Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fourth-order”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Numerical experiments related to the summer 1980 U.S. heat wave

The NASA Goddard Laboratory for Atmospheres fourth-order GCM was used in a series of medium-range numerical forecast experiments in order to improve understanding of the severe summer 1980 heat wave over the U.S. The results show that the derived soil moisture anomalies in the summer of 1980 contributed positively to the model's simulation of the heat wave maintenance, and suggest that once a region of reduced soil moisture is established, it tends to persist and maintain warmer and drier conditions. The lower soil moisture values resulted in reduced evaporation, higher ground temperatures, increased sensible heat flux from ground to air, higher surface air temperature, lower sea-level pressure, and higher 500-mb height. The effects of North Pacific sea-surface-temperature anomalies were mostly opposite to those of the soil-moisture anomalies: enhanced northerly flow of cooler drier air, increased evaporation, lower ground and air temperature, higher sea level pressure, and lower 500 mb heights over the Great Plains.

Wolfson, N.↗

Numerical methods for one-dimensional reaction-diffusion equations arising in combustion theory

A review of numerical methods for one-dimensional reaction-diffusion equations arising in combustion theory is presented. The methods reviewed include explicit, implicit, quasi-linearization, time linearization, operator-splitting, random walk and finite-element techniques and methods of lines. Adaptive and nonadaptive procedures are also reviewed. These techniques are applied first to solve two model problems which have exact traveling wave solutions with which the numerical results can be compared. This comparison is performed in terms of both the wave profile and computed wave speed. It is shown that the computed wave speed is not a good indicator of the accuracy of a particular method. A fourth-order time-linearized, Hermitian compact operator technique is found to be the most accurate method for a variety of time and space sizes.

Ramos, J. I.↗

Jet stream velocity errors in general circulation models

The longitude and time dependence of excessive wind speed errors above subtropical jets in current GCM forecasts is studied for 14 five-day winter forecasts using the NASA Goddard Laboratory for Atmospheres fourth-order GCM. Several distinct phenomena, which may be divided into four categories, are found to contribute to the excess winds. These categories are: (1) error growth above the jet near the Himalayas; (2) error growth above the jet initiated elsewhere followed by advection; (3) tropical moisture bursts appearing in equatorial regions and migrating northeastward to merge with and distort the jet; and (4) undulatory growth of waves in the meridional component of the jet stream velocity. The results of additional sensitivity studies of the Himalayan region error are also reported.

Tenenbaum, J.↗

The effect of a gravity wave drag parameterization scheme on GLA fourth order GCM forecasts

Ten-day forecast experiments have been performed to determined whether the introduction of a simple orographic gravity wave drag scheme into a fourth-order GCM would reduce the climate drift of the fine resolution model and improve the model's medium range predictive skill. Error reduction due to the gravity waves is found in stratospheric predictions, where the improvement is confined mainly to the zonal mean component. Improvements are noted in the Northern Hemisphere climatology, where low level westerlies are weakened and shifted poleward, and in the Southern Hemisphere, where the roaring forties and fifties are better simulated.

Helfand, H. M.↗

The effects of finite rate chemical processes on high enthalpy nozzle performance - A comparison between SPARK and SEAGULL

The generalized chemistry version of the computer code SPARK is extended to include two higher-order numerical schemes, yielding fourth-order spatial accuracy for the inviscid terms. The new and old formulations are used to study the influences of finite rate chemical processes on nozzle performance. A determination is made of the computationally optimum reaction scheme for use in high-enthalpy nozzles. Finite rate calculations are compared with the frozen and equilibrium limits to assess the validity of each formulation. In addition, the finite rate SPARK results are compared with the constant ratio of specific heats (gamma) SEAGULL code, to determine its accuracy in variable gamma flow situations. Finally, the higher-order SPARK code is used to calculate nozzle flows having species stratification. Flame quenching occurs at low nozzle pressures, while for high pressures, significant burning continues in the nozzle.

Carpenter, M. H.↗

Structure of rough-wall turbulent boundary layers

Recent experiments have shown that, in rough-wall turbulent boundary layers, drag varies systematically with the spanwise aspect ratio lambda(z) (span/height) of roughness elements. In this paper, the effect of lambda(z) on turbulence structure has been examined. Based on lambda(z), the roughness in a transversely grooved surface with lambda(z) much greater than 1 is the opposite extreme of model plant canopies with lambda(z) much less than 1, studied in wind tunnels, whereas sandgrain is an intermediate type. Second-, third-, and fourth-order turbulence moments have been measured in turbulent boundary layers over transversely grooved and smooth surfaces and compared with available turbulence structure measurements over other types of surfaces. The near-wall turbulence structure is found to vary with lambda(z). The instantaneous motions involved in the flux of shear stress near the wall in smooth and transversely grooved surfaces are opposite in sign to those in three-dimensional roughness. The former is explained in terms of hairpin vortices alone, while the latter group is modeled to have an additional vortex (the so-called necklace vortex which straddles a three-dimensional roughness element near its base).

Bandyopadhyay, Promode R.↗

Unsteady delta-wing flow computation using an implicit factored Euler scheme

The conservative unsteady Euler equations for the flow relative motion in the moving frame of reference are used to solve for the steady and unsteady flows around sharp-edged delta wings. The resulting equations are solved by using an implicit approximately-factored finite-volume scheme. Implicit second-order and explicit second- and fourth-order dissipations are added to the scheme. The boundary conditions are explicitly satisfied. The grid is generated by locally using a modified Joukowski transformation in cross-flow planes at the grid chord stations. The computational applications cover a steady flow around a delta wing whose results serve as the initial conditions for the unsteady flow around a pitching delta wing about a large angle of attack. The steady results are compared with the experimental data and the periodic solution is achieved within the third cycle of oscillation.

Kandil, Osama A.↗

Goertler vortices in supersonic boundary layers

The problem of Goertler vortices in compressible boundary layers over concave walls is studied by solving parabolic partial differential equations. The numerical scheme used is based upon a fourth-order accurate compact difference scheme. The results show that both the velocity and temperature fluctuations may lead to a Goertler vortex. The vortex growth rates determined from the present method are found to differ somewhat from those given by normal mode solution. The effects of cooling, heating and pressure gradient are also studied. At a Mach number of 3.5, cooling has a small destabilizing effect. The effect of adverse pressure gradient is also found to be destabilizing on a Mach 8 boundary layer.

Spall, R. E.↗

SIRTF controller simulation - Instability masked by numerical integration

In the course of a simulation study of a candidate design for the Space Infrared Telescope Facility (SIRTF), an unusual phenomenon was observed. The uncompensated control system was unstable, but a numerical simulation with the fixed-step-size classical fourth-order Runge-Kutta method gave a stable response. This phenomenon is described in the setting in which it occurred. The Runge-Kutta simulation model is analyzed as a discrete linear system and shown to be stable, thus corroborating the numerical results.

Rajan, N.↗

Analytical approach to peel stresses in bonded composite stiffened panels

A closed-form solution was obtained for the stresses and displacements of two bonded beams. A system of two fourth-order and two second-order differential equations with the associated boundary equations was determined using a variational work approach. A FORTRAN computer program was devised to solve for the eigenvalues and eigenvectors of this system and to calculate the coefficients from the boundary conditions. The results were then compared with NASTRAN finite-element solutions and shown to agree closely.

Barkey, Derek A.↗

Stability of a rigid rotor supported on oil-film journal bearings under dynamic load

Most published work relating to dynamically loaded journal bearings are directed to determining the minimum film thickness from the predicted journal trajectories. These do not give any information about the subsynchronous whirl stability of journal bearing systems since they do not consider the equations of motion. It is, however, necessary to know whether the bearing system operation is stable or not under such an operating condition. The stability characteristics of the system are analyzed. A linearized perturbation theory about the equilibrium point can predict the threshold of stability; however it does not indicate postwhirl orbit detail. The linearized method may indicate that a bearing is unstable for a given operating condition whereas the nonlinear analysis may indicate that it forms a stable limit cycle. For this reason, a nonlinear transient analysis of a rigid rotor supported on oil journal bearings under: (1) a unidirectional constant load, (2) a unidirectional periodic load, and (3) variable rotating load are performed. The hydrodynamic forces are calculated after solving the time-dependent Reynolds equation by a finite difference method with a successive overrelaxation scheme. Using these forces, equations of motion are solved by the fourth-order Runge-Kutta method to predict the transient behavior of the rotor. With the aid of a high-speed digital computer and graphics, the journal trajectories are obtained for several different operating conditions.

Majumdar, B. C.↗

Unsteady transonic airfoil computation using implicit Euler scheme on body-fixed grid

The unsteady Euler equations have been derived for the flow relative motion with respect to a frame of reference that is rigidly attached to the moving airfoil. The grid is generated once by an elliptic solver without a need for dynamic grid computation. An implicit factored finite-volume scheme has been developed and implemented through a fully vectorized computer program. Implicit second-order and explicit second and fourth-order dissipations are added to the scheme. The boundary conditions are explicitly satisfied. The scheme is applied to steady and unsteady transonic airfoil flows and the results are in good agreement with the experimental data. For forced harmonic airfoil motions, periodic solutions are achieved within the third cycle of oscillation.

Kandil, Osama A.↗

Global precipitation derived from HIRS2/MSU soundings

Atmospheric and surface soundings for the FGGE obtained by the analysis of HIRS2/MSU sounding data (Susskind et al., 1987) were used, along with a modified version of the radiation code used in the Goddard Laboratory for Atmospheres fourth-order GCM, to compute fields of total outgoing longwave radiation (OLR) for the FGGE year. A reasonable agreement was obtained between the computed OLR values and OLR radiation derived from measurements. Coefficients relating the global difference fields for each month of the FGGE year to precipitation derived from rain-gauge measurements for the FGGE year were derived. The results of this study demonstrate that precipitation is derivable from space on a global scale.

Wu, Man-Li C.↗

Assessment of recent resolution and parameterization changes in the GLA fourth order GCM

The Goddard Laboratory for Atmospheres' fourth-order GCM is under evaluation for the impact on model integrations of enhanced horizontal and vertical resolution, as well as the effects of such novel parameterization schemes as that of gravity-wave-drag, the Arakawa-Schubert (1974) cumulus parameterization, and an explicitly-resolved planetary boundary layer. While the doubling of the GMC's horizontal resolution to 2 deg in latitude and 2.5 deg in longitude has improved the model's predictive skill for 6-7 day forecasts, systematic errors associated with the model's climate drift lead to a deterioration in predictions for longer forecasts.

Helfand, H. M.↗

Numerical prediction experiments related to the summer 1980 U.S. heat wave

The GLA (Goddard Laboratory for Atmosphere) fourth-order model predictions of the summer 1980 heat wave are examined to assess the skill of the model in numerically forecasting the initiation of the heat wave and the sensitivity of the model predictions to initial conditions and boundary forcing. Results of experiments indicate that the model predictions are sensitive to the initial conditions. The sensitivity of the model to anomalous boundary forcing is found to be generally larger than its sensitivity to initial conditions at extended ranges. The results of the study suggest that models may be useful in forecasting similar events if adequate determinations of the evolving boundary forcing can be made in real time.

Atlas, R.↗

Integrating Matrix Method for Determining the Natural Vibrations of a Rotating, Unsymmetrical Beam with Application to Twisted Propeller Blades

A numerical method is Presented for determining the natural vibration frequencies, and the corresponding mode shapes, of a rotating cantilever beam which has a nonuniform, unsymmetrical cross section. Two coupled fourth-order differential equations of motion with variable coefficients are derived which govern the motion of such a beam having deformations in two directions. Through the development and utilization of the integrating matrix, the solution of the differential equations is obtained in the form of an eigenvalue problem. The solutions to the eigenvalue problem are determined by an iteration method based upon a special orthogonality relationship which is derived. Numerical examples, including an application to a twisted propeller blade, are presented with the results of the integrating matrix solutions being compared to exact solutions and experimental data.

Hunter, William F.↗

A Diagonal Algorithm for the Method of Pseudocompressibility

The method of pseudocompressibility has been found to be an efficient method for obtaining a steady-state solution to the incompressible Navier-Stokes equations. Recent improvements to this method include the use of a diagonal scheme for the inversion of the equations equations at each iteration. The necessary transformations have been derived for the pseudocompressibility equations in generalized coordinates. The diagonal algorithm reduces the computing time necessary to obtain a steady-state solution by a factor of nearly three. Implicit viscous terms are maintained in the equations, and it has become possible to use fourth-order implicit dissipation. The steady-state solution is unchanged by the approximations resulting from the diagonalization of the equations. Computed results for flow over a two-dimensional backward-facing step and a three-dimensional cylinder mounted normal to a flat plate are presented for both the old and new algorithms. The computing efficiency of these algorithms are compared. Identical solutions are obtained from both algorithms which compare well with experimental results.

Rogers, Stuart E.↗

Higher-order space-charge stability in anisotropic beams: Vlasov-Poisson derivation, refined dispersion relations, and stability charts

The Hofmann stability chart is used to screen working points in space-charge-dominated linacs. We identify two errors in its published higher-order dispersion relations: missing $(1\mp2\hatη^2/α)$ factors in the third-order $S^4$ coupling residues, and a sign error in the stated isotropic reduction of the fourth-order relation. Both corrections follow from Hofmann's Vlasov-Poisson equations without fitted parameters. They reproduce coherent tune-shift coefficients in the author's later monograph that the printed forms miss by 24% and 127%. Mode-resolved figures from a published application agree with the corrected relations and reject the printed forms, indicating an inconsistency between the 1998 equations and the calculations underlying those tested figures. We quantify the effect on the non-oscillatory stability chart. Inside the adopted $S^2\le10$ comparison domain, printed and corrected forms disagree on 0.73-2.11% of cells, with no preferred direction. Among excluded cells, disagreement reaches 22%, and the printed relation over-predicts instability at every sampled anisotropy. This concentration may help explain why the errors persisted, although it does not establish their historical cause. For PIP-II, the corrected chart flags four of thirty-two evaluable periods, including one on a third-order odd branch missed by a second-order screen. This count covers non-oscillatory modes only and remains conditional on an unresolved factor-five disagreement between two codes on transverse emittance growth.

Pathak, Abhishek [Fermilab] (ORCID:000000021704208↗