Search NASA⌕ Search

SEARCH · Search NASA

Results for “Frequency spectrum”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Power spectrum of small-scale density irregularities in the interstellar medium

Observations of the interstellar scintillation of radiation from 17 pulsars are reported which are used to place limits on the power spectrum of small-scale electron density irregularities in the interstellar medium. Measurements made at 340, 408, and 450 MHz in the dispersion measure range 3-57/cu cm pc of the time-dependent radio frequency spectrum of interstellar scintillations were analyzed to determine the scintillation index and a scintillation frequency-correlation scale based on the autocorrelation function in radio frequency of the fluctuations in scintillation. The dispersion-measure dependence of the scintillation frequency correlation scale is found to be consistent with both Gaussian model interstellar medium spectra and power-law spectra with indices between 3.0 and 4, while the radio-frequency scaling of the frequency correlation scale is consistent with power law indices between 2.8 and 3.9. However comparison of the shape of the radio-frequency autocorrelation function with model calculations indicates power law models with indices greater than 3.6 are possible. Data are also consistent with a local three-dimensional density spectrum at a wave number of 10 to the -9th/m of 3 x 10 to the 28th to 3 x 10 to the 29th/cu m.

Armstrong, J. W.↗

Searching for Turbulent Spectra in Mutliple Spacecraft Observations

The subject of magnetohydrodynamic simulations in the 1980's, magnetic turbulence has reemerged as a favored explanation for the production of fast magnetic reconnection. Recent three-dimensional simulations reveal the formation of secondary islands that serve to shorten the current sheet and increase the accelerating electric field, while both simulations and observations witness electron holes whose collapse energizes electrons. However, little work has been done to investigate the presence of turbulent magnetic and electric field spectra in association with in situ reconnection observations in space. In this study we address this deficiency by analyzing the wavelength spectra of two reconnection events established by multiple spacecraft observations in previous publications. We apply a k-filtering analysis to determine the wave vectors. To optimize the quality of the k-filtering analysis and minimize aliasing, we select multi-spacecraft observations having optimal spacecraft tetrahedral geometry and dimensions that resolve wavelengths within the ion diffusion region. We have chosen one dayside and one nightside reconnection event each observed by the Cluster spacecraft. Spatial correlation between the reconnecting current sheet and a turbulent magnetic spectrum supports an association between turbulence and reconnection in space. The k-filtering method, a wavelet time-frequency spectrum, and a polarization analysis serve to identify wave modes associated with the turbulence. A calculation of the reconnection electric field based on the normal component of the reconnecting magnetic field provides an estimate of the reconnection rate.

Wendel, Deirdre E.↗

The Atacama Cosmology Telescope: A Measurement of the Cosmic Microwave Background Power Spectrum at 148 AND 218 GHz from the 2008 Southern Survey

We present measurements of the cosmic microwave background (CMB) power spectrum made by the Atacama Cosmology Telescope at 148 GHz and 218 GHz, as well as the cross-frequency spectrum between the two channels. Our results dearly show the second through the seventh acoustic peaks in the CMB power spectrum. The measurements of these higher-order peaks provide an additional test of the ACDM cosmological model. At l > 3000, we detect power in excess of the primary anisotropy spectrum of the CMB. At lower multipoles 500 < l < 3000, we find evidence for gravitational lensing of the CMB in the power spectrum at the 2.8(sigma) level. We also detect a low level of Galactic dust in our maps, which demonstrates that we can recover known faint, diffuse signals.

Das, Sudeep↗

Spectrum of the Kleinmann-Low nebula from 29 to 125 micrometers

The infrared spectrum of the Kleinmann-Low nebula in M42 has been measured from 80 to 350 kaysers (approximately 29 to 125 microns) with a Michelson interferometer aboard the NASA Kuiper Airborne Observatory. The frequency spectrum peaks at about 185 kaysers. A simple model of the emission implies that the temperature is in the range 70-95 K and that the optical depth is at least 0.2 at the peak frequency. A possible absorption is seen at about 176 kaysers. Thermal emission by dust at a temperature of 71 K, with the absorption cross section proportional to frequency, provides a good fit to the data. Other thermal-emission models can also fit the spectrum. The data are compared with previous broad-band measurements. Upper limits are placed on expected line emission from the surrounding H II region at the position of the nebula.

Erickson, E. F.↗

The earth as a radio source: The non-thermal continuum

A weak nonthermal continuum, radiated by the earth from energetic electrons in the outer radiation zone, is studied. It is shown that the frequency spectrum of the continuum radiation consists of two components, a trapped component, which is permanently trapped within the magnetosphere at frequencies below the solar wind plasma frequency, and an escaping component which propagates freely away from the earth at frequencies above the solar wind plasma frequency. Direction finding measurements and measurements of the spatial distribution of intensity for both components indicated that the continuum radiation is generated (1) in a broad region which extends through the morning and early afternoon immediately beyond the plasmapause boundary, and (2) over a broad range of latitudes, including the magnetic equator. Possible mechanisms by which this radiation is generated, including gyro-synchrotron radiation from energetic electrons in the outer radiation zone, are discussed.

Gurnett, D. A.↗

Communications payloads for geostationary platforms

Trends in communication satellites show increasing reuse of the frequency spectrum through multiple spot beams and orthogonal polarization, as well as consortia operation. Current reliance on orbital arc separation for frequency reuse may be inadequate for the projected traffic growth and the orbital slotting proposals before the ITU. This paper notes that cost advantages can accrue through common use of spacecraft subsystems and multiple users' platforms aboard a common geostationary platform. The rationale for such platforms is described and potential payloads are suggested.

Fordyce, S. W.↗

Investigation of Noise Field and Velocity Profiles of an Afterburning Engine

Sound pressure levels, frequency spectrum, and jet velocity profiles are presented for an engine-afterburner combination at various values of afterburner fuel - air ratio. At the high fuel-air ratios, severe low-frequency resonance was encountered which represented more than half the total energy in the sound spectrum. At similar thrust conditions, lower sound pressure levels were obtained from a current fighter air craft with a different afterburner configuration. The lower sound pressure levels are attributed to resonance-free afterburner operation and thereby indicate the importance of acoustic considerations in afterburner design.

North, Warren J.↗

Three-dimensional organization of otolith-ocular reflexes in rhesus monkeys. III. Responses To translation

The three-dimensional (3-D) properties of the translational vestibulo-ocular reflexes (translational VORs) during lateral and fore-aft oscillations in complete darkness were studied in rhesus monkeys at frequencies between 0.16 and 25 Hz. In addition, constant velocity off-vertical axis rotations extended the frequency range to 0.02 Hz. During lateral motion, horizontal responses were in phase with linear velocity in the frequency range of 2-10 Hz. At both lower and higher frequencies, phase lags were introduced. Torsional response phase changed more than 180 degrees in the tested frequency range such that torsional eye movements, which could be regarded as compensatory to "an apparent roll tilt" at the lowest frequencies, became anticompensatory at all frequencies above approximately 1 Hz. These results suggest two functionally different frequency bandwidths for the translational VORs. In the low-frequency spectrum (<<0.5 Hz), horizontal responses compensatory to translation are small and high-pass-filtered whereas torsional response sensitivity is relatively frequency independent. At higher frequencies however, both horizontal and torsional response sensitivity and phase exhibit a similar frequency dependence, suggesting a common role during head translation. During up-down motion, vertical responses were in phase with translational velocity at 3-5 Hz but phase leads progressively increased for lower frequencies (>90 degrees at frequencies <0.2 Hz). No consistent dependence on static head orientation was observed for the vertical response components during up-down motion and the horizontal and torsional response components during lateral translation. The frequency response characteristics of the translational VORs were fitted by "periphery/brain stem" functions that related the linear acceleration input, transduced by primary otolith afferents, to the velocity signals providing the input to the velocity-to-position neural integrator and the oculomotor plant. The lowest-order, best-fit periphery/brain stem model that approximated the frequency dependence of the data consisted of a second order transfer function with two alternating poles (at 0.4 and 7.2 Hz) and zeros (at 0.035 and 3.4 Hz). In addition to clearly differentiator dynamics at low frequencies (less than approximately 0.5 Hz), there was no frequency bandwidth where the periphery/brain stem function could be approximated by an integrator, as previously suggested. In this scheme, the oculomotor plant dynamics are assumed to perform the necessary high-frequency integration as required by the reflex. The detailed frequency dependence of the data could only be precisely described by higher order functions with nonminimum phase characteristics that preclude simple filtering of afferent inputs and might be suggestive of distributed spatiotemporal processing of otolith signals in the translational VORs.

Non-NASA Center↗

Millimeter Wave Holographical Inspection of Honeycomb Composites

Multi-layered composite structures manufactured with honeycomb, foam or balsa wood cores are finding increasing utility in a variety of aerospace, transportation, and infrastructure applications. Due to the low conductivity and inhomogeneity associated with these composites standard nondestructive testing (NDT) methods are not always capable of inspecting their interior for various defects caused during the manufacturing process or as a result of in-service loading. On the contrary, microwave and millimeter wave NDT methods are well-suited for inspecting these structures since signals at these frequencies readily penetrate through these structures and reflect from different interior boundaries revealing the presence of a wide range of defects such as disbond, delamination, moisture and oil intrusion, impact damage, etc. Millimeter wave frequency spectrum spans 30 GHz - 300 GHz with corresponding wavelengths of 10 - 1 mm. Due to the inherent short wavelengths at these frequencies, one can produce high spatial resolution images of these composites either using real-antenna focused or synthetic-aperture focused methods. In addition, incorporation of swept-frequency in the latter method (i.e., holography) results in high-resolution three-dimensional images. This paper presents the basic steps behind producing such images at millimeter wave frequencies and the results of two honeycomb composite panels are demonstrated at Q-band (33-50 GHz). In addition, these results are compared to previous results using X-ray computed tomography.

Case, J. T.↗

Tensor-to-scalar ratio forecasts for extended LiteBIRD frequency configurations

LiteBIRD is a planned JAXA-led cosmic microwave background (CMB) B -mode satellite experiment aiming for launch in the late 2020s, with a primary goal of detecting the imprint of primordial inflationary gravitational waves. Its current baseline focal-plane configuration includes 15 frequency bands between 40 and 402 GHz, fulfilling the mission requirements to detect the amplitude of gravitational waves with the total uncertainty on the tensor-to-scalar ratio, δr , down to δr < 0.001. A key aspect of this performance is accurate astrophysical component separation, and the ability to remove polarized thermal dust emission is particularly important. In this paper we note that the CMB frequency spectrum falls off nearly exponentially above 300 GHz relative to the thermal dust spectral energy distribution, and a relatively minor high frequency extension can therefore result in even lower uncertainties and better model reconstructions. Specifically, we compared the baseline design with five extended configurations, while varying the underlying dust modeling, in each of which the High-Frequency Telescope (HFT) frequency range was shifted logarithmically toward higher frequencies, with an upper cutoff ranging between 400 and 600 GHz. In each case, we measured the tensor-to-scalar ratio r uncertainty and bias using both parametric and minimum-variance component-separation algorithms. When the thermal dust sky model includes a spatially varying spectral index and temperature, we find that the statistical uncertainty on r after foreground cleaning may be reduced by as much as 30–50% by extending the upper limit of the frequency range from 400 to 600 GHz, with most of the improvement already gained at 500 GHz. We also note that a broader frequency range leads to higher residuals when fitting an incorrect dust model, but also it is easier to discriminate between models through higher χ 2 sensitivity. Even in the case in which the fitting procedure does not correspond to the underlying dust model in the sky, and when the highest frequency data cannot be modeled with sufficient fidelity and must be excluded from the analysis, the uncertainty on r increases by only about 5% for a 500 GHz configuration compared to the baseline.

U. Fuskeland↗

Computer modeling of pulsed CO2 lasers for lidar applications

The object of this effort is to develop code to enable the accurate prediction of the performance of pulsed transversely excited (TE) CO2 lasers prior to their construction. This is of particular benefit to the NASA Laser Atmospheric Wind Sounder (LAWS) project. A benefit of the completed code is that although developed specifically for the pulsed CO2 laser much of the code can be modified to model other laser systems of interest to the lidar community. A Boltzmann equation solver has been developed which enables the electron excitation rates for the vibrational levels of CO2 and N2, together with the electron ionization and attachment coefficients to be determined for any CO2 laser gas mixture consisting of a combination of CO2, N2, CO, He and CO. The validity of the model has been verified by comparison with published material. The results from the Boltzmann equation solver have been used as input to the laser kinetics code which is currently under development. A numerical code to model the laser induced medium perturbation (LIMP) arising from the relaxation of the lower laser level has been developed and used to determine the effect of LIMP on the frequency spectrum of the LAWS laser output pulse. The enclosed figures show representative results for a laser operating at 0.5 atm. with a discharge cross-section of 4.5 cm to produce a 20 J pulse with aFWHM of 3.1 microns. The first four plots show the temporal evolution of the laser pulse power, energy evolution, LIMP frequency chirp and electric field magnitude. The electric field magnitude is taken by beating the calculated complex electric field and beating it with a local oscillator signal. The remaining two figures show the power spectrum and energy distribution in the pulse as a function of the varying pulse frequency. The LIMP theory has been compared with experimental data from the NOAA Windvan Lidar and has been found to be in good agreement.

Spiers, Gary D.↗

Testing of 30-GHz low noise receivers

NASA-sponsored studies of the growth in communications traffic have indicated that the frequency spectrum allocated to fix-service satellites at the C and Ku bands will reach saturation by the early 1990's. The next higher frequency bands allocated for communications satellties are 27.5 to 30 GHz for the uplink and 17.7 to 20.2 GHz for the downlink. Current plans for developing satellite systems that use these bands include a NASA demonstration satellite (ACTS). One of the components identified as critical to the success of that mission is a 27.5 to 30 GHz satellite receiver. In response to that identification, NASA has sponsored the development of such a receiver to the proof-of-concept (POC) level. Design and fabrication of such POC model receivers was carried out under parallel contracts awarded to LNR Communications, Inc. of Hauppauge, New York and to ITT Defense Communications Division of Nutley, New Jersey. The most significant of the performance goals were a 5 db maximum noise figure, a 2.5 GHz passband, and e0 dB Rf to If gain. Following delivery of hardware from each of the contractors, an in-house test program was undertaken at NASA's Lewis Research Center in order to verify the contractor-reported performance and to provide a comparison of the two receivers under identical test conditions. The present paper reports the results of those tests.

Conroy, M. J.↗

Testing of 30-GHz low noise receivers

NASA-sponsored studies of the growth in communications traffic have indicated that the frequency spectrum allocated to fix-service satellites at the C and Ku bands will reach saturation by the early 1990's. The next higher frequency bands allocated for communications satellites are 27.5 to 30 GHz for the uplink and 17.7 to 20.2 GHz for the downlink. Current plans for developing satellite systems that use these bands include a NASA demonstration satellite (ACTS). One of the components identified as critical to the success of that mission is a 27.5 to 30 GHz satellite receiver. In response to that identification, NASA has sponsored the development of such a receiver to the proof-of-concept (POC) level. Design and fabrication of such POC model receivers was carried out under parallel contracts awarded to LNR Communications, Inc. of Hauppauge, New York and to ITT Defense Communications Division of Nutley, New Jersey. The most significant of the performance goals were a 5 dB maximum noise figure, a 2.5 GHz passband, and 20 dB RF to IF gain. Following delivery of hardware from each of the contractors, an in-house test program was undertaken at NASA's Lewis Research Center in order to verify the contractor-reported performance and to provide a comparison of the two receivers under identical test conditions. The present paper reports the results of those tests.

Conroy, M. J.↗

On sound generation by turbulent convection: A new look at old results

We have revisited the problem of acoustic wave generation by turbulent convection in stellar atmospheres. The theory of aerodynamically generated sound, originally developed by Lighthill and later modified by Stein to include the effects of stratification, has been used to estimate the acoustic wave energy flux generated in solar and stellar convection zones. We correct the earlier computations by incorporating an improved description of the spatial and temporal spectrum of the turbulent convection. We show the dependence of the resulting wave fluxes on the nature of the turbulence, and compute the wave energy spectra and wave energy fluxes generated in the Sun on the basis of a mixing-length model of the solar convection zone. In contrast to the previous results, we show that the acoustic energy generation does not depend very sensitively on the turbulent energy spectrum. However, typical total acoustic fluxes of order F(sub A) = 5 x 10(exp 7) ergs/sq cm/s with a peak of the acoustic frequency spectrum near omega = 100 mHz are found to be comparable to those previously calculated. The acoustic flux turns out to be strongly dependent on the solar model, scaling with the mixing-length parameter alpha as alpha(exp 3.8). The computed fluxes most likely constitute a lower limit on the acoustic energy produced in the solar convection zone if recent convection simulations suggesting the presence of shocks near the upper layers of the convection zone apply to the Sun.

Musielak, Z. E.↗

6 Hz quasiperiodic oscillations from low-mass X-ray binaries - The sound of an accretion disk?

Quasiperiodic oscillations (QPOs) at frequencies of 5-8 Hz are a common feature of low-mass X-ray binaries (LMXBs) during their normal branch (NB) spectral states. We propose that this frequency band is essentially a band of rotation frequencies in a thick accretion disk. The high luminosities in the NB state give rise to the thick disk and slow down the dynamical timescales. Density and optical-thickness perturbations in a subsonic region of the disk have the frequency spectrum of sound in a rotating medium. X-rays scattered through the subsonic region are modulated by long wavelength optical-thickness oscillations whose frequencies, determined by the rotation rate and vorticity, are observed as the NB QPOs.

Alpar, M. A.↗

High-Resolution Inspection of the Space Shuttle External Tank Spray-on-Foam Insulation (SOFI) using Focused Millimeter Waves at D-Band (150 GHz)

Space Shuttle Columbia's catastrophic failure has been attributed to a piece of spray-on-foam insulation (SOFI) that was dislodged from the external tank and struck the leading edge of the left wing. A piece of SOFI was also dislodged in the recent Space Shuttle Discovery's flight. Clearly, there is a great and urgent need to inspect the external tank SOFI and other similar insulating structures (including the acreage heat tile) in a reliable and robust fashion. In the past two years, millimeter wave nondestructive testing methods, using both real and synthetic focusing techniques, have shown great potential for this purpose. Recently obtained real-focused images from several different and complex SOFI panels have demonstrated the utility of these methods as being viable, robust, repeatable, simple, portable and effective. D-band frequency range which covers a frequency spectrum of 110- 170 GHz is well-suited for this purpose given the nature of the foam which causes significant scattering at much higher frequencies. This paper presents the results of using continuous-wave (CW) reflectometry conducted on several typical and complex SOFI panes at 150 GHz.

Kharkovsky, S.↗

Alternative licensing arrangements and spectrum economics: The case of multipoint distribution service

At present, the Federal Communications Commission assigns radio licenses following a determination of the public interest. Whenever mutually conflicting license applications are filed, the Commission holds a comparative hearing. This assignment mechanism is criticized as cumbersome and unrealiable, and three alternatives are proposed: increasing the available spectrum, and either auctions or lotteries of radio licenses. An analysis is presented of the present system and these alternative arrangments for assigning rights to the frequency spectrum for the Multipoint Distribution Service (MDS). Although MDS is a relatively minor radio service, it serves as a prototype for message distribution services with a large potential for use in business communications. Moreover, the way in which the initial batch of MDS licenses was assigned provides a unique opportunity for empirical work on the economics of the licensing process.

Agnew, C. E.↗

DMSK Receiver For Mobile/Satellite Service

Receiver for 2.4-kbit/s differential minimum-shift keying (DMSK) and Gaussian minimum-shift keying(GMSK) suitable for communication between land-mobile stations via geostationary satellites. Operating on phase-shifted signal in 800-MHz band, in presence of fading and Doppler frequency shifts, receiver compact, makes efficient use of frequency spectrum, and wastes little power. Receiver design implemented in very-large-scale-integrated circuits. Basic DMSK receiver design relies on baseband rather than intermediate-frequency processing of in-phase and quadrature signal components because phase errors due to differential delays smaller at baseband.

Davarian, Faramaz↗