Search NASA⌕ Search

SEARCH · Search NASA

Results for “Eddy viscosity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

High Reynolds number calculations using the dynamic subgrid-scale stress model

The dynamic subgrid-scale eddy viscosity model was used in the large-eddy simulation of the turbulent flow in a plane channel for Reynolds numbers based on friction velocity and channel half-width ranging between 200 and 2000, a range including values significantly higher than in previous simulations. The computed wall stress, mean velocity, and Reynolds stress profiles compare very well with experimental and direct simulation data. Comparison of higher moments is also satisfactory. Although the grid in the near-wall region is fairly coarse, the results are quite accurate: the turbulent kinetic energy peaks at y(+) of about 12, and the near-wall behavior of the resolved stresses is captured accurately. The model coefficient is o(0.001) in the buffer layer and beyond, where the cutoff wave numbers are in the decaying region of the spectra; in the near-wall region, the cutoff wave numbers are nearer the energy-containing range, and the resolved turbulent stresses become a constant fraction of the resolved stresses. This feature is responsible for the correct near-wall behavior of the model coefficient.

Piomelli, Ugo↗
NASA NTRS1977

The effect of clear-air turbulence on a model of the general circulation of the atmosphere

Mixing coefficients due to clear-air turbulence are estimated from turbulence observations from aircraft, and from large-scale dissipation estimates from the large-scale energy budgets. Maximum coefficients occur near middle-latitude jet streams, and eddy viscosity there is of order of 10 sq m/sec; eddy conductivity is estimated to be about ten times smaller. These coefficients are introduced into the 12-layer general circulation model of the National Center of Atmospheric Research. They produce an apparently significant, though small reduction in maximum speed of the jet, and a reduction in eddy energy. Further, the stratospheric polar-night jet is produced at about the correct location with about the correct intensity.

Heck, W. J.↗
NASA NTRS1982

A middle and upper tropospheric cloud model

The interplay of the various physical processes involved in the formation, maintenance, and decay of middle and upper tropospheric stratiform clouds is discussed. Ice phase fair weather cloud forms are considered. Simulations of cirriform clouds which attempt to incorporate the physical processes in an interactive manner were performed. A two dimensional time dependent Eulerian numerical model, which incorporates all of the important physical processes in a simplified way, is employed to investigate the role of these processes in the evolution of a cloud in an isolated atmospheric layer. Physical parameters considered are the eddy viscosity and the thermal, water vapor, and ice water eddy diffusivities.

Source record↗
NASA NTRS1989

The length scale for sub-grid-scale parameterization with anisotropic resolution

Use of the Smagorinsky eddy-viscosity formulation and related schemes for subgrid-scale parameterization of large eddy simulation models requires specification of a single length scale, earlier related by Lilly to the scale of filtering and/or numerical resolution. An anisotropic integration of the Kolmogoroff enstrophy spectrum allows generalization of that relationship to anisotropic resolution. It is found that the Deardorff assumption is reasonably accurate for small anisotropies and can be simply improved for larger values.

Lilly, Douglas K.↗
NASA NTRS2016

Hybrid Reynolds-Averaged/Large Eddy Simulation of the Flow in a Model SCRamjet Cavity Flameholder

Steady-state and scale-resolving simulations have been performed for flow in and around a model scramjet combustor flameholder. Experimental data available for this configuration include velocity statistics obtained from particle image velocimetry. Several turbulence models were used for the steady-state Reynolds-averaged simulations which included both linear and non-linear eddy viscosity models. The scale-resolving simulations used a hybrid Reynolds-averaged/large eddy simulation strategy that is designed to be a large eddy simulation everywhere except in the inner portion (log layer and below) of the boundary layer. Hence, this formulation can be regarded as a wall-modeled large eddy simulation. This e ort was undertaken to not only assess the performance of the hybrid Reynolds-averaged / large eddy simulation modeling approach in a flowfield of interest to the scramjet research community, but to also begin to understand how this capability can best be used to augment standard Reynolds-averaged simulations. The numerical errors were quantified for the steady-state simulations, and at least qualitatively assessed for the scale-resolving simulations prior to making any claims of predictive accuracy relative to the measurements. The steady-state Reynolds-averaged results displayed a high degree of variability when comparing the flameholder fuel distributions obtained from each turbulence model. This prompted the consideration of applying the higher-fidelity scale-resolving simulations as a surrogate "truth" model to calibrate the Reynolds-averaged closures in a non-reacting setting prior to their use for the combusting simulations. In general, the Reynolds-averaged velocity profile predictions at the lowest fueling level matched the particle imaging measurements almost as well as was observed for the non-reacting condition. However, the velocity field predictions proved to be more sensitive to the flameholder fueling rate than was indicated in the measurements.

Baurle, R. A.↗
NASA NTRS1991

Simulation of the Kolmogorov inertial subrange using an improved subgrid model

A subgrid model is developed and applied to a large-eddy simulation of the Kolmogorov inertial subrange. The subgrid model is based directly on a model of the Navier-Stokes equation. The improved subgrid model contains two terms: an eddy viscosity and a stochastic force. Use of the subgrid model in a forced large-eddy simulation results in an energy spectrum that exhibits a clear k exp -5/3 power-law subrange with an approximate value K(o) = 2.1 of the Kolmogorov constant.

Chasnov, Jeffrey R.↗
NASA NTRS1990

Application of renormalization group theory to the large-eddy simulation of transitional boundary layers

An eddy viscosity model based on the renormalization group theory of Yakhot and Orszag (1986) is applied to the large-eddy simulation of transition in a flat-plate boundary layer. The simulation predicts with satisfactory accuracy the mean velocity and Reynolds stress profiles, as well as the development of the important scales of motion. The evolution of the structures characteristic of the nonlinear stages of transition is also predicted reasonably well.

Piomelli, Ugo↗
NASA NTRS1995

On why dynamic subgrid-scale models work

Dynamic subgrid models have proved to be remarkably successful in predicting the behavior of turbulent flows. Part of the reasons for their success are well understood. Since they are constructed to generate an effective viscosity which is proportional to some measure of the turbulent energy at the high wavenumber end of the spectrum, their eddy viscosity vanishes as the flow becomes laminar. This alone would justify their use over simpler models. But beyond this obvious advantage, which is confined to inhomogeneous and evolving flows, the reason why they also work better in simpler homogeneous cases, and how they do it without any obvious adjustable parameter, is not clear. This lack of understanding of the internal mechanisms of a useful tool is disturbing, not only as an intellectual challenge, but because it raises the doubt of whether it will work in all cases. This note is an attempt to clarify those mechanisms. We will see why dynamic models are robust and how they can get away with even comparatively gross errors in their formulations. This will suggest that they are only particular cases of a larger family of robust models, all of which would be relatively insensitive to large simplifications in the physics of the flow. We will also construct some such models, although mostly as research tools. It will turn out, however, that the standard dynamic formulation is not only robust to errors, but also behaves as if it were substantially well formulated. The details of why this is so will still not be clear at the end of this note, specially since it will be shown that the 'a priori' testing of the stresses gives, as is usual in most subgrid models, very poor results. But it will be argued that the basic reason is that the dynamic formulation mimics the condition that the total dissipation is approximately equal to the production measured at the test filter level.

Jimenez, J.↗
NASA NTRS1975

Structure of turbulent jets and wakes

The structure of two-dimensional turbulent jets and wakes is studied using two eddy viscosity models. The turbulent energy equation is used together with the mean momentum equations, and the system is closed by introducing eddy coefficients. The fine structure turbulence is obtained by applying proper boundary conditions at the mean turbulent interface position. The results, after a second averaging process, are compared with available experimental data.

Wang, F. C.↗
NASA NTRS1995

Navier-Stokes Aerodynamic Simulation of the V-22 Osprey on the Intel Paragon MPP

The paper will describe the Development of a general three-dimensional multiple grid zone Navier-Stokes flowfield simulation program (ENS3D-MPP) designed for efficient execution on the Intel Paragon Massively Parallel Processor (MPP) supercomputer, and the subsequent application of this method to the prediction of the viscous flowfield about the V-22 Osprey tiltrotor vehicle. The flowfield simulation code solves the thin Layer or full Navier-Stoke's equation - for viscous flow modeling, or the Euler equations for inviscid flow modeling on a structured multi-zone mesh. In the present paper only viscous simulations will be shown. The governing difference equations are solved using a time marching implicit approximate factorization method with either TVD upwind or central differencing used for the convective terms and central differencing used for the viscous diffusion terms. Steady state or Lime accurate solutions can be calculated. The present paper will focus on steady state applications, although time accurate solution analysis is the ultimate goal of this effort. Laminar viscosity is calculated using Sutherland's law and the Baldwin-Lomax two layer algebraic turbulence model is used to compute the eddy viscosity. The Simulation method uses an arbitrary block, curvilinear grid topology. An automatic grid adaption scheme is incorporated which concentrates grid points in high density gradient regions. A variety of user-specified boundary conditions are available. This paper will present the application of the scalable and superscalable versions to the steady state viscous flow analysis of the V-22 Osprey using a multiple zone global mesh. The mesh consists of a series of sheared cartesian grid blocks with polar grids embedded within to better simulate the wing tip mounted nacelle. MPP solutions will be shown in comparison to equivalent Cray C-90 results and also in comparison to experimental data. Discussions on meshing considerations, wall clock execution time, load balancing, and scalability will be provided.

Vadyak, Joseph↗
NASA NTRS1991

Eddy damping, backscatter, and subgrid stresses in subgrid modeling of turbulence

The Brief Report demonstrates the relationship of eddy-viscosity models to subgrid stresses. A formula that determines the relative importance of the cross stress and the Reynolds stress for the net eddy-damping and backscatter contributions is derived. The cross-stress term with sharp-cut filtering is identified as an important quantity to model. These concepts could prove useful as a basis for constructing specific models for the Reynolds and cross stresses.

Zhou, YE↗
NASA NTRS1990

On neglect of nonlinear momentum terms in solar nebula accretion disk models

The standard model for accretion disks (e.g., Pringle, 1981; Lin and Papaloizou, 1985) parameterizes the radial eddy angular momentum flux which is quadratically nonlinear in velocity, solely by a viscous diffusion process which is linear in velocity. This paper shows that the eddy angular momentum flux, in addition to a gradient dissipative (viscous) flux, involves a countergradient accelerating flux. Therefore, the momentum parameterization in the standard model is in general unjustified. The formalism of the parameterization can be justified only by recognizing that the eddy viscosity used in the standard model is in fact a pseudoviscosity which includes the effects of countergradient fluxes, and which therefore may have a magnitude less than the eddy diffusivity K for mixing trace constituents in the disk.

Prinn, Ronald G.↗
NASA NTRS1995

Fully-Explicit and Self-Consistent Algebraic Reynolds Stress Models

A fully-explicit, self-consistent algebraic expression for the Reynolds stress, which is the exact solution to the Reynolds stress transport equation in the 'weak equilibrium' limit for two-dimensional mean flows for all linear and some quasi-linear pressure-strain models, is derived. Current explicit algebraic Reynolds stress models derived by employing the 'weak equilibrium' assumption treat the production-to-dissipation (P/epsilon) ratio implicitly, resulting in an effective viscosity that can be singular away from the equilibrium limit. In the present paper, the set of simultaneous algebraic Reynolds stress equations are solved in the full non-linear form and the eddy viscosity is found to be non-singular. Preliminary tests indicate that the model performs adequately, even for three dimensional mean flow cases. Due to the explicit and non-singular nature of the effective viscosity, this model should mitigate many of the difficulties encountered in computing complex turbulent flows with the algebraic Reynolds stress models.

Girimaji, Sharath S.↗
NASA NTRS1978

Large eddy simulation of incompressible turbulent channel flow

The three-dimensional, time-dependent primitive equations of motion were numerically integrated for the case of turbulent channel flow. A partially implicit numerical method was developed. An important feature of this scheme is that the equation of continuity is solved directly. The residual field motions were simulated through an eddy viscosity model, while the large-scale field was obtained directly from the solution of the governing equations. An important portion of the initial velocity field was obtained from the solution of the linearized Navier-Stokes equations. The pseudospectral method was used for numerical differentiation in the horizontal directions, and second-order finite-difference schemes were used in the direction normal to the walls. The large eddy simulation technique is capable of reproducing some of the important features of wall-bounded turbulent flows. The resolvable portions of the root-mean square wall pressure fluctuations, pressure velocity-gradient correlations, and velocity pressure-gradient correlations are documented.

Moin, P.↗
NASA NTRS1977

A spin-orbit constraint on the viscosity of a Mercurian liquid core

The escape of Mercury from the stable spin-orbit resonance in which the spin angular velocity is twice the orbital mean motion (2n) requires that the kinematic viscosity of a molten core with a laminar boundary layer be comparable to that of water (0.01 sq cm/s) and the tidal Q be less than about 100. If the boundary layer is turbulent, escape from the resonance is only consistent with a liquid core of low viscosity if the critical Reynolds number for the onset of turbulence is above about 500, the moment difference (B - A)/C is below about 0.00001, and the tidal dissipation factor Q is less than about 40. These conclusions depend on the assumptions that Mercury's obliquity was near 0 deg at the time of resonance passage, that the liquid core was not stably stratified at the time at which Mercury passed through the resonance, that a turbulent boundary layer can be characterized by a turbulent or eddy viscosity coefficient, and that the most important coupling between core and mantle is a viscous coupling at a smooth spherical boundary.

Peale, S. J.↗
NASA NTRS1994

Analysis of subgrid models using direct and large-eddy simulations of isotropic turbulence

Direct and large eddy simulations of forced and decaying isotropic turbulence have been performed using a pseudospectral and a finite-difference code. Subgrid models that include a one-equation subgrid kinetic energy model with and without a stochastic backscatter forcing term and a new scale similarity model have been analyzed in both Fourier space and physical space. The Fourier space analysis showed that the energy transfer across the cutoff wavenumber k(sub c) is dominated by local interaction. The correlation between the exact and the modeled (by a spectral eddy viscosity) nonlinear terms and the subgrid energy transfer in physical space was found to be quite low. In physical space, a similar correlation analysis was carried out using top hat filtering. Results show that the subgrid stress and the energy flux predicted by the subgrid models correlates very well with the exact data. The scale similarity model showed very high correlation for reasonable grid resolution. However, with decrease in grid resolution, the scale similarity model became more uncorrelated, when compared to the kinetic energy subgrid model. The subgrid models were then used for large-eddy simulations for a range of Reynolds number. It was determined that the dissipation was modeled poorly and that the correlation with the exact results was quite low for all the models. In general, for coarse grid resolution, the scale similarity model consistently showed very low correlation while the kinetic energy model showed a relatively higher correlation. These results suggest that to use the scale similarity model relatively fine grid resolution may be required, whereas, the kinetic energy model could be used even in coarse grid.

Menon, S.↗
NASA NTRS1992

Turbulence modelling in CFD: Present status, future prospects

Information is given in viewgraph form for turbulence modeling in computational fluid dynamics (CFD). The Eddy Viscosity Models (EVM), Algebraic Second Moment Closures (ASM), and Differential Second-Moment Closures (DSM) are considered. It is concluded that EVM's, ASM's, and DSM's will remain in use, though with a steady decline in importance of EVM's and ASM's in favor of DSM's. Improved versions of low-Re two-equation EVM's should lead to more reliable predictions of separated flows than are achievable at present. Further refinement of sub-models in second moment closures can be expected throughout this decade. There will be increasing attention given to interfacing SMC with higher order approaches such as LES, and an increased use of two-time-scale schemes providing distinct time scales for large and fairly small eddies.

Launder, Brian E.↗