Search NASA⌕ Search

SEARCH · Search NASA

Results for “Euler equations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

An adaptively-refined Cartesian mesh solver for the Euler equations

A method for adaptive refinement of a Cartesian mesh for the solution of the steady Euler equations is presented. The algorithm creates an initial uniform mesh and cuts the body out of that mesh. The mesh is then refined based on body curvature. Next, the solution is converged to a steady state using a linear reconstruction and Roe's approximate Riemann solver. Solution-adaptive refinement of the mesh is then applied to resolve high-gradient regions of the flow. The numerical results presented show the flexibility of this approach and the accuracy attainable by solution-based refinement.

De Zeeuw, Darren↗
NASA NTRS1992

Upwind scheme for solving the Euler equations on unstructured tetrahedral meshes

An upwind scheme is presented for solving the three-dimensional Euler equations on unstructured tetrahedral meshes. Spatial discretization is accomplished by a cell-centered finite-volume formulation using flux-difference splitting. Higher-order differences are formed by a multidimensional linear reconstruction process. The solution gradients required for the higher-order differenes are computed by a novel approach that yields highly resolved solutions in regions of smooth flow while avoiding oscillations across shocks without explicitly applying a limiter. Solutions are advanced in time by a three-stage Runge-Kutta time-stepping scheme with convergence accelerated to steady state by local time stepping and implicit residual smoothing. Transonic solutions are presented for two meshes around the ONERA M6 wing and demonstrate substantial accuracy and insensitivity to mesh size.

Frink, Neal T.↗
NASA NTRS1999

Entropy Analysis of Kinetic Flux Vector Splitting Schemes for the Compressible Euler Equations

Flux Vector Splitting (FVS) scheme is one group of approximate Riemann solvers for the compressible Euler equations. In this paper, the discretized entropy condition of the Kinetic Flux Vector Splitting (KFVS) scheme based on the gas-kinetic theory is proved. The proof of the entropy condition involves the entropy definition difference between the distinguishable and indistinguishable particles.

Shiuhong, Lui↗
NASA NTRS1983

A multigrid method for the Euler equations

A multigrid algorithm has been developed for the numerical solution of the steady two-dimensional Euler equations. Flux vector splitting and one-sided differencing are employed to define the spatial discretization. Newton's method is used to solve the nonlinear equations, and a multigrid solver is used on each linear problem. The relaxation scheme for the linear problems is symmetric Gauss-Seidel. Standard restriction and interpolation operators are employed. Local mode analysis is used to predict the convergence rate of the multigrid process on the linear problems. Computed results for transonic flows over airfoils are presented.

Jespersen, D. C.↗
NASA NTRS1985

Embedded mesh solutions of the Euler equation using a multiple-grid method

New developments make it now possible to obtain solutions to Euler equations for many problems on the basis of acceptable computing times. The possibility of an extension of these methods to more difficult flows and increasingly complex geometries can depend on obtaining suitable grid structures. Thus, an attractive approach to complex geometries involves the recasting of the problem into the framework of a multiple-grid structure. The discrete equations represented on the grid are solved as a simultaneous system. In the present investigation, this is accomplished with the aid of Ni's multiple-grid algorithm. The multiple-grid structure provided in this study represents the first step towards a completely general modular approach to the solution of the complete compressible flow problem. In the presented cases, a fine mesh resolution is obtained within the embedded mesh regions, while preserving the global coarse mesh convergence rates.

Usab, W. J., Jr.↗
NASA NTRS1988

Calculations of three-dimensional flows using the isenthalpic Euler equations with implicit flux-vector splitting

A numerical method for solving the isenthalpic form of the Euler equations is developed. The method is based on the concept of flux vector splitting in its implicit form applied to a cell centered finite volume scheme. Approximate factorization is implemented in solving the implicit part of the governing equations. Time marching to a steady state solution requires short computational times due to the relative efficiency of the basic method. Computational times are further reduced by the implementation of multigrid. Results for several basic cases are shown.

Cannizzaro, Frank E.↗
NASA NTRS1990

Higher order solution of the Euler equations on unstructured grids using quadratic reconstruction

High order accurate finite-volume schemes for solving the Euler equations of gasdynamics are developed. Central to the development of these methods are the construction of a k-exact reconstruction operator given cell-averaged quantities and the use of high order flux quadrature formulas. General polygonal control volumes (with curved boundary edges) are considered. The formulations presented make no explicit assumption as to complexity or convexity of control volumes. Numerical examples are presented for Ringleb flow to validate the methodology.

Barth, Timothy J.↗
NASA NTRS1992

A nearly-monotone genuinely multidimensional scheme for the Euler equations

Recent progress made in the development of a genuinely multidimensional finite-volume method for the Euler equations is reported. In this method, wave information is derived from a reconstruction procedure applied to the data on a triangle. The algorithm is therefore best suited to application on an unstructured grid. A flux formula which provides nearly-monotone solutions is also presented. The new method is tested on three simple 2D flows, and the results show that dominant-wave resolution is high, and that strong-wave transitions are nearly monotone.

Parpia, Ijaz H.↗
NASA NTRS1993

A multigrid method for steady Euler equations on unstructured adaptive grids

A flux-difference splitting type algorithm is formulated for the steady Euler equations on unstructured grids. The polynomial flux-difference splitting technique is used. A vertex-centered finite volume method is employed on a triangular mesh. The multigrid method is in defect-correction form. A relaxation procedure with a first order accurate inner iteration and a second-order correction performed only on the finest grid, is used. A multi-stage Jacobi relaxation method is employed as a smoother. Since the grid is unstructured a Jacobi type is chosen. The multi-staging is necessary to provide sufficient smoothing properties. The domain is discretized using a Delaunay triangular mesh generator. Three grids with more or less uniform distribution of nodes but with different resolution are generated by successive refinement of the coarsest grid. Nodes of coarser grids appear in the finer grids. The multigrid method is started on these grids. As soon as the residual drops below a threshold value, an adaptive refinement is started. The solution on the adaptively refined grid is accelerated by a multigrid procedure. The coarser multigrid grids are generated by successive coarsening through point removement. The adaption cycle is repeated a few times. Results are given for the transonic flow over a NACA-0012 airfoil.

Riemslagh, Kris↗
NASA NTRS1987

Multigrid solution of the Euler equations on unstructured and adaptive meshes

A multigrid algorithm has been developed for solving the steady-state Euler equations in two dimensions on unstructured triangular meshes. The method assumes the various coarse and fine grids of the multigrid sequence to be independent of one another, thus decoupling the grid generation procedure from the multigrid algorithm. The transfer of variables between the various meshes employs a tree-search algorithm which rapidly identifies regions of overlap between coarse and fine grid cells. Finer meshes are obtained either by regenerating new globally refined meshes, or by adaptively refining the previous coarser mesh. For both cases, the observed convergence rates are comparable to those obtained with structured multigrid Euler solvers. The adaptively generated meshes are shown to produce solutions of higher accuracy with fewer mesh points.

Mavriplis, Dimitri↗
NASA NTRS1985

Accuracy of schemes for the Euler equations with non-uniform meshes

The effect of non-uniform grids on the solution of the Euler equations is analyzed. A Runge-Kutta type scheme based on a finite volume formulation is considered. It is shown that for arbitrary grids the scheme can be inconsistent even though it is second-order accurate for uniform grids. An improvement is suggested which leads to at least first-order accuracy for general grids. Test cases are presented in both two- and three-space dimensions. Applications to finite difference and implicit algorithms are also given.

Turkel, E.↗
NASA NTRS1991

A fast upwind solver for the Euler equations on three-dimensional unstructured meshes

An upwind scheme is presented for solving the three-dimensional Euler equations on unstructured tetrahedral meshes. Spatial discretization is accomplished by a cell-centered finite-volume formulation using flux-difference splitting. Higher-order differences are formed by a novel cell reconstruction process which results in computational times per cell comparable to those of structured codes. The approach yields highly resolved solutions in regions of smooth flow while avoiding oscillations across shocks without explicit limiting. Solutions are advanced in time by a 3-stage Runge-Kutta time-stepping scheme with convergence accelerated to steady state by local time stepping and implicit residual smoothing. Solutions are presented for a range of configurations in the transonic speed regime to demonstrate code accuracy, speed, and robustness. The results include an assessment of grid sensitivity and convergence acceleration by mesh sequencing.

Frink, Neal T.↗
NASA NTRS1993

On positivity preserving finite volume schemes for compressible Euler equations

Positivity preserving property of first and higher order finite volume schemes for one and two dimensional compressible Euler equations of gas dynamics is considered. A general framework is established which shows the positivity of density and pressure whenever the underlying one dimensional first order building block based on exact or approximate Riemann solver and the reconstruction are both positivity preserving. Appropriate limitation to achieve high order positivity preserving reconstruction is described.

Perthame, Benoit↗
NASA NTRS1993

Shape optimization governed by the Euler equations using an adjoint method

A numerical approach for the treatment of optimal shape problems governed by the Euler equations is discussed. Focus is on flows with embedded shocks. A very simple problem is considered: the design of a quasi-one-dimensional Laval nozzle. A cost function and a set of Lagrange multipliers are introduced to achieve the minimum. The nature of the resulting costate equations is discussed. A theoretical difficulty that arises for cases with embedded shocks is pointed out and solved. Finally, some results are given to illustrate the effectiveness of the method.

Iollo, Angelo↗
NASA NTRS2004

A Fast Upwind Solver for the Euler Equations on Three-Dimensional Unstructured Meshes

An upwind scheme is presented for solving the three-dimensional Euler equations on unstructured tetrahedral meshes. Spatial discretization is accomplished by a cell-centered finite-volume formulation using flux-difference splitting. Higher-order differences are formed by a novel cell reconstruction process which results in computational times per cell comparable to those of structured codes. The approach yields highly resolved solutions in regions of smooth flow while avoiding oscillations across shocks without explicit limiting. Solutions are advanced in time by a 3-stage Runge-Kutta time-stepping scheme with convergence accelerated to steady state by local time stepping and implicit residual smoothing. Solutions are presented for a range of configurations in the transonic speed regime to demonstrate code accuracy, speed, and robustness. The results include an assessment of grid sensitivity and convergence acceleration by mesh sequencing.

Frink, Neal T.↗
NASA NTRS1985

Solution method for a hovering helicopter rotor using the Euler equations

A method for the calculation of the flow field of a helicopter rotor blade in hover is presented. The approach uses a finite volume solution of the three dimensional Euler equations for the blade near field. In the Euler solver the velocity field is decomposed into two parts. One is the induced velocity of the vortex wake extending below the blade, found from a free wake calculation procedure. The other part is the unknown additional velocity field of the rotor blade. This approach eliminates numerical diffusion of the rolled up wake vorticity due to truncation error and artificial viscosity. Also, the effects of the far wake are included in the limited computational domain. Solutions are presented for an isolated wing and a model helicopter rotor and compared to experiment.

Roberts, T. W.↗
NASA NTRS1993

High resolution numerical simulation of the linearized Euler equations in conservation law form

A linearized Euler solver based on a high resolution numerical scheme is presented. The approach is to linearize the flux vector as opposed to carrying through the complete linearization analysis with the dependent variable vector written as a sum of the mean and the perturbed flow. This allows the linearized equations to be maintained in conservation law form. The linearized equations are used to compute unsteady flows in turbomachinery blade rows arising due to blade vibrations. Numerical solutions are compared to theoretical results (where available) and to numerical solutions of the nonlinear Euler equations.

Sreenivas, Kidambi↗
DOE OSTI2026

High-Fidelity, Low-Dissipation/Symmetry-Preserving Numerical Scheme for Solving the Euler Equations with Unstructured, Metric-Based Mesh Adaptation

This work presents an overview of a high-fidelity compressible Euler solver that utilizes the continuous Galerkin (CG) method with added artificial numerical diffusion for stabilization to solve a variety of unsteady and steady benchmark inviscid flow problems. This work shows that discretizing the Euler equations with this CG approach and first order basis functions produces a cost-effective stencil as well as simple well-posed boundary conditions. We show through convergence testing with manufactured solutions that the reduced stencil of CG, combined with the low amount of artificial diffusion required when using the stabilization method outlined in this work, leads to stable and highly accurate results for a variety of unsteady and steady applications. When combined with the adaptive mesh refinement approach used for many of the cases in this work, our results show that the flow solver achieves even more accurate results. A variety of inviscid flow cases are presented in this work, including transient 2D cases with complex shock structures and several steady 3D airfoils sections with a constant span.

Doetsch, Kevin [ORNL] (ORCID:0000000267051705)↗