SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The present disclosure is directed to a low temperature method of preparing graphene. The method comprises applying a graphene oxide to a substrate and treating the graphene oxide on the substrate using photoreduction to reduce and stitch the graphene oxide to graphene. The present disclosure is also directed to graphene produced according to the aforementioned method.
The existence of asymmetry in X-ray photoelectron spectroscopy (XPS) photoemission lines is widely accepted, but line shapes designed to accommodate asymmetry are generally lacking in theoretical justification. Here in this work, we present a new line shape for describing asymmetry in XPS signals that is based on two facts. First, the most widely known line shape for fitting asymmetric XPS signals that has a theoretical basis, referred to as the Doniach-Sunjic (DS) line shape, suffers from a mathematical inconvenience, which is that for asymmetric shapes the area beneath the curve (above the x-axis) is infinite. Second, it is common practice in XPS to remove the inelastically scattered background response of a peak in question with the Shirley algorithm. The new line shape described herein attempts to retain the theoretical virtues of the DS line shape, while allowing the use of a Shirley background, with the consequence that the resulting line shape has a finite area. To illustrate the use of this Doniach-Sunjic-Shirley (DSS) line shape, a set of spectra obtained from varying amounts of graphene oxide (GO) and reduced GO on a patterned, heterogeneous surface are fit and discussed.
A catalyst architecture with mesoporous silica coating Ru nanoparticles on reduced graphene oxide (mSiO 2 /Ru/rGO) localizes the 2 nm Ru solely at the closed bottoms of 2.9 nm diameter mesopores. mSiO 2 /Ru/rGO catalyzes the rapid, selective hydrogenolysis of polyolefins at wax formation rates (ν wax ) up to 1700 g wax ·g Ru –1 ·h –1 and a turnover frequency (TOF) for C–C bond cleavage of 130 ± 8 min –1 . The ν wax and TOF for mSiO 2 /Ru/rGO are 23× and 16× those of nonporous Ru/rGO, respectively, indicating that faster chain cleavage is also more selective inside mesopores. The methane yield from mSiO 2 /Ru/rGO is ca. 30% of the value obtained from Ru/rGO. Methane decreases, and wax selectivity improves with narrow-pore (2.3 nm) mSiO 2 /Ru/rGO. The reaction rate decreases at lower and higher H 2 pressures from its maximum at 37 bar. Log(TOF)-log(P H2 ) plots reveal rates ∝ [P H2 ] 2.8 or [P H2 ] −2.0 in the lower or higher pressure ranges, respectively. Corresponding plots for Ru/C give rates ∝ [P H2 ] 1 or [P H2 ] −2.4 . Ru is hydrocarbon-covered at low pressure; thus, the higher H 2 order for mSiO 2 /Ru/rGO indicates that mesopores increase the density of cleavable unsaturated moieties on the Ru surface. The lower H 2 order on Ru/C implies a lower density of cleavable groups because saturated segments occupy a larger fraction of the Ru surface. Higher surface occupancy by the hydrocarbon reactant correlates with more methane formation. Therefore, pore confinement, narrower pore diameter in mSiO 2 /Ru/rGO, or higher H 2 pressure leads to lower methane yields. Ru nanoparticles in mSiO 2 /Ru/rGO maintain equivalent activity and selectivity over five recycling tests.
The main goal of this project was to produce high-value carbon nanomaterials and carbon sorbents from domestic coal resources in a cost-effective manner. Four types of domestic coal samples were processed through a combination of deashing, devolatilization, oxidation, reduction, and activation treatments to produce graphene oxide (GO), reduced graphene oxide (RGO), and activated carbon (AC). The precursors and developed materials were extensively characterized by various methods to investigate the impact of the coal feedstock type on the yield and quality of each product. A commercial graphite-based GO sample was included in the experimental work as the baseline material for comparison with the coal-based materials developed in this work. The performed work also included a technoeconomic analysis and cost estimation for a plant processing 20 tons/day coal, a market evaluation for the graphene materials, and a technology gap analysis. A simple process by concentrated nitric acid oxidation is used to oxidize coal precursors for the production of GO. Fine oxidized coal particles that were separated from larger oxidized coal particles had significantly higher oxygen contents and were identified as coal-based GO samples. Coarse oxidized coal particles were used as precursors for production of AC. Based on the Raman spectroscopy results, coal-based GO samples exhibited G and D bands similar to those of graphite-based GO samples. X-ray photoelectron spectroscopy revealed that coal-based GO samples had surface oxygen contents of ~26-35% that were higher than the oxygen contents of graphite-based GO samples. Larger particles of oxidized coal samples were activated under different conditions to produce high surface area functionalized AC. Prepared materials had surface areas exceeding 1,500 m 2 /g and pore volumes more than 1 cm 3 /g with different pore size distributions. Reduced graphene oxide samples were prepared by thermal reduction of both coal-based and graphite-based GO samples at 170-2800 ºC. Coal-based and graphite-based RGO samples exhibited similar carbon contents, Raman spectra, and XRD profiles. Heat treatment above 1500 ºC shifted RGO to synthetic graphite. Among anthracite, bituminous, subbituminous, and lignite coals tested, anthracite was the best precursor to produce carbon nanomaterials exhibiting properties similar to those of graphite-based materials. Anthracite-based carbon nanomaterials also had the highest production yields. Technoeconomic analysis estimated the production cost of GO and RGO for anthracite-based samples at about 2,600 and 4,200 $/ton, respectively, which is about two orders of magnitude lower than the current estimated price of graphite-based materials. Several gaps to further develop the proposed technology were identified and discussed that include process and equipment optimization, process integration, need for additional bench- and pilot-scale experiments, and other items to reduce the scale up risk. Market analysis reports suggested a compound annual growth rate of 40% for graphene and related materials. Short-term applications include composites, inks, and coatings. However, energy storage applications appear to be the dominant potential long-term applications. Different applications of coal-based GO and RGO need to be explored and clear metrics and standards for each application need to be developed.
Nanoporous membranes with two-dimensional materials such as graphene oxide have attracted attention in volatile organic compounds (VOCs) and H 2 adsorption because of their unique molecular sieving properties and operational simplicity. However, agglomeration of graphene sheets and low efficiency remain challenging. Therefore, we designed hierarchical nanoporous membranes (HNMs), a class of nanocomposites combined with a carbon sphere and graphene oxide. Hierarchical carbon spheres, prepared following Murray’s law using chemical activation incorporating microwave heating, act as spacers and adsorbents. Hierarchical carbon spheres preclude the agglomeration of graphene oxide, while graphene oxide sheets physically disperse, ensuring structural stability. The obtained HNMs contain micropores that are dominated by a combination of ultramicropores and mesopores, resulting in high VOCs/H 2 adsorption capacity, up to 235 and 352 mg/g at 200 ppmv and 3.3 weight % (77 K and 1.2 bar), respectively. Our work substantially expands the potential for HNMs applications in the environmental and energy fields.
Coal is the most abundant energy and hydrocarbon resource in the United States which has been primarily used for power generation. With the increasing retirement of coal power plants and transition to a low-carbon emission economy, the future use of coal will likely shift to a feedstock source for production of valuable materials for different applications. In this review, the latest research reported on production of graphene-like materials in a powder form from coal is compiled and discussed. Here, this review includes: 1) brief background information on graphene and related materials (GRM); 2) relevant material, resource, economic, and socioeconomic information regarding suitability of coal as a potential feedstock for production of GRM; 3) a summary of common approaches for coal upgrading for preparation of more suitable precursors for production of GRM; 4) a compilation and analysis of the reported routes and methods for preparation of GRM from coal and coal derivatives; and 5) reported potential applications of coal-based GRM.
In this report, we describe methods to enhance mechanical properties of a renewable thermoplastic rubber by incorporating functional graphene platelets into an equal-mass mixture of lignin, a feedstock from plant biomass, and a nitrile-butadiene rubber having 41 mol % acrylonitrile content (NBR41) that form a nanocomposite. Not all lignins yield mechanically strong material when they are combined with NBR41, and thus, limit its use for such rubbery products. Here, we evaluate different graphene oxides (GO) and reduced graphene oxides (rGO) dry-powders with different surface areas, functionality, and wettability in the synthesis of performance-enhanced nanocomposites of soft lignin/NBR41 matrix via a solvent-free, high shear reactive process. High surface area GO (HSGO) platelets with strong hydrophilicity exhibit good dispersion in the multiphase lignin/NBR41 composites with lignin dispersion varying from 200 to 2000 nm, resulting in superior reinforcement over other graphene derivatives. The addition of 1–4 wt % HSGO increased the tensile stress of the lignin/NBR41 thermoplastic rubber matrix by 60–160% (15–24 MPa) and the modulus by 200–700% (60–140 MPa). Scanning electron microscopy and small angle X-ray scattering results show that the well-dispersed HSGO platelets effectively disrupt the lignin-rich aggregates in NBR41 matrix, resulting in both strength and stiffness enhancements in the formed nanocomposites. This report on performance enhancement of lignin-based renewable polymers via the production of nanocomposite would increase potential for ‘finding the value of lignin’—a grand challenge associated with modern biorefineries.
Bipolar membranes (BPMs) create counteracting spatial gradients of pH and electrostatic potential in electrochemical systems, enabling applications in pH regulation, electrocatalysis, and separations. At the polarized junction of a BPM the water dissociation (WD, 2H2O ⇌ H3O+ + OH-) reaction can be driven, but it remains poorly understood. In this Perspective, we integrate molecular insights from bulk-water autoionization and the associated field effects with continuum descriptions of BPM electrostatics and experimental WD kinetic analyses to describe possible mechanisms of voltage-driven WD. Pristine BPM junctions highlight both the limits of primarily electric-field-driven WD and the practical challenges of junction stability at extreme reverse bias. Introducing heterogeneous catalyst layers, commonly metal oxides and graphene oxides, accelerates WD by orders of magnitude through hypothesized coupled effects in which surface acid-base functionality and high-density hydroxyl sites mediate proton-transfer steps, and catalyst mobile electronic/ionic charges redistribute the junction electric potential drop to shape the local electric fields and reactive microenvironments. Kinetic analyses suggest two regimes of heterogeneous WD mechanism, including field-driven ordering of interfacial water and a Second-Wien-Effect dissociation-barrier lowering. We conclude by defining the key unknown variables (local pH, electrostatic potential, catalyst charge state and relationships among mechanisms) and outlining experimental and multiscale modeling strategies needed for predictive WD catalysis and for controlling related ion-transfer reactions.
The project (Award DE-FE0032146), led by Baker Hughes in collaboration with the University of Wyoming, aims to develop composite PEEK (Polyether-ether-ketone) materials enhanced using coal-derived graphene-based additives suitable for additive manufacturing (3D printing). Coal char (CC), graphene oxide (GO), and reduced graphene oxide (rGO), derived from Powder River Basin (PRB) coal, were successfully integrated into commercial PEEK feedstock. The composite PEEK materials demonstrated tensile and flexural strengths and modulus, Shore hardness, and thermal properties similar to unfilled PEEK. Dielectric strength of 0.5% GO/PEEK is twice that of unfilled PEEK. However, tensile elongation and Izod impact toughness of the composite materials are lower than unfilled PEEK. The 10% CC/PEEK material also shows good recyclability albeit with slightly increased glass transition and cold crystallization temperatures. Filaments of the composite PEEK materials were fabricated using a Filabot system. 3D printing of the composite PEEK initially encountered feeding stoppage caused by the non-uniform diameter of the filament, which was resolved by reducing the nominal diameter from 1.75 to 1.65 mm. The printability of the composite PEEK filaments is limited in geometry and build time, driven by differences in base PEEK feedstock from the commercial PEEK filament at printing conditions. Prototype part printed using the composite filaments shows inconsistent bead width and bead interruption resulting in porosity. Preliminary process and economic evaluation using PRB coal char estimates the cost of GO to be $0.5/lb. Considering the small fraction expected in the composite PEEK, the GO cost is several orders of magnitude lower than the commercial PEEK filament. It is recommended that the printability of composite PEEK filaments to be improved by optimizing the composite PEEK material at the printing conditions and reducing the variations in filament extrusion. Also important is to identify the mechanisms of how coal-derived additives affect the composite PEEK performance and printing characteristics to allow customized material design and processing for target performance.
The atomically dispersed materials promise ultrafast redox kinetics for alkali-ion storage. However, their relatively low mass loading limits their application. In this work, well-dispersed Sb atoms with high-loading of 23.3 wt % anchored in sulfur-rich amorphous carbon-coated reduced graphene oxide matrix (SbSA/C) are prepared by a coordinative and spatial coconfinement methodology including freeze-casting the well-dissolved Sb-chelates (Sb-thioglycolate) within graphene oxide suspension and post heating-treatment. The reduced graphene oxide substrate features open two-dimensional spatial framework for loading atomically dispersive Sb species, and the pyrolyzed Sb-chelates would provide not only massive desirable heteroatoms (S, O) for coordinating the Sb atoms but also in situ pyrolytic carbon for further spatially separating those dispersive atoms. The coordinative and spatial coconfinement engineering also endows the SbSA/C composite with atomic-level Sb atoms against migration and agglomeration during electrochemical K-storage cycling. In situ TEM reveals the uniform potassiation behavior of the SbSA/C without obvious volume change; DFT calculation and electrochemical characterization suggest the significantly lower K-ion diffusion energy barrier. Therefore, on the basis of both the active Sb center and the coordinative heteroatom, the SbSA/C electrode delivers high fast-charging capacity, outstanding rate capability and long-lifespan performance in half/full K-ion batteries (e.g., a stable capacity of 331.3 mA h g –1 is maintained over 1100 cycles at 1.0 A g –1 for half-cell).
Over the past 20 years, nanocarbons have become more significant as nanostructured fillers in composites and, more recently, as functional elements in a brand-new class of hybrid materials. Microwave-assisted synthesis and processing is a burgeoning subject matter in materials research with significant strides in the realm of nanocarbon during the last decade. Here, the review examines recent approaches to producing various nanocarbons using microwaves as energy sources, the characterization of such materials for various applications, and their results. The underlying factors supporting the increased performance of such materials or their composites are analyzed and reaction mechanisms are presented wherever necessary. In particular, the recently developed and verified approaches to produce porous carbon materials, CNTs and fibers, carbon nanospheres, carbon dots, CQDs, reduced graphene oxide, nanocarbon hybrid materials, and the purification and modification of CNTs are discussed. The reduction of graphene oxide and the preparation of graphene derivative hybrids using solid-state and liquid-state routes such as polyopl, mixed solvents, ionic liquids, and microwave-assisted hydrothermal/solvothermal methods are analyzed in detail. In addition, the principles of microwave heating in liquid and solid states, the use of metals particles as arcing agents or catalysts, and carbonaceous materials as internal or external susceptors during synthesis and modifications are presented in detail.
Using high-resolution transmission electron microscopy and electron energy-loss spectroscopy, we demonstrate that beryllium oxide crystallizes in the planar hexagonal structure in a graphene liquid cell by a wet-chemistry approach. These liquid cells can feature van-der-Waals pressures up to 1 GPa, producing a miniaturized high-pressure container for the crystallization in solution. The thickness of as-received crystals is beyond the thermodynamic ultra-thin limit above which the wurtzite phase is energetically more favorable according to the theoretical prediction. The crystallization of the planar phase is ascribed to the near-free-standing condition afforded by the graphene surface. Our calculations show that the energy barrier of the phase transition is responsible for the observed thickness beyond the previously predicted limit. These findings open a new door for exploring aqueous-solution approaches of more metal-oxide semiconductors with exotic phase structures and properties in graphene-encapsulated confined cells.
The lack of advanced electrode materials is one of the main factors hindering the development of flexible rechargeable aqueous batteries (RABs) for high specific energy density and structural stability. It is also challenging to achieve high-capacity performance for both the positive and negative electrodes simultaneously. In this work, it is demonstrated that, by smartly designing the composite structures of positive and negative electrodes via one-step electrodeposition strategy, the energy storage performance of the RAB is largely enhanced. For positive electrode material synthesis, Co-Cu double hydroxides (Co-Cu-DH) nanosheets are skillfully rooted into electroreduced graphene oxide (eRG) via hydrogen bonding, in which graphene oxide reduction, Co-Cu-DH nucleation/growth, and formation of hydrogen bonding between Co-Cu-DH and eRG simultaneously occur. Moreover, when a RAB based on Co-Cu-DH@eRG//FeOOH@eRG using the same composite design strategy is established, a wide operating voltage window of ≈1.8 V, a high specific energy density of ≈142.8 Wh kg –1 at ≈890 W kg –1 , and long-term cyclic stability (88.5% of capacity retention after 12 000 cycles) are obtained. This study presents a general compositing strategy for the development of advanced electrode materials, and it is expected to stimulate future material synthesis/design in RABs toward the goal of high energy density storage.
Metallic lithium (Li) anodes are crucial for the development of high specific energy batteries yet plagued by their poor cycling efficiency. Electrode architecture engineering is vital for maintaining a stable anode volume and suppress Li corrosion during cycling. In this paper, a reduced graphene oxide “host” framework for Li metal anodes is further optimized by embedding silicon (Si) nanoparticles between the graphene layers. They serve as Li nucleation seeds to promote Li deposition within the framework even without pre-stored Li. Meanwhile, the LixSi alloy particles serve as supporting “pillars” between the graphene layers, enabling a minimized thickness shrinkage after full stripping of metallic Li. Combined with a Li compatible electrolyte, 99.4% Coulombic efficiency over ~600 cycles is achieved, and stable cycling of a Li||NMC532 full cell for ~380 cycles with negligible capacity decay is realized.
Graphene and carbon nanotube (CNT)-based gas/vapor sensors have gained much traction for numerous applications over the last decade due to their excellent sensing performance at ambient conditions. Inkjet printing various forms of graphene (reduced graphene oxide or modified graphene) and CNT (single-wall nanotubes (SWNTs) or multiwall nanotubes (MWNTs)) nanomaterials allows fabrication onto flexible substrates which enable gas sensing applications in flexible electronics. This review focuses on their recent developments and provides an overview of the state-of-the-art in inkjet printing of graphene and CNT based sensors targeting gases, such as NO 2 , Cl 2 , CO 2 , NH 3 , and organic vapors. Moreover, this review presents the current enhancements and challenges of printing CNT and graphene-based gas/vapor sensors, the role of defects, and advanced printing techniques using these nanomaterials, while highlighting challenges in reliability and reproducibility. The future potential and outlook of this rapidly growing research are analyzed as well.
Future technologies are likely to exploit flexible heterostructures exhibiting multifunctional properties constructed from multiple materials. One technique for the synthesis of such systems relies on remote epitaxy, a method employing graphene as a sacrificial layer between a crystalline substrate and an epitaxial film. The technique can be used to create single crystal heterostructures comprised of stacked epitaxial films, their properties optimized by minimizing incompatibilities between the different materials. Details regarding nucleation and growth via remote epitaxy remain unknown, however, due to the many difficulties in studying synthesis in the growth environment with atomic-scale resolution. Here, we describe an in situ synchrotron x-ray investigation of complex oxide thin film growth on graphene by molecular beam epitaxy. Phase retrieval methods were used to reconstruct the electron density profiles from x-ray crystal truncation rods measured under different growth conditions. Our in situ observations combined with post-growth spectroscopy provide a number of key insights regarding graphene in the synthesis environment and the resulting effects on the complex oxide/graphene heterostructure.
Graphene is rapidly expanding for applications ranging from nanoelectronics to space exploration. A material with such enormous potential requires a variety of synthesis methods. Here, we report a library of relatively sustainable redox-active organic molecules for the reduction of graphene oxide (GO) namely N,N,N',N'-tetramethyl-p-phenylenediamine (TMPD), 7,7,8,8-tetracyanoquinodimethane (TCNQ), ferrocene (Ferro), and decamethylferrocene (DFerro). Among them, the reduction of GO using TMPD starts even with simple hand-shaking for just a few minutes. By controlling the sonication time under ambient conditions, one can control the electronic properties of the reduced graphene oxide (rGO). The resulting free-standing films delivered a capacitance of 185 F/g when tested them as supercapacitor electrodes. We also demonstrated that TMPD can exfoliate graphite into few-layer graphene sheets with simple sonication. Here, we further show that under mild heating, these molecules can serve as dopants during the reduction process to produce nitrogen-doped graphene. Our results may guide researchers to explore sustainable organic molecules for the large-scale production of graphene-based materials for diverse applications.
To overcome electronic transport issues of layered titanates in sodium-ion batteries, we have designed and synthesized composites of lepidocrocite titanates with reduced graphene oxide through a solution-based self-assembly approach. The parent lepidocrocite titanate (K 0.8 [Ti 1.73 Li 0.27 ]O 4 ) was exfoliated by a soft-chemical approach and mechanical shaking. Exfoliated layered titania sheets (LTO) were then combined with reduced graphene oxide (rGO) layers to assemble into composites through flocculation. Countercations (i.e., Mg 2+ ) were used for the self-assembly of negatively charged titania and rGO nanosheets via flocculation. The carbon content in the composites was tuned from 1 to 17% by changing the ratio of titania and rGO sheets in the mixed colloidal suspensions. Electrodes were processed with as-prepared LTO-rGO composites without any carbon additives and tested in sodium half-cell configurations. Mg + -coagulated LTO-rGO composite electrodes deliver higher capacities than electrodes prepared with coagulated titania sheets and 10% acetylene black in sodium half-cells and display good capacity retention after 50 cycles. Electrochemical impedance spectroscopy results indicate lower charge transfer resistance for LTO-14.5%rGO composites than that of coagulated titania sheets with 10% acetylene black. A power law analysis of cells containing the composites indicate a hybrid mechanism consisting of both surface and diffusional processes. A comparison with a similar system, that of dopamine-derived LTO-C heterostructures, reveal significant differences. While capacities showed a strong dependence on carbon content for the dopamine-derived materials, this was not true for the LTO-rGO composites. Instead, the highest capacity was obtained for the 14.5% rGO sample, with a lower value obtained for the 17% rGO sample. A greater proportion of the redox processes were surface rather than diffusional in nature for the LTO-rGO composites as well.