Search NASA⌕ Search

SEARCH · Search NASA

Results for “Feature selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Achromatical Optical Correlator

Signal-to-noise ratio exceeds that of monochromatic correlator. Achromatical optical correlator uses multiple-pinhole diffraction of dispersed white light to form superposed multiple correlations of input and reference images in output plane. Set of matched spatial filters made by multiple-exposure holographic process, each exposure using suitably-scaled input image and suitable angle of reference beam. Recording-aperture mask translated to appropriate horizontal position for each exposure. Noncoherent illumination suitable for applications involving recognition of color and determination of scale. When fully developed achromatical correlators will be useful for recognition of patterns; for example, in industrial inspection and search for selected features in aerial photographs.

Chao, Tien-Hsin↗
NASA NTRS1989

HIRIS performance study

The remote sensing system simulation is used to study a proposed sensor concept. An overview of the instrument and its parameters is presented, along with the model of the instrument as implemented in the simulation. Signal-to-noise levels of the instrument under a variety of system configurations are presented and discussed. Classification performance under these varying configurations is also shown, along with relationships between signal-to-noise ratios, feature selection, and classification performance.

Kerekes, John P.↗
NASA NTRS1990

Evaluation plan for space station network interface units

Outlined here is a procedure for evaluating network interface units (NIUs) produced for the Space Station program. The procedures should be equally applicable to the data management system (DMS) testbed NIUs produced by Honeywell and IBM. The evaluation procedures are divided into four areas. Performance measurement tools are hardware and software that must be developed in order to evaluate NIU performance. Performance tests are a series of tests, each of which documents some specific characteristic of NIU and/or network performance. In general, these performance tests quantify the speed, capacity, latency, and reliability of message transmission under a wide variety of conditions. Functionality tests are a series of tests and code inspections that demonstrate the functionality of the particular subset of ISO protocols which have been implemented in a given NIU. Conformance tests are a series of tests which would expose whether or not selected features within the ISO protocols are present and interoperable.

Weaver, Alfred C.↗
NASA NTRS1990

A survey of decision tree classifier methodology

Decision Tree Classifiers (DTC's) are used successfully in many diverse areas such as radar signal classification, character recognition, remote sensing, medical diagnosis, expert systems, and speech recognition. Perhaps, the most important feature of DTC's is their capability to break down a complex decision-making process into a collection of simpler decisions, thus providing a solution which is often easier to interpret. A survey of current methods is presented for DTC designs and the various existing issue. After considering potential advantages of DTC's over single stage classifiers, subjects of tree structure design, feature selection at each internal node, and decision and search strategies are discussed.

Safavian, S. Rasoul↗
NASA NTRS1992

Laser-Power Controller

New controller used in place of commercial controller. Provides precision and simplicity of digital settings, and all timing determined by digital circuits. Built-in circuit counts number of pulses in, and thereby provides control over, duration of each burst; duration set at precise value within wide range or each pulse set precisely. Controller easily adaptable to computer control: single switch used to select either manual or computer control. Another single-switch selection feature provides choice between counting of pulses in, and manual timing of, bursts.

Smith, William C.↗
NASA NTRS1991

Rule groupings in expert systems using nearest neighbour decision rules, and convex hulls

Expert System shells are lacking in many areas of software engineering. Large rule based systems are not semantically comprehensible, difficult to debug, and impossible to modify or validate. Partitioning a set of rules found in CLIPS (C Language Integrated Production System) into groups of rules which reflect the underlying semantic subdomains of the problem, will address adequately the concerns stated above. Techniques are introduced to structure a CLIPS rule base into groups of rules that inherently have common semantic information. The concepts involved are imported from the field of A.I., Pattern Recognition, and Statistical Inference. Techniques focus on the areas of feature selection, classification, and a criteria of how 'good' the classification technique is, based on Bayesian Decision Theory. A variety of distance metrics are discussed for measuring the 'closeness' of CLIPS rules and various Nearest Neighbor classification algorithms are described based on the above metric.

Anastasiadis, Stergios↗
NASA NTRS1991

A survey of decision tree classifier methodology

Decision tree classifiers (DTCs) are used successfully in many diverse areas such as radar signal classification, character recognition, remote sensing, medical diagnosis, expert systems, and speech recognition. Perhaps the most important feature of DTCs is their capability to break down a complex decision-making process into a collection of simpler decisions, thus providing a solution which is often easier to interpret. A survey of current methods is presented for DTC designs and the various existing issues. After considering potential advantages of DTCs over single-state classifiers, subjects of tree structure design, feature selection at each internal node, and decision and search strategies are discussed.

Safavian, S. R.↗
NASA NTRS1992

SRB thermal curtain design support

Improvements in SRB Thermal Curtain were identified by thermal design featuring: selection of materials capable of thermal protection and service temperatures by tri-layering quartz, S2 glass, and Kevlar in thinner cross section; weaving in single piece (instead of 24 sections) to achieve improved strength; and weaving to reduce manufacturing cost with angle interlock construction.

Dixon, Carl A.↗
NASA NTRS1998

Support Vector Machines for Hyperspectral Remote Sensing Classification

The Support Vector Machine provides a new way to design classification algorithms which learn from examples (supervised learning) and generalize when applied to new data. We demonstrate its success on a difficult classification problem from hyperspectral remote sensing, where we obtain performances of 96%, and 87% correct for a 4 class problem, and a 16 class problem respectively. These results are somewhat better than other recent results on the same data. A key feature of this classifier is its ability to use high-dimensional data without the usual recourse to a feature selection step to reduce the dimensionality of the data. For this application, this is important, as hyperspectral data consists of several hundred contiguous spectral channels for each exemplar. We provide an introduction to this new approach, and demonstrate its application to classification of an agriculture scene.

Gualtieri, J. Anthony↗
NASA NTRS2004

Software Assurance of PLCs Training Course

Being heavily visually-oriented, I am a firm believer in communication and conveying emotions through the art of color, motion, and transformation. A four-part online training course was created in PowerPoint and needed to be translated over into a Flash format. Issues with the Powerpoint were that the size of the files caused noticeable delays when placed online, there were compatibility issues, and from a composition and design perspective, color schemes and layout left much to be desired. High contrast, pixilated yellow text spiraling and flying on to a background of overly rich hues of blue with cheesy gradient patterns was just not appeasing to my eye, along with the menu directory buttons located at the top resembling blue pills of NyQuil on top of a stale gray border that had nothing to do with the background. The course itself is extremely broad and verbose, and will get monotonous very soon after starting. Moving about the course was very cumbersome as well. efficient by drastically reducing the size (The file size of all four parts of the actual course combined will ultimately not even be a fifth as big as one part of the original PowerPoint alone!); along with that, the course was made to be more interactive and user-friendly, as well as pleasing to the eye. Upon being viewed by fellow co-workers, nothing but positive feedback has been received. When beginning the presentation, onscreen comes a 3' 2" chubby, balding professor, who is a master in his knowledge of Programmable Logic Controllers (PLCs). He introduces himself and presents all of his vast knowledge over PLCs in a fun and innovative manner, making it much easier to acquire the information presented. A Scene Selection feature has been added making it a lot easier to jump from part to part and the back and forth arrows are much easier to utilize, and they are both less obtrusive than its PowerPoint predecessor. The user can also go at their pace, as the presentation pauses after at the end of each statement. computer animation, it was.. .still. ..animation done on a computer. I was able to incorporate my artistic talent and intuitive creativity into it, one thing I am very proficient at doing when it comes to what I do and what I will do in my profession as an artist/computer animator. At first, I felt that there was no place for an artist within a faculty of scientists, engineers, chemists, mathematicians, and programmers, but I managed to fit in quite successfully. My task was to convert the course into a Flash format, which would make it much more My project surprisingly somewhat dealt with my field of interest-though it was not

Threatt, Jamarr↗
NASA NTRS2007

Mapped Landmark Algorithm for Precision Landing

A report discusses a computer vision algorithm for position estimation to enable precision landing during planetary descent. The Descent Image Motion Estimation System for the Mars Exploration Rovers has been used as a starting point for creating code for precision, terrain-relative navigation during planetary landing. The algorithm is designed to be general because it handles images taken at different scales and resolutions relative to the map, and can produce mapped landmark matches for any planetary terrain of sufficient texture. These matches provide a measurement of horizontal position relative to a known landing site specified on the surface map. Multiple mapped landmarks generated per image allow for automatic detection and elimination of bad matches. Attitude and position can be generated from each image; this image-based attitude measurement can be used by the onboard navigation filter to improve the attitude estimate, which will improve the position estimates. The algorithm uses normalized correlation of grayscale images, producing precise, sub-pixel images. The algorithm has been broken into two sub-algorithms: (1) FFT Map Matching (see figure), which matches a single large template by correlation in the frequency domain, and (2) Mapped Landmark Refinement, which matches many small templates by correlation in the spatial domain. Each relies on feature selection, the homography transform, and 3D image correlation. The algorithm is implemented in C++ and is rated at Technology Readiness Level (TRL) 4.

Johnson, Andrew↗
NASA NTRS2011

Pattern Recognition for a Flight Dynamics Monte Carlo Simulation

The design, analysis, and verification and validation of a spacecraft relies heavily on Monte Carlo simulations. Modern computational techniques are able to generate large amounts of Monte Carlo data but flight dynamics engineers lack the time and resources to analyze it all. The growing amounts of data combined with the diminished available time of engineers motivates the need to automate the analysis process. Pattern recognition algorithms are an innovative way of analyzing flight dynamics data efficiently. They can search large data sets for specific patterns and highlight critical variables so analysts can focus their analysis efforts. This work combines a few tractable pattern recognition algorithms with basic flight dynamics concepts to build a practical analysis tool for Monte Carlo simulations. Current results show that this tool can quickly and automatically identify individual design parameters, and most importantly, specific combinations of parameters that should be avoided in order to prevent specific system failures. The current version uses a kernel density estimation algorithm and a sequential feature selection algorithm combined with a k-nearest neighbor classifier to find and rank important design parameters. This provides an increased level of confidence in the analysis and saves a significant amount of time.

Restrepo, Carolina↗
NASA NTRS2011

Optimizing Muscle Parameters in Musculoskeletal Modeling Using Monte Carlo Simulations

Astronauts assigned to long-duration missions experience bone and muscle atrophy in the lower limbs. The use of musculoskeletal simulation software has become a useful tool for modeling joint and muscle forces during human activity in reduced gravity as access to direct experimentation is limited. Knowledge of muscle and joint loads can better inform the design of exercise protocols and exercise countermeasure equipment. In this study, the LifeModeler(TM) (San Clemente, CA) biomechanics simulation software was used to model a squat exercise. The initial model using default parameters yielded physiologically reasonable hip-joint forces. However, no activation was predicted in some large muscles such as rectus femoris, which have been shown to be active in 1-g performance of the activity. Parametric testing was conducted using Monte Carlo methods and combinatorial reduction to find a muscle parameter set that more closely matched physiologically observed activation patterns during the squat exercise. Peak hip joint force using the default parameters was 2.96 times body weight (BW) and increased to 3.21 BW in an optimized, feature-selected test case. The rectus femoris was predicted to peak at 60.1% activation following muscle recruitment optimization, compared to 19.2% activation with default parameters. These results indicate the critical role that muscle parameters play in joint force estimation and the need for exploration of the solution space to achieve physiologically realistic muscle activation.

Hanson, Andrea↗
NASA NTRS2006

Optimized Algorithms for Prediction within Robotic Tele-Operative Interfaces

Robonaut, the humanoid robot developed at the Dexterous Robotics Laboratory at NASA Johnson Space Center serves as a testbed for human-robot collaboration research and development efforts. One of the primary efforts investigates how adjustable autonomy can provide for a safe and more effective completion of manipulation-based tasks. A predictive algorithm developed in previous work was deployed as part of a software interface that can be used for long-distance tele-operation. In this paper we provide the details of this algorithm, how to improve upon the methods via optimization, and also present viable alternatives to the original algorithmic approach. We show that all of the algorithms presented can be optimized to meet the specifications of the metrics shown as being useful for measuring the performance of the predictive methods. Judicious feature selection also plays a significant role in the conclusions drawn.

Martin, Rodney A.↗
NASA NTRS2020

Application of Machine Learning Techniques to Aviation Operations: NASA Case Studies

There is an increasing interest in applying methods based on Machine Learning Techniques(MLT) to problems in aviation operations. The current interest is based on developments in Cloud Computing, the availability of open software and the success of MLT in automation, consumer behavior and finance involving large database. Historically aviation operations have been analyzed using physics-based models and provide information for making operational decisions. This talk describes issues to be addressed in applying either model-driven or data-driven methods. Aviation operations involving many decision makers, multiple objectives, poor or unavailable physics-based models and a rich historical database are prime candidates for analysis using data-driven methods. The issues relating to data, feature selection and validation of the models are illustrated by examining case studies of the application of MLT to problems in air traffic management at NASA. Further research is needed in the application of MLT to critical aviation operations. As always, the best approach depends on the task, the physical understanding of the problem and the quality and quantity of the available data.

Sridhar, Banavar↗
NASA NTRSDate not supplied

Lessons Learned in the Application of Machine Learning Techniques to Air Traffic Management

There is an increasing interest in applying methods based on Machine Learning Techniques (MLT) to problems in Air Traffic Management (ATM). The current interest is based on developments in Cloud Computing, the availability of open software and the success of MLT in automation, consumer behavior and finance involving large databases. This paper reviews the current-state-of-the art in applying MLT to aviation operations, its promises and challenges. Historically aviation operations have been analyzed using physics-based models and provide information for making operational decisions. Aviation operations involving many decision makers, multiple objectives, poor or unavailable physics-based models and a rich historical database are prime candidates for analysis using data-driven methods. The promises and challenges in applying MLT to ATM is traced through three examples based on the authors’ experience, each separated by a decade, to show the influence of data and feature selection in the successful application of MLT to ATM. As always, the best approach depends on the task, the physical understanding of the problem and the quality and quantity of the available data.

Machine Learning Techniques↗
NASA NTRS2017

Intelligent multi-spectral IR image segmentation

We present a neural network based multi-­‐spectral image segmentation method. A neural network is trained on the selected features of both the objects and background in the longwave (LW) Infrared (IR) images. Multiple iterations of training are performed until the accuracy of the segmentation reaches satisfactory level. The segmentation boundary of the LW image is used to segment the midwave (MW) and shortwave (SW) IR images. A second neural network detects the local discontinuities and refines the accuracy of the local boundaries. The neural net based segmentation method is compared with Wavelet-­‐threshold and Grab-­‐Cut methods. Test results have shown increased accuracy and robustness of this segmentation scheme for multi-­‐spectral IR images.

Torres, Gilbert↗
NASA NTRS2020

Advancing Methodologies for Applying Machine Learning and Evaluating Spatiotemporal Models of Fine Particulate Matter (PM 2.5 ) Using Satellite Data Over Large Regions

Reconstructing the distribution of fine particulate matter (PM 2.5 ) in space and time, even far from ground monitoring sites, is an important exposure science contribution to epidemiologic analyses of PM 2.5 health impacts. Flexible statistical methods for prediction have demonstrated the integration of satellite observations with other predictors, yet these algorithms are susceptible to overfitting the spatiotemporal structure of the training datasets. We present a new approach for predicting PM 2.5 using machine-learning methods and evaluating prediction models for the goal of making predictions where they were not previously available. We apply extreme gradient boosting (XGBoost) modeling to predict daily PM 2.5 on a 1 x 1 km 2 resolution for a 13 state region in the Northeastern USA for the years 2000–2015 using satellite-derived aerosol optical depth and implement a recursive feature selection to develop a parsimonious model. We demonstrate excellent predictions of withheld observations but also contrast an RMSE of 3.11 μg/m 3 in our spatial cross-validation withholding nearby sites versus an overfit RMSE of 2.10 μg/m 3 using a more conventional random ten-fold splitting of the dataset. As the field of exposure science moves forward with the use of advanced machine-learning approaches for spatiotemporal modeling of air pollutants, our results show the importance of addressing data leakage in training, overfitting to spatiotemporal structure, and the impact of the predominance of ground monitoring sites in dense urban sub-networks on model evaluation. The strengths of our resultant modeling approach for exposure in epidemiologic studies of PM 2.5 include improved efficiency, parsimony, and interpretability with robust validation while still accommodating complex spatiotemporal relationships.

air pollution↗