Search NASA⌕ Search

SEARCH · Search NASA

Results for “EPOXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Effect of surface modification on silica supported Ti catalysts for cyclohexene oxidation with vapor-phase hydrogen peroxide

Surface modification via grafting of organic moieties on a Lewis acid catalyst (silica supported Ti catalyst, Ti-SiO 2 ) alters the activation of H 2 O 2 in vapor-phase cyclohexene epoxidation. Grafting a fluorous group (1H,1H-perfluoro-octyl) suppresses activity of Ti-SiO 2 . Conversely, grafting either a nonpolar group (octyl) or a polar aprotic group (triethylene glycol monomethyl ether) enhances rates and shifts selectivity toward trans-1,2-cyclohexanediol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electric fields imbue enzyme reactivity by aligning active site fragment orbitals

It is broadly recognized that intramolecular electric fields, produced by the protein scaffold and acting on the active site, facilitate enzymatic catalysis. This field effect can be described by several theoretical models, each of which is intuitive to varying degrees. In this contribution, we show that a fundamental effect of electric fields is to generate electrostatic potentials that facilitate the energetic alignment of reactant frontier orbitals. We apply this model to demystify the impact of electric fields on high-valent iron–oxo heme proteins: catalases, peroxidases, and peroxygenases/monooxygenases. Specifically, we show that this model easily accounts for the observed field-induced changes to the spin distribution within peroxidase active sites and explains the transition between epoxidation and hydroxylation pathways seen in Cytochrome P450 active site models. Thus, for the intuitive interpretation of the chemical effect of the field, the strategy involves analyzing the response of the orbitals of active site fragments, and their energetic alignment. We note that the energy difference between fragment orbitals involved in charge redistribution acts as a measure for the chemical hardness/softness of the reactive complex. This measure, and its sensitivity to electric fields, offers a single parameter model from which to quantitatively assess the effects of electric fields on reactivity and selectivity. Thus, the model provides an additional perspective to describe electrostatic preorganization and offers ways for its manipulation.

59 BASIC BIOLOGICAL SCIENCES↗

Combining MicroED and native mass spectrometry for structural discovery of enzyme–small molecule complexes

With the goal of accelerating the discovery of small molecule–protein complexes, we leverage fast, low-dose, event-based electron counting microcrystal electron diffraction (MicroED) data collection and native mass spectrometry. This approach, which we term electron diffraction with native mass spectrometry (ED-MS), allows assignment of protein target structures bound to ligands with data obtained from crystal slurries soaked with mixtures of known inhibitors and crude biosynthetic reactions. This extends to libraries of printed ligands dispensed directly onto TEM grids for later soaking with microcrystal slurries, and complexes with noncovalent ligands. ED-MS resolves structures of the natural product, epoxide-based cysteine protease inhibitor E-64, and its biosynthetic analogs bound to the model cysteine protease, papain. It further identifies papain binding to its preferred natural products, by showing that two analogs of E-64 outcompete others in binding to papain crystals, and by detecting papain bound to E-64 and an analog from crude biosynthetic reactions, without purification. ED-MS also resolves binding of the CTX-M-14 β-lactamase, a target of active drug development, to the non-β-lactam inhibitor, avibactam, alone or in a cocktail of unrelated compounds. These results illustrate the utility of ED-MS for natural product ligand discovery and for structure-based screening of small molecule binders to macromolecular targets, promising utility for drug discovery.

MicroED↗

Identifying the gene responsible for non‐photochemical quenching reversal in Phaeodactylum tricornutum

SUMMARY Algae such as diatoms and haptophytes have distinct photosynthetic pigments from plants, including a novel set of carotenoids. This includes a primary xanthophyll cycle comprised of diadinoxanthin and its de‐epoxidation product diatoxanthin that enables the switch between light harvesting and non‐photochemical quenching (NPQ)‐mediated dissipation of light energy. The enzyme responsible for the reversal of this cycle was previously unknown. Here, we identified zeaxanthin epoxidase 3 (ZEP3) from Phaeodactylum tricornutum as the candidate diatoxanthin epoxidase. Knocking out the ZEP3 gene caused a loss of rapidly reversible NPQ following saturating light exposure. This correlated with the maintenance of high concentrations of diatoxanthin during recovery in low light. Xanthophyll cycling and NPQ relaxation were restored via complementation of the wild‐type ZEP3 gene. The zep3 knockout strains showed reduced photosynthetic rates at higher light fluxes and reduced specific growth rate in variable light regimes, likely due to the mutant strains becoming locked in a light energy dissipation state. We were able to toggle the level of NPQ capacity in a time and dose dependent manner by placing the ZEP3 gene under the control of a β‐estradiol inducible promoter. Identification of this gene provides a deeper understanding of the diversification of photosynthetic control in algae compared to plants and suggests a potential target to improve the productivity of industrial‐scale cultures.

Ware, Maxwell A.↗

Proposed synthesis of a linear poly-ethylenimine with hydroxyl pendants substituents at the adjacent carbon

The synthesis of a linear poly-ethylenimine with pendant hydroxyl groups bonded to backbone carbons adjacent to the backbone amine groups is investigated and compared to the conventional method of functionalizing branched poly-ethylenimine using epoxides for use in direct air capture of carbon dioxide. The addition of hydroxyl groups imparts stability against both oxidative degradation and the formation of urea by reducing the number of primary amines, while the novel method of bonding to the adjacent backbone carbon rather than directly to the amine is hypothesized to retain the higher capacity for carbon dioxide of secondary amines when compared to tertiary amines. We also expect that the hydroxyl substituents will impart stronger hydrogen bonding capabilities, resulting in stronger interactions between adjacent polymer chains and a subsequent decrease in mobility.

36 MATERIALS SCIENCE↗

Novel microbial based enzymatic CO2 fixation mechanisms: Conformational control of enzymatic reactivity

The broad, long-term goal of the research is to provide insight into the mechanism of novel carboxylation and electron bifurcation reactions as paradigms to study how enzyme utilized protein conformational change to protect reactive intermediates and/or control the pathway in a catalytic cycle. catalyzed by enzymes involved in bacterial alkene, ketone, and epoxide metabolism. We are examining two paradigms in which conformational change is a key mechanistic feature of 1) protecting reaction intermediates that are sensitive to breakdown in the presence of water and 2) directing electron flow in reactions that split electron pairs along two pathways in reactions that fine tune metabolic efficiency in microbial metabolism. Both paradigms are of key importance in defining the molecular determinants of reactions relevant to CO 2 capture and fuel upcycling. In the first paradigm the compounds acetone and bicarbonate are activated by the addition of phosphate creating reaction intermediates (phosphoenolacetone and carboxyphosphate) that are very sensitive to breakdown in the presence of water. We are studying the mechanism of how the enzyme protects these reactive intermediates from water by encapsulating them upon their formation within a hydrophobic protein channel leading to an enzyme active site approximately 40 Å away. In the second paradigm, we are examining how the direction of electron transfer reactions can be modulated through protein conformational change that alters either the difference driving force or distance or both between electron transfer pathways in enzymes that catalyze electron bifurcation. We are using a combination of enzyme kinetics, mass spectrometry, spectroscopy, and structural analysis through X-ray diffraction and scattering methods to characterize the mechanism of conformational changes along the catalytic path. Within the context of the mission of the Department of Energy and the core activities of the Energy Biosciences, the results obtained in the study will reveal new insights into the fundamentals of novel carboxylation / CO 2 capture chemical transformations and electron transfer reactions that equate to biological fuel upcycling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Similarities and Differences in the Effects of Toxic Concentrations of Cadmium and Chromium on the Structure and Functions of Thylakoid Membranes in Chlorella variabilis

Trace metal contaminations in natural waters, wetlands, and wastewaters pose serious threats to aquatic ecosystems—mainly via targeting microalgae. In this work, we investigated the effects of toxic amounts of chromium and cadmium ions on the structure and function of the photosynthetic machinery of Chlorella variabilis cells. To halt the propagation of cells, we used high concentrations of Cd and Cr, 50–50 mg L –1 , in the forms of CdCl 2 x 2.5 H 2 O and K 2 Cr 2 O 7 , respectively. Both treatments led to similar, about 50% gradual diminishment of the chlorophyll contents of the cells in 48 h, which was, however, accompanied by a small (~10%) but statistically significant enrichment (Cd) and loss (Cr) of ß-carotene. Both Cd and Cr inhibited the activity of photosystem II (PSII)—but with more severe inhibitions with Cr. On the contrary, the PsbA (D1) protein of PSII and the PsbO protein of the oxygen-evolving complex were retained more in Cr-treated cells than in the presence of Cd. These data and the higher susceptibility of P700 redox transients in Cr-treated cells suggest that, unlike with Cd, PSII is not the main target in the photochemical apparatus. These differences at the level of photochemistry also brought about dissimilarities at higher levels of the structural complexity of the photosynthetic apparatus. Circular dichroism (CD) spectroscopy measurements revealed moderate perturbations in the macro-organization of the protein complexes—with more pronounced decline in Cd-treated cells than in the cells with Cr. Also, as reflected by transmission electron microscopy and small-angle neutron scattering, the thylakoid membranes suffered shrinking and were largely fragmented in Cd-treated cells, whereas no changes could be discerned with Cr. The preservation of integrity of membranes in Cr-treated cells was most probably aided by high proportion of the de-epoxidized xanthophylls, which were absent with Cd. It can thus be concluded that beside strong similarities of the toxic effects of Cr and Cd, the response of the photosynthetic machinery of C. variabilis to these two trace metal ions substantially differ from each other—strongly suggesting different inhibitory and protective mechanisms following the primary toxic events.

59 BASIC BIOLOGICAL SCIENCES↗

Exogenous Hemin alleviated cadmium stress in maize (Zea mays L.) by enhancing leaf photosynthesis, AsA-GSH cycle and polyamine metabolism

Cadmium (Cd) stress is one of the principal abiotic stresses that inhibit maize growth. The research was to explore (hemin chloride) Hemin (100 μmol L −1 ) on photosynthesis, ascorbic acid (AsA)-glutathione (GSH) cycle system, and polyamine metabolism of maize under Cd stress (85 mg L −1 ) using nutrient solution hydroponics, with Tiannong 9 (Cd tolerant) and Fenghe 6 (Cd sensitive) as experimental materials. The results showed that Hemin can increase leaf photosynthetic pigment content and ameliorate the ratio of Chlorophyll a/chlorophyll b ( Chla / Chlb ) under Cd stress. The values of ribose 1, 5-diphosphate carboxylase/oxygenase (RuBPcase) and phosphoenolpyruvate carboxylase (PEPCase), and total xanthophyll cycle pool [(violoxanthin (V), antiflavin (A) and zeaxanthin (Z)] increased, which enhancing xanthophyll cycle (DEPS) de-epoxidation, and alleviating stomatal and non-stomatal limitation of leaf photosynthesis. Hemin significantly increased net photosynthetic rate ( P n ), stomatal conductance ( g s ), transpiration rate ( T r ), photochemical quenching coefficient ( qP ), PSII maximum photochemical efficiency ( F v /F m ), and electron transfer rate ( ETR ), which contributed to the improvement of the PSII photosynthetic system. Compared with Cd stress, Hemin can reduce thiobartolic acid reactant (TBARS) content, superoxide anion radical (O 2 − ) production rate, hydrogen peroxide (H 2 O 2 ) accumulation, and the extent of electrolyte leakage (EL); decreased the level of malondialdehyde (MDA) content and increased the activities of superoxide dismutase (SOD), peroxidase (POD) and catalase (CAT); slowed the decrease in dehydroascorbic acid reductase (DHAR) and monodehydroascorbate reductase (MDHAR) activity and the increase in glutathione reductase (GR) and ascorbate peroxidase (APX) activity in leaves; promoted the increase in AsA and GSH content, decreased dehydroascorbic acid (DHA) and oxidized glutathione (GSSG), and increased AsA/DHA and GSH/GSSG ratios under Cd stress. Hemin promoted the increase of conjugated and bound polyamine content, and the conversion process speed of free putrescine (Put) to free spermine (Spm) and spermidine (Spd) in maize; decreased polyamine oxidase (PAO) activity and increased diamine oxidase (DAO), arginine decarboxylase (ADC), ornithine decarboxylase (ODC) and S-adenosylmethionine decarboxylase (SAMDC) enzyme activities in leaves under Cd stress.

Piao, Lin↗

Controlled Reduction of Graphene Oxide Using Sulfuric Acid

Sulfuric acid under different concentrations and with the addition of SO 3 (fuming sulfuric acid) was studied as a reducing agent for the production of reduced graphene oxide (RGO). Three concentrations of sulfuric acid (1.5, 5, and 12 M), as well as 12 M with 30% SO 3 , were used. The reduction of graphene oxide increased with H 2 SO 4 concentration as observed by Fourier-transformed infrared spectroscopy and X-ray photoelectron spectroscopy. It was observed that GO lost primarily epoxide functional groups from 40.4 to 9.7% and obtaining 69.8% carbon when using 12 M H 2 SO 4 , without leaving sulfur doping. Additionally, the appearance of hexagonal domain structures observed in transmission electron microscopy and analyzed by selected area electron diffraction patterns confirmed the improvement in graphitization. Although the addition of SO 3 in H 2 SO 4 improved the GO reduction with 74% carbon, as measured by XPS, the use of SO 3 introduced sulfur doping of 1.3%. RGO produced with sulfuric acid was compared with a sample obtained via ultraviolet (UV) irradiation, a very common reduction route, by observing that the RGO produced with sulfuric acid had a higher C/O ratio than the material reduced by UV irradiation. This work showed that sulfuric acid can be used as a single-step reducing agent for RGO without sulfur contamination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observation-constrained kinetic modeling of isoprene SOA formation in the atmosphere

Isoprene has the largest global non-methane hydrocarbon emission, and the oxidation of isoprene plays a crucial role in the formation of secondary organic aerosol (SOA). Two primary processes are known to contribute to SOA formation from isoprene oxidation: (1) the reactive uptake of isoprene-derived epoxides on acidic or aqueous particle surfaces and (2) the absorptive gas–particle partitioning of low-volatility oxidation products. In this study, we developed a new multiphase condensed isoprene oxidation mechanism that includes these processes with key molecular intermediates and products. The new mechanism was applied to simulate isoprene gas-phase oxidation products and SOA formation from previously published chamber experiments under a variety of conditions and atmospheric observations during the Southern Oxidant and Aerosol Studies (SOAS) field campaign. Our results show that SOA formation from most of the chamber experiments is reasonably reproduced using our mechanism, except when the concentration ratios of initial nitric oxide to isoprene exceed ~ 2, the formed SOA is significantly underpredicted. The SOAS simulations also reasonably agree with the measurements regarding the diurnal pattern and concentrations of different product categories, while the total isoprene SOA remains underestimated. The molecular compositions of the modeled SOA indicate that multifunctional low-volatility products contribute to isoprene SOA more significantly than previously thought, with a median mass contribution of ~ 57 % to the total modeled isoprene SOA. However, this contribution is intricately intertwined with IEPOX-derived SOA (IEPOX: isoprene-derived epoxydiols), posing challenges for their differentiation using bulk aerosol composition analysis (e.g., the aerosol mass spectrometer with positive matrix factorization). Furthermore, the SOA from these pathways may vary greatly, mainly dependent on the volatility estimation and treatment of particle-phase processes (i.e., photolysis and hydrolysis). Our findings emphasize that the various pathways to produce these low-volatility species should be considered in models to more accurately predict isoprene SOA formation. The new condensed isoprene chemical mechanism can be further incorporated into regional-scale air quality models, such as the Community Multiscale Air Quality Modelling System (CMAQ), to assess isoprene SOA formation on a larger scale.

54 ENVIRONMENTAL SCIENCES↗

Regenerative adsorbents of modified amines on solid supports

The invention relates to regenerative, solid sorbents for adsorbing carbon dioxide from a gas mixture, including air, with the sorbent including a modified polyamine and a solid support. The modified polyamine is the reaction product of an amine and an epoxide. The sorbent provides structural integrity, as well as high selectivity and increased capacity for efficiently capturing carbon dioxide from gas mixtures, including the air. The sorbent is regenerative, and can be used through multiple cycles of adsorption-desorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Regenerative adsorbents of modified amines on solid supports

The invention relates to regenerative, solid sorbents for adsorbing carbon dioxide from a gas mixture, including air, with the sorbent including a modified polyamine and a solid support. The modified polyamine is the reaction product of an amine and an epoxide. The sorbent provides structural integrity, as well as high selectivity and increased capacity for efficiently capturing carbon dioxide from gas mixtures, including the air. The sorbent is regenerative, and can be used through multiple cycles of adsorption-desorption.

Goeppert, Alain↗

Integrated capture and conversion of CO 2 to methanol or methanol and glycol

A process for producing methanol includes combining a hydrogenation catalyst, hydrogen, and CO 2 with a condensed phase solution comprising an amine under conditions effective to form methanol and water. A process for coproduction of methanol and a glycol includes combining an epoxide, a hydrogenation catalyst, hydrogen, and CO 2 with a condensed phase solution comprising an amine under conditions effective to form methanol and a glycol.

Kothandaraman, Jotheeswari↗

Synthesis of metal complexes and uses thereof

The present disclosure provides novel methods of making aluminum complexes with utility for promoting epoxide carbonylation reactions. Methods include reacting neutral metal carbonyl compounds with alkylaluminum complexes. For example, a compound of formula I: is reacted with a neutral metal carbonyl compound (such as Q′dMe(CO)w′) to produce an aluminum-based carbonylation catalyst:

Lee, Han↗

Metal-organic frameworks for the adsorption and catalytic transformations of carbon dioxide

Novel crystalline porous materials known as metal-organic frameworks (MOFs) and methods for their synthesis are provided herein. The MOFs include a M6(μ3-OH)8(OH)8(μ2,η2-(O2C)2cyclam)8 cluster, and a metal atom coordinated to the one or more cyclam of the cluster, wherein M is Zr or Hf, and the metal atom is any one of Cu, Ni, Cr, Ru, Co, and Gd. The MOFs can be used as an adsorbent, alone or in a medium with other components, of CO2. The MOFs can also be used as a catalyst for the transformation of CO2 and epoxides to cyclic carbonates. The MOFs can also be used in the electrochemical catalytic reduction of CO2. The MOFs can also be used for photocatalytic CO2 reduction for the production of carbon-based fossil fuels. The MOFs can also be used for light-induced nitric oxide (NO) release. The MOFs can also be used as magnetic resonance imaging (MRI) agents.

Morris, Amanda Jean↗

Continuous method for preparing carbonate esters

In one embodiment, a continuous process for preparing organic carbonate solvent of Formula (I) as described herein comprises contacting a first reactant (an alcohol) with a reactive carbonyl source (carbonyldiimidazole (CDI) or an alkylchloroformate) in the presence of a catalyst in reaction stream flowing through a continuous flow reactor at temperature 20° C. to about 160° C. and at a flow rate providing a residence time in the range of about 0.1 minute to about 24 hours; collecting a reactor effluent exiting from the continuous flow reactor; recovering a crude product from the reactor effluent; and distilling the crude product to obtain the organic carbonate compound of Formula (I). In another embodiment, the first reactant is an epoxide and the carbonyl source is carbon dioxide.

Dzwiniel, Trevor L.↗

Integrated capture and conversion of CO 2 to methane, methanol, or methanol and glycol

A process for producing methane or methanol includes combining a hydrogenation catalyst, hydrogen, and CO 2 with a condensed phase solution comprising an amine under conditions effective to form methane or methanol, and water. A process for coproduction of methanol and a glycol includes combining an epoxide, a hydrogenation catalyst, hydrogen, and CO 2 with a condensed phase solution comprising an amine under conditions effective to form methanol and a glycol.

Kothandaraman, Jotheeswari↗