Search NASA⌕ Search

SEARCH · Search NASA

Results for “End of Year”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

A Monte Carlo Uncertainty Analysis of Ozone Trend Predictions in a Two Dimensional Model

We use Monte Carlo analysis to estimate the uncertainty in predictions of total O3 trends between 1979 and 1995 made by the Goddard Space Flight Center (GSFC) two-dimensional (2D) model of stratospheric photochemistry and dynamics. The uncertainty is caused by gas-phase chemical reaction rates, photolysis coefficients, and heterogeneous reaction parameters which are model inputs. The uncertainty represents a lower bound to the total model uncertainty assuming the input parameter uncertainties are characterized correctly. Each of the Monte Carlo runs was initialized in 1970 and integrated for 26 model years through the end of 1995. This was repeated 419 times using input parameter sets generated by Latin Hypercube Sampling. The standard deviation (a) of the Monte Carlo ensemble of total 03 trend predictions is used to quantify the model uncertainty. The 34% difference between the model trend in globally and annually averaged total O3 using nominal inputs and atmospheric trends calculated from Nimbus 7 and Meteor 3 total ozone mapping spectrometer (TOMS) version 7 data is less than the 46% calculated 1 (sigma), model uncertainty, so there is no significant difference between the modeled and observed trends. In the northern hemisphere midlatitude spring the modeled and observed total 03 trends differ by more than 1(sigma) but less than 2(sigma), which we refer to as marginal significance. We perform a multiple linear regression analysis of the runs which suggests that only a few of the model reactions contribute significantly to the variance in the model predictions. The lack of significance in these comparisons suggests that they are of questionable use as guides for continuing model development. Large model/measurement differences which are many multiples of the input parameter uncertainty are seen in the meridional gradients of the trend and the peak-to-peak variations in the trends over an annual cycle. These discrepancies unambiguously indicate model formulation problems and provide a measure of model performance which can be used in attempts to improve such models.

Considine, D. B.↗
NASA NTRS1999

Virtual Manufacturing Techniques Designed and Applied to Manufacturing Activities in the Manufacturing Integration and Technology Branch

One of the identified goals of EM3 is to implement virtual manufacturing by the time the year 2000 has ended. To realize this goal of a true virtual manufacturing enterprise the initial development of a machinability database and the infrastructure must be completed. This will consist of the containment of the existing EM-NET problems and developing machine, tooling, and common materials databases. To integrate the virtual manufacturing enterprise with normal day to day operations the development of a parallel virtual manufacturing machinability database, virtual manufacturing database, virtual manufacturing paradigm, implementation/integration procedure, and testable verification models must be constructed. Common and virtual machinability databases will include the four distinct areas of machine tools, available tooling, common machine tool loads, and a materials database. The machine tools database will include the machine envelope, special machine attachments, tooling capacity, location within NASA-JSC or with a contractor, and availability/scheduling. The tooling database will include available standard tooling, custom in-house tooling, tool properties, and availability. The common materials database will include materials thickness ranges, strengths, types, and their availability. The virtual manufacturing databases will consist of virtual machines and virtual tooling directly related to the common and machinability databases. The items to be completed are the design and construction of the machinability databases, virtual manufacturing paradigm for NASA-JSC, implementation timeline, VNC model of one bridge mill and troubleshoot existing software and hardware problems with EN4NET. The final step of this virtual manufacturing project will be to integrate other production sites into the databases bringing JSC's EM3 into a position of becoming a clearing house for NASA's digital manufacturing needs creating a true virtual manufacturing enterprise.

Shearrow, Charles A.↗
NASA NTRS2000

NASA/JPL Plans for Fundamental Physics Research in Space

In 1998, about 100 researchers met twice to develop plans for the future in this research area. The results of these meetings have been collected in a package titled "A Roadmap for Fundamental Physics in Space". A summary of the Roadmap will be presented along with an overview of the current program. Research is being performed in Low Temperature and Condensed Matter Physics, Laser Cooling and Atomic Physics, and Gravitational and Relativistic Physics. There are currently over 50 investigators in the program of which 8 are being evaluated as potential flight experiments. The number of investigators is expected to grow further during the next selection cycle, planned to start toward the end of this year. In the near future, our investigators will be able to take advantage of long duration experimentation in Space using a suite of different carriers under development.

Isaelsson, Ulf E.↗
NASA NTRS1999

Mars Observer Propulsion and Pyrotechnics Corrective Actions Test Program Blanket Release

The Mars Observer Propulsion and Pyrotechnic Corrective Actions Test Program has been in progress at the NASA White Sands Test Facility since 1995. This program has developed capabilities to accurately characterize pyrovalve hazards and has established corrective actions that arc helping to preclude loss of spacecraft due to pyrovalve and propellant interaction. Rather than wait for conclusion of the test program, significant rest results, findings, and safety recommendations have been and will continue to be released soon after they became available to meet needs of near-term NASA and commercial space programs. This release will cover approximately three to five papers per year until program end.

Saulsberry, Regor L.↗
NASA NTRS2001

NASA's Hall Thruster Program

NASA's Hall thruster program has base research and focused development efforts in support of the Advanced Space Transportation Program, Space-Based Program, and various other programs. The objective of the base research is to gain an improved understanding of the physical processes and engineering constraints of Hall thrusters to enable development of advanced Hall thruster designs. Specific technical questions that are current priorities of the base effort are: (1) How does thruster life vary with operating point? (2) How can thruster lifetime and wear rate be most efficiently evaluated? (3) What are the practical limitations for discharge voltage as it pertains to high specific impulse operation (high discharge voltage) and high thrust operation (low discharge voltage)? (4) What are the practical limits for extending Hall thrusters to very high input powers? and (5) What can be done during thruster design to reduce cost and integration concerns? The objective of the focused development effort is to develop a 50 kW-class Hall propulsion system, with a milestone of a 50 kW engineering model thruster/system by the end of program year 2006. Specific program wear 2001 efforts, along with the corporate and academic participation, are described.

Jankovsky, Robert S.↗
NASA NTRS2003

A Distributed Simulation Software System for Multi-Spacecraft Missions

The paper will provide an overview of the web-based distributed simulation software system developed for end-to-end, multi-spacecraft mission design, analysis, and test at the NASA Goddard Space Flight Center (GSFC). This software system was developed for an internal research and development (IR&D) activity at GSFC called the Distributed Space Systems (DSS) Distributed Synthesis Environment (DSE). The long-term goal of the DSS-DSE is to integrate existing GSFC stand-alone test beds, models, and simulation systems to create a "hands on", end-to-end simulation environment for mission design, trade studies and simulations. The short-term goal of the DSE was therefore to develop the system architecture, and then to prototype the core software simulation capability based on a distributed computing approach, with demonstrations of some key capabilities by the end of Fiscal Year 2002 (FY02). To achieve the DSS-DSE IR&D objective, the team adopted a reference model and mission upon which FY02 capabilities were developed. The software was prototyped according to the reference model, and demonstrations were conducted for the reference mission to validate interfaces, concepts, etc. The reference model, illustrated in Fig. 1, included both space and ground elements, with functional capabilities such as spacecraft dynamics and control, science data collection, space-to-space and space-to-ground communications, mission operations, science operations, and data processing, archival and distribution addressed.

Burns, Richard↗
NASA NTRS2003

Formation of Brown Dwarfs LTSA 2001

The goals of the work funded by this grant are: 1) The measurement of the mass function and minimum mass of free-floating brown dwarfs down to the mass of Jupiter; 2) The measurement of the frequency of wide brown dwarf and planetary companions down to the mass of Jupiter as function of primary mass (0.02-2 Msun), age (1-10 Myr), and environment (clusters vs. dispersed regions). For the first objective, we have completed the design of guaranteed SIRTF observations of nearby star-forming regions. With the successful launch of the SIRTF mission in August of 2003, we now await the execution of these observations, which should begin in early 2004. In support of these upcoming observations, in the fall of 2002 and spring of 2003 we obtained optical spectroscopy at the MMT, the 1.5 meter telescope at Fred Lawrence Whipple Observatory, and Magellan Observatory for several hundred candidate young low-mass stars and brown dwarfs in the IC348, Taurus, and Chamaeleon star-forming regions. All of these data have been published in three papers in The Astrophysical Journal. We also recently used the MMT to obtain deep near-IR images of IC348 to accompany the SIRTF images and have time in the next month at the IRTF and Keck for spectroscopy of candidate brown dwarfs in IC348 and Taurus. We have submitted proposals for deep optical and near-IR imaging of the SIRTF fields in Chamaeleon and Ophiuchus for spring 2004 with Magellan and the AAT. Results from this research have been presented in invited talks at UU Symposium 221 (July 2003) and at the SIRTF Galactic Science Workshop (August 2003). For the second objective, we have used deep HST WFPC2 images to search for young giant planets and brown dwarfs around approx. 100 low-mass stars and brown dwarfs in the nearby cluster IC348. We have completed all data reduction and have checked these data for candidate companions. We expect to submit the paper describing these observations to The Astrophysical Journal by the end of the year. In addition, in SIRTF guaranteed time observations we plan to search for wide substellar companions (>10 sec) around the youngest nearby field stars (ages of 30-100 Myr, d<30 pc). We have submitted a proposal to use Keck adaptive optics imaging to search these same stars for close-in planets and brown dwarfs at 0.1-10 sec, which will perfectly complement our SIRTF observations.

Luhman, Kevin L.↗
NASA NTRS2003

An Internet Protocol-Based Software System for Real-Time, Closed-Loop, Multi-Spacecraft Mission Simulation Applications

The paper will provide an overview of the web-based distributed simulation software system developed for end-to-end, multi-spacecraft mission design, analysis, and test at the NASA Goddard Space Flight Center (GSFC). This software system was developed for an internal research and development (IR&D) activity at GSFC called the Distributed Space Systems (DSS) Distributed Synthesis Environment (DSE). The long-term goal of the DSS-DSE is to integrate existing GSFC stand-alone test beds, models, and simulation systems to create a "hands on", end-to-end simulation environment for mission design, trade studies and simulations. The short-term goal of the DSE was therefore to develop the system architecture, and then to prototype the core software simulation capability based on a distributed computing approach, with demonstrations of some key capabilities by the end of Fiscal Year 2002 (FY02). To achieve the DSS-DSE IR&D objective, the team adopted a reference model and mission upon which FY02 capabilities were developed. The software was prototyped according to the reference model, and demonstrations were conducted for the reference mission to validate interfaces, concepts, etc. The reference model, illustrated in Fig. 1, included both space and ground elements, with functional capabilities such as spacecraft dynamics and control, science data collection, space-to-space and space-to-ground communications, mission operations, science operations, and data processing, archival and distribution addressed.

Davis, George↗
NASA NTRS2004

A XMM Survey for Compact Objects in Supernova Remnants

The goal of the project is to identify candidate neutron stars in Galactic supernova remnants (SNRs) through their X-ray emission. With XMM we observed the SNRs and typically find 10 - 50 X-ray sources. Almost all are either background galaxies or foreground stars. Therefore we must also pursue detailed optical/infrared follow-up observations to find counterparts for these X-ray sources and classify them. At the depth of the XMM observations, practically all confusing X-ray sources should have identifiable optical/IR counterparts. We have done a preliminary analysis of the XMM data and identified likely counterparts to the X-ray sources from available surveys(DSS, 2MASS). We then obtained wide-field optical/IR data from Palomar to get counterparts for the remaining sources. This analysis is underway: while often a single bright source is in the XMM error circle and can be considered a counterpart, in a number of cases we must do more detailed studies and evaluate several fainter optical/lR sources. We hope to have the final analysis of the XMM + Palomar data done this Fall. It is possible that additional, deeper optical/IR data may be necessary. We expect to publish our results by the end of this year.

Kulkarni, Shrinivas R.↗
NASA NTRS1999

Fractal analysis of heart rate dynamics as a predictor of mortality in patients with depressed left ventricular function after acute myocardial infarction. TRACE Investigators. TRAndolapril Cardiac Evaluation

A number of new methods have been recently developed to quantify complex heart rate (HR) dynamics based on nonlinear and fractal analysis, but their value in risk stratification has not been evaluated. This study was designed to determine whether selected new dynamic analysis methods of HR variability predict mortality in patients with depressed left ventricular (LV) function after acute myocardial infarction (AMI). Traditional time- and frequency-domain HR variability indexes along with short-term fractal-like correlation properties of RR intervals (exponent alpha) and power-law scaling (exponent beta) were studied in 159 patients with depressed LV function (ejection fraction <35%) after an AMI. By the end of 4-year follow-up, 72 patients (45%) had died and 87 (55%) were still alive. Short-term scaling exponent alpha (1.07 +/- 0.26 vs 0.90 +/- 0.26, p <0.001) and power-law slope beta (-1.35 +/- 0.23 vs -1.44 +/- 0.25, p <0.05) differed between survivors and those who died, but none of the traditional HR variability measures differed between these groups. Among all analyzed variables, reduced scaling exponent alpha (<0.85) was the best univariable predictor of mortality (relative risk 3.17, 95% confidence interval 1.96 to 5.15, p <0.0001), with positive and negative predictive accuracies of 65% and 86%, respectively. In the multivariable Cox proportional hazards analysis, mortality was independently predicted by the reduced exponent alpha (p <0.001) after adjustment for several clinical variables and LV function. A short-term fractal-like scaling exponent was the most powerful HR variability index in predicting mortality in patients with depressed LV function. Reduction in fractal correlation properties implies more random short-term HR dynamics in patients with increased risk of death after AMI.

Non-NASA Center↗
NASA NTRS2004

A Three-fold Outlook of the Ultra-Efficient Engine Technology Program Office (UEET)

The Ultra-Efficient Engine Technology (UEET) Office at NASA Glenn Research Center is a part of the Aeronautics Directorate. Its vision is to develop and hand off revolutionary turbine engine propulsion technologies that will enable future generation vehicles over a wide range of flight speeds. There are seven different technology area projects of UEET. During my tenure at NASA Glenn Research Center, my assignment was to assist three different areas of UEET, simultaneously. I worked with Kathy Zona in Education Outreach, Lynn Boukalik in Knowledge Management, and Denise Busch with Financial Management. All of my tasks were related to the business side of UEET. As an intern with Education Outreach I created a word search to partner with an exhibit of a Turbine Engine developed out of the UEET office. This exhibit is a portable model that is presented to students of varying ages. The word search complies with National Standards for Education which are part of every science, engineering, and technology teachers curriculum. I also updated a Conference Planning/Workshop Excel Spreadsheet for the UEET Office. I collected and inputted facility overviews from various venues, both on and off site to determine where to hold upcoming conferences. I then documented which facilities were compliant with the Federal Emergency Management Agency's (FEMA) Hotel and Motel Fire Safety Act of 1990. The second area in which I worked was Knowledge Management. a large knowledge management system online which has extensive documentation that continually needs reviewing, updating, and archiving. Knowledge management is the ability to bring individual or team knowledge to an organizational level so that the information can be stored, shared, reviewed, archived. Livelink and a secure server are the Knowledge Management systems that UEET utilizes, Through these systems, I was able to obtain the documents needed for archiving. My assignment was to obtain intellectual property including reports, presentations, or any other documents related to the project. My next task was to document the author, date of creation, and all other properties of each document. To archive these documents I worked extensively with Microsoft Excel. different financial systems of accounting such as the SAP business accounting system. I also learned the best ways to present financial data and shadowed my mentor as she presented financial data to both UEET's project management and the Resources Analysis and Management Office (RAMO). I analyzed the June 2004 financial data of UEET and used Microsoft Excel to input the results of the data. This process made it easier to present the full cost of the project in the month of June. In addition I assisted in the End of the Year 2003 Reconciliation of Purchases of UEET.

Graham, La Quilia E.↗
NASA NTRS2005

Seismic study of the solar subsurface based on robust time-distance inferences

Progress on this project has been constrained by the unexpected death of my long time collaborator, Peter Nisenson. I worked on several other projects as a collaborator of Pete, who became seriously ill in November 2003. He continued to work as much as his condition allowed him, but his condition worsened, and Pete died on June 21 2004. I ended up a year ago with an expected substantial workload increase. I had no choice but to re-prioritize my efforts, and one other project in which Pete would have taken a substantial role, has in the past year taken an unexpected large fraction of my time.

Korzennik, Sylvain G.↗
NASA NTRS2004

The Legacy of the Low Temperature Microgravity Physics Facility

The Jet Propulsion Laboratory (JPL) has been building the Low Temperature Microgravity Physics Facility (LTMPF) as a multi-user research facility for the International Space Station. Because of the recent Presidential Exploration Initiative placed on NASA, NASA has informally told JPL to phase out the development of the LTMPF, assuming a suspension of funding at the end of fiscal year 2004. Over the last five years of development of the Facility, a tremendous legacy of both scientific and technical progress has been made, and a significant amount of flight hardware has been built. During these last few months of remaining funding, the LTMPF plans on finishing some remaining development efforts, archiving the hardware (flight and engineering models), software, and capturing the knowledge generated for possible future missions. These possible future missions could include gravitational or relativistic physics experiments (around the Earth or the Moon), charged particle physics experiments away from the Earth, possible other fundamental physics experiments in a Code U-developed free flyer orbiting the Earth, or even gravitational mapping experiments around the Moon or possibly Mars. LTMPF-developed technologies that are likely to have substantial impact on such future missions include SQUID magnetometers and thermometers, ultra-high-performance cryogenics, and high-Q superconducting resonators.

Larson, Melora↗
NASA NTRS2005

Apollo and Beyond

The orbiter medium has a pod that can be ejected from the pad or from anywhere in flight. The essence of that ejectable pod and its capacity and its systems could also be used as a lifeboat, similar to the X-38. The orbiter medium, when boosted by one booster, goes into low-Earth orbit. With two boosters and a tank, it can then rendezvous with things at the L-1 port. The L-1 port really comes from the habitable volumes that are put up. We would envision looking at a prototype during this period and actually launching one before the end of the year 2008 into the space station orbit of the International Space Station, where it could supplement what we think is a desirable thing . . . an orbiter on station. Owen Garriott, who flew on Skylab, has been pioneering the activity of long-duration orbiters that could be left at the Station and relieved on Station by another orbiter, thereby relieving the burden of having to rely on the lifeboat Soyuz and a half module, both of which have been sort of postponed now by NASA because of cost overruns. The booster large now is a fly-back booster for the Shuttle, and two of those go with the Shuttle system as it proceeds toward phase out. One large booster launches an orbiter large into low-Earth orbit for Space Shuttle transportation two into the future. With two boosters and a tank, it can then go to high orbits, which means it can intercept cycling space ships. Cycling space ships are a derivative of what we first put at the 51.6-degree inclination and then work close to the International Space Station, perhaps take the nose section of the tank and put it actually on the ISS as a larger half module than we plan to do right now.

Aldrin, Buzz↗
NASA NTRS2006

Plasmaspheric Drainage Plumes: Inner-Magnetospheric Coupling from the IMAGE/EUV Perspective

Plasmaspheric drainage plumes appear in the aftermath of periods of enhanced convection/erosion and are interpreted as a near-equatorial signature of the redistribution of thermal plasma along streamlines. Analysis of IMAGE/EUV observations from "FirstLight" through the end of calendar year 2002 reveals that for Kp greater than or equal to 3, there is an 84% probability of observing a plasmaspheric plume in EUV data. We present a statistical analysis of the geomagnetic conditions [Kp, Dst, and solar wind-induced electric field] associated with EUV plume observations. This analysis yields a peak in observational probability when Kp = 4 and Dst = -50 nT. Additionally, EUV pllume observations are associated with a solar wind-induced convection electric field at Earth [Ev, SM] characterized by bi-modal behavior with a positive mode peaked at approximately 4 m V(raised dot) m(sup -1) and a negative model that peaks at -2 mV (raised dot) m(sup -1). Analysis of the time rate of change of the plume-associated Ev, SM indicated that once the mechanism for plume formation is initiated, a slowly changing convection environment is required to allow for sufficient plume development prior to EUV detection.

Adrian, Mark L.↗
NASA NTRS1995

(abstract) Mars Global Surveyor: A Global Mapping Mission

The Mars Global Surveyor Mission will launch a single spacecraft to Mars in November 1996. After arrival at the planet in September 1997 aerobraking will be used to lower the spacecraft into a low, sun-synchronous, polar-mapping orbit over several months. Early in 1998 mapping observations will begin and continue for a Mars year (687 days). Following completion of this first Mars year of mapping the spacecraft will continue to act as a relay orbiter for an additional three Earth years. The five instruments carried involve magnetometry, surface and atmosphere imaging, atmospheric sounding, laser altimetry, gravity and thermal emission spectroscopy. In addition, the spacecraft carries a Mars relay receiver/transmitter which will operate over the entire five year orbital mission ending in January of 2003. The Mars Global Surveyor mission is intended to accomplish a portion of the scientific objectives of the Mars Observer mission which was lost in 1993 three days before entering Mars orbit. The instrumentation to be used for the magnetometers, cameras, laser altimeter, emission spectrometer and radio science are very nearly the same as those carried by Mars Observer. The spacecraft design will be new but will use spare equipment from Mars Observer and has a mass about two and one-half time smaller. All experiments will be controlled remotely from their investigators home installation. The long planned period of observation supports the mission's global and seasonal objectives.

Mars Global Surveyor Mars Observer mapping spectro↗
NASA NTRS2006

TOPEX Radar Altimeter Engineering Assessment Report Final Update-Side B Turn-On to End-of-Mission on October 9, 2005

This is the thirteenth and final report in a series of TOPEX Radar Altimeter Engineering Assessment Reports. The initial TOPEX Radar Altimeter Engineering Assessment Report, in February 1994, presented performance results for the NASA Radar Altimeter on the TOPEX/POSEIDON spacecraft, from its launch in August 1992 to February 1994. Since the time of that initial report and prior to this report, there have been eleven interim supplemental Engineering Assessment Reports, issued in March 1995, May 1996, March 1997, June 1998, August 1999, September 2000, June 2001, March 2002, May 2003, April 2004 and September 2005. The sixth supplement in September 2000 was the first assessment report that addressed Side B performance, and presented the altimeter performance from Side B turn-on until the end of calendar year 1999. This report extends the performance assessment of Side B to the final collection of data on October 9, 2005, and includes the performance assessment of Jason-1, the TOPEX follow-on mission, launched on December 7, 2001. This report provides some comparisons of Side A and Side B performance.

Lockwood, Dennis W.↗