Search NASA⌕ Search

SEARCH · Search NASA

Results for “Electrolytic Dissolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Atomic-scale constituting stable interface for improved LiNi 0.6 Mn 0.2 Co 0.2 O 2 cathodes of lithium-ion batteries

Ascribed to their higher capacity and lower cost compared to conventional LiCoO 2 , the Ni-rich layered LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) is now considered as one promising cathode for lithium-ion batteries (LIBs). However, it still suffers from some evident performance degradation, especially under high cutoff voltages (i.e., >4.3 V versus Li/Li + ). The performance degradation typically is exhibited as capacity fading and voltage drop, mainly originating from an instable interface between the NMC622 and electrolyte as well as the evolution of the NMC structure. To improve the interfacial and structural stability of NMC cathodes, herein we deposited an ultrathin layer of Al 2 O 3 coatings (<5 nm) conformally over NMC622 composite electrodes directly using atomic layer deposition (ALD). It was found that, under different upper cutoff voltages (4.3, 4.5, and 4.7 V), the ALD Al 2 O 3 coatings enable enhanced performance of NMC622 cathodes with better cyclability and higher capacity. Particularly, the beneficial effects of the ALD Al 2 O 3 coatings are more remarkable at higher upper cutoff voltages (4.5 and 4.7 V). Furthermore, the ALD coatings can significantly improve the rate capability of NMC622. To this end, we utilized a suite of characterization tools and performed a series of electrochemical tests to clarify the effects of the ALD Al 2 O 3 coatings. This study revealed that the beneficial effects of the Al 2 O 3 ALD coatings are multiple: (i) serving as an artificial layer of solid electrolyte interphase to mitigate undesirable interfacial reactions; (ii) acting as a physical barrier to inhibit metal dissolution of NMC; and (iii) forming a reinforced networked overcoating to boost the mechanical integrity of NMC cathodes. This study is favorable for designing high-performance NMC cathodes.

25 ENERGY STORAGE↗
DOE OSTI2026

Solvation-guided inhibition of manganese dissolution of lithium- and manganese- rich cathode via cyclic carbonate molecular engineering

Lithium and manganese-rich (LMR) layered oxides represent a leading class of high-energy cathode materials, but their practical realization is fundamentally limited by severe manganese (Mn) dissolution, a process that triggers structural degradation and rapid capacity fade. While mitigation efforts have predominantly focused on interfacial engineering, the intrinsic contribution of bulk electrolyte solvation to this degradation pathway remains largely unexplored, primarily due to the difficulty of deconvolving its effects from concurrent cathode-electrolyte interphase (CEI) formation. Here, we report an experimental design to isolate the role of solvation. We systematically varied the electrolyte solvent solvation power by substituting the strongly coordinating ethylene carbonate (EC) with its weaker coordinating fluorinated derivatives, fluoroethylene carbonate (FEC) and trans-4,5-Difluoro-1,3-dioxolan-2-one (DFEC), while maintaining a consistent interfacial chemistry. Remarkably, the electrolyte formulated with the weakest solvent, DFEC, exhibits superior cycling stability, suppressing Mn dissolution by up to 63% relative to the conventional EC-based system. Post-mortem analysis unequivocally attributes this performance enhancement to the preservation of the LMR cathode's structural integrity, a direct consequence of mitigated Mn dissolution. This work provides conclusive evidence that modulating bulk electrolyte solvation is a potent and direct strategy for stabilizing LMR cathodes, establishing a vital design principle for next-generation battery systems.

25 ENERGY STORAGE↗
DOE OSTI2022

Crosslinked Polyethyleneimine Gel Polymer Interface to Improve Cycling Stability of RFBs

Redox flow batteries are considered a promising technology for grid energy storage. However, capacity decay caused by crossover of active materials is a universal challenge for many flow battery systems, which are based on various chemistries. In this paper, using the vanadium redox flow battery as an example, we demonstrate a new gel polymer interface (GPI) consisting of crosslinked polyethyleneimine with a large amount of amino and carboxylic acid groups introduced between the positive electrode and the membrane. The GPI functions as a key component to prevent vanadium ions from crossing the membrane, thus supporting stable long-term cycling. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) measurements were conducted to investigate the effect of GPI on the electrochemical properties of graphitic carbon electrodes (GCFs) and redox reaction of catholyte. X-ray photoelectron spectroscopy (XPS) and 1 H nuclear magnetic resonance (NMR) spectra demonstrated that the crosslinked GPI is chemically stable for 100 cycles without dissolution of polymers and swelling in the strong acidic electrolytes. Results from inductively coupled plasma mass spectrometry (ICP-MS), Fourier-transform infrared (FTIR) spectroscopy, and energy-dispersive X-ray (EDX) spectroscopy proved that the GPI is effective in maintaining the concentration of vanadium species in their respective half-cells, resulting in improved cycling stability because of it prevents active species from crossing the membrane and stabilizes the oxidation states of active species.

Lim, Hyung-Seok↗
DOE OSTI2020

Probing the Radial Chemistry of Getter Components in Light Water Reactors via Controlled Electrochemical Dissolution

Getters are among the key functional components in the Tritium Producing Burnable Absorber Rods (TPBARs) of Light Water Reactors, and are used to capture the released tritium gas. They are cylindrical tubes comprised of the alloy zircaloy-4 which is coated with nickel plating both internally and externally. Their exposure to tritium as well as the irradiation environments in the light water reactors changes their structure, chemical composition and chemistry. Understanding the radial tritium distribution is key to gaining insight into the evolution of new chemistry upon irradiation in order to predict getter performance. Consequently, efforts are underway to devise a method that can allow selective probing into the getter core radially to probe the chemistry akin to carefully and selectively peeling of the layers of an onion. We have recently devised an electrochemical dissolution technique for controlled radial dissolution of zirconium based liners; this work describes the first proof-of-concept demonstration of the applicability of this technique on the controlled radial dissolution of nickel plated getters. The technique is complemented with periodic analysis of the electrolyte solution to measure the rates of release of the various elemental components and therefore glean information on their radial distribution across the getter; further complementary microscopy on the exposed surfaces allows us insight into the chemistry at the getter core.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Achieving Stable Molybdenum Oxide Cathodes for Aqueous Zinc-Ion Batteries in Water-in-Salt Electrolyte

A layered MoO 3 material with large interlayer spacing represents a promising cathode for aqueous rechargeable Zn-ion batteries (ARZIBs), but the implementation of this material is limited due to the intrinsically low conductivity and poor structural stability. A 30 m ZnCl 2 water-in-salt electrolyte (WISE) was introduced to a MoO 3 nanobelt cathode for the first time, significantly increasing the stability of MoO 3 cathodes compared to those in 3 M ZnSO 4 and 3 M ZnCl2 electrolyte. The Zn/MoO 3 cell in WISE unambiguously demonstrated significantly improved rate performance delivering 349, 253, and 222 mAh/g at 100, 500, and 1000 mA/g, denoting a 2×, and 12× capacity increase of those achieved in 3 M electrolytes at 500 and 1000 mA/g, respectively. A capacity retention rate of 73% was achieved after (dis)charging at 100 mA/g for 100 cycles, and no obvious capacity fading was observed at higher current densities of 500 mA/g and 2A/g. A compilation of structural and morphological characterization was systematically performed to provide insight into the mechanisms of the improved performance in ZnCl 2 WISE for the MoO3 cathode materials. Specifically, our data collectively suggested that the drastic fading in 3M electrolytes can be attributed to the parasitic surface deposits on Zn originated from Mo dissolution and H 2 formation due to Zn corrosion and hydrogen evolution reaction (HER), which were significantly suppressed in the ZnCl 2 WISE. The direct visualization of these side reactions was achieved for the first time in the Zn-MoO 3 system, using an in situ optoelectrochemical measurement.

25 ENERGY STORAGE↗
DOE OSTI2021

Decoupling Proton and Cation Contributions to Capacitive Charge Storage in Birnessite in Aqueous Electrolytes

Abstract Nanostructured birnessite is of interest as an electrode material for aqueous high power electrochemical energy storage as well as desalination devices. In neutral pH aqueous electrolytes, birnessite exhibits a capacitive response attributed to the adsorption of cations and protons at the outer surface and within the hydrated interlayer. Here, we utilize the understanding of proton‐coupled electron transfer (PCET) in buffered electrolytes to decouple the role of protons and cations in the capacitive charge storage mechanism of birnessite at neutral pH. We find that without buffer, birnessite exhibits primarily potential‐independent (capacitive) behavior with excellent cycling stability. Upon the addition of buffer, the capacity initially increases and the cyclic voltammograms become more potential‐dependent, features attributed to the presence of PCET with the birnessite. However, long‐term cycling in the buffered electrolyte leads to significant capacity fade and dissolution, which is corroborated through ex situ characterization. ReaxFF atomistic scale simulations support the observations that proton adsorption leads to birnessite degradation and that capacitive charge storage in birnessite is primarily attributed to cation adsorption at the outer surface and within the interlayer.

Saeed, Saeed↗
DOE OSTI2020

Electrochemical Salt Wasteform Development: A Review of Salt Treatment and Immobilization Options

Electrochemical reprocessing, also referred to as pyroprocessing, is a technique for recycling actinides from used nuclear fuel (UNF) to produce fuel for future reactors. Here, UNF is dissolved in a molten salt (e.g., LiCl-KCl eutectic) within an electrorefiner. After UNF dissolution, fission products are released into the electrolyte salt and converted to chlorides. This paper discusses wasteform options for processing the base electrolyte salt with the fission product salts as well as just the rare-earth fission products (as RECl 3 , REOCl, or REO x ) with the intent of finding optimal methods for reducing total waste salt volumes or partitioning the salt for alternate wasteform options. Furthermore, two of the more detailed partitioning options discussed herein include halide removal from the salt (dehalogenation), which accounts for more than half of the salt on a molar basis, and RE fission product removal for wasteforms with high-RE loadings. Wasteform properties are compared with emphasis on wasteform volume starting from a given amount of (1) total salt cations or (2) RE cations. Comparisons are also made of wasteform chemical durabilities, with the data available from like testing methods. A main conclusion from this work is the justification of subsequent salt processing after electrorefiner operations for achieving significant wasteform volume reduction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Operation-Induced BiVO4 Surface Reconstruction Modulates Photoelectrochemical Glycerol Photooxidation Stability and Activity

Abstract Operation-induced surface reconstruction of photoelectrodes is underexplored as a path to control stability and performance. We show how adaptive junctions form via surface reconstruction of BiVO4 during glycerol photooxidation and how these surfaces affect electrolyte-dependent kinetics and durability. Preferential V dissolution in both acidic and alkaline media forms a Bi-rich layer. In situ measurements through a dual-working-electrode platform quantify the changes in photovoltage and charge-transfer resistance derived from adaptive junction formation, while enabling quantitative separation of the driving forces for charge separation and interfacial catalysis. The reconstructed surface in acidic media improves hole-transfer kinetics, functions as a glycerol-oxidation catalyst, and imparts photostability. Surface reconstruction in alkaline media exhibits the opposite behavior, impeding hole injection. This instability is mitigated by trace Ni2+ ions, which drive in situ surface activation without cocatalyst pre-deposition. This study shows the significance of surface reconstruction in the design of durable photoelectrodes for applications targeting organic electro-oxidation.

Yang, Jin Wook↗
NASA NTRSDate not supplied

Preliminary Testing of Electrolytic Silver Ion Generation for Spacecraft Potable Water Systems

Anodic dissolution of silver electrodes, or “silver electrolysis,” is being investigated as a means of imparting biocidal silver into potable water on exploration spacecraft. This method of water disinfection is used commercially in hospitals and marine vessels, but the spacecraft application poses unique challenges such as low water conductivity, increased importance of electrode longevity, and an interface with other systems that may be sensitive to any particles released in the electrolysis process. Testing has shown that due to the low conductivity of the water, the electroactive area of the cell can be scaled linearly to achieve a target electrolysis current despite the general non-linearity of electrochemical systems. More importantly, however, the low conductivity dictates that a large electroactive area and minimal electrode gap be employed in the design. Furthermore, thermodynamic considerations suggest that a low applied voltage is necessary to avoid undesired electrode reactions that could negatively impact long-term performance. Preliminary testing of long-term electrode health suggests that anodic oxide formation may not present as significant a challenge as anticipated; however, further testing in a system closed to the atmosphere is required to rule out the influence of atmospheric CO2 on the pH of the process water. Comparison of filtered and unfiltered silver concentration measurements indicates that release of particles larger than 0.2 μm was negligible in this preliminary test. A test article has been developed to facilitate further testing of silver electrolysis, which continues to be a candidate technology for spacecraft potable water disinfection.

silver↗
DOE OSTI2026

Modulating Li + and Polysulfide Solvation with Low-Density Moderately Solvating Electrolytes for Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries show great promise as the next-generation rechargeable batteries, yet they still suffer from polysulfide shuttling and interphasial instability. Electrolyte, as the medium for ion transport and sulfur conversion, plays a crucial role in overcoming these challenges. Here, we introduce a moderately solvating electrolyte (MSE) based on low-density, low-viscosity, and nonfluorinated ether co-solvents that balances polysulfide suppression, Li metal stabilization, and redox kinetics. Through multiple solvent–solvent and solvent-ion interactions, the optimized MSE weakens Li + -solvent pairing while strengthening cation–anion interactions, thereby lowering the desolvation barrier and promoting the formation of a favorable solid–electrolyte interphase (SEI). Meanwhile, MSE limits the polysulfide dissolution but improves the accessibility of active material through better wettability and tailored solvation environment, leading to an altered sulfur deposition mechanism with β – α conversion. This approach enables a stable cycling of high-mass loading Li–S cells (> 3.5 mg cm -2 ) at both room temperature and 45 °C (where shuttling and side reactions are severer), and demonstrates a pouch cell with lean electrolyte content (4.5 µL mg s -1 ). This work highlights a practical route to develop high-performance electrolyte for Li–S cells and provides mechanistic insights into their operation.

25 ENERGY STORAGE↗
DOE OSTI2020

In Situ Construction of Uniform and Robust Cathode–Electrolyte Interphase for Li-Rich Layered Oxides

The high-energy-density Li-rich layered oxides (LLOs) as promising cathodes for Li-ion batteries suffer from the dissolution of transition metals (especially manganese) and severe side reactions in conventional electrolytes, which greatly deteriorate their electrochemical performance. Herein, an in situ “anchoring + pouring” synergistic cathode-electrolyte interphase (CEI) construction is realized by using 1,3,6-hexanetricarbonitrile (HTCN) and tris(trimethylsilyl) phosphate (TMSP) electrolyte additives to alleviate the challenges of an LLO (Li 1.13 Mn 0.517 Ni 0.256 Co 0.097 O 2 ). HTCN with three nitrile groups can tightly anchor transition metals by coordinative interaction to form the CEI framework, and TMSP will electrochemically decompose to reshape the CEI layer. The uniform and robust in situ constructed CEI layer can suppress the transition metal dissolution, shield the cathode against diverse side reactions, and significantly improve the overall electrochemical performance of the cathode with a discharge voltage decay of only 0.5 mV/cycle -1 . Further investigations based on a series of experimental techniques and theoretical calculations have revealed the composition of in situ constructed CEI layers and their distribution, including the enhanced HTCN anchoring effect after lattice densification of LLOs. Finally, this study provides insights into the in situ CEI construction for enhancing the performance of high-energy and high-voltage cathode materials through effective, convenient and economical electrolyte approaches.

25 ENERGY STORAGE↗
DOE OSTI2021

Stabilizing electrode–electrolyte interfaces to realize high-voltage Li||LiCoO 2 batteries by a sulfonamide-based electrolyte

High-voltage lithium-metal batteries (LMBs) with LiCoO 2 (LCO) as the cathode have high volumetric and gravimetric energy densities. However, it remains a challenge for stable cycling of LCO >4.5 V Li . Here we demonstrate that a rationally designed sulfonamide-based electrolyte can greatly improve the cycling stability at high voltages up to 4.7 V Li by stabilizing the electrode–electrolyte interfaces (EEIs) on both the Li-metal anode (LMA) and high-voltage LCO cathode. With the sulfonamide-based electrolyte, commercial LCO cathodes retain 89% and 85% of their capacities after 200 and 100 cycles under high charging voltages of 4.55 V Li and 4.6 V Li , respectively, significantly outperforming traditional carbonate-based electrolytes. The surface degradation, impedance growth, and detrimental side reactions in terms of gas evolution and Co dissolution are well suppressed. Our work demonstrates a promising strategy for designing new electrolytes to realize high-energy Li||LCO batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

Crossover Effects in Lithium–Metal Batteries with a Localized High Concentration Electrolyte and High–Nickel Cathodes

While crossover effects, such as transition–metal dissolution, are well–understood in lithium–ion batteries, there is a limited understanding of the effect of crossed–over chemical species in cells with oxide cathodes and lithium–metal anodes. In this work, the effects of cathode–to–anode and anode–to–cathode crossover are explored in cells with a high–nickel cathode, lithium–metal anode, and a localized high–concentration electrolyte (LHCE). Dramatic differences are found among cells; a lithium–metal anode paired with a high–nickel cathode has three times less solid–electrolyte interphase growth than a lithium–metal anode paired with lithium metal. Meanwhile, the cathode paired with lithium metal has 2–3 times higher capacity fade than the same cathode paired with graphite. Decomposition and crossover of the FSI salt is identified as the main source of these changes. The fluorine in the salt is first stripped off at the lithium–metal anode, and the remaining sulfur and nitrogen cross over to the cathode. Although the reduction in fluorine content harms the surface stability of the cathode, the lithium–metal anode benefits from the increased fluorine content. Furthermore, because the lithium–metal anode is typically the bottleneck for cells with thin lithium, crossover is a major factor in the enhanced performance of lithium–metal batteries with LHCE.

25 ENERGY STORAGE↗
DOE OSTI2023

Mastering the synergy between Na 3 V 2 (PO 4 ) 2 F 3 electrode and electrolyte: A must for Na-ion cells

Sodium-ion batteries are emerging as suitable energy storage devices for special applications such as high-power devices with the advantages of being cheaper and more sustainable than the Li-ion equivalents. The sodium ion cells consisting of polyanionic Na 3 V 2 (PO 4 ) 2 F 3 - hard carbon electrodes exhibit high power rate capabilities but limited cycle life, especially at high temperatures. To circumvent this drawback we herein conducted in-depth analyses of the origins of structural degradations occurring in Na 3 V 2 (PO 4 ) 2 F 3 electrodes upon long cycling. Vanadium dissolution with associated parasitic reactions is identified as one of the major reasons for cell failure. Its amount varies depending on the electrolyte, with NaTFSI-based electrolyte showing the least vanadium dissolution as the TFSI - anion decomposes without producing acidic impurities, in contrast to the NaPF 6 -based electrolyte. The dissolved vanadium species undergoes oxidation and reduction processes at the Na 3 V 2 (PO 4 ) 2 F 3 and HC electrodes, respectively, with the electrochemical signature of these processes being used as a fingerprint to identify state of health of the 18650 cells. Here, having found that surface reactivity is the primary cause of vanadium dissolution we provide methods to mitigate it by combining surface coating and optimized electrolyte formulation.

25 ENERGY STORAGE↗
DOE OSTI2022

In-situ visualization of the transition metal dissolution in layered cathodes

Transition metal dissolution in layered cathodes is one of the most intractable issues that deteriorates the battery performance and lifetime. It not only aggravates the structure degradation in cathode, but also damages the solid electrolyte interphase in anode and even induce the formation of lithium dendrites. In this work, we investigate the dissolution behaviors of polycrystalline and single-crystalline layered cathode via operando X-ray imaging techniques. The described cathode particle morphology appears to have a significant impact on the evolution of the dissolution dynamics. As a mitigation strategy, we reveal that doping with trace amount of Zr in the layered cathode could improve its robustness against the transition metal dissolution. Our finding provides valuable insights for designing the next-generation highly-stable layered battery cathodes.

25 ENERGY STORAGE↗
NASA NTRS2019

A Multi-Physics Study on High-Specific Power Li-O2 Batteries for Electric Aircraft

Commercialization of lithium-air batteries faces many challenges, such as electrolyte decomposition, short cycle life, low energy and power density, etc. However, commercialization of Li-O2 batteries for aeronautics is much more challenging due to additional safety constraints on cyclability and performance (high specific power and specific energy). For this presentation, we will discuss inter-related aspects of physics-based modeling of a pack: cell and battery model calibration. In addition, we will evaluate and present optimal battery designs for high discharge current density, high discharge time, and low battery mass using simulation-based optimization.The Finite Element Model (FEM) used to simulate a Li-O2 cell is based on the work of Bevara [1]. The different aspects of the model are based on: porous electrode theory and concentrated electrolyte theory; quantum tunneling model for the resistance of conformal layer of discharge product (Li2O2) [1]; Butler-Volmer kinetics for electrochemical reaction; Fick's diffusion for oxygen transport; and an oxygen dissolution model is applied at the air/electrolyte interface [2]. The electrolyte properties such as ion conductivity, ion diffusion, oxygen diffusion, and mass density of the electrolyte were taken from Molecular Dynamics (MD) simulations [3]; while the other model parameters, which includes mass of cell components, were calibrated to match experiments at high discharge current densities. The cell mass includes the anode, cathode, separator, electrolyte, and other components (such as current collector). This calibrated model is used to perform parametric studies on cathode thickness, porosity, tortuosity, carbon particle size, electrolyte transport and material properties, partial pressure of oxygen, discharge time, and discharge current density to study optimal designs for high specific power and energy. References:1. Bevara, V. & Andrei, P. (2014), J. Electrochem. Soc. 161 (14), A2068-A2079.2.Mehta, M. & Andrei, P. (2015), J. Power Sources. 286, 299-308.3.Liyana-Arachchi, T.; Haskins, J.; Burke, C.; Diederichsen, K.; McCloskey, B.; & Lawson, J. (2018), J. Phys. Chem. B. 122 (36), 8548 - 8559.4.Choi, W.; Kikumoto, H.; Choudhary, R. & Ooka, R. (2018), Applied Energy, 209, 306-321.

Mehta, Mohit↗
DOE OSTI2022

Performance Leap of Lithium Metal Batteries in LiPF 6 Carbonate Electrolyte by a Phosphorus Pentoxide Acid Scavenger

Phosphorus pentoxide (P 2 O 5 ) is investigated as an acid scavenger to remove the acidic impurities in a commercial lithium hexafluorophosphate (LiPF 6 ) carbonate electrolyte to improve the electrochemical properties of Li metal batteries. Nuclear magnetic resonance (NMR) measurements reveal the detailed reaction mechanisms of P 2 O 5 with the LiPF 6 electrolyte and its impurities, which removes hydrogen fluoride (HF) and difluor-ophosphoric acid (HPO 2 F 2 ) and produces phosphorus oxyfluoride (POF 3 ), OF 2 P-O-PF 5 - anions, and ethyl difluorophosphate (C 2 H 5 OPOF 2 ) as new electrolyte species. The P 2 O 5 -modified LiPF 6 electrolyte is chemically compatible with a Li metal anode and LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) cathode, generating a PO x F y -rich solid electrolyte interphase (SEI) that leads to highly reversible Li electrodeposition, while eliminating transition metal dissolution and cathode particle cracking. The excellent electrochemical properties of the P 2 O 5 -modified LiPF6 electrolytes are demonstrated on Li||NMC622 pouch cells with 0.4 Ah capacity, 50 mu m Li anode, 3 mAh cm -2 NMC622 cathode, and 3 g Ah -1 electrolyte/capacity ratio. The pouch cells can be galvanostatically cycled at C/3 for 230 cycles with 87.7% retention.

25 ENERGY STORAGE↗
DOE OSTI2026

Advanced LiFSI-LiPF6 Electrolyte for Wide-Temperature and Thermally Stable Lithium-Ion Batteries

A new optimized LiFSI–LiPF6 dual-salt controlled-solvation electrolyte (E-DS) is demonstrated to enable practical graphite||LiNi0.8Mn0.1Co0.1O2 cells (˜4.0 mAh cm?²) to achieve exceptional performance and safety under extreme conditions. By optimizing anion coordination with the smaller, more dissociating FSI? anion, the E-DS forms ultrathin, dense, and inorganic-rich electrode/electrolyte interphases that dramatically suppress solvent decomposition, transition-metal dissolution, and surface reconstruction compared to the conventional LiPF6/carbonate electrolyte. Consequently, E-DS cells deliver >78% capacity retention after 300 cycles at 60 °C, retain fast discharging capacity at 30 °C, and operate effectively at -20 °C. Most strikingly, fully charged full cells with E-DS, even under overcharging to 4.8 V, show a lower heat evolution in stable formulations — transforming a traditionally unstable high-voltage/high-temperature configuration into an intrinsically safe state. This work establishes a new benchmark for carbonate-containing electrolytes, simultaneously achieving high energy density, fast-discharging capability, wide-temperature operation (-20 to 60 °C), and outstanding thermal safety in nickel-rich lithium-ion batteries.

electrode/electrolyte interphase↗