Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTROSTATIC CHARGING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

The effect of environmental plasma interactions on the performance of the solar sail system

Interaction between the solar sail and the natural plasma environment were examined for deleterious impacts upon the operation of the sail and its associated payload. Electrostatic charging of the sail in the solar wind and in near earth environment were examined. Deployment problems were studied. An analysis of electromechanical oscillations coupling the sail to the natural plasma was performed. As a result of these studies, it was concluded that none of these effects will have a significant negative impact upon the sail operation. The natural environment will be significantly perturbed and this will preclude measurements of electric and magnetic fields from an attached payload.

Douglas, M.↗
NASA NTRS1977

Durable antistatic coating for polymethylmethacrylate

A durable antistatic coating is achieved on polymethylmethacrylate plastic without affecting its optical clarity by applying to the surface of the plastic a low molecular weight solvent having a high electron affinity and a high dipole moment, such as acentonitrile or nitromethane alone or in the presence of photopolymerizable monomer. The treated polymethylmethacrylate plastic dissipates most of the induced electrostatic charge and retains its optical clarity. The antistatic behavior persists after washing, rubbing and vacuum treatment.

Hadek, V.↗
NASA NTRS1981

Electrostatic discharging behaviour of Kapton irradiated with electrons

The electrostatic charging and discharging of Kapton when irradiated with monoenergetic electrons of 5 to 30 keV energy were studied. The leakage currents and rates of discharging always increased with the incident electron energy and flux, whereas the surface voltage showed a more complex behavior depending on the thickness of the material: for the thinner films it exhibited a maximum and then fell at higher energies. The surface voltage, the rate of discharging, and the peak current and total charge flow during a discharge were enhanced as the temperature was decreased from 70 C to -180 C, and were accompanied by a decreasing leakage current. Visible light or the presence of an aluminum coating on the irradiated surface caused reductions in the surface voltage and changes in the discharging characteristics. The results are discussed in terms of the leakage currents and the secondary emission of electrons. Photomicrographs taken after irradiation, and photographs of samples during irradiation, show good correlations between the positions of light flashes and of pinholes produced by the discharge arcs.

Verdin, D.↗
NASA NTRS1982

Spacecraft drag-free technology development: On-board estimation and control synthesis

Estimation and control methods for a Drag-Free spacecraft are discussed. The functional and analytical synthesis of on-board estimators and controllers for an integrated attitude and translation control system is represented. The framework for detail definition and design of the baseline drag-free system is created. The techniques for solution of self-gravity and electrostatic charging problems are applicable generally, as is the control system development.

Key, R. W.↗
NASA NTRS1981

Interaction of comets with the interplanetary medium

The interaction of solar radiation and the solar wind with a comet as it moves around the sun is discussed. The overall structure of the comet-solar wind interaction, which is believed to give rise to a tangential discontinuity surface excluding the solar wind from the cometary ionosphere, a collisionless bow shock serving to decelerate and divert the solar wind, and a weak outer shock, is considered. The variable nature of the interaction as the comet moves around the sun and as solar wind conditions vary is then examined. It is shown that the cometary neutrals play a dominant role in standing off the solar wind, particularly under quiet conditions, making the cometary ionosphere in general highly incompressible. Conditions are found under which cometary neutrals cannot penetrate the ionopause to interact with the solar wind, and the inner shock becomes a hybrid ion-neutral shock. Finally, consideration of the direct interaction of the solar wind and solar ultraviolet radiation with the cometary nucleus indicates that electrostatic charging of the surface is capable of causing transport and blow-off of cometary dust at large heliocentric distances.

Mendis, D. A.↗
NASA NTRS1984

Abrasion by aeolian particles: Earth and Mars

Estimation of the rate of aeolian abrasion of rocks on Mars requires knowledge of: (1) particle flux, (2) susceptibilities to abrasion of various rocks, and (3) wind frequencies on Mars. Fluxes and susceptibilities for a wide range of conditions were obtained in the laboratory and combined with wind data from the Viking meteorology experiment. Assuming an abundant supply of sand-sized particles, estimated rates range up to 2.1 x 10 to the minus 2 power cm of abrasion per year in the vicinity of Viking Lander 1. This rate is orders of magnitude too great to be in agreement with the inferred age of the surface based on models of impact crater flux. The discrepancy in the estimated rate of abrasion and the presumed old age of the surface cannot be explained easily by changes in climate or exhumation of ancient surfaces. The primary reason is thought to be related to the agents of abrasion. At least some sand-sized (approx. 100 micrometers) grains appear to be present, as inferred from both lander and orbiter observations. High rates of abrasion occur for all experimental cases involving sands of quartz, basalt, or ash. However, previous studies have shown that sand is quickly comminuted to silt- and clay-sized grains in the martian aeolian regime. Experiments also show that these fine grains are electrostatically charged and bond together as sand-sized aggregates. Laboratory simulations of wind abrasion involving aggregates show that at impact velocities capable of destroying sand, aggregates from a protective veneer on the target surface and can give rise to extremely low abrasion rates.

Greeley, R.↗
NASA NTRS1985

Closed loop electrostatic levitation system

An electrostatic levitation system is described, which can closely control the position of objects of appreciable size. A plurality of electrodes surround the desired position of an electrostatically charged object, the position of the objects is monitored, and the voltages applied to the electrodes are varied to hold the object at a desired position. In one system, the object is suspended above a plate-like electrode which has a concave upper face to urge the object toward the vertical axis of the curved plate. An upper electrode that is also curved can be positioned above the object, to assure curvature of the field at any height above the lower plate. In another system, four spherical electrodes are positioned at the points of a tetrahedron, and the voltages applied to the electrodes are varied in accordance with the object position as detected by two sensors.

Rhim, W. K.↗
NASA NTRS1984

Gravito-electrodynamics and the structure of planetary ring systems

Recent spacecraft observations of the Saturnian and Jovian ring systems have highlighted a plethora of interesting new phenomena associated with those regions containing fine (micron and sub-micron sized) dust. Recognizing that these dust grains, by virtue of being immersed within the planetary magnetospheres, are electrostatically charged to the point that they experience comparable gravitational and electric forces, a new 'gravito-electrodynamic' theory has been developed to describe their dynamics. This theory has been successful in explaining all these phenomena in a systematic way. In this review, the basic model and its range of validity are outlined, and its application to the Saturnian and Jovian ring systems are discussed.

Mendis, D. A.↗
NASA NTRS1985

The physics of comets

This volume of the 'Fundamentals of Cosmic Physics' is concerned with the physics of comets. Aspects regarding the nucleus are discussed, taking into account observations, radius and albedo, mass, rotation, splitting and disruption, the temperature and sublimation of the cometary nucleus, the chemical composition, the electrostatic charging of the cometary nucleus, and the structure and evolution of the cometary nucleus. Other topics explored are related to the atmosphere and its interaction with the solar wind, the plasma tail, and the dust tail. Attention is given to excitation mechanisms, atmospheric abundances and production rates, chemical models of the inner coma, collisional processes and the multifluid approach, radiative transfer, the ionization processes, models of the inner layer, the outer coma, acceleration mechanisms in the plasma tail, the structure of the plasma tail, the cometary magnetosphere, dust grain orbits, gas-dust interaction in the inner coma, and the nature of the cometary dust.

Mendis, D. A.↗
NASA NTRS1985

A Note on Jupiter's Gossamer Ring

The newly discovered gossamer ring of Jupiter, composed largely of micron-sized grains, exhibits a significant peak very near the synchronous radius. It is believed that this peak is associated with an unobserved source consisting of large bodies that straddle the synchronous orbit. An alternative evolutionary mechanism is offered, which is the gyrophase drift towards the synchronous orbit, of fine grains, which necessarily are electrostatically charged within the Jovian magnetosphere.

Mendis, D. A.↗
NASA NTRS1988

Automated seed manipulation and planting

Activities for the Fall Semester, 1987 focused on investigating the mechanical/electrical properties of wheat seeds and forming various Seed Planting System (SPS) concepts based on those properties. The Electrical Division of the design group was formed to devise an SPS using electrostatic charge fields for seeding operations. Experiments concerning seed separation using electrical induction (rearranging of the charges within the seed) were conducted with promising results. The seeds, when exposed to the high voltage and low current field produced by a Van de Graff generator, were observed to move back and forth between two electrodes. An SPS concept has been developed based on this phenomena, and will be developed throughout the Spring Semester, 1988. The Mechanical Division centered on SPS concepts involving valves, pumps, and fluids to separate and deliver seeds. An SPS idea utilizing the pressure difference caused by air as it rushes out of holes drilled in the wall of a closed container has been formulated and will be considered for future development. Also, a system of seed separation and delivery employing a combination of centrifugal force, friction, and air flow was considered.

Garcia, Ray↗
NASA NTRS1989

Processing polymeric powders

The concept of uniformly and continuously depositing and sinter-fusing nominal 0.1 to 40 microns dimensioned electrostatically charged polymer powder particles onto essentially uniformly spread 5 to 20 micron grounded continuous fiber tow to produce a respoolable thermoplastic composite two-preg was formulated at NASA Langley. The process was reduced to practice under a NASA grant at the University of Akron this spring. The production of tow-preg is called phase 1. The production of ultrafine polymer powders from 5 to 10 percent (wt) polymer solids in solvent is considered. This is phase 0 and is discussed. The production of unitape from multi tow-pregs was also considered. This is phase 2 and is also discussed. And another approach to phase 1, also proposed last summer, was scoped. This is phase 1A and is also discussed.

Throne, James L.↗
NASA NTRS1990

Hazards protection for space suits and spacecraft

A flexible multi-layered covering article for protection against the hazards of exposure to the environment of outer space is disclosed. The covering includes an outer layer section comprising an outermost lamina of woven expanded tetrafluoroethylene yarns (Gore Tex) for protecting against abrasion and tearing, an underlying weave of meta-aramid yarns (Nomex) and para-aramid yarns (Kevlar) for particle impart protection, and electrostatic charge dissipation and control system incorporated therein, and a chemical contaminants control barrier applied as a coating. A middle section includes a succession of thermal insulating layers of polymeric thermoplastic or thermoforming material, each of which is coated with a metal deposit of high infra-red emissivity and low solar radiation absorption characteristics and separated from adjacent insulating layers by a low thermal conductance material. The covering further includes a radiation attenuating layer of a tungsten-loaded polymeric elastomer binder for protecting against bremsstrahlung radiation and an inner layer of rip-stop polyester material for abrasion protection. A chloroprene coating may be supplied the polyester-material for added micrometeroid protection. Securing means of low heat conductance material secures the multi-layers together as a laminar composite.

Kosmo, Joseph J.↗
NASA NTRS1989

Combining LaRC-TPI powder with carbon fiber by electrostatic fluidized bed coating

Thermoplastic polyimide prepreg tow is produced rapidly and efficiently by applying the LaRC-TPI matrix as an electrostatically charged and fluidized powder to electrically grounded and spread carbon fiber tow. The powder is melted after coating to insure adhesion to the fibers and to reduce tow friction. Excellent wetout in towpreg samples is obtained resulting in very flexible prepregs. Processing conditions of this towpreg produced with LaRC-TPI powders from Rogers Corp. and Mitsui Toatsu Chemicals are described. Mechanical properties of the towpreg and unidirectional laminates are presented in detail.

Varughese, Babu↗
NASA NTRS1990

Coagulation of dust particles in a plasma

The electrostatic charge of small dust grains in a plasma in which the temperature varies in time is discussed, pointing out that secondary electron emission might introduce charge separation. If the sign of the charge on small grains is opposite to that on big ones, enhanced coagulation can occur which will affect the size distribution of grains in a plasma. Two scenarios where this process might be relevant are considered: a hot plasma environment with temperature fluctuations and a cold plasma environment with transient heating events. The importance of the enhanced coagulation is uncertain, because the plasma parameters in grain-producing environments such as a molecular cloud or a protoplanetary disk are not known. It is possible, however, that this process is the most efficient mechanism for the growth of grains in the size range of 0.1-500 microns.

Horanyi, M.↗
NASA NTRS1991

UV spectroscopy of Titan's atmosphere, planetary organic chemistry and prebiological synthesis. II - Interpretation of new IUE observations in the 220-335 nm range

The theoretical model developed by McKay et al. (1989) to characterize the size distribution, thermal structure, and chemical composition of the stratospheric haze of Titan is applied to new 220-335-nm albedo measurements obtained with the long-wavelength prime camera of the IUE during August 1987. Data and model predictions are presented in extensive graphs and discussed in detail. It is shown that a simple model with particles of one size at a given altitude does not accurately reproduce the observed features in all spectral regions, but that good general agreement is obtained using a model with a uniformly mixed layer at 150-600 km and a bimodal distribution of small 'polymer' haze particles (radius less than 20 nm) and larger haze particles (radius 100-500 nm). The number densities implied by this model require, however, a mechanism such as electrostatic charging or reaction kinetics to inhibit coagulation of the smaller particles.

Courtin, Regis↗
NASA NTRS1993

Transparent conductive coatings in the far ultraviolet

In certain cases a space-borne optical instrument with a dielectric window requires a transparent conductive coating deposited on the window to remove the electrostatic charge collected due to the bombardment of ionized particles. Semiconductor and metal films are studied for use as transparent conductive coatings for the front window of far ultraviolet camera. Cr is found to be the best coating material. The theoretical search for the semiconductor and metal coating materials and experimental results for ITO and Cr films are reported.

Kim, Jongmin↗
NASA NTRS1994

New jovian ring?

We follow the orbital evolution of small dust particles generated from the break up of comet Shoemaker-Levy 9 (SL9). In addition to the usual perturbations, we also consider electrostatic charging and the consequent magnetospheric effects. We show, that in about ten years following the break up, a small fraction of the dust will settle into orbits well inside the magnetosphere. The forming ring will be comprised of dust particles with radii in the range of 1.5 less than alpha less than 2.5 micrometers that follow retrograde orbits in the radial range of 4.5 less than r less than 6 R(sub J). We estimate the peak optical depth of this new ring in the range of 10(exp -8) less than tau(sub max) less than 2 x 10(exp -6).

Horanyi, Mihaly↗