Search NASA⌕ Search

SEARCH · Search NASA

Results for “FREE MOLECULAR FLOW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

On the Equivalence of Gas and Liquid Leak Flow Rates for Application to Propulsion and Propellant Transfer Systems

The equivalence of leak rates for gas flow and liquid flow through an arbitrary small leak size in pressurized systems has been investigated theoretically and experimentally. Measurements were taken for gaseous helium (GHe) rates and water flow issuing from the same leak configuration. The predictions for the correlation of GHe leak rates to water leak rates have been satisfactorily compared with present test data and those of other investigators over a wide range leak flow rates (many orders of magnitude) corresponding to a wide range of leak sizes (0.1 m to 0.1 mm). The results show that at extremely small leak sizes (sub-micron range), the effects of Knudsen number in the free molecular regime (rarefied gases) become important. By a proper scaling procedure, the measured flow rate for water could be applied to equivalent propellant leaks in flight operations. In the present tests the micro-channel range of the leak size is satisfactorily simulated by repeatable precision set needle position valve. Test results show that in general the theoretical model predicts the data reasonably well for GHe flow rates in the range of 0.001 to 1 sccs. Outside this range of GHe flow rates some adjustments (improvements) to the analytical model are required along with further testing.

Max Kandula↗
NASA NTRS1977

Gaseous sodium sulfate formation in flames and flowing gas environments

Formation of Na2SO4(g) in flames and hot flowing gas systems was studied by high pressure, free-jet expansion, modulated molecular beam mass spectrometric sampling. Fuel-lean CH4-O2 flames doped with SO2, H2O and NaCl yielded the gaseous Na2SO4 molecule in residence times of less than one millisecond. Intermediate species NaSO2(g) and NaSO3(g) were also observed and measured. Composition profiles were obtained for all reaction products. Nonflame flowing gas experiments showed that Na2SO4 and NaSO3 gaseous molecules were formed at 1140 C in mixtures of O2, H2O(g), SO2 and NaCl(g). Experimental results are compared with calculated equilibrium thermodynamic predictions.

Stearns, C. A.↗
NASA NTRS1977

Gaseous sodium sulfate formation in flames and flowing gas environments

Formation of Na2SO4(g) in flames and hot flowing gas systems was studied by high pressure, free-jet expansion, modulated molecular beam mass spectrometric sampling. Fuel-lean CH4-O2 flames doped with SO2, H2O and NaCl yielded the gaseous Na2SO4 molecule in residence times of less than one millisecond. Intermediate species NaSO2(g) and NaSO3(g) were also observed and measured. Composition profiles were obtained for all reaction products. Non-flame flowing gas experiments showed that Na2SO4 and NaSO3 gaseous molecules were formed at 1140 C in mixtures of O2, H2O(g), SO2 and and NaCl(g). Experimental results are compared with calculated equilibrium thermodynamic predictions.

Stearns, C. A.↗
NASA NTRS1987

Molecular flow velocity using Doppler shifted Raman spectroscopy

Measurements of molecular flow velocity, static pressure, and translational temperature in the free-stream of a supersonic wind tunnel and behind the shock of a simple model are reviewed. Based on the free-stream demonstration using inverse Raman spectroscopy, an experiment is outlined to investigate the lee-side flow field above a swept delta wing and simulated spectra expected for the leading-edge vortex are included. The extension of the technique to hypersonic wind tunnels is also explored through the use of simulated spectra.

Exton, Reginald J.↗
NASA NTRS1989

Hypersonic rarefied flow about plates at incidence

The direct-simulation Monte Carlo method has been used in a numerical study of the transitional flow about two plate configurations at incidence; one of the two plates, both of which are 12 m long, has zero thickness, while the other has a thickness of 0.5 m and a node radius of 0.5 m. The flow conditions simulated are those of the Space Shuttle Orbiter during 7.5 km/hr reentry, in the 200-100 km altitude range encompassing most of the transitional flow for this vehicle. The results obtained clearly demonstrate that transitional effects are significant even at those altitudes where the flow about a typical space vehicle has been considered free-molecular.

Dogra, Virendra K.↗
DOE OSTI2025

Ab initio investigation of a hypersonic double cone experiment

This article presents a direct molecular simulation (DMS) of a reactive Mach 8.2 oxygen flow over a double cone geometry. The free stream conditions and article configuration generate a flow with thermal and chemical nonequilibrium, which are common attributes of hypersonic flight. This scenario was first studied experimentally at Calspan University of Buffalo Research Center’s test facility. DMS is a particle method that uses quantum mechanically derived interaction potentials to simulate molecular collisions within a flow field. Since these interaction potentials are the only modeling inputs used in the simulation, all flow features can solely be attributed to the ab initio potential energy surfaces. Hence, providing a comparison of a hypersonic ground test and numerical data anchored to quantum mechanics. The fundamental nature of DMS is leveraged to investigate molecular level mechanisms prevalent in the flow, and comparisons with lower fidelity simulations are presented to highlight the role of these first principles calculations as benchmark solutions.

Science & Technology - Other Topics↗
NASA NTRS2021

An Aerodynamics Database for Aerocapture of a Conceptual Morphable Entry System at Mars

An aerodynamics database for aerocapture of a conceptual morphable entry system at Mars was developed. The vehicle is envisioned to employ deflections of its geometry to modulate angle of attack and sideslip angle for trajectory control. Modified Newtonian methods were used to compute hypersonic continuum aerodynamics. Direct simulation Monte Carlo calculations were carried out to compute data in the rarefied transitional regime. Free-molecular theory was used to compute values in the free-molecular regime. A bridging function method was then used to bridge data from all three flow regimes together and produce a database that can be used for future trajectory simulations to assess the vehicle’s performance. The vehicle was found to have the control authority in hypersonic continuum to effect an 18 deg change in the trim angle of attack using a 10 deg deflection of the pitching control surfaces. Similarly, a 6 deg change in the trim sideslip angle could be achieved with a 5 deg deflection of the yawing control surfaces. Different configurations of the vehicle were found to be statically stable in pitch and yaw in the continuum regime, but unstable in the rarefied and free-molecular regimes.

aerocapture↗
DOE OSTI2025

Optimizing microfluidic flow cell geometry for in situ resonant soft X-ray characterization of molecular nanostructures

Liquid-phase resonant soft X-ray scattering (LP-RSoXS) is an emerging label-free technique to probe chemically resolved nanostructures of molecular or hybrid materials in liquid environments. Still, quantitative analysis is hindered by the pressure-induced deformation of thin silicon nitride (SiN) membranes used as windows in microfluidic flow cells, which attenuates the signal in nonlinear ways, making experimental optimization difficult. Here, in this work, we directly characterize this deformation under experimental conditions for a variety of cell configurations. We use this to develop a predictive model that combines transmission effects of SiN bowing, incident X-ray beam profiles, and material-dependent resonant scattering cross sections to simulate the effective scattering intensity at the detector across the carbon K-edge. Maps of the total signal across the flow cell window reveal that increasing the window width and polymer concentration shifts the anisotropic intensity distributions from the center toward the edges of the window. It was determined that an optimal SiN thickness of 50 nm, with a window aperture of 104 μm, maximizes the total signal for typical solute concentrations and energies across the carbon K-edge. Our results overturn the assumption that corner regions dominate the scattering signal, offering explicit design guidelines for maximizing LP-RSoXS signals and significantly advancing the quantitative application of this technique to the characterization of molecular and hybrid nanostructured materials in liquids.

Grabner, Devin [Washington State Univ., Pullman, W↗
DOE OSTI2025

Shear-Induced Conformations of Salt-Free Polyelectrolytes in Semidilute Solutions

Here, we present coarse-grained molecular dynamics simulations of salt-free polyelectrolyte chains in semidilute solutions under simple shear flow, with full hydrodynamic interactions and explicit dipolar solvent. At equilibrium, chain orientation statistics follow a pseudo-Voigt distribution, and the structural correlation length and chain end-to-end vector autocorrelation function exhibit scaling behavior consistent with theoretical predictions for polyelectrolytes. Under shear, chains transition from coiled to stretched states and the end-to-end vector autocorrelation function reveals oscillatory dynamics at high Weissenberg numbers. Analysis of the gyration tensor and shear strain distributions identified three distinct chain populations with directional alignment along and against the shear gradient. Compared with their neutral polymer counterparts, polyelectrolytes exhibit stronger shear thinning and enhanced chain alignment under the same Weissenberg number, which is attributed to electrostatic interactions and shear-induced counterion release. These findings provide molecular insight into the distinct flow response of charged polymers and have implications for tailoring the rheological properties of polyelectrolyte-based materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1983

Supersonic-nitrogen flow-field measurements with the resonant Doppler velocimeter

The application of the resonant Doppler velocimeter (RDV) for obtaining the mean velocity, temperature, and pressure measurements and flow-field visualization in a supersonic free nitrogen jet is reported. This method utilizes laser-induced fluorescence to determine the spectral absorption of an atomic or molecular species seeded into the flow. A narrow linewidth tunable laser is directed into the flow and the total fluorescence from any point is obtained as the laser is tuned. The velocity of the flow is obtained from the Doppler shifted absorption frequency, and the temperature and pressure of the gas are determined from line broadening measurements. Results are presented for the use of this technique to determine the velocity, temperature, and pressure of the flow of sodium atoms seeded into a supersonic nitrogen jet. It is concluded that the visible signal is sufficiently intense for spatially resolved flow visualization purposes.

Cheng, S.↗
NASA NTRS1988

Additives Improve Processing Of Polyimides

Melt-processable polyimides maintain desirable polymer properties prepared by adding small amounts of certain low-molecular-weight, thermally stable additives. Useful in preparing void-free polyimide composites from higher flow resins that wet out fibers at lower processing temperatures. Applied to preparing high-temperature polyimide adhesives allowing enhanced wetting of adherends and ultimately better adhesion. Improvement to processing polyimides and potential application for production of films, coatings, adhesives, and composites.

St. Clair, Terry L.↗
NASA NTRS1986

Kinetic studies of the reaction of the SO radical with NO2 and ClO from 210 to 363 K

The rates of the reactions of the SO radical with NO2 and ClO (significant in the upper atmosphere of earth and Venus) were determined in a discharge flow system near 1 torr pressure with detection of radical and molecular species using collision-free sampling mass spectrometry. The rate constants were obtained from the decay of SO radicals in the presence of an excess of NO2 and ClO. The NO2 reaction was examined between 210 and 363 K and found to be temperature invariant: SO + NO2 yields SO2 + NO; k1 = (1.37 + or - 0.10) x 10 to the -11th cu cm/s. In addition, the ClO reaction was observed to be independent of temperature between 248 and 363 K: SO + ClO yields SO2 + Cl; k2 = (3.22 + or - 0.48) x 10 to the -11th cu cm/s. A comparison was made with previous investigations of these reactions at room temperature and with other radical-radical reactions involving SO or ClO.

Brunning, J.↗
NASA NTRS2015

Feasibility of Rayleigh Scattering Flow Diagnostics in the National Transonic Facility

Laser-based Rayleigh light scattering (RLS) was performed in the National Transonic Facility (NTF) at NASA Langley Research Center. The goal was to determine if the free-stream flow undergoes clustering (early stage of condensation from gas to liquid) or remains in a pure diatomic molecular phase. Data indicate that clusters are not observable down to levels of 10% of the total light scatter for a variety of total pressures at one N2 cryogenic-mode total temperature (Tt = -50 F = 227 K) and one air-mode temperature (Tt = +130 F = 327 K). Thus RLS appears viable as a qualitative or quantitative diagnostic for flow density in NTF in the future. Particles are distinguished from optically unresolvable clusters because they are much larger and individually resolvable in the laser beam image with Mie scattering. The same RLS apparatus was also used, without modification, to visualize naturally occurring particles entrained in the flow for both cryogenic and air-modes. Estimates of the free-stream particle flux are presented, which may be important for interpretation of laminar-to-turbulent boundary-layer transition studies. 1

Herring, Gregory C.↗
NASA NTRS1984

Molecular velocimetry using stimulated Raman spectroscopy

Molecular flow velocity of N2 was measured in a supersonic wind tunnel using inverse Raman spectroscopy. This technique employs the large Doppler shift exhibited by the molecules when the pump and probe laser beams are counter-propagating (backward scattering). A retrometer system is employed to yield a vibration-free optical configuration which has the additional advantage of obtaining both the forward and backward scattered spectra simultaneously. The linebreadths and their relative Doppler shift can be used to determine the static pressure, translational temperature, and molecular flow velocity. A demonstration of the concept was performed in a supersonic wind tunnel and included: (1) measurements over the Mach number range 2.50 to 4.63; (2) static pressure measurements (at Mach 2.50) corresponding to a Reynolds number per foot range of 1 to 5 x 10 to the 6th power; and (3) measurements behind the shock wave of a flat plate model.

Exton, R. J.↗
NASA NTRS2012

Emission Spectroscopy and Radiometric Measurements in the NASA Ames IHF Arc Jet Facility

Plasma diagnostic measurement campaigns in the NASA Ames Interaction Heating Facility (IHF) have been conducted over the last several years with a view towards characterizing the flow in the arc jet facility by providing data necessary for modeling and simulation. Optical emission spectroscopy has been used in the plenum and in the free jet of the nozzle. Radiation incident over a probe surface has also been measured using radiometry. Plenum measurements have shown distinct radial profiles of temperature over a range of operating conditions. For cases where large amounts of cold air are added radially to the main arc-heated stream, the temperature profiles are higher by as much as 1500 K than the profiles assumed in flow simulations. Optical measurements perpendicular to the flow direction in the free jet showed significant contributions to the molecule emission through inverse pre-dissociation, thus allowing determination of atom number densities from molecular emission. This has been preliminarily demonstrated with the N2 1st Positive System. Despite the use of older rate coefficients, the resulting atom densities are reasonable and surprisingly close to flow predictions.

Winter, Michael W.↗