Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLOW - CHANNELS, CURVED”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Experimental Investigation of Flow Orientation Effects on Cryogenic Flow Boiling

Cryogenic flow boiling physics is of paramount importance for future cryogenic space applications employing Cryogenic Fluid Management (CFM) technologies. This experimental study investigates the two-phase flow and heat transfer performance of LN 2 flow boiling across five distinct flow orientations: vertical upflow, vertical downflow, horizontal flow, 45° inclined upflow, and 45° inclined downflow. The study employed the steady- state heating method within a circular heated tube featuring an 8.5-mm inner diameter and a 680-mm heated length. High-speed video recordings were utilized to capture two-phase flow patterns and interfacial behaviors across various flow orientations. The experiments covered a wide range of operating conditions, including mass velocities ranging from 351.80 to 1572.77 kg/m 2 s and inlet pressures from 297.14 to 1032.97 kPa, primarily with near-saturated inlet subcooling. Distinct two-phase flow patterns and regime transitions were identified for each flow orientation. Symmetrical flow patterns were evident in vertical orientations, whereas non-vertical orientations exhibited asymmetric flow stratifications, primarily influenced by the buoyancy force in a terrestrial gravity environment. Bubble dynamic parameters were quantified, and bubble collision and dispersion phenomena were visualized. Analyzing heat transfer performance based on local flow boiling curves and variations in heat transfer coefficients (HTCs), it was observed that vertical upflow demonstrated the most enhanced heat transfer performance, while vertical downflow exhibited the lowest. As mass velocity exceeded 830 kg/ m 2 s, the differences in heat transfer among orientations became less distinct, emphasizing the role of flow inertia in mitigating the influence of flow orientation. A direct comparison of microgravity HTC data from a recent study by the authors against the 1-𝘨 e HTC data indicated enhanced heat transfer performance in microgravity for flow orientation configurations in terrestrial gravity. However, this enhancement progressively diminished as the heat flux increased. Distinct HTC trends were observed as mass velocity increased for different flow orientations and gravity levels.

Cryogens↗
NASA NTRS2012

Configuration Effects on Liner Performance

The acoustic performance of a duct liner depends not only on the intrinsic properties of the liner but also on the configuration of the duct in which it is used. A series of experiments is performed in the NASA Langley Research Center Curved Duct Test Rig (at Mach 0.275) to evaluate the effect of duct configuration on the acoustic performance of single degree of freedom perforate-over-honeycomb liners. The liners form the sidewalls of the duct's test section. Variations of duct configuration include: asymmetric (liner on one side and hard wall opposite) and symmetric (liner on both sides) wall treatment; inlet and exhaust orientation, in which the sound propagates either against or with the flow; and straight and curved flow path. The effect that duct configuration has on the overall acoustic performance, particularly the shift in frequency and magnitude of peak attenuation, is quantified. The redistribution of incident mode content is shown. The liners constitute the side walls of the liner test section and the scatter of incident horizontal order 1 mode by the asymmetric treatment and order 2 mode by the symmetric treatment into order 0 mode is shown. Scatter of order 0 incident modes into higher order modes is also shown. This redistribution of mode content is significant because it indicates that the liner design can be manipulated such that energy is scattered into more highly attenuated modes, thus enhancing liner performance.

Gerhold, Carl H.↗
NASA NTRS1994

Surface property variations in Venusian fluidized ejecta blanket craters

A comprehensive study of Magellan Cycles 1 and 2 radar data from Venus reveals surface roughness and dielectric variations associated with fluidized ejecta blanket (FEB) craters that help illuminate styles of flow ejecta emplacement. This study develops new procedures of digital unit mapping and polygon-filling algorithms using Magellan synthetic aperture radar (SAR), altimetry, and radiometry data. These techniques allow the extraction of radiophysical information for FEB crater materials, nearby plains, and lava flows. Backscatter curve slopes of the FEBs studied here are consistent with surface textures that are transitional between a'a and pahoehoe-like. Average surface property values of ejecta units are relatively similar for a given crater, but are discernibly different from other craters. Individual crater ejecta reflectivity and emissivity values are relatively similar to those for the surrounding plains, which may suggest a link between plains material and ejecta dielectric properties. Increasing FEB roughness downflow are interpreted to be associated with more lava-like flows, while decreasing roughness are more similar to trends typical of gravity (pyroclastic-like or debris-like) flows. Most commonly, FEB crater flow materials exhibit transitions from proximal, lava/melt-like flow styles to distal, gravity flow-like styles. Some FEBs show more complicated behavior, however, or appear to be more dominated by dielectric differences downflow, as inferred from correlations between the data sets. Such transitions may result from changes in local topography or from overlapping of flow lobes during FEB emplacement.

Johnson, Jeffrey R.↗
NASA NTRS1990

Flow measurements in a model of the mildly curved femoral artery of man

The effects of curvature on the flow rate near the wall in the vicinity of the mildly curved femoral artery of man, and on the pressure distributions along the curved segment, were investigated using glass and tygon flow models constructed to conform to the shape of the femoral angiogram of a human subject. The test fluid was 33 percent aqueous sucrose. Steady flow observations, made using a dye flow visualization system, revealed a flow pattern like that observed in coiled pipes. A double helical type flow was found to develop, with converging streamlines in the wall vicinity from the upper and lower plane of curvature merging asymptotically along the inner curvature in a stable manner. Pressure measurements for steady flow revealed progressively larger pressure drops with distance along the entrance region of the curved segment, relative to that for a straight lumen.

Back, L. H.↗
NASA NTRS1993

Constraints on lithospheric thermal structure for the Indian Ocean from depth and heat flow data

Models for the thermal evolution of oceanic lithosphere are primarily constrained by variations in seafloor depth and heat flow with age. These models have been largely based on data from the Pacific and Atlantic Ocean basins. We construct seafloor age relations for the Indian Ocean which we combine with bathymetric, sediment isopach and heat flow data to derive curves for depth and heat flow versus age. Comparison of these curves with predictions from three thermal models shows that they are better fit by the shallower depths and higher heat flow for the GDH1 model, which is characterized by a thinner and hotter lithosphere than previous models.

Shoberg, Tom↗
DOE OSTI2026

Hydropower potential derived from streamflow extremes for Alaska, USA

Alaska is an expansive region known for its abundant natural resources, including thousands of miles of streams and rivers. These rivers represent potential opportunities for future hydropower development that could provide reliable energy supply for local communities. There is limited long-term high temporal resolution streamflow data available for the region, making data-driven estimates of potential hydropower and its variability across the state challenging. This study provides a novel data-driven approach for hydropower capacity estimation across Alaska. We use supervised machine learning to develop a relationship between the daily and peak flow duration curves in order to augment the size of our dataset from 44 sites to 67 sites. We perform a stochastic hydropower estimation across the 67 sites and identify approximately 1000 MW of total potential hydropower capacity distributed across these sites. Our study provides the first step towards more comprehensive hydropower estimation for this critical region, highlighting the need for future work integrating high-resolution spatial data, community needs, and economic constraints in estimates of potential hydropower development in Alaska.

Hydropower↗
NASA NTRS1973

Investigation of hollow cathode performance for 30-cm thrusters

A parametric investigation of 6.35 mm diameter mercury hollow cathodes was carried out in a bell jar. The parameters that were varied were the amount of initial emissive mix, insert position, emission current, cathode temperature, orifice diameter, and mercury flow rate. Flow characteristic curves and performance as a function of time were obtained for the various cathodes. The results of a 3880 hr life test of a main cathode run at 15 amps emission current with no noticeable changes in keeper and collector voltages are also presented.

Mirtich, M. J.↗
NASA NTRS1973

Investigation of hollow cathode performance for 30-cm thrusters

A parametric investigation of 6.35 mm diameter mercury hollow cathodes was carried out in a bell jar. The parameters that were varied were the amount of initial emissive mix, the insert position, the emission current, the cathode temperature, the orifice diameter, and the mercury flow rate. Flow characteristic curves and performance as a function of time were obtained for the various cathodes of interest. Also presented are the results of a 3880 hr life test of a main cathode run at 15 amps emission current with no noticeable changes in keeper and collector voltages.

Mirtich, M. J.↗
NASA NTRS1984

Multi-grid technique for the solution of incompressible Navier-Stokes equations

A computationally efficient method is proposed for obtaining fine-mesh solutions of the Navier-Stokes equations for high-Re flow, including separation. The method involves implementing a multi-grid solution procedure with suitably chosen elements, such that the resulting overall solution technique is efficient as well as robust. The robustness and efficiency of the solution technique are demonstrated by applying it to three model problems: flow in a driven cavity, downstream asymptotic flow in curved ducts of square and polar sections, and Newmann boundary-value problem in clustered curvilinear orthogonal coordinates.

Ghia, K. N.↗
NASA NTRS1988

Effect of a shallow low-viscosity zone on small-scale instabilities under the cooling oceanic plates

The effects of a low-viscosity zone in the uppermost mantle on instabilities in the cooling oceanic plates are discussed. The viscosity structure in the upper mantle is approximated by three layers consisting of a conducting lid overlying the low-viscosity zone, which in turn overlies a constant viscosity layer extending to the base of the upper mantle. It is found that this model can reproduce both the small-scale undulations and the flattening of the depth-age and heat flow-age curves.

Robinson, Elisabeth M.↗
NASA NTRS1987

Interaction of Tollmien-Schlichting waves and Goertler vortices

There are many fluid flows of practical interest where transition can be caused by competing hydrodynamic instabilities. Thus in three-dimensional boundary-layer flows over curved walls, instability might be caused by Tollmien-Schlichting waves, Goertler vortices or crossflow vortices. If a particular type of instability is suppressed by some means, there is the possibility that another one might be stimulated. Hence it is important to understand the mechanisms by which these different instabilities interact. Some properties of the interaction which can take place between Goertler vortices and Tollmien-Schlichting waves are discussed.

Hall, Phil↗
NASA NTRS1987

Forced convective heat transfer in curved diffusers

Measurements of the velocity characteristics of the flows in two curved diffusers of rectangular cross section with C and S-shaped centerlines are presented and related to measurements of wall heat transfer coefficients along the heated flat walls of the ducts. The velocity results were obtained by laser-Doppler anemometry in a water tunnel and the heat transfer results by liquid crystal thermography in a wind tunnel. The thermographic technique allowed the rapid and inexpensive measurement of wall heat transfer coefficients along flat walls of arbitrary boundary shapes with an accuracy of about 5 percent. The results show that an increase in secondary flow velocities near the heated wall causes an increase in the local wall heat transfer coefficient, and quantify the variation for maximum secondary-flow velocities in a range from 1.5 to 17 percent of the bulk flow velocity.

Rojas, J.↗
NASA NTRS1990

Transition delay and relaminarization of turbulent flow

Several techniques used for delaying transition both in air and water are overviewed, among them uniform surface heating, localized surface heating, and the application of broad-band disturbance-wave cancellation using the wave superposition principle. It is pointed out that localized heating, in air, can effectively delay transition along a flat plate and reduce viscous drag. Attention is focused on an experiment where the feasibility of relaminarizing turbulent flow over a flat plate with an upstream concave-convex curvature, in air, has been demonstrated using localized heating on the concave part of the curved surface. The flow over the curved surface investigated by thermal mapping using an infrared technique is also covered.

Maestrello, Lucio↗
NASA NTRS1979

Analysis and computation of viscous subsonic primary and secondary flows

A new approximate flow analysis, designed to enable numerical solution as an initial value problem, is developed for a wide class of viscous subsonic flows at high Reynolds number and in straight or smoothly curved three-dimensional flow geometries. The analysis is coordinate-independent and corrects an a priori known inviscid primary flow for viscous and thermal effects, secondary flows, total pressure distortion, internal flow blockage and pressure drop. Computed results include laminar solutions for three-dimensional boundary layer flow, fully viscous flow in circular arc ducts, and also flow in a curved duct shaped like a turbine blade passage.

Briley, W. R.↗
NASA NTRS1982

Stability of Goertler vortices in boundary layers

A formal analysis of Goertler-type instability is presented. The boundary-layer and disturbance equations are formulated in a general, orthogonal, curvilinear system of coordinates constructed from the inviscid flow over a curved surface. Effects of curvature on the boundary-layer flow are analyzed. The basic approximation for the disturbance equations is presented and solved numerically. Previous analyses are discussed and compared with our analysis. It is shown that the general system of coordinates developed in this analysis and the correct order-of-magnitude analysis of the disturbance velocities with two velocity scales leads to a rational foundation for future work in Goertler vortices.

Floryan, J. M.↗
NASA NTRS1987

Characteristics of a trailing flap flow with small separation

Detailed measurements of pressure and velocity characteristics are reported for the flow on and downstream of a trailing flap, whose 16 degree angle of incidence resulted in boundary layer separation, a small region of recirculating flow, and a curved downstream wake. Emphasis is placed on the region of recirculating flow and on the downstream wake. The characteristics were quantified by the use of pressure, hot-wire, and flying hot-wire probes. The flow characteristics are compared to those of a similar flow but with a larger region of recirculation reported by Thompson and Whitelaw (1985). The relative importance of the terms in the transport equations for mean momentum and turbulence energy are quantified and the implications of the results for viscous-inviscid interaction methods and turbulence modeling are discussed.

Adair, D.↗
NASA NTRS1992

Control of low-speed turbulent separated flow over a backward-facing ramp

The relative performance and flow phenomena associated with several devices for controlling turbulent separated flow were investigated at low speeds. Relative performance of the devices was examined for flow over a curved, backward-facing ramp in a wind tunnel, and the flow phenomena were examined in a water tunnel using dye-flow visualization. Surface static pressure measurements and oil-flow visualization results from the wind tunnel tests indicated that transverse grooves, longitudinal grooves, submerged vortex generators, vortex generator jets (VGJ's), Viets' fluidic flappers, elongated arches at positive angle of attack, and large-eddy breakup devices (LEBU's) at positive angle of attack placed near the baseline separation location reduce flow separation and increase pressure recovery. Spanwise cylinders reduce flow separation but decrease pressure recovery downstream. Riblets, passive porous surfaces, swept grooves, Helmholtz resonators, and arches and LEBU's with angle of attack less than or = 0 degrees had no significant effect in reducing the extent of the separation region. Wall-cooling computations indicated that separation delay on a partially-cooled ramp is nearly the same as on a fully-cooled ramp, while minimizing the frictional drag increase associated with the wall cooling process. Dry-flow visualization tests in the water tunnel indicated that wishbone vortex generators in the forward orientation shed horseshoe vortices; wishbone vortex generators oriented in the reverse direction and doublet vortex generators shed streamwise counterrotating vortices; a spanewise cylinder located near the wall and LEBU's at angle of attack = -10 degrees produced eddies or transverse vortices which rotated with the same sign as the mean vorticity in a turbulent boundary layer; and the most effective VGJ's produced streamwise co-rotating vortices. Comparative wind-tunnel test results indicated that transferring momentum from the outer region of a turbulent boundary layer through the action of embedded streamwise vortices is more effective than by transverse vortices for the separation control application studied herein.

Lin, John C.↗