Interleaved shielding for cables
Interleaved wrapping of metal foil shielding on power cables gives more effective electromagnetic interference protection without increasing amount of material or weight.
Read, G. R.↗
SEARCH · Search NASA
Results for “Electromagnetic Interference”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Isolator/retainer for connectors
Double-ended cap holds mating plugs and receptacle, preventing electrical contact between them when not in use. Cap maintains continuous electrical ground between plug and receptacle protecting against electromagnetic-interference pickup. Device is also useful for isolation of sensitive circuits from each other during storage, transit, or testing.
Alpenia, J. L.↗
Fiber-optic proximity sensor
Proximity sensor for mechanical hand of remote manipulator incorporates fiber optics to conduct signals between light source and light detector. Fiber optics are not prone to noise from electromagnetic interference and radio-frequency interference as are sensors using long electrical cables.
Bejczy, A. K.↗
Low-EMI solid-state relay
Solid state relay electromagnetic interference (EMI) generated when switching ac power to load. Relay could find uses in circuits that are particularly susceptible to electrical noise or contain sensitive components.
Muska, W. D.↗
Improved battery charger for electric vehicles
Polyphase version of single-phase "boost chopper" significantly reduces ripple and electromagnetic interference (EMI). Drive circuit of n-phase boost chopper incorporates n-phase duty-cycle generator; inductor, transistor, and diode compose chopper which can run on single-phase or three-phase alternating current or on direct current. Device retains compactness and power factors approaching unity, while improving efficiency.
Rippel, W. E.↗
Ground/bonding for Large Space System Technology (LSST)
The influence of the environment and extravehicular activity remote assembly operations on the grounding and bonding of metallic and nonmetallic structures is discussed. Grounding and bonding philosophy is outlined for the electrical systems and electronic compartments which contain high voltage, high power electrical and electronic equipment. The influence of plasma and particulate on the system was analyzed and the effects of static buildup on the spacecraft electrical system discussed. Conceptual grounding bonding designs are assessed for capability to withstand high current arcs to ground from a high voltage conductor and electromagnetic interference. Also shown were the extravehicular activities required of the space station and or supply spacecraft crew members to join and inspect the ground system using manual on remote assembly construction.
Dunbar, W. G.↗
Cables and connectors for Large Space System Technology (LSST)
The effect of the environment and extravehicular activity/remote assembly operations on the cables and connectors for spacecraft with metallic and/or nonmetallic structures was examined. Cable and connector philosophy was outlined for the electrical systems and electronic compartments which contain high-voltage, high-power electrical and electronic equipment. The influence of plasma and particulates on the system is analyzed and the effect of static buildup on the spacecraft electrical system discussed. Conceptual cable and connector designs are assessed for capability to withstand high current and high voltage without danger of arcs and electromagnetic interference. The extravehicular activites required of the space station and/or supply spacecraft crew members to join and inspect the electrical system, using manual or remote assembly construction are also considered.
Dunbar, W. G.↗
Design and performance of the International Sun-Earth Explorer power systems
The launches of the International Sun-Earth Explorers in October 1977 (ISEE-A) and August 1978 (ISEE-C) marked the first successful implementation of an electrostatically clean spacecraft design on a US-built satellite. The power subsystem design selected was required to operate without induced or coupled electromagnetic interference while meeting the criteria of low cost, low weight (with the resulting removal of almost all redundancy), modular construction techniques, long life (more than 3 years), and maximum utilization of previously qualified/flown designs. To save money, both the ISEE-A and -C power subsystem designs had to be identical even though the two missions are flown in vastly different orbits. Additionally, the requirement for a three year mission utilizing a single silver-cadmium battery had never been imposed before. A power subsystem configuration which met all of the specified requirements was developed. Excellent correlation between preflight and actual flight performance is demonstrated.
Obenschain, A. F.↗
Boltless Seal for Electronic Housings
Spring clips seal housings for electronic circuitry, preventing electromagnetic interference from entering or leaving housings. Clips also keep dust out of housing. Since no bolts are used, housing can be opened quickly; unlike bolts, clips can be used on thin-walled housing. Seal was developed for an X-band array amplifier.
Dawe, R. H.↗
Goldstone radio spectrum protection
Potential electromagnetic interference to the Goldstone tracking receivers due to neighboring military installations is discussed. Coordination of the military and NASA Goldstone activities in the Mojave Desert area is seen to be an effective method to protect the Goldstone radio spectrum while maintaining compatible operations for the military and Goldstone.
Gaudian, B. A.↗
Optical data transmission technology for fixed and drag-on STS payloads umbilicals. Volume 1: Executive summary
The feasibility of using optical data handling methods to transmit payload checkout and telemetry is discussed. Optical communications are superior to conventional communication systems for the following reasons: high data capacity optical channels; small and light weight optical cables; and optical signal immunity to electromagnetic interference. Task number one analyzed the ground checkout data requirements that may be expected from the payload community. Task number two selected the optical approach based on the interface requirements, the location of the interface, the amount of time required to reconfigure hardware, and the method of transporting the optical signal. Task number three surveyed and selected optical components for the two payload data link. Task number four makes a qualitative comparison of the conventional electrical communication system and the proposed optical communication system.
St.denis, R. W.↗
Brushfire arc discharge model
A one dimensional arc discharge model incorporating a brushfire-type propagation of a discharge wavefront was investigated. A set of equations, developed and their which include electrical, thermal and plasma parameters, were solutions shown to be consistent with a propagating brushfire wavefront. Voltage, current, plasma density, temperature, and resistivity profiles were obtained. Mechanical forces, magnetic and electrostatic were considered in evaluating the flashover to blowout current ratio, G', for arc discharges with the brushfire parameters developed in the model. This ratio is an important factor in determining the electromagnetic interference (EMI) impact of arc discharges on spacecraft electrical subsystems. The conclusion of the analysis is that electrostatic forces are much more important than magnetic forces. The magnitude of the G' factor obtained, 58.5 percent, is within the range of those obtained by experimental means. Improvements in the analytical model as well in the experimental approach are recommended.
Lnouye, G. T.↗
Goldstone radio spectrum signal identification, March 1980 - March 1982
The signal identification process is described. The Goldstone radio spectrum environment contains signals that are a potential source of electromagnetic interference to the Goldstone tracking receivers. The identification of these signals is accomplished by the use of signal parameters and environment parameters. Statistical data on the Goldstone radio spectrum environment from 2285 to 2305 MHz are provided.
Gaudian, B. A.↗
Direct strike lightning measurement system
A research data system developed for in-flight measurement of direct and nearby lightning-strike characteristics is described. The measurement system consists of a wide-band analog recorder which records the continuous lightning scenario and fast sample-rate digital transient recorders with augmented memory capacity for increased time resolution of specific times of interest. Electromagnetic sensors with bandwidths exceeding 100 MHz are used which respond to rates of change of the quantities being measured. Data system immunity from electromagnetic interference is accomplished by the use of a dynamotor for power isolation, shielded system enclosure and fiber-optic data links.
Thomas, M. E.↗
Parmeterization of spectra
Following reception and analog to digital conversion (A/D) conversion, atmospheric radar backscatter echoes need to be processed so as to obtain desired information about atmospheric processes and to eliminate or minimize contaminating contributions from other sources. Various signal processing techniques have been implemented at mesosphere-stratosphere-troposphere (MST) radar facilities to estimate parameters of interest from received spectra. Such estimation techniques need to be both accurate and sufficiently efficient to be within the capabilities of the particular data-processing system. The various techniques used to parameterize the spectra of received signals are reviewed herein. Noise estimation, electromagnetic interference, data smoothing, correlation, and the Doppler effect are among the specific points addressed.
Cornish, C. R.↗
Communications, tracking, and docking on the Space Station
Many of the communications, tracking, and docking functions on a large manned orbiting Space Station - one that is modular and made of metal - will have to be performed by optical systems out of necessity. This paper discusses four practical approaches to accomplishing Space Station functions using optical communications technology. It also provides the results of preliminary experiments involved in the design of particular systems. Major operational factors considered in each system design include: (a) electromagnetic interference problems, (b) data bandwidth requirements, (c) zero-gravity operations, (d) free-space operations, (e) data security, and (f) modular expansion of the Space Station structure. The technologies discussed are the following: (a) local infrared communications, (b) optical tracking and docking techniques, (c) long distance free space optical communications, and (d) local area optical networks.
Erwin, H. O.↗
Report on final recommendations for IMPS engineering-science payload
Six general categories of key scientific and engineering concerns for the interactions measurements payload for shuttle (IMPS) mission are addressed: (1) dielectric charging; (2) material property changes; (3) electromagnetic interference, plasma interactions, and plasma wake effects associated with high-voltage solar arrays and large space structures; (4) radio frequency distortion and nonlinearities due to the enhanced plasma in the shuttle ram/wake; (5) shuttle glow and contamination; and (6) plasma interactions with the space-based radar. Lesser concerns are the interactions associated with EVA; the radiation and SEU effects peculiar to the auroral/polar cap environments; and space debris. The measurements needed to address the concerns associated with the general categories are described and a list of generic investigations capable of making the required measurements, emphasizing the spectrum of measurements necessary to quantize the interactions in the auroral/polar environments are included. A suggested ground-test plan for the IMPS project, a description of proposed follow-on IMPS missions, and a detailed bibliography for each of the interactions discussed are included.
Garrett, H. B.↗
Optical Monitoring of Weld Penetration
Robotic welding controlled by reliable, relatively-noise-free optoelectronic unit. Bounding off meniscus of pool of molten metal, laser beam impinges on position-sensitive photodetector. Beam diameter adjusted for width of weld. Optical filters screen out light from arc. Made from small, low-cost components and utilizing optical fibers to conduct signals, system immune to electromagnetic interference common in industrial environments. Aimed for automatic welders, robot welders in particular and also adaptable to other types of welding, including tungsten/inert-gas, laser, and electron-beam techniques.
Maram, J.↗