Search NASA⌕ Search

SEARCH · Search NASA

Results for “FORMIC ACID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Reaction Mechanism of Vapor-Phase Formic Acid Decomposition over Platinum Catalysts: DFT, Reaction Kinetics Experiments, and Microkinetic Modeling

A combination of periodic density functional theory (DFT, PW91-GGA) calculations, reaction kinetics experiments, and mean-field microkinetic modeling is used to derive insights on the reaction mechanism and determine the nature of the active site under reaction conditions for the vapor-phase decomposition of formic acid (FA, HCOOH) over Pt/C catalysts. Microkinetic models formulated using DFT energetics derived on the clean Pt(100) and Pt(111) required large parameter adjustments to reproduce the experimentally measured apparent activation energies and reaction orders. Further, these models predicted high surface coverage of adsorbed carbon monoxide (CO*), inconsistent with the environment of the active site in the DFT calculations on the clean surfaces. Consequently, we reperformed DFT calculations for the entire reaction network on partially CO*-covered (4/9 monolayer, ML) Pt(111) and Pt(100). The resultant microkinetic models, with thermochemistry and kinetics explicitly dependent on CO* coverage, were able to reproduce the experimentally determined activation energies and reaction orders, in addition to being self-consistent in CO* coverage. Our results suggest that Pt(100) is likely poisoned by CO* under typical reaction conditions and does not contribute significantly to the experimentally observed reactivity. Instead, we find that Pt(111) better represents the active site for FA decomposition reaction on Pt/C catalysts. The optimized model on 4/9 ML CO*-covered Pt(111) suggests that the reaction occurs via the carboxyl (COOH*) intermediate and that the spectator CO*-assisted pathways play a significant role under reaction conditions. Lastly, this study underscores the importance of spectator species on the energetics and the mechanism of a catalytic reaction and their key role in developing a model that better addresses the nature of the active site under realistic catalytic reaction conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pd Nanoparticles Coupled to WO 2.72 Nanorods for Enhanced Electrochemical Oxidation of Formic Acid

In this work, we synthesize a new type of hybrid Pd/WO 2.72 structure with 5 nm Pd nanoparticles (NPs) anchored on 50 × 5 nm WO 2.72 nanorods. The strong Pd/WO 2.72 coupling results in the lattice expansion of Pd from 0.23 to 0.27 nm and the decrease of Pd surface electron density. As a result, the Pd/WO 2.72 shows much enhanced catalysis toward electrochemical oxidation of formic acid in 0.1 M HClO 4 ; it has a mass activity of ~1600 mA/mg Pd in a broad potential range of 0.4–0.85 V (vs RHE) and shows no obvious activity loss after a 12 h chronoamperometry test at 0.4 V. Our work demonstrates an important strategy to enhance Pd NP catalyst efficiency for energy conversion reactions.

36 MATERIALS SCIENCE↗

Tandem Nitrogen Functionalization of Porous Carbon: Toward Immobilizing Highly Active Palladium Nanoclusters for Dehydrogenation of Formic Acid

Highly dispersed palladium nanoclusters (Pd NCs) immobilized by a nitrogen (N)-functionalized porous carbon support (N-MSC-30) are synthesized by a wet chemical reduction method, wherein the N-MSC-30 prepared by a tandem low temperature heat-treatment approach proved to be a distinct support for stabilizing the Pd NCs. The prepared Pd/N-MSC-30 shows extremely high catalytic activity and recyclability for the dehydrogenation of formic acid (FA), affording the highest turnover frequency (TOF = 8414 h -1 ) at 333 K, which is much higher than that of the Pd catalyst supported on the N-MSC-30 prepared via a one-step process. This tandem heat treatment strategy provides a facile and effective synthetic methodology to immobilize ultrafine metal NPs on N-functionalized carbon materials, which have tremendous application prospects in various catalytic fields.

dehydrogenation↗

Isomer-specific, Cryogenic Ion Vibrational Spectroscopy Investigation of D2-and N2- Tagged, Protonated Formic Acid Complexes Using Two Color, IR-IR Photobleaching

Here we analyze cryogenic ion vibrational spectra of tagged protonated formic acid (PFA) with electronic structure and anharmonic vibrational calculations to establish the isomers generated by electrospray ionization (ESI) followed by buffer gas cooling to ~25 K. Two isomers are identified (the trans form (E,Z) and the cis form (E,E)) and generated in comparable abundance despite the fact that the calculated E,E structure lies 6.40 kJ mol-1 above the E,Z form. A large (~60 kJ mol-1) barrier separates them such that the E,E form can be kinetically trapped upon cooling in the ion trap. The anticooperativity between the H-bonds of the OH groups is explored by measuring the shift in the D2-bound OH fundamental when a second D2 is attached. Both isomers are observed in the N2-tagged counterparts, displaying the expected red-shifted OH bands. These results indicate that ESI generates both isomers and both must be considered when analyzing cluster spectra based on the PFA core ion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photo-Induced Hydrogen Production from Formic Acid Using a Palladium Catalyst

Liquid organic hydrogen carriers (LOHCs) are recognized as promising sustainable hydrogen (H 2 ) carriers due to their high volumetric capacity and ability to store H 2 at ambient conditions, eliminating the need for energy-intensive liquefaction or compression processes associated with H 2 or ammonia gas. One of the main current drawbacks, however, is LOHCs’ high energy demand for H 2 release. This work presents the photo-induced liberation of H 2 from formic acid (FA) as a liquid H 2 carrier, using visible light and well-established 5 wt% palladium nanoparticles supported over carbon (Pd/C). We show that low-power light-emitting diodes (LEDs) produced higher gas flow than their thermal baseline (35 °C), with 27.2 mL/min and 7.72 mL/min, respectively. Further, the rate of gas evolved with light intensity, catalyst loading, and the concentration of FA. Light-induced dehydrogenation shows similar deactivation as the known thermal mechanisms, such as the decreased Pd 2+ /Pd 0 ratio and Pd nanoparticle agglomeration. Hence, these observations suggest a photothermal mechanism, whereby the LED provides heat efficiently absorbed by the Pd/C catalyst and enhanced by Pd’s ability to absorb light, thereby driving the FA dehydrogenation reaction at ambient conditions.

08 HYDROGEN↗

Self-assembling of formic acid on the partially oxidized p (2×1) Cu(110) surface reconstruction at low coverages

Carbon dioxide (CO 2 ) reduction for synthetic fuel generation could be an integral part of a sustainable energy future. Copper (Cu) is the leading electrocatalyst for CO 2 reduction to produce multiple C-containing products such as C1 and C2 hydrocarbons and oxygenates. Understanding the mechanisms leading to their production could help optimize these pathways further. Adsorption studies of the many possible intermediates on well-characterized surfaces are crucial to elucidating these mechanisms. In this work, we explore the adsorption configurations of formic acid (HCOOH) on the surface of the partially oxidized p (2 × 1) reconstruction of the Cu(110) surface, using low-temperature scanning tunneling and atomic force microscopy, in conjunction with density functional theory modeling. We find that HCOOH adsorbs favorably on the CuO chain comprising the reconstruction. The adsorption interactions involve dative bonding of the carbonyl O to the oxidized Cu and hydrogen bonding of the OH group to the surface O or to an adjacently adsorbed HCOOH molecule. Furthermore, cooperative adsorption of the molecules occurs, forming two- to three-molecule-long oligomer chains, facilitated by intermolecular hydrogen bonding and mutual polarization of the CuO acid-base adsorption sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic Activation of Single-Atom Catalysts by Reaction Intermediates: Conversion of Formic Acid on Rh/Fe 3 O 4 (001)

The stability and activity of supported single-atom catalysts (SACs) represent critical yet opposing factors limiting our ability to explore and exploit their unique properties. Here, this study demonstrates the operation of a switchable catalyst that is activated in the presence of surface intermediates and reverts back to a stable but inactive form when the reaction is completed. We employ atomically defined Rh-Fe 3 O 4 (001) catalysts to demonstrate how structurally stable Rh, bound in surface octahedral Fe sites, gets destabilized to form highly active Rh adatoms and small clusters. Conversion of formic acid, leading initially to surface formate and hydroxyl species, is employed as a model reaction to probe the dynamics of such processes. We find that surface hydroxyl recombination to water through the Mars van Krevelen mechanism reduces Rh coordination, triggering its conversion to active Rh adatoms. Since such lattice oxygen exchange is observed in many acid-base and redox chemistries, the process can be broadly applicable to controlling the activation of the range of SACs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding Inlet Concentration Effects on the Electrocatalytic Conversion of CO 2 to Formic Acid in Gas-Fed Electrolyzers

The electrochemical CO 2 reduction reaction (CO2RR) to produce value-added products remains a developing technology for utilizing waste CO 2 streams. Most device-level CO2RR studies use pure CO 2 gas feeds; however, the effect of dilute CO 2 on the electrolyzer performance is an important consideration for large-scale electrolyzer operation, single-pass conversion, and real-world CO 2 source utilization. This work investigates the effect that the CO 2 concentration has on the performance of formic acid (HCOOH) producing tin oxide (SnO 2 ) and bismuth oxide (Bi 2 O 3 ) catalysts in an electrolyzer device setting. Surprisingly, SnO2 demonstrated an approximately 20% increase in HCOOH selectivity (Faradaic efficiency) when the CO 2 concentration decreased from 100 to 20%. In contrast, Bi 2 O 3 consistently demonstrated high selectivity toward HCOOH across the same CO 2 concentration range. The effects of the CO 2 concentration on selectivity were further investigated with half-cell experiments and in situ Raman spectroscopy, which revealed dynamic changes in the cathodic overpotential and chemical state of the catalyst that depended on the CO 2 concentration. Density functional theory calculations showed how changes in the surface oxidation state of Sn, varying from fully oxidized SnO 2 to metallic Sn(0), affect the thermodynamic barriers of the three main observed products: HCOOH, CO, and H 2 . Our results indicate that dilute CO 2 concentrations required larger cathodic overpotentials to sustain a fixed current density, which, in turn, pushed the Sn-based catalyst toward a more reduced surface that was favorable to HCOOH formation. On the other hand, the Bi-based catalyst remained in a metallic state at CO2RR-relevant potentials and demonstrated a consistent product selectivity regardless of CO 2 concentration. These findings highlight how varying the CO 2 inlet gas concentrations affects the chemical state of catalysts and the resulting performance metrics.

42 ENGINEERING↗

Carbon Nanospheres Loaded with Ir Single Atoms: Enhancing the Activity toward Formic Acid Oxidation by Increasing the Porosity

Theoretically, single-atom catalysts (SACs) offer 100 % atom utilization, making them strong candidates to replace expensive nanoparticles for catalysis. However, the structural supports used to anchor the SACs dramatically reduce the utilization efficiency of atoms ( i. e ., the percent of atoms actually accessible by reactants) by either encapsulating the SACs completely or creating severe diffusion limitation. Either of which leads to an overall low atom utilization and thus poor electrocatalytic activity similar to that of nanoparticles. In addressing this issue, we systematically investigated how the porous structure of carbon nanospheres affects the activity of Ir-SACs toward formic acid oxidation (FAO). Specifically, we utilized a kinetically-controlled growth strategy to produce uniform carbon nanospheres featuring yolk-shell, mesoporous, and hollow structures with Ir-SACs loaded throughout the structure. At a high specific surface area of 441 m 2 g -1 and exposed metal content of 1.82 wt %, the Ir-SACs based on mesoporous carbon nanospheres showed a remarkable FAO peak current density of 30.6 mA cm -2 , which was 283 and 46 times greater when benchmarked against the catalysts based on solid carbon nanospheres and 20 wt % Ir/C, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structurally ordered Pt–Zn/C series nanoparticles as efficient anode catalysts for formic acid electrooxidation

Controlling the size, composition, and structure of bimetallic nanoparticles is of particular interest in the field of electrocatalysts for fuel cells. In the present work, structurally ordered nanoparticles with intermetallic phases of Pt 3 Zn and PtZn have been successfully synthesized via an impregnation reduction method, followed by post heat-treatment. The Pt 3 Zn and PtZn ordered intermetallic nanoparticles are well dispersed on a carbon support with ultrasmall mean particle sizes of ~5 nm and ~3 nm in diameter, respectively, which are credited to the evaporation of the zinc element at high temperature. These catalysts are less susceptible to CO poisoning relative to Pt/C and exhibited enhanced catalytic activity and stability toward formic acid electrooxidation. The mass activities of the as-prepared catalysts were approximately 2 to 3 times that of commercial Pt at 0.5 V (vs. RHE). As a result, this facile synthetic strategy is scalable for mass production of catalytic materials.

36 MATERIALS SCIENCE↗

Selective bond-breaking in formic acid by dissociative electron attachment

We report the results of a joint experimental and theoretical study of dissociative electron attachment to formic acid (HCOOH) in the 6–9 eV region, where H- fragment ions are a dominant product. Breaking of the C–H and O–H bonds is distinguished experimentally by deuteration of either site. We show that in this region H- ions can be produced by formation of two or possibly three Feshbach resonance (doubly-excited anion) states, one of which leads to either C–H or O–H bond scission, while the other can only produce formyloxyl radicals by O–H bond scission. Comparison of experimental and theoretical angular distributions of the anion fragment allows the elucidation of state specific pathways to dissociation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reactivity of Silanes with ( tBu PONOP)Ruthenium Dichloride: Facile Synthesis of Chloro-Silyl Ruthenium Compounds and Formic Acid Decomposition

The coordination of tBu PONOP ( tBu PONOP=2,6-bis(ditert-butylphosphinito)pyridine) to different ruthenium starting materials, to generate ( tBu PONOP)RuCl 2 , was investigated in this paper. The resultant ( tBu PONOP)RuCl 2 reactivity with three different silanes was then investigated and contrasted dramatically with the reactivity of ( iPr PONOP)RuCl 2 (DMSO) ( iPr PONOP=2,6-bis(diisopropylphosphinito)pyridine) with the same silanes. The 16-electron species ( tBu PONOP)Ru(H)Cl was produced from the reaction of triethylsilane with ( tBu PONOP)RuCl 2 . Reactions of ( tBu PONOP)RuCl 2 with both phenylsilane or diphenylsilane afforded the 16-electron hydrido-silyl species ( tBu PONOP)Ru(H)(PhSiCl 2 ) and ( tBu PONOP)Ru(H)(Ph 2 SiCl), respectively. Reactions of all three of these complexes with silver triflate afforded the simple salt metathesis products of ( tBu PONOP)Ru(H)(OTf), ( tBu PONOP)Ru(H)(PhSiCl(OTf)), and ( tBu PONOP)Ru(H)(Ph 2 Si(OTf)). Formic acid dehydrogenation was performed in the presence of triethylamine (TEA), and each species proved competent for gas-pressure generation of CO 2 and H 2 . Finally, the hydride species ( tBu PONOP)Ru(H)Cl, ( tBu PONOP)Ru(H)(OTf), and ( tBu PONOP)Ru(H)(PhSiCl 2 ) exhibited faster catalytic activity than the other compounds tested.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microfluidic, One-Batch Synthesis of Pd Nanocrystals on N-Doped Carbon in Surfactant-Free Deep Eutectic Solvents for Formic Acid Electrochemical Oxidation

One of the grand challenges that impedes practical applications of nanomaterials is the lack of robust manufacturing methods that are scalable, cheap, and environmentally friendly. In this work, we address this challenge by developing a microfluidic approach that produces surfactant-free Pd nanocrystals (NCs) uniformly loaded on N-doped porous carbon in a one-batch process. The deep eutectic solvent (DES) prepared from choline chloride and ethylene glycol was employed as a novel synthesis solvent, and its extended hydrogen networks and abundant ionic species effectively stabilize Pd facets and confine nanocrystal sizes without using surfactants. The microreactors provide faster heat exchange and more uniform mass transport, which in combination with DES produced Pd NCs with better-defined shape and predominately exposed Pd (100) facet. Furthermore, we describe that the N-doped functional groups in porous carbon direct dense and uniform heterogeneous growth of Pd NCs in a one-batch process, thereby eliminating a separate catalyst deposition step that is often involved in conventional synthesis. The Pd NCs in the one-batch-produced Pd/C catalysts exhibited a size distribution of similar to ~13 ± 3.5 nm and a high ESCA of 46.0 m 2 /g and delivered 362 mA/mg for formic acid electrochemical oxidation with improved stability, demonstrating the unique potentials of microfluidic reactors and DES for the controllable and scalable synthesis of electrocatalyst materials for practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Choline chloride-formic acid mixture as a medium for the reduction of pertechnetates – electrochemical and spectroscopic studies

In this work, physicochemical properties of the choline chloride (ChCl) and formic acid (FA) mixture (1:2 molar ratio) have been studied over a broad range of temperatures (-140°C – 60 °C). Differential scanning calorimetry has shown that the examined system remains in liquid state at very low temperatures - a glass transition is observed in the range of -125 °C to - 90 °C. The kinematic viscosity, ionic conductivity and the width of the electrochemical window determined for this system revealed its beneficial electrochemical properties. This indicates suitability of ChCl:FA electrolytes in electrochemical measurements. In this non-aqueous electrolyte, the electrochemical reduction of Tc(VII) ions has been studied for the first time. Cyclic voltammetry and chronopotentiometry experiments revealed that the electroreduction of the pertechnetates is a multi-path process which leads to formation of a Tc(IV) ionic form. X-ray absorption spectroscopy of the latter revealed its structure as a TcCl 6 2- complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Species differences in methanol and formic acid pharmacokinetics in mice, rabbits and primates

Methanol (MeOH) is metabolized primarily by alcohol dehydrogenase in humans, but by catalase in rodents, with species variations in the pharmacokinetics of its formic acid (FA) metabolite. The teratogenic potential of MeOH in humans is unknown, and its teratogenicity in rodents may not accurately reflect human developmental risk due to differential species metabolism, as for some other teratogens. To determine if human MeOH metabolism might be better reflected in rabbits than rodents, the plasma pharmacokinetics of MeOH and FA were compared in male CD-1 mice, New Zealand white rabbits and cynomolgus monkeys over time (24, 48 and 6 h, respectively) following a single intraperitoneal injection of 0.5 or 2 g/kg MeOH or its saline vehicle. Following the high dose, MeOH exhibited saturated elimination kinetics in all 3 species, with similar peak concentrations and a 2.5-fold higher clearance in mice than rabbits. FA accumulation within 6 h in primates was 5-fold and 43-fold higher than in rabbits and mice respectively, with accumulation being 10-fold higher in rabbits than mice. Over 48 h, FA accumulation was nearly 5-fold higher in rabbits than mice. Low-dose MeOH in mice and rabbits resulted in similarly saturated MeOH elimination in both species, but with approximately 2-fold higher clearance rates in mice. FA accumulation was 3.8-fold higher in rabbits than mice. Rabbits more closely than mice reflected primates for in vivo MeOH metabolism, and particularly FA accumulation, suggesting that developmental studies in rabbits may be useful for assessing potential human teratological risk.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Immobilization of highly active bimetallic PdAu nanoparticles onto nanocarbons for dehydrogenation of formic acid

Highly active bimetallic PdAu nanoparticles (NPs) supported on commercial nanocarbons have been prepared through a simple Larginine- mediated synthetic approach. The as-synthesized catalysts have been used for the dehydrogenation of formic acid (FA). Remarkably, the resultant Pd1Au1 NPs immobilized onto MSC-30 carbon achieved a turnover frequency (TOF) value of 8355 h1 at 60 C in aqueous FA solution without addition of sodium formate, much higher than the results of heterogeneous catalysts reported thus far. The simple small-molecule-mediated synthetic methodology developed herein opens a new path for the practical and large-scale development of high-performance catalysts for a wide range of applications.

Hong, Wei↗

Direction to practical production of hydrogen by formic acid dehydrogenation with Cp*Ir complexes bearing imidazoline ligands

In a Cp*Ir complex with a bidentate pyridyl-imidazoline ligand achieved the evolution of 1.02 m 3 of H 2 /CO 2 gases by formic acid dehydrogenation without any additives or adjustments in the solution system. Furthermore, the pyridyl-imidazoline moieties provided the optimum pH to be 1.7, resulting in high activity and stability even at very acidic conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗