Search NASA⌕ Search

SEARCH · Search NASA

Results for “Field effect transistor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Power converter with co-packaged secondary field effect transistors (FETs)

A power converter with co-packaged secondary field effect transistors (FETs) are described. The power converter can include a first circuit, a transformer connected to an output of the first circuit, and a second circuit connected to an output of the transformer. The second circuit can include an inductor, a first FET coupled between the transformer and the inductor, and a second FET coupled between the first FET and ground. The first FET and the second FET can be co-packaged as a single package.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Detection of terahertz radiation by tightly concatenated InGaAs field-effect transistors integrated on a single chip

A tightly concatenated chain of InGaAs field-effect transistors with an asymmetric T-gate in each transistor demonstrates strong terahertz photovoltaic response without using supplementary antenna elements. We obtain the responsivity above 1000 V/W and up to 2000 V/W for unbiased and drain-biased transistors in the chain, respectively, with the noise equivalent power below 10{sup −11} W/Hz{sup 0.5} in the unbiased mode of the detector operation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Enhanced shot noise in carbon nanotube field-effect transistors

We predict shot noise enhancement in defect-free carbon nanotube field-effect transistors through a numerical investigation based on the self-consistent solution of the Poisson and Schroedinger equations within the nonequilibrium Green's functions formalism, and on a Monte Carlo approach to reproduce injection statistics. Noise enhancement is due to the correlation between trapping of holes from the drain into quasibound states in the channel and thermionic injection of electrons from the source, and can lead to an appreciable Fano factor of 1.22 at room temperature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Improvement of graphene field-effect transistors by hexamethyldisilazane surface treatment

We report the improvement of the electrical characteristics of graphene field-effect transistors (FETs) by hexamethyldisilazane (HMDS) treatment. Both electron and hole field-effect mobilities are increased by 1.5 × –2×, accompanied by effective residual carrier concentration reduction. Dirac point also moves closer to zero Volt. Time evolution of mobility data shows that mobility improvement saturates after a few hours of HMDS treatment. Temperature-dependent transport measurements show small mobility variation between 77 K and room temperature (295 K) before HMDS application. But mobility at 77 K is almost 2 times higher than mobility at 295 K after HMDS application, indicating reduced carrier scattering. Performance improvement is also observed for FETs made on hydrophobic substrate–an HMDS-graphene-HMDS sandwich structure. Raman spectroscopic analysis shows that G peak width is increased, G peak position is down shifted, and intensity ratio between 2D and G peaks is increased after HMDS application. We attribute the improvements in electronic transport mainly to enhanced screening and mitigation of adsorbed impurities from graphene surface upon HMDS treatment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Palladium nanoparticle decorated silicon nanowire field-effect transistor with side-gates for hydrogen gas detection

A silicon nanowire field-effect transistor (SiNW FET) with local side-gates and Pd surface decoration is demonstrated for hydrogen (H{sub 2}) detection. The SiNW FETs are fabricated by top-down method and functionalized with palladium nanoparticles (PdNPs) through electron beam evaporation for H{sub 2} detection. The drain current of the PdNP-decorated device reversibly responds to H{sub 2} at different concentrations. The local side-gates allow individual addressing of each sensor and enhance the sensitivity by adjusting the working region to the subthreshold regime. A control experiment using a non-functionalized device verifies that the hydrogen-sensitivity is originated from the PdNPs functionalized on the SiNW surface.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Delta-doped SrTiO 3 top-gated field effect transistor

Oxide heterostructures are an enticing platform for incorporation in field-effect transistors (FETs) due to their diverse physical properties which can be tuned by electrostatic gating. Here, we discuss a top-gated FET based on a SrTiO 3 delta-doped structure, which operates down to cryogenic temperatures. The device shows excellent DC characteristics with an on/off ratio greater than 10 4 and field effect mobility estimated to be 2125 cm 2 /V s at 2 K. The high field effect mobility was consistent with the Hall mobility and is attributed to the formation of a two-dimensional electron system in the delta-doped layer: two-dimensional gate-tunable Shubnikov-de Haas oscillations confirm this. The achievement of an electron density of 3 × 10 12 cm –2 in a gate-tunable geometry allows for the exploration of the interplay between magnetic, ferroelectric, and superconducting properties of SrTiO 3 in the quantum limit.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Graphene Field Effect Transistor for Radiation Detection

The present invention relates to a graphene field effect transistor-based radiation sensor for use in a variety of radiation detection applications, including manned spaceflight missions. The sensing mechanism of the radiation sensor is based on the high sensitivity of graphene in the local change of electric field that can result from the interaction of ionizing radiation with a gated undoped silicon absorber serving as the supporting substrate in the graphene field effect transistor. The radiation sensor has low power and high sensitivity, a flexible structure, and a wide temperature range, and can be used in a variety of applications, particularly in space missions for human exploration.

Li, Mary J.↗

InGaP/InGaAs doped-channel direct-coupled field-effect transistors logic with low supply voltage

InGaP/InGaAs doped-channel direct-coupled field-effect transistor logic (DCFL) with relatively low supple voltage is demonstrated by two-dimensional analysis. In the integrated enhancement/depletion-mode transistors, subband and two-dimensional electron gas (2DEG) are formed in the InGaAs strain channels, which substantially increase the channel concentration and decrease the drain-to-source saturation voltage. The integrated devices show high turn-on voltage, high transconductance, broad gate voltage swing, and excellent high frequency performance, simultaneously. Furthermore, the integrated devices exhibit large noise margins for DCFL application with low supply voltage of 1.5 V attributed from the relatively small saturation voltages of the studied integrated devices.

36 MATERIALS SCIENCE↗

Utilizing self-assembled-monolayer-based gate dielectrics to fabricate molybdenum disulfide field-effect transistors

In this study, we apply self-assembled-monolayer (SAM)-based gate dielectrics to the fabrication of molybdenum disulfide (MoS{sub 2}) field-effect transistors. A simple fabrication process involving the selective formation of a SAM on metal oxides in conjunction with the dry transfer of MoS{sub 2} flakes was established. A subthreshold slope (SS) of 69 mV/dec and no hysteresis were demonstrated with the ultrathin SAM-based gate dielectrics accompanied by a low gate leakage current. The small SS and no hysteresis indicate the superior interfacial properties of the MoS{sub 2}/SAM structure. Cross-sectional transmission electron microscopy revealed a sharp and abrupt interface of the MoS{sub 2}/SAM structure. The SAM-based gate dielectrics are found to be applicable to the fabrication of low-voltage MoS{sub 2} field-effect transistors and can also be extended to various layered semiconductor materials. This study opens up intriguing possibilities of SAM-based gate dielectrics in functional electronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhanced memory characteristics in organic ferroelectric field-effect transistors through thermal annealing

We report on the memory characteristics of organic ferroelectric field-effect transistors (FeFETs) using spin-coated poly(vinylidene difluoride/trifluoroethylene) (P(VDF/TrFE)) as a gate insulating layer. By thermal annealing the P(VDF/TrFE) layer at temperatures above its melting point, we could significantly improve the on/off current ratio to over 10{sup 4}. Considerable changes in the surface morphology and x-ray diffraction patterns were also observed in the P(VDF/TrFE) layer as a result of the annealing process. The enhanced memory effect is attributed to large polarization effects caused by rearranged ferroelectric polymer chains and improved crystallinity in the organic semiconductor layer of the FeFET devices.

36 MATERIALS SCIENCE↗

Reduction in the interface-states density of metal-oxide-semiconductor field-effect transistors fabricated on high-index Si (114) surfaces by using an external magnetic field

After fabrication of Metal-Oxide-Semiconductor Field-Effect Transistor (MOSFET) devices on high-index silicon (114) surfaces, their threshold voltage (Vth) and interface-states density (Dit) characteristics were measured under the influence of an externally applied magnetic field of B = 6 μT at room temperature. The electron flow of the MOSFET's channel presents high anisotropy on Si (114), and this effect is enhanced by using an external magnetic field B, applied parallel to the Si (114) surface but perpendicular to the electron flow direction. This special configuration results in the channel electrons experiencing a Lorentzian force which pushes the electrons closer to the Si (114)-SiO{sub 2} interface and therefore to the special morphology of the Si (114) surface. Interestingly, Dit evaluation of n-type MOSFETs fabricated on Si (114) surfaces shows that the Si (114)-SiO{sub 2} interface is of high quality so that Dit as low as ∼10{sup 10 }cm{sup −2}·eV{sup −1} are obtained for MOSFETs with channels aligned at specific orientations. Additionally, using both a small positive Vds ≤ 100 mV and B = 6 μT, the former Dit is reduced by 35% in MOSFETs whose channels are aligned parallel to row-like nanostructures formed atop Si (114) surfaces (channels having a 90° rotation), whereas Dit is increased by 25% in MOSFETs whose channels are aligned perpendicular to these nanostructures (channels having a 0° rotation). From these results, the special morphology of a high-index Si (114) plane having nanochannels on its surface opens the possibility to reduce the electron-trapping characteristics of MOSFET devices having deep-submicron features and operating at very high frequencies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characterization of AlGaN/GaN Heterostructure Field Effect Transistors (HFETs) with Variable Thickness Channel and Substrate Type

In this study, AlGaN/GaN-based heterostructure field effect transistor (HFET) was simulated by using ISE TCAD software. The effects of varying thickness, substrate type and doping channel levels were investigated. The device output characteristics of drain current and voltage with various gate biases were presented. A maximum drain current and extrinsic transconductance were achieved with AlGaN HFET grown on AlN/SiC substrate. The device performance can be improved by optimizing the substrate type and heavily doped channel layer which will reduce the contact resistance and enhance the transconductance. All results are comparable with the experimental results obtained by other researchers.

36 MATERIALS SCIENCE↗

Encapsulated gate-all-around InAs nanowire field-effect transistors

We report the fabrication of lateral gate-all-around InAs nanowire field-effect transistors whose gate overlaps the source and drain electrodes and thus fully encapsulates the nanowire channel. They feature large drive current and transconductance that surpass those of conventional non-gate-overlap devices. The improved device characteristics can be attributed to the elimination of access resistance associated with ungated segments between the gate and source/drain electrodes. Our data also reveal a correlation between the normalized transconductance and the threshold voltage, which points to a beneficial effect of our wet-etching procedure performed prior to the atomic-layer-deposition of the gate dielectric.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Low-frequency noise in MoSe{sub 2} field effect transistors

One of the important performance metrics of emerging nanoelectronic devices, including low dimensional Field Effect Transistors (FETs), is the magnitude of the low-frequency noise. Atomically thin 2D semiconductor channel materials such as MoX{sub 2} (X ≡ S, Se) have shown promising transistor characteristics such as I{sub ON}/I{sub OFF} ratio exceeding 10{sup 6} and low I{sub OFF}, making them attractive as channel materials for next generation nanoelectronic devices. However, MoS{sub 2} FETs demonstrated to date exhibit high noise levels under ambient conditions. In this letter, we report at least two orders of magnitude smaller values of Hooge parameter in a back-gated MoSe{sub 2} FET (10 atomic layers) with nickel S/D contacts and measured at atmospheric pressure and temperature. The channel dominated regime of noise was extracted from the total noise spectrum and is shown to follow a mobility fluctuation model with 1/f dependence. The low noise in MoSe{sub 2} FETs is comparable to other 1D nanoelectronic devices such as carbon nanotube FETs (CNT-FETs) and paves the way for use in future applications in precision sensing and communications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tensile strained Ge tunnel field-effect transistors: k · p material modeling and numerical device simulation

Group IV based tunnel field-effect transistors generally show lower on-current than III-V based devices because of the weaker phonon-assisted tunneling transitions in the group IV indirect bandgap materials. Direct tunneling in Ge, however, can be enhanced by strain engineering. In this work, we use a 30-band k · p method to calculate the band structure of biaxial tensile strained Ge and then extract the bandgaps and effective masses at Γ and L symmetry points in k-space, from which the parameters for the direct and indirect band-to-band tunneling (BTBT) models are determined. While transitions from the heavy and light hole valence bands to the conduction band edge at the L point are always bridged by phonon scattering, we highlight a new finding that only the light-hole-like valence band is strongly coupling to the conduction band at the Γ point even in the presence of strain based on the 30-band k · p analysis. By utilizing a Technology Computer Aided Design simulator equipped with the calculated band-to-band tunneling BTBT models, the electrical characteristics of tensile strained Ge point and line tunneling devices are self-consistently computed considering multiple dynamic nonlocal tunnel paths. The influence of field-induced quantum confinement on the tunneling onset is included. Our simulation predicts that an on-current up to 160 (260) μA/μm can be achieved along with on/off ratio > 10{sup 6} for V{sub DD} = 0.5 V by the n-type (p-type) line tunneling device made of 2.5% biaxial tensile strained Ge.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical characterization of multilayer HfSe{sub 2} field-effect transistors on SiO{sub 2} substrate

We fabricated and characterized two-dimensional field-effect transistors (FETs) based on hafnium diselenide (HfSe{sub 2}) crystalline nanoflakes. The HfSe{sub 2} FET exhibits an n-type semiconductor behavior with a high on/off current ratio exceeding 7.5 × 10{sup 6}. In the temperature range of 120 K–280 K, the thermally activated transport is observed at high carrier concentrations, while at low concentrations and low temperatures hopping conduction dominates the transport mechanism. We also observed the metal insulator transition at carrier density of ∼1.8 × 10{sup 12 }cm{sup −2}. This initial report on the physical and electrical characterization of two dimensional HfSe{sub 2} material demonstrates the feasibility of this semiconducting material for electronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Advanced performance and scalability of Si nanowire field-effect transistors analyzed using noise spectroscopy and gamma radiation techniques

High-quality Si nanowire field effect transistors (FETs) were fabricated using thermal nanoimprint and chemical wet etching technologies. FET structures of different lengths demonstrate high carrier mobility with values of about 750 cm{sup 2}/Vs and low volume densities of active traps in the dielectric layers of 5 × 10{sup 17} cm{sup −3} eV{sup −1}. We investigated the transport properties of these n-type channel structures using low-frequency noise spectroscopy before and after gamma radiation treatment. Before gamma irradiation, FET structures with lengths of less than 4 μm exhibited noise from contact regions with 1/(L{sup 2}) dependence for the relative 1/f noise. After gamma radiation, the spectra reflected the priority of channel noise with 1/L dependence for all samples. The transport characteristics show that the fabricated nanowire FETs improved scalability, decreased parameter scattering, and increased stability after treatment. The results demonstrate that these nanowire FETs are promising for nanoelectronic and biosensor applications due to the cost-efficient technology and advanced performance of FETs with improved stability and reliability.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Gate-Controlled Metal–Insulator Transition in TiS 3 Nanowire Field-Effect Transistors

We explore the electrical characteristics of TiS 3 nanowire field-effect transistor (FETs), over the wide temperature range from 3 to 350 K. These nanomaterials have a quasi-one-dimensional (1D) crystal structure and exhibit a gate-controlled metal–insulator transition (MIT) in their transfer curves. Their room-temperature mobility is ~20–30 cm 2 /(V s), 2 orders of magnitude smaller than predicted previously, a result that we explain quantitatively in terms of the influence of polar-optical phonon scattering in these materials. In the insulating state (<~220 K), the transfer curves exhibit unusual mesoscopic fluctuations and a current suppression near zero bias that is common to charge-density wave (CDW) systems. The fluctuations have a nonmonotonic temperature dependence and wash out at a temperature close to that of the bulk MIT, suggesting they may be a feature of quantum interference in the CDW state. Overall, our results demonstrate that quasi-1D TiS 3 nanostructures represent a viable candidate for FET realization and that their functionality is influenced by complex phenomena.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗