastic scattering cross section, determined experimentally or calculated; a small (approximately 10 percent) correction is computed from the anisotropic term in the elastic scattering cross section. The opacity is evaluated for electron scattering by H, He, and H2 using experimentally determined values for the elastic scattering cross section, and is compared with more elaborate calculations. The agreement is good (within 10 percent), indicating an accuracy for the general method comparable to variations among the results of different elaborate theoretical computations. The agreement seems to validate the basic approximation of short collision time even at large bremsstrahlung photon energy for electron energies and temperatures up to a few eV.

Gould, R. J.↗

User's guide to computer programs JET 5A and CIVM-JET 5B to calculate the large elastic-plastic dynamically-induced deformations of multilayer partial and/or complete structural rings

These structural ring deflections lie essentially in one plane and, hence, are called two-dimensional (2-d). The structural rings may be complete or partial; the former may be regarded as representing a fragment containment ring while the latter may be viewed as a 2-d fragment-deflector structure. These two types of rings may be either free or supported in various ways (pinned-fixed, locally clamped, elastic-foundation supported, mounting-bracket supported, etc.). The initial geometry of each ring may be circular or arbitrarily curved; uniform-thickness or variable-thickness rings may be analyzed. Strain-hardening and strain-rate effects of initially-isotropic material are taken into account. An approximate analysis utilizing kinetic energy and momentum conservation relations is used to predict the after-impact velocities of each fragment and of the impact-affected region of the ring; this procedure is termed the collision-imparted velocity method (CIVM) and is used in the CIVM-JET 5 B program. This imparted-velocity information is used in conjunction with a finite-element structural response computation code to predict the transient, large-deflection, elastic-plastic responses of the ring. Similarly, the equations of motion of each fragment are solved in small steps in time. Provisions are made in the CIVM-JET 5B code to analyze structural ring response to impact attack by from 1 to 3 fragments, each with its own size, mass, translational velocity components, and rotational velocity. The effects of friction between each fragment and the impacted ring are included.

Wu, R. W. H.↗

Approximate analysis of containment/deflection ring responses to engine rotor fragment impact.

The transient responses of containment and/or deflection rings to impact from an engine rotor-blade fragment are analyzed. Energy and momentum considerations are employed in an approximate analysis to predict the collision-induced velocities which are imparted to the fragment and to the affected ring segment. This collision analysis is combined with the spatial finite-element representation of the ring and a temporal finite-difference solution procedure to predict the resulting large transient elastic-plastic deformations of containment/deflection rings. Some comparisons with experimental data are given.

Wu, R. W.-H.↗

Molecular beams in chemistry.

The molecular-beam technique is a means for producing isolated atoms or molecules within a narrow range of speed and solid angle. The phenomena studied with molecular beams can be classified as single-particle interactions, many-particle interactions, and two particle-interactions. The results of scattering experiments fall into two categories including collisions that do not result in atomic rearrangements and collisions that do. Experimental methods are discussed, giving attention to low-energy beams, high-energy beams, and intermediate-energy beams. Examples are presented to illustrate the information that can be obtained from elastic, inelastic, and reactive scattering.

Jordan, J. E.↗

Low-Energy Elastic Electron Scattering by Atomic Oxygen

The B-spline R-matrix method is employed to investigate the low-energy elastic electron scattering by atomic oxygen. Flexible non-orthogonal sets of radial functions are used to construct the target description and to represent the scattering functions. A detailed investigation regarding the dependence of the predicted partial and total cross sections on the scattering model and the accuracy of the target description is presented. The predicted angle-integrated elastic cross sections are in good agreement with experiment, whereas significant discrepancies are found in the angle-differential elastic cross sections near the forward direction. .The near-threshold results are found to strongly depend on the treatment of inner-core short-range correlation effects in the target description, as well as on a proper account of the target polarizability. A sharp increase in the elastic cross sections below 1 eV found in some earlier calculations is judged to be an artifact of an unbalanced description of correlation in the N-electron target structure and the (N+l)-electron-collision problems.

Zatsarinny O.↗

A Generalized Weizsacker-Williams Method Applied to Pion Production in Proton-Proton Collisions

A new "Generalized" Weizsacker-Williams method (GWWM) is used to calculate approximate cross sections for relativistic peripheral proton-proton collisions. Instead of a mass less photon mediator, the method allows for the mediator to have mass for short range interactions. This method generalizes the Weizsacker-Williams method (WWM) from Coulomb interactions to GWWM for strong interactions. An elastic proton-proton cross section is calculated using GWWM with experimental data for the elastic p+p interaction, where the mass p+ is now the mediator. The resulting calculated cross sections is compared to existing data for the elastic proton-proton interaction. A good approximate fit is found between the data and the calculation.

Ahern, Sean C.↗

Finite-element nonlinear transient response computer programs PLATE 1 and CIVM-PLATE 1 for the analysis of panels subjected to impulse or impact loads

Two computer programs are described for predicting the transient large deflection elastic viscoplastic responses of thin single layer, initially flat unstiffened or integrally stiffened, Kirchhoff-Lov ductile metal panels. The PLATE 1 program pertains to structural responses produced by prescribed externally applied transient loading or prescribed initial velocity distributions. The collision imparted velocity method PLATE 1 program concerns structural responses produced by impact of an idealized nondeformable fragment. Finite elements are used to represent the structure in both programs. Strain hardening and strain rate effects of initially isotropic material are considered.

Spilker, R. L.↗

Measurement of differential atomic collision cross sections.

An apparatus for the study of differential angular scattering of atomic projectiles by gas targets is described. The design facilitates system alignment and provides for accurate reproducible location of components. The performance of the instrument is studied for scattering of H+ at 5-25 keV energies by helium and argon targets. Differential cross sections for elastic scattering and charge transfer are presented as well as total charge transfer cross sections. The coefficients for secondary electron ejection by impact of H and H+ on a metal surface are compared.

Fitzwilson, R. L.↗