Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fractional derivative”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Composition and Plume Gas Interaction Control Iron Fractional Solubility More Than Particle Size in Volcanic Ash: Implications for Fertilization of the North Atlantic

Deposition of volcanic ash is thought to impact marine biogeochemical cycling by adding soluble iron (Fe) to the surface ocean. The magnitude of this input is a function of the amount of ash deposited, the total Fe content in the ash, and ash‐derived Fe's fractional solubility. However, the relative importance of chemical composition, acidic processing by the volcanic plume, and ash particle size in determining solubility is unclear. We paired an aerosol leach meant to provide an upper limit for fractional Fe solubility with chemical analyses of ash from the Cumbre Vieja (CV) and La Soufrière eruptions, which both impacted the North Atlantic in 2021. Fe in the ash samples is <6% soluble, but Fe fractional solubility in CV ash is approximately triple that of La Soufrière ash. Compared to La Soufrière, a larger proportion of the Fe in CV ash is in silicate rather than oxide minerals, which release more soluble Fe. Elevated levels of surficial fluorine (F) also suggest that CV ash was subjected to a more fluorine‐rich eruption plume and underwent more acidic processing. Particle size does not appear to be a primary control on Fe release. We estimate that the CV eruption had a much larger impact on dissolved Fe (DFe) concentration in the surface ocean than the La Soufrière eruption because of differences in soluble Fe content and particle deposition velocity. These differences may help explain why some eruptions elicit a biological response in the ocean while others do not.

Elliott, Hope E. [Univ. of Miami, FL (United State↗
NASA NTRS2005

Accuracy of Geophysical Parameters Derived from AIRS/AMSU as a Function of Fractional Cloud Cover

AIRS was launched on EOS Aqua on May 4,2002, together with AMSU A and HSB, to form a next generation polar orbiting infrared and microwave atmospheric sounding system. The primary products of AIRS/AMSU are twice daily global fields of atmospheric temperature-humidity profiles, ozone profiles, sea/land surface skin temperature, and cloud related parameters including OLR. The sounding goals of AIRS are to produce 1 km tropospheric layer mean temperatures with an rms error of 1K, and layer precipitable water with an rms error of 20%, in cases with up to 80% effective cloud cover. The basic theory used to analyze AIRS/AMSU/HSB data in the presence of clouds, called the at-launch algorithm, was described previously. Pre-launch simulation studies using this algorithm indicated that these results should be achievable. Some modifications have been made to the at-launch retrieval algorithm as described in this paper. Sample fields of parameters retrieved from AIRS/AMSU/HSB data are presented and validated as a function of retrieved fractional cloud cover. As in simulation, the degradation of retrieval accuracy with increasing cloud cover is small. HSB failed in February 2005, and consequently HSB channel radiances are not used in the results shown in this paper. The AIRS/AMSU retrieval algorithm described in this paper, called Version 4, become operational at the Goddard DAAC in April 2005 and is being used to analyze near-real time AIRS/AMSU data. Historical AIRS/AMSU data, going backwards from March 2005 through September 2002, is also being analyzed by the DAAC using the Version 4 algorithm.

Susskind, Joel↗
NASA NTRS2006

Accuracy of Geophysical Parameters Derived from AIRS/AMSU as a Function of Fractional Cloud Cover

AIRS was launched on EOS Aqua on May 4,2002, together with AMSU A and HSB, to form a next generation polar orbiting infrared and microwave atmospheric sounding system. The primary products of AIRS/AMSU are twice daily global fields of atmospheric temperature-humidity profiles, ozone profiles, sea/land surface skin temperature, and cloud related parameters including OLR. The sounding goals of AIRS are to produce 1 km tropospheric layer mean temperatures with an rms error of lK, and layer precipitable water with an rms error of 20 percent, in cases with up to 80 percent effective cloud cover. The basic theory used to analyze Atmospheric InfraRed Sounder/Advanced Microwave Sounding Unit/Humidity Sounder Brazil (AIRS/AMSU/HSB) data in the presence of clouds, called the at-launch algorithm, was described previously. Pre-launch simulation studies using this algorithm indicated that these results should be achievable. Some modifications have been made to the at-launch retrieval algorithm as described in this paper. Sample fields of parameters retrieved from AIRS/AMSU/HSB data are presented and validated as a function of retrieved fractional cloud cover. As in simulation, the degradation of retrieval accuracy with increasing cloud cover is small and the RMS accuracy of lower tropospheric temperature retrieved with 80 percent cloud cover is about 0.5 K poorer than for clear cases. HSB failed in February 2003, and consequently HSB channel radiances are not used in the results shown in this paper. The AIRS/AMSU retrieval algorithm described in this paper, called Version 4, become operational at the Goddard DAAC (Distributed Active Archive Center) in April 2003 and is being used to analyze near-real time AIRS/AMSU data. Historical AIRS/AMSU data, going backwards from March 2005 through September 2002, is also being analyzed by the DAAC using the Version 4 algorithm.

Susskind, Joel↗
NASA NTRS1998

New Molecular Species In Comet C/1995 (Hale-Bopp) Observed with the Caltech Submillimeter Observatory

We present millimeter-wave observations of HNCO, HC3N, SO, NH2CHO, H(13)CN, and H3O(+) in comet C/1995 O1 (Hale-Bopp) obtained in February-April, 1997 with the Caltech Submillimeter Observatory (CSO). HNCO, first detected at the CSO in comet C/1996 B2 (Hyakutake), is securely confirmed in comet Hale-Bopp via observations of three rotational transitions. The derived abundance with respect to H2O is (4-13) x 10(exp -4). HC3N, SO, and NH2CHO are detected for the first time in a comet. The fractional abundance of HC3N based on observations of three rotational lines is (1.9 +/- 0.2) x 10(exp -4). Four transitions of SO are detected and the derived fractional abundance, (2-8) x 10(exp -3), is higher than the upper limits derived from UV observations of previous comets. Observations of NH2CHO imply a fractional abundance of (1-8) x 10(exp -4). H3O(+) is detected for the first time from the ground. The H(13)CN (3-2) transition is also detected and the derived HCN/H(13)CN abundance ratio is 90 +/- 15, consistent with the terrestrial C-13/C-12 ratio. in addition, a number of other molecular species are detected, including HNC, OCS, HCO(+), CO(+), and CN (the last two are first detections in a comet at radio wavelengths).

Lis, D. C.↗
DOE OSTI2024

Sum-of-Fractions Methodology for Actinides in Water- and Polyethylene-Moderated and -Reflected Systems

Sum-of-fractions is a method intended to make sure a subcritical margin for aqueous solutions and slurries of fissionable isotopes exists. The method indicates that a system is subcritical if the sum of the ratios of the mass of each isotope (in a mixture) to its individual minimum subcritical mass limit is less than or equal to one. Historically, the basis of the sum-of-fractions has been derived from allowances given in the American National Standards Institute (ANSI)/ American Nuclear Society (ANS)-8.15-1981. However, the allowance was removed in ANSI/ANS-8.15-2014 due to a lack of technical basis. A methodology was developed to assess the validity of using the sum-of-fractions for water- or polyethylene-moderated systems for the following nuclides: 232 U, 233 U, 234 U, 235 U, 237 Np, 236 Pu, 238 Pu, 239 Pu, 240 Pu, 241 Pu, 242 Pu, 241 Am, 242 m Am, 243 Am, 242 Cm, 243 Cm, 244 Cm, 245 Cm, 246 Cm, 247 Cm, 249 Cf, and 251 Cf. The methodology uses available benchmark data for mixtures of 233 U, 235 U, and 239 Pu to establish the calculational margin, and a mass limit reduction to establish the margin of subcriticality. Water- or polyethylene-moderated and -reflected mixtures containing the nuclides are evaluated with the code system, SCALE 6.2.4. Including the calculational margin, subcritical mass limits for each nuclide were computed for optimally water- or polyethylene-moderated and fully reflected systems. These masses were used to create nuclide mixtures in which the sum of the mass to subcritical mass limit ratios is one. The various nuclide mixtures were modeled over a range of moderation and demonstrate the keff does not exceed the calculational margin. For additional assurance of subcriticality, a significant mass reduction is applied to each computed minimum critical mass of the nuclides without adequate benchmark data consistent with the method in ANSI/ANS-8.15-2014.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2024

Sum-of-Fractions Method

Sum-of-fractions is a method intended to make sure a subcritical margin for aqueous solutions and slurries of fissionable isotopes exists. The method indicates that a system is subcritical if the sum of the ratios of the mass of each isotope (in a mixture) to its individual minimum subcritical mass limit is less than or equal to one. Historically, the basis of the sum-of-fractions has been derived from allowances given in the American National Standards Institute (ANSI)/ American Nuclear Society (ANS)-8.15-1981. However, the allowance was removed in ANSI/ANS-8.15-2014 due to a lack of technical basis. A methodology was developed to assess the validity of using the sum-of-fractions for water- or polyethylene-moderated systems for the following nuclides: 232U, 233U, 234U, 235U, 237Np, 236Pu, 238Pu, 239Pu, 240Pu, 241Pu, 242Pu, 241Am, 242mAm, 243Am, 242Cm, 243Cm, 244Cm, 245Cm, 246Cm, 247Cm, 249Cf, and 251Cf. The methodology uses available benchmark data for mixtures of 233U, 235U, and 239Pu to establish the calculational margin, and a mass limit reduction to establish the margin of subcriticality. Water- or polyethylene-moderated and -reflected mixtures containing the nuclides are evaluated with the code system, SCALE 6.2.4. Including the calculational margin, subcritical mass limits for each nuclide were computed for optimally water- or polyethylene-moderated and fully reflected systems. These masses were used to create nuclide mixtures in which the sum of the mass to subcritical mass limit ratios is one. The various nuclide mixtures were modeled over a range of moderation and demonstrate the keff does not exceed the calculational margin. For additional assurance of subcriticality, a significant mass reduction is applied to each computed minimum critical mass of the nuclides without adequate benchmark data consistent with the method in ANSI/ANS-8.15-2014.

criticality safety, Actinide↗
DOE OSTI2023

Development of genetic tools for heterologous protein expression in a pentose‐utilizing environmental isolate of Pseudomonas putida

Abstract Pseudomonas putida has emerged as a promising host for the conversion of biomass‐derived sugars and aromatic intermediates into commercially relevant biofuels and bioproducts. Most of the strain development studies previously published have focused on P. putida KT2440, which has been engineered to produce a variety of non‐native bioproducts. However, P. putida is not capable of metabolizing pentose sugars, which can constitute up to 25% of biomass hydrolysates. Related P. putida isolates that metabolize a larger fraction of biomass‐derived carbon may be attractive as complementary hosts to P. putida KT2440. Here we describe genetic tool development for P. putida M2, a soil isolate that can metabolize pentose sugars. The functionality of five inducible promoter systems and 12 ribosome binding sites was assessed to regulate gene expression. The utility of these expression systems was confirmed by the production of indigoidine from C6 and C5 sugars. Chromosomal integration and expression of non‐native genes was achieved by using chassis‐independent recombinase‐assisted genome engineering (CRAGE) for single‐step gene integration of biosynthetic pathways directly into the genome of P. putida M2. These genetic tools provide a foundation to develop hosts complementary to P. putida KT2440 and expand the ability of this versatile microbial group to convert biomass to bioproducts.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Formation and fate of freshwater on an ice floe in the Central Arctic

The melt of snow and sea ice during the Arctic summer is a significant source of relatively fresh meltwater. The fate of this freshwater, whether in surface melt ponds or thin layers underneath the ice and in leads, impacts atmosphere–ice–ocean interactions and their subsequent coupled evolution. Here, we combine analyses of datasets from the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition (June–July 2020) for a process study on the formation and fate of sea ice freshwater on ice floes in the Central Arctic. Our freshwater budget analyses suggest that a relatively high fraction (58 %) is derived from surface melt. Additionally, the contribution from stored precipitation (snowmelt) outweighs by 5 times the input from in situ summer precipitation (rain). The magnitude and rate of local meltwater production are remarkably similar to those observed on the prior Surface Heat Budget of the Arctic Ocean (SHEBA) campaign, where the cumulative summer freshwater production totaled around 1 m during both. A relatively small fraction (10 %) of freshwater from melt remains in ponds, which is higher on more deformed second-year ice (SYI) compared to first-year ice (FYI) later in the summer. Most meltwater drains laterally and vertically, with vertical drainage enabling storage of freshwater internally in the ice by freshening brine channels. In the upper ocean, freshwater can accumulate in transient meltwater layers on the order of 0.1 to 1 m thick in leads and under the ice. The presence of such layers substantially impacts the coupled system by reducing bottom melt and allowing false bottom growth; reducing heat, nutrient, and gas exchange; and influencing ecosystem productivity. Regardless, the majority fraction of freshwater from melt is inferred to be ultimately incorporated into the upper ocean (75 %) or stored internally in the ice (14 %). Terms such as the annual sea ice freshwater production and meltwater storage in ponds could be used in future work as diagnostics for global climate and process models. For example, the range of values from the CESM2 climate model roughly encapsulate the observed total freshwater production, while storage in melt ponds is underestimated by about 50 %, suggesting pond drainage terms as a key process for investigation.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2019

A High Binary Fraction for the Most Massive Close-in Giant Planets and Brown Dwarf Desert Members

Stellar multiplicity is believed to influence planetary formation and evolution, although the precise nature and extent of this role remain ambiguous. We present a study aimed at testing the role of stellar multiplicity in the formation and/or evolution of the most massive, close-in planetary and substellar companions. Using past and new direct imaging observations, as well as the Gaia DR2 catalogue, we searched for wide binary companions to 38 stars hosting massive giant planets or brown dwarfs (M > 7 MJup) on orbits shorter than ∼1 au. We report the discovery of a new component in the WASP-14 system, and present an independent confirmation of a comoving companion to WASP-18. From a robust Bayesian statistical analysis, we derived a binary fraction of per cent between 20 and 10 000 au for our sample, twice as high as for field stars with a 3σ significance. This binary frequency was found to be larger than for lower-mass planets on similar orbits, and we observed a marginally higher binary rate for inner companions with periods shorter than 10 d. These results demonstrate that stellar companions greatly influence the formation and/or evolution of these systems, suggesting that the role played by binary companions becomes more important for higher-mass planets, and that this trend may be enhanced for systems with tighter orbits. Our analysis also revealed a peak in binary separation at 250 au, highlighting a shortfall of close binaries among our sample. This indicates that the mechanisms affecting planet and brown dwarf formation or evolution in binaries must operate from wide separations, although we found that the Kozai–Lidov mechanism is unlikely to be the dominant underlying process. We conclude that binarity plays a crucial role in the existence of very massive short-period giant planets and brown dwarf desert inhabitants, which are almost exclusively observed in multiple systems.

C Fontanive↗
DOE OSTI2022

Effect of the Lignin Structure on the Physicochemical Properties of Lignin-Grafted-Poly(ε-caprolactone) and Its Application for Water/Oil Separation

Lignin-grafted poly(ε-caprolactone) copolymers (lignin-g-PCLs) have shown wide application potentials in coatings, biocomposites, and biomedical fields. However, the structural heterogeneity of lignin affecting the structures and properties of lignin-g-PCL has been scarcely investigated. In this study, kraft lignin is fractionated into four precursors, namely, F ins , F1, F2, and F3, with declining molecular weights and increased hydroxyl contents. Lignin-g-PCLs are synthesized via ring-opening polymerization of ε-caprolactone with lignin and characterized by GPC, FTIR, 1 H and 31 P NMR, DSC, TGA, and iGC. The mechanical properties, UV barrier, and enzymatic biodegradability of the lignin-g-PCLs are evaluated. Results show that lignin with a higher molecular weight and aliphatic OH favors the copolymerization, leading to lignin-g-PCLs with longer PCL arms. Moreover, lignin incorporation improves the thermal stability, hydrophobicity, and UV-blocking ability but reduces the lipase hydrolyzability of the copolymers. We also demonstrated that the lignin-g-PCL-coated filter paper could successfully separate chloroform–, petroleum ether–, and hexane–water mixtures with an efficiency up to 99.2%. The separation efficiency remains above 90% even after 15 cycles. The structural differences of copolymers derived from the fractionation showed minimal influence on the separation efficiency. This work provides new insights into lignin-based copolymerization and the versatility of lignin valorization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Deconstruction of Woody Biomass via Protic and Aprotic Ionic Liquid Pretreatment for Ethanol Production

Ionic liquids (ILs) have emerged as important solvents for conversion of lignocellulosic feedstocks to fuels and chemicals due to their ability to enable efficient biomass deconstruction and fractionation. Woody biomass derived from forest and agricultural residues has the potential to be used for production of biofuels and its removal from forests can help mitigate disastrous wildfires in fire-prone states like California. This study evaluated woody biomass types (pine, almond, walnut, and fir) from California as potential biofuel feedstocks. The feedstocks were pretreated with the ILs cholinium lysinate ([Ch][Lys]) and ethanolamine acetate ([EOA][OAc]), followed by enzymatic hydrolysis and fermentation of lignocellulosic sugars to produce ethanol. Under optimal conditions, [EOA][OAc] pretreatment and enzymatic hydrolysis generated glucose and xylose yields in the range of 24-82 and 14-80%, respectively, while glucose and xylose yields for the [Ch][Lys] ranged between 28-83 and 23-80%, respectively. Maximum fermentable sugar was released from almond wood, and the lowest amount was from pine and fir. Further, blends of feedstocks were also explored, and a blend with a mass ratio of 2/2/1 (almond/walnut/pine) resulted in maximum glucose and xylose (>90%) yields using [Ch][Lys]. Fermentation of this hydrolysate using a C5-utilizing strain of Saccharomyces cerevisiae resulted in a maximum ethanol concentration of 17.9 g/L for mixture biomass hydrolysate, corresponding to 60.8% fermentation efficiency. This study represents the first demonstration of the use of these ILs for pretreatment of woody biomass blends that resulted in a high overall conversion efficiency for ethanol production.

09 BIOMASS FUELS↗
DOE OSTI2022

Amplification of primordial perturbations from the rise or fall of the inflaton

The next generation of cosmic microwave background, gravitational wave, and large scale structure, experiments will provide an unprecedented opportunity to probe the primordial power spectrum on small scales. An exciting possibility for what lurks on small scales is a sharp rise in the primordial power spectrum: this can lead to the formation of primordial black holes, providing a dark matter candidate or the black holes observed by the LIGO-Virgo collaboration. In this study we develop a mechanism for the amplification of the small-scale primordial power spectrum, in the context of single-field inflation with a step-like feature in the inflaton potential. Specifically, we consider both the upward and the downward step in the potential. We also discuss the possibility of the strong coupling between perturbations because the rapid changes of the potential derivatives with the time-dependent field value, caused by the step-like feature, could make the coupling stronger. As a result, we find that the perturbations can remain weakly coupled yet sufficiently enhanced if the step realizes the rapid changes of the potential derivatives in some fraction of an e-fold, Script O(P R 1/2) ≲ ΔN < 1, where P R is the power spectrum of the curvature perturbation at that time. We also discuss the PBH formation rate from the inflaton trapping at the local minimum, which can occur in the potential with an upward step.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

On the use of neural networks for energy reconstruction in high-granularity calorimeters

We contrasted the performance of deep neural networks — Convolutional Neural Network (CNN) and Graph Neural Network (GNN) — to current state of the art energy regression methods in a finely 3D-segmented calorimeter simulated by GEANT4. This comparative benchmark gives us some insight to assess the particular latent signals neural network methods exploit to achieve superior resolution. A CNN trained solely on a pure sample of pions achieved substantial improvement in the energy resolution for both single pions and jets over the conventional approaches. It maintained good performance for electron and photon reconstruction. We also used the Graph Neural Network (GNN) with edge convolution to assess the importance of timing information in the shower development for improved energy reconstruction. We implement a simple simulation based correction to the energy sum derived from the fraction of energy deposited in the electromagnetic shower component. This serves as an approximate dual-readout analogue for our benchmark comparison. Although this study does not include the simulation of detector effects, such as electronic noise, the margin of improvement seems robust enough to suggest these benefits will endure in real-world application. We also find reason to infer that the CNN/GNN methods leverage latent features that concur with our current understanding of the physics of calorimeter measurement.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Revisiting GeV-scale annihilating dark matter with the AMS-02 positron fraction

Antimatter cosmic-rays are used to probe new phenomena in physics, including dark matter annihilation. Here, we use the cosmic-ray positron fraction spectrum by the Alpha Magnetic Spectrometer, to search for such an annihilation signal in the Galaxy. We focus on dark matter with mass between 5 and 120 GeV, producing high-energy electrons and positrons. In these cosmic-ray energies the interplay of multiple astrophysical sources and phenomena, makes this search highly sensitive to the underlying astrophysical background assumptions. We use a vast public library of astrophysical models for the cosmic-ray positron fraction background, to derive robust upper limits on the dark matter's annihilation cross section for a number of annihilation channels. This library accounts for different types of cosmic-ray sources and uncertainties on their distribution in space and time. Also, it accounts for uncertainties on those sources' output, their injected into the interstellar medium cosmic-ray spectra and for uncertainties on cosmic-ray propagation. For any given dark matter particle mass and annihilation channel, upper limits on the annihilation cross section are given by bands that stretch a full order of magnitude in its value. Our work provides weaker limits compared to earlier results, that are however robust to all the relevant astrophysical uncertainties. Between 5 and 15 GeV, we find indications for a possible excess flux of cosmic-ray electrons and positrons. That excess is found for most, but not all of our astrophysical background parameter space, and its significance can vary appreciably. Further scrutiny is necessary to improve the understanding of these lower energy cosmic rays. Finally, we note that even if an excess signal is found in these energies, the current background uncertainties do not allow us to accurately deduce its underlying particle properties.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Assessment of CMIP5 and CMIP6 AMIP Simulated Clouds and Surface Shortwave Radiation Using ARM Observations over Different Climate Regions

The simulations of clouds and surface radiation from 10 CMIP6 models and their CMIP5 predecessors are compared to the ARM ground-based observations over different climate regions. Compared to the ARM radar-lidar derived total cloud fractions (CFT) and cloud fraction vertical distributions over the six selected sites, both CMIP5 and CMIP6 significantly underestimated CFT and low-level CF over the Northern Hemispheric midlatitude sites (SGPC1 and ENAC1), although the biases are generally smaller in CMIP6. Over the tropical oceanic site (TWPC2), 5 out of 10 CMIP6 models better simulated low-level CF than their CMIP5 predecessors. CMIP6 simulations generally agreed well with the ARM observations in CFT and cloud fraction vertical distributions over the tropical continental (MAOM1) and coastal (TWPC3) sites but missed the transitions between dry and wet seasons, similar to CMIP5 simulations. The improvements in downwelling shortwave fluxes (SWdn) at the surface from the majority of CMIP6 compared to CMIP5 primarily resulted from the improved cloud fraction simulations, especially over the SGPC1, ENAC1, and TWPC3 sites. By contrast, both CMIP5 and CMIP6 models exhibited diverse performances of clouds and shortwave radiation over the Arctic site (NSAC1), where CMIP6 models produced more clouds than CMIP5 models, especially for the low-level clouds. The comparisons between observations and CMIP5 and CMIP6 simulations provide valuable quantitative assessments of the accuracy of mean states and variabilities in the model simulations and shed light on general directions to improve climate models in different regions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

VITAL-Viral InhibiTors from ALgae: Generating Extracts for Antiviral Activity Assays

Algae from marine and extreme environments may provide novel compounds with antiviral activity for use in therapeutic drug development. We established a first effort combining experience and cultures used in biofuel research and from the Culture Collection of Microbes from Extreme Environments at PNNL. We generated a novel library of fractionated, algae-derived compounds for guiding research on small molecules in the environment and for the treatment of SARS-CoV-2 and other infectious diseases.

09 BIOMASS FUELS↗
DOE OSTI2025

Baryon fraction from the BAO amplitude: a consistent approach to parameterizing perturbation growth

Galaxy clustering constrains the baryon fraction Omega_b/Omega_m through the amplitude of baryon acoustic oscillations and the suppression of perturbations entering the horizon before recombination. This produces a different pre-recombination distribution of baryons and dark matter. After recombination, the gravitational potential responds to both components in proportion to their mass, allowing robust measurement of the baryon fraction. This is independent of new-physics scenarios altering the recombination background (e.g. Early Dark Energy). The accuracy of such measurements does, however, depend on how baryons and CDM are modeled in the power spectrum. Previous template-based splitting relied on approximate transfer functions that neglected part of information. We present a new method that embeds an extra parameter controlling the balance between baryons and dark matter in the growth terms of the perturbation equations in the CAMB Boltzmann solver. This approach captures the baryonic suppression of CDM prior to recombination, avoids inconsistencies, and yields a clean parametrization of the baryon fraction in the linear power spectrum, separating out the simple physics of growth due to the combined matter potential. We implement this framework in an analysis pipeline using Effective Field Theory of Large-Scale Structure with HOD-informed priors and validate it against noiseless LCDM and EDE cosmologies with DESI-like errors. The new scheme achieves comparable precision to previous splitting while reducing systematic biases, providing a more robust way to baryon-fraction measurements. In combination with BBN constraints on the baryon density and Alcock-Paczynski estimates of the matter density, these results strengthen the use of baryon fraction measurements to derive a Hubble constant from energy densities, with future DESI and Euclid data expected to deliver competitive constraints.

Crespi, Andrea [U. Waterloo (main); Waterloo U., I↗
NASA NTRS1972

Rubidium-strontium and potassium-argon age of lunar sample 15555.

The lunar mare basalt 15555 from the edge of Hadley Rille has been dated at 3.3 b.y. by both rubidium-strontium and potassium-argon techniques. Age and trace element abundances closely resemble those of the Apollo 12 mare basalts. Data from lunar basalts obtained thus far indicate that they cannot be derived by simple fractionation from a homogeneous source.

Murthy, V. R.↗