Search NASA⌕ Search

SEARCH · Search NASA

Results for “Feature similarity measurement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Emission of nearly stripped carbon and oxygen from the sun

Energy spectra of nearly stripped carbon and oxygen nuclei were observed during several solar particle events indicating a systematic deviation of these spectra from a simple power law. The spectra bend below 100 keV per nucleon and the degree of turn-over are highly correlated with the size of the flare, as measured by the event averaged flux of 130 to 220 keV protons. The energy spectra of helium computed for the same time periods do not show a similar feature. A large variability of the alpha/CNO ratio from event to event (from 2 to about 20 at 40 keV per nucleon) is found, and, in all cases examined, the carbon and oxygen nuclei are nearly fully stripped. These results are interpreted as evidence for storage of energetic ions in hot (T sub e is approximatey 1.5 million K) coronal regions, followed by strong adiabatic deceleration.

Sciambi, R. K.↗

Ultraviolet spectroscopy of Venus - Initial results from the Pioneer Venus orbiter

Ultraviolet spectroscopy of the Venus cloud tops reveals absorption features attributed to sulfur dioxide in the atmosphere above the cloud tops. Measurements of scattered sunlight at 2663 angstroms show evidence for horizontal and vertical inhomogeneities in cloud structure. Images of the planet at SO2 absorption wavelengths show albedo features similar to those seen at 3650 angstroms from Mariner 10. Airglow emissions are consistent with an exospheric temperature of about 275 K, and a night airglow emission has been detected, indicating the precipitation of energy into the dark thermosphere.

Stewart, A. I.↗

Subkilometer Martian volcanoes - Properties and possible terrestrial analogs

Kilometer to subkilometer cones with large central craters are the most numerous volcanic structures in the northern plains of Mars. Based on examination of more than 12,000 high resolution Viking Orbiter images, most of these very small cones are located in parts of Eastern Acidalia and Utopia-Isidis-Elysium Planitia. Measurements of base and pit diameter for some 2000 well-resolved features show small variations in the histogram of base diameters between and within regions but remarkable similarity in the distribution of crater/cone diameter ratios. This suggests that the small cones had a similar origin with only minor variations in local conditions. The Acidalia cones are generally larger, more widely distributed, and occur on a greater variety of terrains than those in Utopia-Isidis-Elysium. Based on morphology, distribution, and the crater/cone ratio histograms, the smallest Martian cones may be similar to Icelandic pseudocraters. Somewhat larger, steeper cones with smaller crater/cone ratios which also occur in Eastern Acidalia may be analogs of terrestrial cinder cones.

Frey, H.↗

The case for a Martian origin of the shergottites - Nitrogen and noble gases in EETA 79001

Nitrogen and noble gases have been measured in samples of a glass inclusion and its surrounding basaltic matrix in an Antarctic shergottite meteorite (EETA 79001). The nitrogen component was found trapped in the glass, but not the matrix, having a value of delta 15-N = +190 per mil. Ratios between abundances of Ar-40 and N-14, N-15 and N-14 in the glass are consistent with the dilution of a Martian atmospheric component. The trapped noble gases in the glass are similar to elemental and isotopic compositions measured in Mars atmosphere by the Viking lander, and are in general agreement with previous measurements. It is suggested that a sample of Martian atmosphere has been caught in the EETA 79001 glass, and that other shergottite, nakhilite, and chassignite meteorites with similar features probably also originated on Mars. A table is presented which lists the abundances of nitrogen and the noble gases found in the non-glassy matrix and in the EETA 79001 glass.

Becker, R. H.↗

A review of path-independent integrals in elastic-plastic fracture mechanics, task 4

The path independent (P-I) integrals in elastic plastic fracture mechanics which have been proposed in recent years to overcome the limitations imposed on the J integral are reviewed. The P-I integrals considered herein are the J integral by Rice, the thermoelastic P-I integrals by Wilson and Yu and by Gurtin, the J* integral by Blackburn, the J sub theta integral by Ainsworth et al., the J integral by Kishimoto et al., and the delta T sub p and delta T* sub p integrals by Atluri et al. The theoretical foundation of these P-I integrals is examined with emphasis on whether or not path independence is maintained in the presence of nonproportional loading and unloading in the plastic regime, thermal gradients, and material inhomogeneities. The similarities, differences, salient features, and limitations of these P-I integrals are discussed. Comments are also made with regard to the physical meaning, the possibility of experimental measurement, and computational aspects.

Kim, K. S.↗

Constraining the Metallicities, Ages, Star Formation Histories, and Ionizing Continua of Extragalactic Massive Star Populations

We infer the properties of massive star populations using the far-ultraviolet stellar continua of 61 star-forming galaxies: 42 at low redshift observed with the Hubble Space Telescope and 19 at z ~ 2 from the MegaSaura sample. We fit each stellar continuum with a linear combination of up to 50 single-age and single-metallicity starburst99 models. From these fits, we derive light-weighted ages and metallicities, which agree with stellar wind and photospheric spectral features, and infer the spectral shapes and strengths of the ionizing continua. Inferred light-weighted stellar metallicities span 0.05–1.5 Z(sub ⊙) and are similar to the measured nebular metallicities. We quantify the ionizing continua using the ratio of the ionizing flux at 900 Å to the non-ionizing flux at 1500 Å and demonstrate the evolution of this ratio with stellar age and metallicity using theoretical single-burst models. These single-burst models only match the inferred ionizing continua of half of the sample, while the other half are described by a mixture of stellar ages. Mixed-age populations produce stronger and harder ionizing spectra than continuous star formation histories, but, contrary to previous studies that assume constant star formation, have similar stellar and nebular metallicities. Stellar population age and metallicity affect the far-UV continua in different and distinguishable ways; assuming a constant star formation history diminishes the diagnostic power. Finally, we provide simple prescriptions to determine the ionizing photon production efficiency (ξ(sub ion)) from the stellar population properties. The ξ(sub ion) inferred from the observed star-forming galaxies has a range of log(ξ(sub ion)) = 24.4–25.7 Hz erg(exp −1) that depends on the stellar population age, metallicity, star formation history, and contributions from binary star evolution. These stellar population properties must be observationally determined to accurately determine the number of ionizing photons generated by massive stars.

Chisholm, J.↗

On an Extensive Late Hydrologic Event in Gale Crater as Indicated by Water‐Rich Fracture Halos

Abstract We analyze spatially pervasive, light‐toned “halos” associated with fractures in a sedimentary unit (Stimson) of Gale crater, Mars, and report a similar network of halos discovered in a separate geologic group (Bradbury). Through a dedicated active neutron measurement campaign, we provide independent confirmation of the water‐rich nature of these features. Together with mineralogical and geochemical data, these features are consistent with abundant hydrated amorphous silica (opal‐A). We suggest that the mineral and amorphous assemblages are indicative of formation under low‐temperature and predominantly low‐pH conditions (passive silica enrichment) with minor contribution of silica (active silica enrichment) from adjacent units. We show that there is significant amorphous silica in the array of sedimentary rocks in Gale crater, allowing them to play a role in an active silica enrichment phase of halo formation. We suggest that the involved alteration event was short lived and our finding of vast halo networks in a distant, older unit implies a more vast network of hydrologic subsurface conduits than previously known. This relatively recent subsurface hydrologic system was present long after the transition from a warm and wet to a cold and dry Martian environment, extending the habitability conditions on Mars to an epoch that is generally considered not favorable for life on the surface. Finally, our bulk H quantification of these features, which ranges from ∼3–6 wt% H 2 O‐equivalent‐H, suggests that the amorphous material in halos hosts ample supplies of readily released water, making them a considerable resource at the otherwise dry Martian equator.

Gabriel, Travis S. J.↗

Magnetic field rotation at high solar latitudes

Measurements of the rotation rate of polar magnetic features during 1974-76 lead to a significantly slower rotation rate than that found earlier for polar faculae in 1951-54. Similarly, the rotation rate of these features is slower than the Doppler-determined rate at polar latitudes or the rotation rate of polar filaments. It is suggested that the strong latitude rotation gradient in the subsurface magnetic flux tubes which is implied by these results may presage a very active solar maximum for cycle 21.

Howard, R.↗

Hemispherical emissivity of V, Nb, Ta, Mo, and W from 300 to 1000 K

The hemispherical emissivities of five transition elements, V, Nb, Ta, Mo, and W, have been measured from 300 to 1000 K, complementing earlier higher-temperature results. These low-temperature data, which are similar, are fitted to a Drude model in which the room-temperature parameters have been obtained from optical measurements and the temperature dependence of the dc resistivity is used as input to calculate the temperature dependence of the emissivity. A frequency-dependent free-carrier relaxation rate is found to have a similar magnitude for all these elements. For temperatures larger than 1200 K the calculated emissivity is always greater than the measured value, indicating that the high-temperature interband features of transition elements are much weaker than those determined from room-temperature measurements.

Cheng, S. X.↗

Performance Evaluation of a High Bandwidth Liquid Fuel Modulation Valve for Active Combustion Control

At the NASA Glenn Research Center, a characterization rig was designed and constructed for the purpose of evaluating high bandwidth liquid fuel modulation devices to determine their suitability for active combustion control research. Incorporated into the rig s design are features that approximate conditions similar to those that would be encountered by a candidate device if it were installed on an actual combustion research rig. The characterized dynamic performance measures obtained through testing in the rig are planned to be accurate indicators of expected performance in an actual combustion testing environment. To evaluate how well the characterization rig predicts fuel modulator dynamic performance, characterization rig data was compared with performance data for a fuel modulator candidate when the candidate was in operation during combustion testing. Specifically, the nominal and off-nominal performance data for a magnetostrictive-actuated proportional fuel modulation valve is described. Valve performance data were collected with the characterization rig configured to emulate two different combustion rig fuel feed systems. Fuel mass flows and pressures, fuel feed line lengths, and fuel injector orifice size was approximated in the characterization rig. Valve performance data were also collected with the valve modulating the fuel into the two combustor rigs. Comparison of the predicted and actual valve performance data show that when the valve is operated near its design condition the characterization rig can appropriately predict the installed performance of the valve. Improvements to the characterization rig and accompanying modeling activities are underway to more accurately predict performance, especially for the devices under development to modulate fuel into the much smaller fuel injectors anticipated in future lean-burning low-emissions aircraft engine combustors.

Saus, Joseph R.↗

Investigation of Global Particulate Nitrate from the AeroCom Phase III Experiment

An assessment of global particulate nitrate and ammonium aerosol based on simulations from nine models participating in the Aerosol Comparisons between Observations and Models (AeroCom) phase III study is presented. A budget analysis was conducted to understand the typical magnitude, distribution, and diversity of the aerosols and their precursors among the models. To gain confidence regarding model performance, the model results were evaluated with various observations globally, including ground station measurements over North America, Europe, and east Asia for tracer concentrations and dry and wet depositions, as well as with aircraft measurements in the Northern Hemisphere mid-to-high latitudes for tracer vertical distributions. Given the unique chemical and physical features of the nitrate occurrence, we further investigated the similarity and differentiation among the models by examining (1) the pH-dependent NH3 wet deposition; (2) the nitrate formation via heterogeneous chemistry on the surface of dust and sea salt particles or thermodynamic equilibrium calculation including dust and sea salt ions; and (3) the nitrate coarse-mode fraction (i.e., coarse/total). It is found that HNO3, which is simulated explicitly based on full O3-HOx-NOx-aerosol chemistry by all models, differs by up to a factor of 9 among the models in its global tropospheric burden. This partially contributes to a large difference in NO3(-), whose atmospheric burden differs by up to a factor of 13. The atmospheric burdens of NH3 and NHC 4 differ by 17 and 4, respectively. Analyses at the process level show that the large diversity in atmospheric burdens of NO3(-), NH3, and NHC4(+) is also related to deposition processes. Wet deposition seems to be the dominant process in determining the diversity in NH3 and NHC 4 lifetimes. It is critical to correctly account for contributions of heterogeneous chemical production of nitrate on dust and sea salt, because this process overwhelmingly controls atmospheric nitrate production (typically greater than 80 %) and determines the coarse- and fine-mode distribution of nitrate aerosol.

Ammonium aerosol based on simulations↗

Properties of protein unfolded states suggest broad selection for expanded conformational ensembles

Much attention is being paid to conformational biases in the ensembles of intrinsically disordered proteins. However, it is currently unknown whether or how conformational biases within the disordered ensembles of foldable proteins affect function in vivo. Recently, we demonstrated that water can be a good solvent for unfolded polypeptide chains, even those with a hydrophobic and charged sequence composition typical of folded proteins. These results run counter to the generally accepted model that protein folding begins with hydrophobicity-driven chain collapse. Here we investigate what other features, beyond amino acid composition, govern chain collapse. We found that local clustering of hydrophobic and/or charged residues leads to significant collapse of the unfolded ensemble of pertactin, a secreted autotransporter virulence protein from Bordetella pertussis , as measured by small angle X-ray scattering (SAXS). Sequence patterns that lead to collapse also correlate with increased intermolecular polypeptide chain association and aggregation. Crucially, sequence patterns that support an expanded conformational ensemble enhance pertactin secretion to the bacterial cell surface. Similar sequence pattern features are enriched across the large and diverse family of autotransporter virulence proteins, suggesting sequence patterns that favor an expanded conformational ensemble are under selection for efficient autotransporter protein secretion, a necessary prerequisite for virulence. More broadly, we found that sequence patterns that lead to more expanded conformational ensembles are enriched across water-soluble proteins in general, suggesting protein sequences are under selection to regulate collapse and minimize protein aggregation, in addition to their roles in stabilizing folded protein structures.

59 BASIC BIOLOGICAL SCIENCES↗

Remote and Ground Truth Spectral Measurement Comparisons of FORMOSAT III

FORMOSAT III are a set of six research satellites from Taiwan that were launched in April 2006. The satellites are in 800 km, 71 degree inclination orbits and separated by 24 degrees in ascending node. Laboratory spectral measurements were taken of outer surface materials on FORMOSAT III. From those measurements, a computer model was built to predict the spectral reflectance accounting for both solar phase angle and orientation of the spacecraft relative to the observer. However, materials exposed to the space environment have exhibited spectral changes including a darkening and a "reddening" of the spectra. This "reddening" is characterized by an increase in slope of the reflectance as the wavelength increases. Therefore, the model of pre-flight materials was augmented to include the presumed causative agent: space weathering effects. Remote data were collected on two of the six FORMOSAT satellites using the 1.6 meter telescope at the AMOS (Air Force Maui Optical and Supercomputing) site with the Spica spectrometer. Due to the separation in ascending node, observations were acquired of whichever one of the six satellites was visible on that specific night. Three nights of data were collected using the red (6000 - 9500 angstroms) filter and five nights of data were collected using the blue (3200 - 6600 angstroms) filter. A comparison of the data showed a good match to the pre-flight models for the blue filter region. The absorption feature near 5500 angstroms due to the copper colored Kapton multi-layer insulation (MLI) was very apparent in the remote samples and a good fit to the data was seen in all satellites observed. The features in the red filter regime agreed with the pre-flight model up through 7000 angstroms where the reddening begins and the slope of the remote sample increases. A comparison of the satellites showed similar features in the red and blue filter regions, i.e. the satellite surfaces were aging at the same rate. A comparison of the pre-flight model to the first month of remote measurements showed the amount by which the satellite had reddened. The second month of data observed a satellite at a higher altitude and was therefore, not compared to the first month. A third month of data was collected but of satellites at the lower altitude regime and can only be compared to the first month. One cause of the reddening that was ruled out in early papers was a possible calibration issue.

Abercromby, Kira Jorgensen↗

Response Classification Images in Vernier Acuity

Orientation selective and local sign mechanisms have been proposed as the basis for vernier acuity judgments. Linear image features contributing to discrimination can be determined for a two choice task by adding external noise to the images and then averaging the noises separately for the four types of stimulus/response trials. This method is applied to a vernier acuity task with different spatial separations to compare the predictions of the two theories. Three well-practiced observers were presented around 5000 trials of a vernier stimulus consisting of two dark horizontal lines (5 min by 0.3 min) within additive low-contrast white noise. Two spatial separations were tested, abutting and a 10 min horizontal separation. The task was to determine whether the target lines were aligned or vertically offset. The noises were averaged separately for the four stimulus/response trial types (e.g., stimulus = offset, response = aligned). The sum of the two 'not aligned' images was then subtracted from the sum of the 'aligned' images to obtain an overall image. Spatially smoothed images were quantized according to expected variability in the smoothed images to allow estimation of the statistical significance of image features. The response images from the 10 min separation condition are consistent with the local sign theory, having the appearance of two linear operators measuring vertical position with opposite sign. The images from the abutting stimulus have the same appearance with the two operators closer together. The image predicted by an oriented filter model is similar, but has its greatest weight in the abutting region, while the response images fall to nonsignificance there. The response correlation image method, previously demonstrated for letter discrimination, clarifies the features used in vernier acuity.

Ahumada, Albert J., Jr.↗

A case study of magnetotail current sheet disruption and diversion

On June 1, 1985 the AMPTE/CCE spacecraft (at a geocentric distance of about 8.8 earth radii at the midnight neutral sheet region) observed a dispersionless energetic particle injection and an increase in magnetic field magnitude, which are features commonly attributed to disruption of the near-earth cross-tail current sheet during substorm expansion onsets. An analysis based on high time-resolution measurements from the magnetometer and the energetic particle detector indicates that the current sheet disruption region exhibited localized (less than 1 earth radius) and transient (less than 1 min) particle intensity enhancements, accompanied by complex magnetic field changes with occasional development of a southward magnetic field component. Similar features are seen in other current disruption/diversion events observed by the CCE. The present analysis suggests that the current disruption region is quite turbulent, similar to laboratory experiments on current sheet disruption, with signatures unlike those expected from an X-type neutral line configuration. No clear indication of periodicity in any magnetic field parameter is discernible for this current disruption event.

Lui, A. T. Y.↗

Empirical models of the latitudinal variations of Te and Ne in the ionosphere at solar maximum

A global spectral model of electron temperature and density is developed in which only the latitudinal variations observed in narrow altitude and local time bands are used. The measurements for this purpose are obtained during intervals that are short as compared to a season. By suppressing all variables except latitude the model can use 17th-order polynomials and generates a latitudinal structure that is similar to that described by the observational data. The treatment is designed to correct for the eccentricity and slow evolution of the data-collection satellite orbit so that small-scale features can be resolved. By comparing the results of a global model and the present latitudinal model to observational measurements of electron temperature and density it is shown that auroral-zone and midlatitude trough structures are not resolved in latitudinal models. The observational data can be used to study the response of electron density and temperature to solar EUV flux variations and geomagnetic activity.

Brace, L. H.↗

Dissolvable Template Nanoimprint Lithography: A Facile and Versatile Nanoscale Replication Technique

Nanoimprinting lithography (NIL) is a next-generation nanofabrication method, capable of replicating nanostructures from original master surfaces. In this work, we develop highly scalable, simple, and nondestructive NIL using a dissolvable template. Termed dissolvable template nanoimprinting lithography (DT-NIL), our method utilizes an economic thermoplastic resin to fabricate nanoimprinting templates, which can be easily dissolved in simple organic solvents. Additionally, we used the DT-NIL method to replicate cicada wings which have surface nanofeatures of ~100 nm in height. The master, template, and replica surfaces showed a >~94% similarity based on the measured diameter and height of the nanofeatures. The versatility of DT-NIL was also demonstrated with the replication of re-entrant, multiscale, and hierarchical features on fly wings, as well as hard silicon wafer-based artificial nanostructures. The DT-NIL method can be performed under ambient conditions with inexpensive materials and equipment. Our work opens the door to opportunities for economical and high-throughput nanofabrication processes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Examination of 3013 Containers Baseline Surface Features

The Surveillance and Monitoring Program at Los Alamos National Laboratory (LANL) was tasked with evaluating the baseline features of 3013 containers. This baseline is to be used as a basis for comparison for 3013 containers that had been packaged with corrosive plutonium materials. The LANL team evaluated an unwelded container, an unused welded container, and a welded container that had held plutonium metal without any corrosive impurities. These three containers had features with depths no larger than 6 µm and had similar depth distributions. The features observed in the baseline containers were all shallower than those seen in containers packaged with corrosive plutonium materials. This work establishes workflows for feature identification and measurement, as well as establishment of baseline data for future comparison with corroded containers.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗