SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A listing is presented of preferred electronic parts, part upgrading procedures, part derating guidelines, and part screening procedures to be used in the selection, procurement, and application of parts for Goddard Space Flight Center space systems and ground support equipment.
The use of sodium hydroxide anodization (SHA) for Ti-6Al-4V adherends is examined. The SHA surface is evaluated using SEM, X-ray photoelectron spectroscopy, and Auger electron spectroscopy. The SHA procedures of Kennedy et al. (1983) were employed in this experiment. The photomicrographs of the SHA (sandblasted) and PSHA (sandblasted and pickled) oxide surface reveal that the two surfaces differ. The PSHA is patchy and similar to a chromic acid anodization surface and the porosity of the PSHA is more uniform than the SHA surface. The compositions of the surfaces are studied. It is noted that SHA is an effective pretreatment for Ti-6Al-4V adherends.
Computational procedures are reported for treating power losses due to secondary electrons in multistage depressed collectors (MDC) for traveling wave tubes (TWT) and other O-type electron tubes. The MDC is modeled with an advanced, multidimensional computer program. Representative beams of secondary electrons are then injected at the points of impact of the primary beams. Separate programs are used to calculate representative beams of high-energy primary electron beams and of low-energy true secondaries. The recomputation of the MDC model including the true secondary beam allows determination of the secondary emission losses, and, if necessary, redesign of the MDC to improve performance. Recomputation of the MDC model including the primary beams is used to check on possible backstreaming from the MDC to the RF interaction structure of the tube. A comparison with experimentally measured values of TWT and MDC efficiencies is made.
A procedure is described for the determination of the 'apparent crossover voltage', i.e. the value of the primary (bombarding) electron energy at which an insulating sample surface changes the average sign of its charge. This apparent crossover point is characteristic of the secondary emission properties of insulating powders such as the lunar soil samples. Lunar core samples from well-defined, distinct soil layers are found to differ significantly in their secondary emission properties. This observation supports the suggestion that soil layers were deposited by an electrostatic transport process.
We develop a new procedure that combines the kinetic orbit runaway electron code (KORC) and the NIMROD extended-magnetohydrodynamic code to simulate runaway electrons (REs) in the post-disruption plateau. KORC integrates guiding-center orbits, with a barycentric-based binary search strategy providing initial guesses for the Newton–Raphson logical-to-physical coordinate inversion, ensuring reliable particle-to-mesh mapping in NIMROD, whose fields remain static for the present study. Samples are drawn in accord with experimental parallel current profiles of RE beams during the plateau phase. Deposition in NIMROD is verified through comparison with a Python-based finite-element code that ensures periodicity in the poloidal direction and continuity at the magnetic axis. Accurate representation of near-axis fields requires finer mesh resolution to prevent under- and overshoots in current density from orbit inaccuracies. Yet, at a fixed particle count, increasing mesh resolution amplifies statistical noise in the deposited fields. An orbit-averaging method accumulates partial current deposits over multiple kinetic steps and reduces the statistical noise with little added computational cost. By coupling kinetic routines from KORC directly into the NIMROD codebase, these developments lay essential groundwork for future self-consistent KORC–NIMROD coupling.
Flexseal assemblies, TVC actuators, hydraulic supply system, TVC electronic control unit, flight instrumentation system, ordnance system electronics, and hydrotest of SRM case segments are discussed, applied to typical component recertification test procedures.
The acceptance test procedure is described for the Lockheed Electronics Elevon Servoactuator Simulator to be used in the Shuttle Avionics Integration Laboratory (SAIL). The intent of this acceptance test procedure is to comply with the technical Shuttle Actuators Simulator Requirements. Acceptance tests will be performed on each Elevon Servoactuator Simulator.
An overview of the design, development, fabrication, and testing of transparent conductive coatings and conductive lattices deposited or formed on high resistivity spacecraft dielectric materials to obtain control static charge buildup on spacecraft external surfaces is presented. Fabrication techniques for the deposition of indium/tin oxide coatings and copper grid networks on Kapton and FEP Teflon films and special frit coatings for OSR and solar cell cover glasses are discussed. The techniques include sputtering, photoetching, silkscreening, and mechanical processes. A facility designed and built to simulate the electron plasma at geosynchronous altitudes is described along with test procedures. The results of material characterizations as well as electron irradiation aging effects in this facility for spacecraft polymers treated to control static charge are presented. The data presents results for electron beam energies up to 30 kV and electron current densities of 30 nA/cm squared. Parameters measured include secondary emission, surface leakage, and through the sample currents as a function of primary beam energy and voltage.
A procedure which provides automatic correction for drifts in the radiometric sensitivity of each detector channel in a direct-reading emission spectrometer is described. Such drifts are customarily controlled by the regular analyses of standards, which provide corrections for changes in the excitational, optical, and electronic components of the instrument. This standardization procedure, however, corrects for the optical and electronic drifts. It is a step that must be taken if the time, effort, and cost of processing standards is to be minimized. This method of radiometric drift correction uses a 1,000-W tungsten-halogen reference lamp to illuminate each detector through the same optical path as that traversed during sample analysis. The responses of the detector channels to this reference light are regularly compared with channel response to the same light intensity at the time of analytical calibration in order to determine and correct for drift. Except for placing the lamp in position, the procedure is fully automated and compensates for changes in spectral intensity due to variations in lamp current. A discussion of the implementation of this drift-correction system is included.
The influence of sudden increases of electron content on the accurate determination of the position of a satellite is investigated based on a spherically stratified ionospheric model. Using the total electron content information from Faraday rotation measurements, a procedure is presented whereby the corrections of satellite position due to the unpredicted electron increase can be accounted for without the need to know the spatial distribution of the additional electrons.
Development of dual speed deflection system for electron beam micropattern generator system is discussed. Factors affecting application of electron beam lithography are analyzed. Procedure for using two speed deflection system is described.
A brief outline of the chief areas where NASA is making efforts in aircraft noise research is given. This includes studies of the physical basis of aircraft noise and methods for accurately predicting it, the development of practical technologies for noise reduction, and the subjective response of people when exposed to aircraft noise. The JT8D Refan Program was to explore whether the noise reduction design concepts used effectively in modern high-bypass engines could also be applied practically and effectively as retrofittable modifications to existing older, low-bypass JT8D engines. A program has been completed on developing and demonstrating safe and acceptable flight procedures together with necessary airborne electronics to permit two-segment approaches under either VFR or IFR conditions.
The proposed dc model for bipolar junction power switching transistors is based on measurements which may be made with standard laboratory equipment. Those nonlinearities which are of importance to power electronics design are emphasized. Measurements procedures are discussed in detail. A model formulation adapted for use with a computer program is presented, and a comparison between actual and computer-generated results is made.
Experimental intensity information is combined with numerically obtained vibrational wave functions in a nonlinear least squares fitting procedure to obtain the ground electronic state electric-dipole-moment function of carbon monoxide valid in the range of nuclear oscillation (0.87 to 1.01 A) of about the V = 38th vibrational level. Mechanical anharmonicity intensity factors, H, are computed from this function for delta V + = 1, 2, 3, with or = to 38.
Experimental intensity information is combined with numerically obtained vibrational wave functions in a nonlinear least-squares fitting procedure to obtain the ground electronic state electric dipole moment function of carbon monoxide valid in the range of nuclear oscillation (0.87-1.91 A) of about the V = 38th vibrational level. Vibrational transition matrix elements are computed from this function for Delta V = 1, 2, 3 with V not more than 38.
Plans for proposed flight of the Small Expendable-tether Deployer System (SEDS) on a Delta II launch vehicle are discussed. The SEDS tether concept and mission requirements are outlined. Results are presented from calculations of the tether dynamics and computer modeling to determine tether behavior. The tether's thermal characteristics, electronics system, material, data collection procedure, payload, and orbital trace are described.
A laser flash photolysis-resonance fluorescence technique has been employed to study the kinetics of the Br((sup 2)P3/2) + NO2 association reaction as a function of temperature (259-432 K) pressure (12.5 - 700 Torr), and buffer gas identity (He, Ar, H2, N2, CO2, CF4, SF6). The reaction is found to be in the falloff regime between third and second order over the entire range of conditions investigated. At temperatures below 350 K, the association reaction is found to be irreversible on the time scale of the experiment (approximately 30 ms). At higher temperatures reversible addition is observed, allowing equilibrium constants for BrNO2 formation and dissociation to be determined. Second- and third-law analyses of the equilibrium data are in only fair agreement and lead to the following thermochemical parameters for the association reaction: Delta-H(298) = 19.6 +/- 1.7 kcal/mol, Delta-H(0) = -18.6 +/- 2.0 kcal/mol, Delta-S(298) = 29.3 +/- 4.2 cal/mol/K, Delta-H(sub f)(sub 298)(BrNO2) = 17.0 +/-1.8 kcal/mol(uncertainties are 2 sigma estimates of absolute accuracy). The value for Delta-H(0) determined in this study has been employed to calculate k(sub 0)(sup SC), the low-pressure third-order rate coefficient in the strong collision limit, by using the method of Troe; calculated values of k(sub 0)(sup SC) are inconsistent with experimental results unless Delta-H(0) is assigned a value near the lower limit derived from analysis of the high-temperature approach to equilibrium data, i.e. delta-H(0) approximately equals -16.6 kcal/mol. A potential source of systematic error in the calculation of both k(sub 0)(sup SC) and the absolute entropy of BrNO2 results from the complete lack of knowledge of the energies and degeneracies of the electronic states of BrNO3. The procedure developed by Troe and co-workers has been employed to extrapolate experimental falloff curves to the low- and high-pressure limits. Derived values for k(sub 0)(M,298K) in units of 10(exp -31) cm(exp 6)/sq molecule/s range from 2.75 for M = He to 6.54 for M = CO2; 2 sigma uncertainties are estimated to be +/- 20%. Values for k(sub 0)(N2,T) in units of 10(exp -31) cm(exp 6)/sq molecule/s are 5.73 at 259 K, 4.61 at 298 K, and 3.21 at 346 K; the observed temperature dependence for k(sub 0)(N2,T) is consistent with the theoretical temperature dependence for Beta(sub c)k(sub 0)(sup SC). Values for k(sub infinity)(T) in units of 10(exp -11) cu cm/molecule/s are 2.86 at 259 K, 3.22 at 298 K, and 3.73 at 346 K; 2 sigma uncertainties are estimated to be a factor of 2. Approximate falloff parameters in a convenient format for atmospheric modeling are also derived.
The same software controlling autonomous and crew-assisted operations for the International Space Station (ISS) is enabling commercial enterprises to integrate and automate manual operations, also known as decision logic, in real time across complex and disparate networked applications, databases, servers, and other devices, all with quantifiable business benefits. Auspice Corporation, of Framingham, Massachusetts, developed the Auspice TLX (The Logical Extension) software platform to effectively mimic the human decision-making process. Auspice TLX automates operations across extended enterprise systems, where any given infrastructure can include thousands of computers, servers, switches, and modems that are connected, and therefore, dependent upon each other. The concept behind the Auspice software spawned from a computer program originally developed in 1981 by Cambridge, Massachusetts-based Draper Laboratory for simulating tasks performed by astronauts aboard the Space Shuttle. At the time, the Space Shuttle Program was dependent upon paper-based procedures for its manned space missions, which typically averaged 2 weeks in duration. As the Shuttle Program progressed, NASA began increasing the length of manned missions in preparation for a more permanent space habitat. Acknowledging the need to relinquish paper-based procedures in favor of an electronic processing format to properly monitor and manage the complexities of these longer missions, NASA realized that Draper's task simulation software could be applied to its vision of year-round space occupancy. In 1992, Draper was awarded a NASA contract to build User Interface Language software to enable autonomous operations of a multitude of functions on Space Station Freedom (the station was redesigned in 1993 and converted into the international venture known today as the ISS)