Modification of DSIF SCM feeds Final report, 11 Jun. 1963 - 7 Jan. 1964
Multimode rectangular horn for pattern shaping and monopulse capability in Cassegrain antenna feed
TRACKING ANTENNA↗
SEARCH · Search NASA
Results for “HORN ANTENNA”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Multifrequency, broadband, dual-polarized antenna
Corrugated, conical horn, ring-loaded antenna can be fed through vertex of cone with wideband waveguides, such as double-ridged rectangular or quad-ridged circular, or simply ring-loaded, corrugated waveguides. Antenna is also fed through coupling apertures in side of cone at appropriate diameters.
Green, K. A.↗
Absolute Measurements of the Radio Flux from Cassiopeia A and Taurus A at 3.64 and 1.94 Cm
Transit drift-scan observations of radio sources using cornucopia horn reflector antenna
HORN ANTENNA↗
Single Aperture Multi-Mode Monopulse Antenna Pointing with Corrugated Horn
This paper presents systems modeling, simulation and implementation of Ka-band monopulse tracking feed for antennas in NASA/DSN ground stations.
Lo, Victor↗
A GTD study of pyramidal horns for offset reflector antenna applications
An efficient computational method is demonstrated for determining the far-field patterns of reflectors illuminated by pyramidal horns. A uniform geometrical theory of diffraction (GTD) formulation is used to determine the near- and far-fields of the horn. The far-field patterns of the offset reflector are constructed using the physical optics (PO) formulation in conjunction with the Jacobi-Bessel expansion method. Many representative results are shown for the far-field patterns of the reflector. In particular, the concept of the optimum phase center for the best location of a horn illuminating a reflector is carefully studied and some useful observations are made.
Huang, J.↗
Multilayer Patch Antenna Surrounded by a Metallic Wall
A multilayer patch antenna, similar to a Yagi antenna, surrounded by a metallic wall has been devised to satisfy requirements to fit within a specified size and shape and to generate a beam with a half-power angular width of <=40 deg. This antenna provides a gain of about 14 dB; in contrast, the gain of a typical single-patch antenna lies between 5 and 6 dB. This antenna can be considered an alternative to a two-dimensional array of patch antenna elements, or to a horn or helical antenna. Unlike a two-dimensional array of patches, this antenna can function without need for a power-division network (unless circular polarization is needed). The profile of this antenna is lower than that of a horn or a helical antenna designed for the same frequency. The primary disadvantage of this antenna, relative to a horn or a helical antenna, is that its footprint is slightly larger.
Zawadzki, Mark↗
Property of radially quadratic reflector systems
This report shows that when considered in terms of optical geometry, radially parabolic and radially hyperbolic mirrors used as mirrors for Cassegrain and parabolic antennas possess values similar to common conical horn reflector antennas.
Mizusawa, M.↗
The precision tracker
The precision tracker, a simultaneous lobing, amplitude-comparison, passive, continuous-wave tracker based in principle and design upon a monopulse tracking radar, is employed at the Andover, Maine, and Pleumeur-Bodou, France, stations to find the satellite and direct the horn-reflector antennas when required and, at regular intervals during subsequent passes, to provide the precise tracking data required for prediction of future orbital parameters.
ORBIT CALCULATION↗
The autotrack system
The autotrack system accurately senses the direction of arrival, at the horn-reflector antenna, of the microwave beacon signal from the communications satellite. When this direction does not coincide with the horn-reflector pointing direction, error correcting voltages are automatically generated to enable the antenna direction system to steer the antenna toward the satellite. This paper presents a simple analysis of error voltage generation, a description of the system, and a brief discussion of system performance. Measurements at Andover, Maine, have shown that an angular pointing error of less than 0.005 degree is maintained by the antenna when using the autotrack system to follow the Telstar communications satellite.
SATELLITE COMMUNICATION↗
Integrated Lens Antennas for Multi-Pixel Receivers
Future astrophysics and planetary experiments are expected to require large focal plane arrays with thousands of detectors. Feedhorns have excellent performance, but their mass, size, fabrication challenges, and expense become prohibitive for very large focal plane arrays. Most planar antenna designs produce broad beam patterns, and therefore require additional elements for efficient coupling to the telescope optics, such as substrate lenses or micromachined horns. An antenna array with integrated silicon microlenses that can be fabricated photolithographically effectively addresses these issues. This approach eliminates manual assembly of arrays of lenses and reduces assembly errors and tolerances. Moreover, an antenna array without metallic horns will reduce mass of any planetary instrument significantly. The design has a monolithic array of lens-coupled, leaky-wave antennas operating in the millimeter- and submillimeter-wave frequencies. Electromagnetic simulations show that the electromagnetic fields in such lens-coupled antennas are mostly confined in approximately 12 15 . This means that one needs to design a small-angle sector lens that is much easier to fabricate using standard lithographic techniques, instead of a full hyper-hemispherical lens. Moreover, this small-angle sector lens can be easily integrated with the antennas in an array for multi-pixel imager and receiver implementation. The leaky antenna is designed using double-slot irises and fed with TE10 waveguide mode. The lens implementation starts with a silicon substrate. Photoresist with appropriate thickness (optimized for the lens size) is spun on the substrate and then reflowed to get the desired lens structure. An antenna array integrated with individual lenses for higher directivity and excellent beam profile will go a long way in realizing multi-pixel arrays and imagers. This technology will enable a new generation of compact, low-mass, and highly efficient antenna arrays for use in multi-pixel receivers and imagers for future planetary and astronomical instruments. These antenna arrays can also be used in radars and imagers for contraband detection at stand-off distances. This will be enabling technology for future balloon-borne, smaller explorer class mission (SMEX), and other missions, and for a wide range of proposed planetary sounders and radars for planetary bodies.
Lee, Choonsup↗
Gain computations from pattern integration.
Correction for gain computations based on pattern integration during translational motion of antenna
ANTENNA FIELD↗
The Cosmology Large Angular Scale Surveyor (CLASS): 40 GHz Optical Design
The Cosmology Large Angular Scale Surveyor (CLASS) instrument will measure the polarization of the cosmic microwave background at 40, 90, and 150 GHz from Cerro Toco in the Atacama desert of northern Chile. In this paper, we describe the optical design of the 40 GHz telescope system. The telescope is a diffraction limited catadioptric design consisting of a front-end Variable-delay Polarization Modulator (VPM), two ambient temperature mirrors, two cryogenic dielectric lenses, thermal blocking filters, and an array of 36 smooth-wall scalar feedhorn antennas. The feed horns guide the signal to antenna-coupled transition-edge sensor (TES) bolometers. Polarization diplexing and bandpass definition are handled on the same microchip as the TES. The feed horn beams are truncated with 10 dB edge taper by a 4 K Lyot-stop to limit detector loading from stray light and control the edge illumination of the front-end VPM. The field-of-view is 19 deg x 14 deg with a resolution for each beam on the sky of 1.5 deg. FWHM.
Eimer, Joseph R.↗
Thickness measurement system
An FM radar for the measurement of coal thickness wherein an FM transmitter is modulated by the combination of two signals; One, for example, could be a frequency of 100 Hz, and the other a frequency of 15 Hz. A horn-type antenna is used which is filled with a material having a dielectric constant approximating that of coal.
Barr, T. A.↗
High-power dual-directional coupler
Water-cooled coupler installed in S-band polarization diversity (SPD) cone is used to calibrate receiving-station relay. Coupler operates without arcing at 400 kw and permits accurate calibration of entire system below antenna feed horn. Device has good directivity, contributes less than 0.01 K to system noise temperature, and eliminates saturation of ground station and spacecraft receivers during high-power operation.
Otoshi, T. Y.↗
Deployable M-Braced Truss
Tension/compression and shear separated structurally in deployable beam. M-Braced Sections Packaged using combination of hinges and telescoping sections. When upper sections telescope into base, diagonals hinge, telescope, and rotate along batten. Components of M-braced truss fabricated from conventional metallic materials or nonmetallic materials such as graphite/epoxy. Applications include masts for antenna feed horns and ribs for solar array blankets.
Mikulas, M. M., Jr.↗
Feasiblity study for a 34 GHz (Ka band) gyroamplifier
The feasibility of using a gyroklystron power tube as the final amplifier in a 400 kW CW 34 GHz transmitter on the Goldstone Antenna is investigated. A conceptual design of the gyroklystron and the transmission line connecting it with the antenna feed horn is presented. The performance characteristics of the tube and transmission line are compared to the transmitter requirements for a deep space radar system. Areas of technical risk for a follow-on hardware development program for the gyroklystron amplifier and overmoded transmission line components are discussed.
Stone, D. S.↗
Application of pushbroom altimetry from space using large space antennas
The capabilities of multibeam altimetry are discussed and an interferometric multibeam technique for doing precision altimetry is described. The antenna feed horn arrangement and the resulting footprint lube pattern are illustrated. Plans for a shuttle multibeam altimetry mission are also discussed.
Parsons, C. L.↗
Study of optical output couplers for submillimeter wavelength backward-wave oscillators (BWO's)
The machining of slow wave structures for high frequency backward-wave oscillators (BWO) is extremely difficult beyond 1 THz. Recently a microfabrication technique using photolithography and ion-beam assisted etching has been used to construct a prototype BWO operating at 200 to 265 GHz. The output coupler for such tubes remains a problem. Waveguides do not exist or are very lossy at the frequencies of interest (300 to 2000 GHz). This paper discusses several scaled experiments of optical output couplers for submillimeter BWOs. Various designs of planar antennas (Vivaldi horns) and lens-feed systems (Hyperhemispherical lens) were constructed and tested between 20 and 100 GHz using a spectrum analyzer. The lens system was also tested at 337 GHz using a CO2 pumped FIR laser.
Cook, Jerry D.↗