Search NASA⌕ Search

SEARCH · Search NASA

Results for “FRED”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

An interactive approach to surface-fitting complex geometries for flowfield applications

Numerical flowfield methods require a geometry subprogram which can calculate body coordinates, slopes, and radii of curvature for typical aircraft and spacecraft configurations. The objective of this paper is to develop a new surface-fitting technique which addresses two major problems with existing geometry packages: computer storage requirements and the time required of the user for the initial set-up of the geometry model. In the present method, coordinates of cross sections are fit in a least-squares sense using segments of general conic sections. After fitting each cross section, the next step is to blend the cross-sectional curve-fits in the longitudinal direction using general conics to fit specific meridional half-planes. For the initial setup of the geometry model, an interactive, completely menu-driven computer code has been developed to allow the user to make modifications to the initial fit for a given cross section or meridional cut. Graphic displays are provided to assist the user in the visualization of the effect of each modification. The completed model may be viewed from any angle using the code's three-dimensional graphics package. Geometry results for the modeling of the Space Shuttle and a proposed Aeroassist Flight Experiment (AFE) geometry are presented, in addition to calculated heat-transfer rates based on these models.

Dejarnette, Fred R.↗

Thermal test results of the two-phase thermal bus technology demonstration loop

A two-phase heat transport system, the Thermal Bus Technology Demonstrator, has been built and tested for NASA Johnson Space Center for application on Space Station. The loop is a separated two-phase system that uses evaporator flow control valves and liquid condenser flooding to achieve temperature control. Both ambient and thermal vacuum tests have been completed in NASA's Chamber A, initially using Freon-11 and then ammonia as the working fluid. Overall, the tests were quite successful, with the bus achieving all major test objectives, including operation at 19.5 kW and set points at 35 F (1.7 C), 70 F (21.1 C) and 104 F (40.0 C), load sharing, asymmetrical heating and isothermality around the loop. Low plate to vapor temperature drops were obtained for the monogroove cold plate using ammonia and are indicative of the high evaporative film coefficients obtainable with this design.

Edelstein, Fred↗

Data storage systems technology for the Space Station era

The paper presents the results of an internal NASA study to determine if economically feasible data storage solutions are likely to be available to support the ground data transport segment of the Space Station mission. An internal NASA effort to prototype a portion of the required ground data processing system is outlined. It is concluded that the requirements for all ground data storage functions can be met with commercial disk and tape drives assuming conservative technology improvements and that, to meet Space Station data rates with commercial technology, the data will have to be distributed over multiple devices operating in parallel and in a sustained maximum throughput mode.

Dalton, John↗

Search for X-rays from the region of the Aries-Perseus flasher

The region containing the Perseus flasher was observed for 5.4 h with the Exosat observatory. Upper limits to a point source with a steady X-ray flux were 2 x 10 to the -12th erg/sq cm s and 6 x 10 to the 12th erg/sq cm s. Upper limits to X-ray flashes of about 1 s duration were 4 x 10 to the 9th erg/sq cm s and 7 x 10 to the -10th erg/sq cm s. In view of the growing number of negative optical observations, it appears that either the optical flashes do not have a celestial origin, or that the flasher has a transient character and turns off for extended periods of time.

Lewin, Walter H. G.↗

Automated maneuvering decisions for air-to-air combat

A game-matrix approach is used to generate intelligent maneuvering decisions for nap-of-the-earth one-on-one helicopter air combat over hilly terrain. Decisions are made in real time using the AUTOMAN program by comparing scores based upon the predicted orientation, range, velocity, and terrain clearance for various maneuver combinations of both aircraft. The program has been demonstrated at the NASA Ames Vertical Motion Simulator, providing manned helicopter simulations. Sample trajectories from a stand-alone version of the program designed for nonpiloted simulations demonstrate that the present automated maneuvering logic generates some of the tactics employed by experienced pilots in flight tests. The program also has application to fixed-wing aircraft simulations.

Austin, Fred↗

Surface temperature and albedo relationships in Senegal derived from NOAA-7 satellite data

The interaction between surface albedo and local climate in Senegal, Africa, is examined using NOAA AVHRR data collected from September 1981-October 1982. The temporal variations of albedo and surface temperature are calculated and examined. It is observed that the albedo and ground temperature are largest in the winter and spring (dry season) and smallest in the late summer and fall (wet season). From the wet to the dry seasons the albedo varied by about 3 percentage points and the ground temperature by about 13 K. A positive correlation between albedo and ground temperatures is detected; this indicates that the albedo does not control the ground temperature. Other factors that can influence ground temperatures are atmospheric turbulence, soil moisture, thermal inertia, and ground emissivity, which are all affected by the presence or absence of vegetation.

Vukovich, Fred M.↗

JPL multipolarization workstation - Hardware, software and examples of data analysis

A low-cost stand-alone interactive image processing workstation has been developed for operations on multipolarization JPL aircraft SAR data, as well as data from future spaceborne imaging radars. A recently developed data compression technique is used to reduce the data volume to 10 Mbytes, for a typical data set, so that interactive analysis may be accomplished in a timely and efficient manner on a supermicrocomputer. In addition to presenting a hardware description of the work station, attention is given to the software that has been developed. Three illustrative examples of data analysis are presented.

Burnette, Fred↗

Shock effects and argon loss in samples of the Leedey L6 chondrite experimentally shocked to 29-70 GPa pressures

The recovery of polished 600-micron-thick 7-mm-diameter disk samples and powder samples of the Leedey L6 chondrite from 29-70-GPa experimental shocks is investigated experimentally under vacuum conditions, with a focus on the possible direct shock loss of radiogenic Ar. The results of petrographic examination of the shocked samples and Ar isotope measurements are presented in tables, graphs, and micrographs and characterized in detail. The principal damage mechanisms are identified as mechanical disaggregation and increasing cataclasis, with little melting. The degassing of radiogenic Ar is found to be relatively modest and to increase with shock pressure and sample porosity; it is attributed to a combination of mechanical grain disruption and feldspar melting. It is inferred that Ar loss in naturally shocked materials (especially those showing few signs of melting) probably occurs during extended exposure to high temperatures during impact formation.

Bogard, Donald↗

Optical Rotary Joint For Data Transfer

Proposed joint increases bandwidth and reduces errors. Scheme for transferring digital data across rotary joint uses light instead of electrical signals. Optical joint offers greater bandwidth and operates at considerably lower error rate. Concept applied to transfer of highspeed data to rotating antennas or across joints of robots and manipulators in automated manufacturing.

Becker, Fred J.↗

Spectrum/Orbit-Utilization Program

Interferences among geostationary satellites determine allocations. Spectrum/Orbit Utilization Program (SOUP) is analytical computer program for determining mutual interferences among geostationary-satellite communication systems operating in given scenario. Major computed outputs are carrier-to-interference ratios at receivers at specified stations on Earth. Information enables determination of acceptability of planned communication systems. Written in FORTRAN.

Miller, Edward F.↗

Tool Extracts Smooth, Fragile Tubes

When laterally compressible tube too slippery to pull, simple tool does job. Consists of three linked sections of steel tube with sticky rubber on inside and handles on outside. Hinged sections encircle tube to be pulled. User pulls on handles to extract tube.

Sanders, Fred G.↗

Spark Igniters Fit In Correct Locations Only

Pins create interference if incorrect assembly is attempted. When two different types of spark igniters must be used on same engine simple expedient ensures that each igniter is inserted in correct hole. Damage to engine and consequent failure are thereby avoided. Pins in base of spark igniter allow part to be inserted in any type hole.

Wendland, Fred J.↗

Detecting Space Dust Particles

Technique records times specific craters formed in targets exposed in space and permits determination of direction in which impacting particles traveled at times of impacts. MOS capacitor is short-circuited by impact of particle striking at high speed. After recovery of targets from space, compositions of impacting particles established through post-flight laboratory analyses of residual materials in craters. On earth technique has industrial and military uses in detection of fragments driven by explosions. Studies of orbital dynamics of particles produced by solid-propellant rocket-motor firings in space made using technique.

Kinard, William H.↗

Easy-To-Use Connector-Assembly Tool

Tool compensates for user's loss of dexterity under awkward conditions. Has jaws that swivel over 180 degree so angle adjusts with respect to handles. Oriented and held in position most comfortable and effective for user in given situation. Jaws lined with rubber pads so they conform to irregularly shaped parts and grips firmly but gently. Once tool engages part, it locks on it so user can release handles without losing part. Ratchet mechanism in tool allows user to work handles back and forth in confined space to connect or disconnect part. Quickly positioned, locked, and released. Gives user feel of its grip on part. Frees grasping muscles from work during part of task, giving user greater freedom to move hand. Operates with only one hand, leaving user's other hand free to manipulate wiring or other parts. Also adapts to handling and positioning extremely-hot or extremely-cold fluid lines, contaminated objects, abrasive or sharp objects, fragile items, and soft objects.

Redmon, John W., Jr.↗

Identifiability Of Systems With Modeling Errors

Advances in theory of modeling errors reported. Recent paper on errors in mathematical models of deterministic linear or weakly nonlinear systems. Extends theoretical work described in NPO-16661 and NPO-16785. Presents concrete way of accounting for difference in structure between mathematical model and physical process or system that it represents.

Hadaegh, Yadolah "fred"↗

Spatial characterization of acid rain stress in Canadian Shield Lakes

An analysis was performed to interpret the spatial aspects of lake acidification. Three types of relationships were investigated based upon the August to May seasonal scene pairing. In the first type of analysis ANOVA was used to examine the mean Thematic Mapper band one count by ecophysical strata. The primary difference in the two ecophysical strata is the soil type and depth over the underlying bedrock. Examination of the August to May difference values for TM band one produced similar results. Group A and B strata were the same as above. The third type of analysis examined the relationship between values of the August to May difference from polygons which have similar ecophysical properties with the exception of sulfate deposition. For this case lakes were selected from units with sandy soils over granitic rock types and the sulfate deposition was 1.5 or 2.5 g/sq m/yr.

Tanis, Fred J.↗

Spatial characterization of acid rain stress in Canadian Shield Lakes

The acidification of lake waters from airborne pollution is of continental proportions both in North America and Europe. A major concern of the acid rain problem is the cumulative ecosystem damage to lakes and forest. The number of lakes affected in northeastern U.S. and on the Canadian Shield is though to be enormous. How seasonal changes in lake transparency are related to annual acidic load was examined. The relationship between variations in lake acidification and ecophysical units was also examined. The utility of Thematic Mapper based observations to measure seasonal changes in the optical transparency in acid lakes was investigated. The potential for this optical response is related to a number of local ecophysical factors with bedrock geology being, perhaps, the most important. Other factors include sulfate deposition, vegetative cover, and terrain drainage/relief. The area of southern Ontario contains a wide variety of geologies from the most acid rain sensitive granite quartzite types to the least sensitive limestone dolomite sediments. Annual sulfate deposition ranges from 1.0 to 4.0 grams/sq m.

Tanis, Fred J.↗