Search NASA⌕ Search

SEARCH · Search NASA

Results for “FLUORINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Direct Mapping of Fluorine in Cation Disordered Rocksalt Cathodes

Cation-disordered rocksalt (DRX) oxides are promising candidates as next-generation cathodes for lithium-ion batteries. Partial fluorination of the DRX oxides enhances their cyclability. However, the lattice position, concentration, and spatial distribution of fluorine within DRX lattices remain elusive. Here, in this work, we use atom location by channeling-enhanced microanalysis, energy-dispersive X-ray spectroscopy, electron energy loss spectroscopy, and integrated differential phase contrast imaging in a scanning transmission electron microscope to gain atomic-level insights into DRX with nominal composition of Li 1.2 Mn 0.7 Ti 0.1 O 1.7 F 0.3 and Li 1.15 Ni 0.45 Ti 0.3 Mo 0.1 O 1.85 F 0.15 . We reveal that fluorine substitutes oxygen in the DRX lattices. The O/F ratio in terms of O+F = 2 is in the range from 1.92:0.08 to 1.82:0.18. Spatially, fluorine is distributed in the proximity of the Li-rich regions but distinct from lithium fluoride. Additionally, we observe that incorporation of fluorine in the DRX lattice induces a larger variation in cation–anion separation. These observations provide insight into the guided design of oxyfluoride DRX cathodes for high-performance batteries.

(S)TEM↗
DOE OSTI2012

Photoemission studies of fluorine functionalized porous graphitic carbon

Porous graphitic carbon (PGC) has unique properties desirable for liquid chromatography applications when used as a stationary phase. The polar retention effect on graphite (PREG) allows efficient separation of polar and non-polar solutes. Perfluorinated hydrocarbons however lack polarizabilty and display strong lipo- and hydrophobicity, hence common lipophilic and hydrophilic analytes have low partition coefficiency in fluorinated stationary phases. Attractive interaction between fluorinated stationary phase and fluorinated analytes results in strong retention compared to non-fluorinated analytes. In order to change the selectivities of PGC, it is necessary to develop a bonded PGC stationary phase. In this study, we have synthesized perfluorinated, PGC using hepatadecafluoro-1-iodooctane, under different temperature conditions. Surface functionalization of the raw material was studied using photoelectron spectroscopy (PES). Results indicate the existence of fluorine containing functional groups, -CF, -CF{sub 2} along with an intercalated electron donor species. Multiple oxygen functional groups were also observed, likely due to the presence of oxygen in the starting material. These oxygen species may be responsible for significant modifications to planer and tetrahedral carbon ratios.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Charge-trapping characteristics of fluorinated thin ZrO{sub 2} film for nonvolatile memory applications

The effects of fluorine treatment on the charge-trapping characteristics of thin ZrO{sub 2} film are investigated by physical and electrical characterization techniques. The formation of silicate interlayer at the ZrO{sub 2}/SiO{sub 2} interface is effectively suppressed by fluorine passivation. However, excessive fluorine diffusion into the Si substrate deteriorates the quality of the SiO{sub 2}/Si interface. Compared with the ZrO{sub 2}-based memory devices with no or excessive fluorine treatment, the one with suitable fluorine-treatment time shows higher operating speed and better retention due to less resistance of built-in electric field (formed by trapped electrons) against electron injection from the substrate and smaller trap-assisted tunneling leakage, resulting from improved ZrO{sub 2}/SiO{sub 2} and SiO{sub 2}/Si interfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2013

The abundance of fluorine in the Hyades, NGC 752, and M67

The abundance of fluorine is determined from the 2.3358 μm feature of the molecule HF for several giants in the Hyades, NGC 752, and M67 open clusters from spectra obtained with the Phoenix IR spectrometer on the 2.1 m telescope at Kitt Peak. The abundance of fluorine in cluster giants is consistent with that observed in field stars, and may indicate that stars with super-solar metallicities and young ages may be enhanced in fluorine by perhaps 0.2-0.3 dex compared to older or lower-metallicity field stars. Multiple sources probably contribute to the fluorine abundance in the Galactic disk, although the relative contributions of possible sources remain uncertain. Fluorine production in asymptotic giant branch stars, however, is unlikely to be the dominant source.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

THE ABUNDANCE OF FLUORINE IN NORMAL G AND K STARS OF THE GALACTIC THIN DISK

The abundance of fluorine is determined from the (2-0) R9 2.3358 μm feature of the molecule HF for several dozen normal G and K stars in the Galactic thin disk from spectra obtained with the Phoenix IR spectrometer on the 2.1 m telescope at Kitt Peak. The abundances are analyzed in the context of Galactic chemical evolution to explore the contributions of supernovae and asymptotic giant branch (AGB) stars to the abundance of fluorine in the thin disk. The average abundance of fluorine in the thin disk is found to be [F/Fe] = +0.23 ± 0.03, and the [F/Fe] ratio is flat or declines slowly with metallicity in the range from –0.6 < [Fe/H] < +0.3, within the limits of our estimated uncertainty. The measured abundance of fluorine and lack of variation with metallicity in Galactic thin disk stars suggest neutrino spallation in Type II supernovae contributes significantly to the Galactic fluorine abundance, although contributions from AGB stars may also be important.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2014

FLUORINE IN THE SOLAR NEIGHBORHOOD: IS IT ALL PRODUCED IN ASYMPTOTIC GIANT BRANCH STARS?

The origin of ''cosmic'' fluorine is uncertain, but there are three proposed production sites/mechanisms for the origin: asymptotic giant branch (AGB) stars, ν nucleosynthesis in Type II supernovae, and/or the winds of Wolf-Rayet stars. The relative importance of these production sites has not been established even for the solar neighborhood, leading to uncertainties in stellar evolution models of these stars as well as uncertainties in the chemical evolution models of stellar populations. We determine the fluorine and oxygen abundances in seven bright, nearby giants with well determined stellar parameters. We use the 2.3 μm vibrational-rotational HF line and explore a pure rotational HF line at 12.2 μm. The latter has never been used before for an abundance analysis. To be able to do this, we have calculated a line list for pure rotational HF lines. We find that the abundances derived from the two diagnostics agree. Our derived abundances are well reproduced by chemical evolution models including only fluorine production in AGB stars and, therefore, we draw the conclusion that this might be the main production site of fluorine in the solar neighborhood. Furthermore, we highlight the advantages of using the 12 μm HF lines to determine the possible contribution of the ν process to the fluorine budget at low metallicities where the difference between models including and excluding this process is dramatic.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Alternative Solid‐State Synthesis Route for Highly Fluorinated Disordered Rock‐Salt Cathode Materials for High‐Energy Lithium‐Ion Batteries

Abstract Fluorination has been identified as a key element for enabling the stable cycling of earth‐abundant manganese‐based disordered rock salt (DRX) cathodes. However, fluorination in the DRX bulk remains a challenge for scalable solid‐state synthesis. In this study, a tailored reaction pathway is proposed to synthesize a highly fluorinated DRX. It is demonstrated for the first time that the unconventional precursors, Li 6 MnO 4 , MnF 2 , and TiO 2 , can avoid the formation of Mn‐based intermediates (such as Li 2 (Mn,Ti)O 3, LiMnO 2 , and Mn 3 O 4 ), which, once formed, persist until the synthesis temperature reaches close to or above that required for fluorine volatility. Therefore, this method can form a highly fluorinated DRX with a composition of Li 1.23 Mn 0.40 Ti 0.37 O 2−y F y ( y = 0.29–0.34) at a low temperature (800 °C) relative to that required for conventional DRX solid‐state reactions (≥900 °C). Li 1.23 Mn 0.40 Ti 0.37 O 2−y F y ( y = 0.29–0.34) delivers a specific capacity above 300 mAh g −1 and a specific energy of 980 Wh kg −1 at 30 °C. Detailed characterization reveals that this DRX phase reversibly utilizes Mn 2+/3+ redox in the low‐voltage region and Mn 3+/4+ redox in the middle‐voltage range, whereas reversible oxygen redox is observed at high potentials.

Avvaru, Venkata Sai↗
DOE OSTI2018

Strategic fluorination of polymers and fullerenes improves photostability of organic photovoltaic blends

The photobleaching dynamics of a series of three organic photovoltaic (OPV) donor polymers and five different fullerenes are presented. The fullerenes studied include PC 60 BM and four perfluoroalkylfullerenes with relatively large electron affinities, namely C 60 (CF 3 ) 2 , C 60 (i-C 3 F 7 ) 2 , C 60 (CF 3 ) 4 , and C 60 (CF 3 ) 8 . The donor polymers were all based on cyclopentadithiophene (CPDT) and thienopyrrolodione (TPD), but the TPD side chains were designed to include alkyl, partially fluorinated alkyl, and fluorinated phenyl groups to improve miscibility of the active layer components. Exciton harvesting was probed with photoluminescence quenching measurements. Accelerated photodegradation studies of polymer:fullerene blends were then carried out under white light illumination at ~1.2 suns in air. A strong correlation was observed between the polymer donor photobleaching rate and the electron affinity of the fullerene. The most dramatic effect was observed for a blend of C 60 (CF 3 ) 8 with the donor containing fluorinated phenyl groups: the blend required 150 times the dosing of photons to bleach to 80% of its initial optical density than an analagous blend of PC60BM and non-fluorinated donor polymer. Furthermore, these results ultimately suggest that appropriate fluorination strategies applied to both the donor and acceptor can be a viable route toward a new paradigm of intrinsically photo- and phase-stable OPV active layers.

14 SOLAR ENERGY↗
DOE OSTI2022

Understanding the Fluorination of Disordered Rocksalt Cathodes through Rational Exploration of Synthesis Pathways

Here, we have designed and tested several synthesis routes targeting a highly fluorinated disordered rocksalt (DRX) cathode, Li 1.2 Mn 0.4 Ti 0.4 O 1.6 F 0.4 , with each route rationalized by thermochemical analysis. Precursor combinations were screened to raise the F chemical potential and avoid the formation of LiF, which inhibits fluorination of the targeted DRX phase. MnF 2 was used as a reactive source of F, and Li 6 MnO 4 , LiMnO 2 , and Li 2 Mn 0.33 Ti 0.66 O 3 were tested as alternative Li sources. Each synthesis procedure was monitored using a multi-modal suite of characterization techniques including X-ray diffraction, nuclear magnetic resonance, thermogravimetric analysis, and differential scanning calorimetry. From the resulting data, we advance the understanding of oxyfluoride synthesis by outlining the key factors limiting F solubility. At low temperatures, MnF 2 consistently reacts with the Li source to form LiF as an intermediate phase, thereby trapping F in strong Li-F bonds. LiF can react with Li 2 TiO 3 to form a highly lithiated and fluorinated DRX (Li 3 TiO 3 F); however, MnO is not easily incorporated into this DRX phase. Although higher temperatures typically increase solubility, the volatility of LiF above its melting point (848 °C) inhibits fluorination of the DRX phase. Based on these findings, metastable synthesis techniques are suggested for future work on DRX fluorination.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Syntheses of Colloidal F:In 2 O 3 Cubes: Fluorine-Induced Faceting and Infrared Plasmonic Response

Cube-shaped nanocrystals (NCs) of conventional metals like gold and silver generally exhibit localized surface plasmon resonance (LSPR) in the visible region with spectral modes determined by their faceted shapes. Yet, faceted NCs exhibiting LSPR response in the infrared (IR) region are relatively rare. Here, we describe the colloidal synthesis of nanoscale fluorine-doped indium oxide (F:In 2 O 3 ) cubes with LSPR response in the IR region, wherein fluorine was discovered to both direct the cubic morphology and act as an aliovalent dopant. Single-crystalline 160 nm F:In 2 O 3 cubes terminated by (100) facets and concave cubes were synthesized using a colloidal heat-up method. The presence of fluorine was found to impart higher stabilization to the (100) facets through density functional theory calculations that evaluated the energetics of F-substitution at surface oxygen sites. These calculations suggest that the cubic morphology results from surface binding of F atoms. In addition, fluorine acts as an anionic aliovalent dopant in the cubic bixbyite lattice of In 2 O 3 , introducing a high concentration of free electrons leading to LSPR. We confirmed the presence of lattice fluorine dopants in these cubes using solid-state 19 F and 115 In nuclear magnetic resonance spectroscopy. The cubes exhibit narrow, shape-dependent multimodal LSPR extinction peaks due to corner- and edge-centered modes. The spatial origin of these different contributions to the spectral response is directly visualized by electron energy loss spectroscopy in a scanning transmission electron microscope.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Biocompatible Nanocoatings of Fluorinated Polyphosphazenes through Aqueous Assembly

Nonionic fluorinated polyphosphazenes, such as poly[bis(trifluoroethoxy)phosphazene] (PTFEP), display superb biocompatibility, yet their deposition to surfaces has been limited to solution casting from organic solvents or thermal molding. Here in this paper, hydrophobic coatings of fluorinated polyphosphazenes are demonstrated through controlled deposition of ionic fluorinated polyphosphazenes (iFPs) from aqueous solutions using the layer-by-layer (LbL) technique. Specifically, the assemblies included poly[(carboxylatophenoxy)(trifluoroethoxy)phosphazenes] with varied content of fluorine atoms as iFPs (or poly[bis(carboxyphenoxy)phosphazene] (PCPP) as a control nonfluorinated polyphosphazene) and a variety of polycations. Hydrophobic interactions largely contributed to the formation of LbL films of iFPs with polycations, leading to linear growth and extremely low water uptake. Hydrophobicity-enhanced ionic pairing within iFP/BPEI assemblies gave rise to large-amplitude oscillations in surface wettability as a function of capping layer, which were the largest for the most fluorinated iFP, while control PCPP/polycation systems remained hydrophilic regardless of the film top layer. Neutron reflectometry (NR) studies indicated superior layering and persistence of such layering in salt solution for iFP/BPEI films as compared to control PCPP/polycation systems. Hydrophobicity of iFP-capped LbL coatings could be further enhanced by using a highly porous polyester surgical felt rather than planar substrates for film deposition. Importantly, iFP/polycation coatings displayed biocompatibility which was similar to or superior to that of solution-cast coatings of a clinically validated material (PTFEP), as demonstrated by the hemolysis of the whole blood and protein adsorption studies.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Crossover of thermal expansion from positive to negative by removing the excess fluorines in cubic ReO 3 -type TiZrF 7-x

Here, we report the crossover of the coefficient of thermal expansion (CTE) from positive to negative by withdrawing the excess fluorines in ReO 3 -type TiZrF 7-x (x = 0, 0.5 and 1) compounds. The average volumetric CTE between 300 K and 623 K changes from 8.07 ppm K -1 for x = 0, to 0.66 ppm K -1 for x = 0.5 and finally to -6.09 ppm K -1 for x = 1. After withdrawing the excess fluorines, the lattice expands and the edge-sharing polyhedra partially transform to corner-sharing ones, which enhances the transverse vibrations of fluorines and thus accounts for the crossover of CTE. Moreover, these compounds are narrow-gap semiconductors with the energy gap decreasing with x. NTE may also be achievable in other fluorine-excess cubic fluorides by removing the excess fluorines, which opens up a new avenue for exploring the NTE in fluorides.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Fluorination and reduction of CaCrO 3 by topochemical methods

Topochemical reactions between CaCrO 3 and polyvinylidene difluoride yield the new fluorinated phase CaCrO 2.5 F 0.5 , which was characterized by powder synchrotron X-ray diffraction, X-ray photoemission spectroscopy, and magnetic susceptibility measurements. The reaction proceeds via reduced oxide intermediates, CaCrO 2.67 and CaCrO 2.5 , in which CrO 6 octahedral and CrO 4 tetrahedral layers are stacked in a different manner along the c axis of CaCrO 3 . These two intermediate phases can be selectively synthesized by the carbothermal reduction with g-C 3 N 4. Both CaCrO 3 and CaCrO 2.5 F 0.5 adopt the same orthorhombic space group, Pbnm ; however, the fluorinated phase has decreased Cr–O–Cr bond angles as compared to the parent compound in both the ab plane and along the c -direction, which indicates an increased orthorhombic distortion due to the fluorination. Overall, while the oxygen vacancies are ordered in both intermediate phases, CaCrO 2.67 and CaCrO 2.5 , a site preference for fluorine in the oxyfluoride phase cannot be confirmed. CaCrO 3 and CaCrO 2.5 F 0.5 undergo antiferromagnetic phase transitions involving spin canting, where the fluorination causes the transition temperature to increase from 90 K to 110 K, as a result of the competition between the increased octahedral tilting and the enhancement of superexchange interactions involving Cr 3+ ions in the CaCrO 2.5 F 0.5 structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1975

Graphite fluoride lubrication - The effect of fluorine content, atmosphere, and burnishing technique

Eight different graphite fluoride compounds with fluorine to carbon ratios varying from 0.25 to 1.1 were evaluated as burnished films in order to determine the effect of fluorine content on the solid lubricant properties of graphite fluoride. For comparison, similar experiments were conducted on graphite burnished films. It was found that even a small amount of fluorine in graphite fluoride with fluorine to carbon ratio of 0.25 improved the lubricating properties of graphite. However, such factors as burnishing atmosphere, burnishing technique, test atmosphere, and specimen temperature affected the results as much as varying the fluorine to carbon ratio of the compound. Best life was found for films that were machine-burnished in moist air and tested in moist air.

Fusaro, R. L.↗
NASA NTRS1979

Electrochemical fluorination of trichloroethylene and N, N-dimethyltrifluoroacetamide

Fluorination of trichloroethylene and N, N-dimethyltrifluoroacetamide was carried out on a laboratory scale in an advanced Simons type electrochemical apparatus which could be operated automatically from ambient to 50 psi pressure. A variety of fluorine-substituted products are formed, depending upon electrolysis conditions and concentrations of reactant relative to the NaF, KF, HF electrolyte. A new reaction mechanism of electrochemical fluorination of trichloroethylene is proposed. The solvency-to-fluorine content relationship of fluorinated N, N-dimethyltrifluoroacetamide is described.

Hsu, L. C.↗
NASA NTRS1979

Electrochemical fluorination of trichloroethylene and N, N-dimethyltrifluoroacetamide

The paper presents the results of experiments concerning the fluorination of trichloroethylene and N, N-dimethyltrifluoroacetamide carried out on a laboratory scale in an advanced 'Simons' type electrochemical apparatus which could be operated automatically from ambient to 50 psi pressure. It is shown that a variety of fluorine-substituted products are formed, depending upon electrolysis conditions and concentrations of reactant relative to the NaF, KF, HF electrolyte. A new reaction mechanism of electrochemical fluorination of trichloroethylene is proposed. Finally, the solvency-to-fluorine content relationship of fluorinated N, N-dimethyltrifluoroacetamide is described.

Hsu, L.-C.↗
NASA NTRS1982

Experimental study of electrochemical fluorination of trichloroethylene

The electrochemical fluorination of trichloroethylene in anhydrous hydrogen fluoride at 0 C and at constant cell potential was investigated. A microprocessor-aided electrochemical fluorination reactor system that yields highly reproducible results was utilized. The following major two-carbon-chain products were observed: CHCl2-CCl2F, CHCl2-CClF2, CHClF-CCl2F, and CCl2F-CClF2. The first step in the reaction sequence was determined to be fluorine addition to the double bond, followed by replacement of first hydrogen and then chlorine by fluorine. Polymerization reactions yielded higher molecular weight or possible ring-type chlorofluorohydrocarbons. A comparison of the reaction products of electrochemical and chemical fluorinations of trichloroethylene is also discussed.

Polisena, C.↗
NASA NTRS1995

Storing Fluorine In Graphitelike Carbon Fibers

Fluorine stored in graphite or graphitelike carbon fibers for later release and/or use in chemical reactions. Storage in carbon fibers eliminates difficulty and risk of using high-pressure tanks and pipes to hold corrosive gas. Storage in carbon fibers makes fluorine more readily accessible than does storage as constituent of metal fluoride. Carbon fibers heated to release stored fluorine, which draws away to vessel where reacts with material to be fluorinated, possibly at temperature other than release temperature. Alternatively, material to be fluorinated mixed or otherwise placed in contact with fibers and entire mass heated to or beyond release temperature.

Hung, Ching-Cheh↗