Search NASA⌕ Search

SEARCH · Search NASA

Results for “FIRST ORDER EQUATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Thermal engineering research

A theoretical investigation of gas flow inside a multilayer insulation system has been made for the case of the broadside pumping process. A set of simultaneous first-order differential equations for the temperature and pressure of the gas mixture was obtained by considering the diffusion mechanism of the gas molecules through the perforations on the insulation layers. A modified Runge-Kutta method was used for numerical experiment. The numerical stability problem was investigated. It has been shown that when the relaxation time is small compared with the time period over which the gas properties change appreciably, the set of differential equations can be replaced by a set of algebraic equations for solution. Numerical examples were given, and comparisons with experimental data were made.

Shih, C. C.↗
NASA NTRS1974

A recurrence matrix method for the analysis of longitudinal and torsional vibrations in non-uniform multibranch beams with variable boundary conditions

An approximate method for calculating the longitudinal and torsional natural frequencies and associated modal data of a beamlike, variable cross section multibranch structure is presented. The procedure described is the numerical integration of the first order differential equations that characterize the beam element in longitudinal motion and that satisfy the appropriate boundary conditions.

Davis, R. B.↗
NASA NTRS1974

Vehicle control for fuel optimization

The problem of predicting the minimum fuel trajectory for a six degree of freedom vehicle which has a motion characterized by the first order differential equations of translational and rotational dynamics is considered. The thrust direction and center of gravity of the vehicle are assumed to be fixed with respect to the vehicle. Thrust magnitude and the control moment are used as control variables and appear linearly in the equation of motion. Pontryagin's Maximum Principle is used to solve the variational problem. With this formulation, the extremal controls are bang-bang with the exception of the singular case.

Dannenberg, K. D.↗
NASA NTRS1974

Exoelectronic emission of particles of lunar surface material

A secondary electron multiplier was used to study the thermostimulated exoelectronic emission of particles of lunar surface material returned by the Soviet Luna 16 automatic station. The natural exoemission from fragments of slag, glass, anorthosite, and a metallic particle was recorded in the isochronic and isothermal thermostimulation regimes. The temperature of emission onset depended on the type of regolith fragment. For the first three particles the isothermal drop in emission is described by first-order kinetic equations. For the anorthosite fragment, exoemission at constant temperature is characterized by a symmetric curve with a maximum. These data indicate the presence of active surface defects, whose nature can be due to the prehistory of the particles.

Mints, R. I.↗
NASA NTRS1976

Design of efficient stiffened shells of revolution

A method to produce efficient piecewise uniform stiffened shells of revolution is presented. The approach uses a first order differential equation formulation for the shell prebuckling and buckling analyses and the necessary conditions for an optimum design are derived by a variational approach. A variety of local yielding and buckling constraints and the general buckling constraint are included in the design process. The local constraints are treated by means of an interior penalty function and the general buckling load is treated by means of an exterior penalty function. This allows the general buckling constraint to be included in the design process only when it is violated. The self-adjoint nature of the prebuckling and buckling formulations is used to reduce the computational effort. Results for four conical shells and one spherical shell are given.

Majumder, D. K.↗
NASA NTRS1976

A finite difference method of solving anisotropic scattering problems

A new method of solving radiative transfer problems is described including a comparison of its speed with that of the doubling method, and a discussion of its accuracy and suitability for computations involving variable optical properties. The method uses a discretization in angle to produce a coupled set of first-order differential equations which are integrated between discrete depth points to produce a set of recursion relations for symmetric and anti-symmetric angular sums of the radiation field at alternate depth points. The formulation given here includes depth-dependent anisotropic scattering, absorption, and internal sources, and allows arbitrary combinations of specular and non-Lambertian diffuse reflection at either or both boundaries. Numerical tests of the method show that it can return accurate emergent intensities even for large optical depths. The method is also shown to conserve flux to machine accuracy in conservative atmospheres

Barkstrom, B. R.↗
NASA NTRS1977

The low-latitude circulation of Mars

A steady-state two-layer atmospheric model is used in an attempt to simulate the circulation of the equatorial regions of Mars, with consideration of both thermal and mechanical orographic effects. A steady-state solution is sought with the aim of producing mean seasonal circulations upon which tides can be superimposed, and the relative importance of orographic forcing at low latitudes is evaluated. It is assumed that the atmospheres over a topographic feature and over flat terrain possess the same radiative and convective properties, simple dissipation laws are introduced which represent a surface drag effect, and six first-order difference equations are obtained and then reduced to two linear complex second-order coupled difference equations. Analysis of the response of the equinoctial basic wind field to a Gaussian orographic feature situated at the equator and zero deg longitude reveals a number of similarities and differences between the Martian and terrestrial responses. Most of the similarities are explained in terms of the dynamics of a rotating atmosphere, while the major differences are at least partially explained by the different optical properties, lower boundaries, and smaller mass of the Martian atmosphere.

Webster, P. J.↗
NASA NTRS1978

Theory of the control of structures by low authority controllers

The novel idea presented is based on the observation that if a structure is controlled by distributed systems of sensors and actuators with limited authority, i.e., if the controller is allowed to modify only moderately the natural modes and frequencies of the structure, then it should be possible to apply root perturbation techniques to predict analytically the behavior of the total system. Attention is given to the root perturbation formula first derived by Jacobi for infinitesimal perturbations which neglect the induced eigenvector perturbation, a more general form of Jacobi's formula, first-order structural equations and modal state vectors, state-space equations for damper-augmented structures, and modal damping prediction formulas.

Aubrun, J. N.↗
NASA NTRS1978

Nitrogen tetroxide scrubber data analysis

A major difficulty in the analysis of scrubber data is that of separating the physical effects, such as mass transfer, from the physico-chemical effects, such as reaction rates. This is especially true for the absorbtion of nitrogen tetroxide in the various liquids that were tested in the NASA-Kennedy Space Center Hypergolic Toxic Scrubber Program. A fruitful approach to correlating the data for outlet concentrations was to treat the overall absorbtion as a pseudo first-order absorbtion equation. This approach provided a method for normalizing the data to constant inlet concentration, constant sump liquor condition, and constant scrubbing time, and permitted evaluation of the test and fluid parameters that affected both absorbtion rate and scrubbing time. The analysis indicated that scrubber performance may be improved by optimizing liquor concentrations and liquor flowrate distributions.

Simon, E. D.↗
NASA NTRS1979

Explicit numerical formulas of improved stability and accuracy for the solution of parabolic equations

A class of explicit numerical formulas which involve next nearest neighbor as well as nearest neighbor points are explored in this paper. These formulas are formal approximations to the linear parabolic partial-differential equation of first order in time and second order in distance. It was found that some of these formulas can employ time steps as much as four times that for the conventional explicit technique without becoming unstable. Others showed improved accuracy for a given time step and spatial grid spacing. One formula achieved a steady-state solution of specified accuracy for an example problem in less than 4 percent of the total computational time required by the conventional explicit technique.

Olstad, W. B.↗
NASA NTRS1980

The dynamics and control of large flexible space structures, 3. Part A: Shape and orientation control of a platform in orbit using point actuators

The dynamics, attitude, and shape control of a large thin flexible square platform in orbit are studied. Attitude and shape control are assumed to result from actuators placed perpendicular to the main surface and one edge and their effect on the rigid body and elastic modes is modelled to first order. The equations of motion are linearized about three different nominal orientations: (1) the platform following the local vertical with its major surface perpendicular to the orbital plane; (2) the platform following the local horizontal with its major surface normal to the local vertical; and (3) the platform following the local vertical with its major surface perpendicular to the orbit normal. The stability of the uncontrolled system is investigated analytically. Once controllability is established for a set of actuator locations, control law development is based on decoupling, pole placement, and linear optimal control theory. Frequencies and elastic modal shape functions are obtained using a finite element computer algorithm, two different approximate analytical methods, and the results of the three methods compared.

Bainum, P. M.↗
NASA NTRS1980

Control of a large flexible platform in orbit

The dynamics and attitude and shape control of a large thin flexible platform in orbit are studied. Attitude and shape control is assumed to result from actuators placed perpendicular to the main surface and one edge and their effect on the rigid body and elastic modes is modelled to first order. The equations of motion are linearized about nominal orientations where the undeformed plate follows either the local vertical or local horizontal. The stability of the uncontrolled system is investigated analytically. Once controllability is established for a set of actuator locations, control law development is based on pole placement, decoupling, and linear optimal control theory.

Reddy, A. S. S. R.↗
NASA NTRS1981

The stability of pseudospectral-Chebyshev methods

The pseudospectral-Chebyshev methods are shown to be convergent in variable coefficient problems and, in some cases, hyperbolic problems. The analysis demonstrates that the rate of convergence is greater for finite difference methods or the finite element method. For a single first-order hyperbolic equation, the method is seen as remaining stable even when the coefficient changes sign, although in this case it is specified that care must be taken to have adequate spatial resolution. It is noted that this fact, combined with the fact that collocation methods are easy to apply in the nonlinear case, shows that the pseudospectral method is in general preferable to the Galerkin or Tau methods.

Gottlieb, D.↗
NASA NTRS1981

Effect of shear stress on cell cultures and other reactor problems

Anchorage dependent cell cultures in fluidized beds are tested. Feasibility calculations indicate the allowed parameters and estimate the shear stresses therein. In addition, the diffusion equation with first order reaction is solved for the spherical shell (double bubble) reactor with various constraints.

Schleier, H.↗
NASA NTRS1982

The local dispersion relation for magneto-atmospheric waves

The local dispersion relation for magneto-atmospheric waves is discussed in terms of the linearized theory of waves in a plane-stratified, inviscid, perfectly conducting atmosphere under uniform gravity. The normally used local dispersion relation is demonstrated to not be unique, depending instead on the order of derivation from the fundamental first-order perturbation equations of continuity, momentum, energy, and induction. Furthermore, it is shown that the local dispersion relation predicts that the cutoff frequency decreases with increasing magnetic field strength, while the WKB approximation method projects an increase in the cutoff frequency with increasing magnetic field strength. A new form of the local dispersion relation is developed, and consideration is given to the special case of a global dispersion relation in conditions of an isothermal atmosphere with a horizontal magnetic field.

Thomas, J. H.↗
NASA NTRS1983

State vector formulation of substructure coupling for damped systems

A generalized substructure coupling procedure in state vector form is derived for a complex system with general viscous damping. This first-order differential equation formulation is used in order to permit complex substructure modes to be employed easily. The free-interface normal (complex) modes and rigid-body modes of the substructure are defined. Complex residual attachment modes which result from static approximation of neglected higher modes are derived. The motion of each substructure is represented by a selected set of component modes. Equations of interface compatibility are employed to obtain an independent set of system equations of motion. A new method which employs incomplete complex normal modes in conjunction with the complex residual attachment modes to account for the contribution of neglected higher order modes is derived. Examples are employed to indicate how a damped structure may be analyzed by including the effect of residual attachment modes. Numerical results indicate that the new component mode synthesis method provides sytem equations of motion with reduced number of degrees of feedom leading to more accurate approximations to the system frequencies and damping factors than are obtained by pure mode truncation.

Chung, Y.-T.↗
NASA NTRS1983

Determining the alpha dynamo parameter in incompressible homogeneous magnetohydrodynamic turbulence

Alpha, an important parameter in dynamo theory, is proportional to either the kinetic, current, magnetic, or velocity helicity of the fluctuating magnetic field and fluctuating velocity field. The particular helicity to which alpha is proportional depends on the assumptions used in deriving the first order smoothed equations that describe the alpha effect. In two cases, when alpha is proportional to either the magnetic helicity or velocity helicity, alpha is determined experimentally from two point measurements of the fluctuating fields in incompressible, homogeneous turbulence having arbitrary symmetry. For the other two possibilities, alpha is determined if the turbulence is isotropic.

Matthaeus, W. H.↗