SEARCH · Search NASA

Results for “Harmonic numbers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

All sources NASA NTRS DOE OSTI

NASA NTRS1977

Impact on multilayered composite plates

Stress wave propagation in a multilayer composite plate due to impact was examined by means of the anisotropic elasticity theory. The plate was modelled as a number of identical anisotropic layers and the approximate plate theory of Mindlin was then applied to each layer to obtain a set of difference-differential equations of motion. Dispersion relations for harmonic waves and correction factors were found. The governing equations were reduced to difference equations via integral transforms. With given impact boundary conditions these equations were solved for an arbitrary number of layers in the plate and the transient propagation of waves was calculated by means of a Fast Fourier Transform algorithm. The multilayered plate problem was extended to examine the effect of damping layers present between two elastic layers. A reduction of the interlaminar normal stress was significant when the thickness of damping layer was increased but the effect was mostly due to the softness of the damping layer. Finally, the problem of a composite plate with a crack on the interlaminar boundary was formulated.

Kim, B. S.↗

NASA NTRS1976

The gravity field of Jupiter

Preliminary analysis of two-way Doppler data from Pioneers 10 and 11 has provided the first detailed model of the Jovian gravity field. A review of the determination of the zonal harmonic coefficients through the sixth degree is presented, and the results are used to derive a number of geodetic parameters in the atmospheric region of the planet. On a level surface at a pressure of one bar, the net acceleration due to gravity is found to vary from a maximum of 2707 cm/sec squared at the poles to a minimum of 2322 cm/sec squared at the equator. The large dynamical flattening at the one-bar level produces a significant deviation of the local vertical from the Jovicentric radius vector. The angular difference is as much as 3.83 degrees of arc in the high temperature zones of the planet. These considerations are important for the accurate modeling of the atmosphere of Jupiter and for the interpretation of occultation data.

Anderson, J. D.↗

NASA NTRS1992

Approaches to ionospheric modelling, simulation and prediction

The ionosphere is a complex, multispecies, anisotropic medium that exhibits a significant variation with time, space, season, solar cycle, and geomagnetic activity. In recent years, a wide range of models have been developed in an effort to describe ionospheric behavior. The modeling efforts include: (1) empirical models based on extensive worldwide data sets; (2) simple analytical models for a restricted number of ionospheric parameters; (3) comprehensive, 3D, time-dependent models that require supercomputers; (4) spherical harmonic models based on fits to output obtained from comprehensive numerical models; and (5) ionospheric models driven by real-time magnetospheric inputs. In an effort to achieve simplicity, some of the models have been restricted to certain altitude or latitude domains, while others have been restricted to certain ionospheric parameters, such as the F-region peak density, the auroral conductivity, and the plasma temperatures. The current status of the modeling efforts is reviewed.

Schunk, R. W.↗

NASA NTRS2011

Dynamic Shape Reconstruction of Three-Dimensional Frame Structures Using the Inverse Finite Element Method

A robust and efficient computational method for reconstructing the three-dimensional displacement field of truss, beam, and frame structures, using measured surface-strain data, is presented. Known as shape sensing , this inverse problem has important implications for real-time actuation and control of smart structures, and for monitoring of structural integrity. The present formulation, based on the inverse Finite Element Method (iFEM), uses a least-squares variational principle involving strain measures of Timoshenko theory for stretching, torsion, bending, and transverse shear. Two inverse-frame finite elements are derived using interdependent interpolations whose interior degrees-of-freedom are condensed out at the element level. In addition, relationships between the order of kinematic-element interpolations and the number of required strain gauges are established. As an example problem, a thin-walled, circular cross-section cantilevered beam subjected to harmonic excitations in the presence of structural damping is modeled using iFEM; where, to simulate strain-gauge values and to provide reference displacements, a high-fidelity MSC/NASTRAN shell finite element model is used. Examples of low and high-frequency dynamic motion are analyzed and the solution accuracy examined with respect to various levels of discretization and the number of strain gauges.

Gherlone, Marco↗

NASA NTRS2018

Electric Motor Noise from Small Quadcopters: Part II - Source Characteristics

The increased interest in electric motors for aircraft propulsion systems has driven interest in quantifying the contribution of electric motor noise to the overall sound levels and possibly human annoyance of the propulsion system. This work presents acoustic measurements of electric motors used for small quadcopters to quantify the sound produced by a number of outrunner motors with different types of controllers. Results are presented for loaded and unloaded motors as well as installed and uninstalled configurations. Motor resonance frequencies were measured and computed. Current probe measurements showed significant harmonic content in the supply current from the controllers for both the conventional and sinewave controllers. Acoustic results showed motor noise is typically radiated at frequencies near that for azimuthal vibration mode number 2 of the rotor which occurs at roughly 5000 Hz. Electric motor noise was evident in the spectra produced by many of the motor-controller combinations for motors loaded with propellers with levels often greater than those for the motor alone due to increases in the stator magnetic flux density with increased current. An installed quadcopter configuration produced increases in acoustic radiation over that of the uninstalled motor in a frequency range near the 1200 Hz azimuthal vibration mode 1 of the rotor.

Henderson, Brenda↗

NASA NTRS1972

On the determination of the long period tidal perturbations in the elements of artificial earth satellites

The magnitude of the tidal effects depends upon the elastic properties of the earth as described by Love numbers. The Love numbers appear as the coefficients in the expansion of the exterior tidal potential in terms of spherical harmonics (in Maxwellian form). A single averaging process was performed only along the parallels of latitude. This process preserves additional long period tidal effects (with periods of a few days or more). It also eliminates the short period effects with periods of one day or less.

Musen, P.↗

NASA NTRS1985

Calculation of transonic steady and oscillatory pressures on a low aspect ratio model and comparison with experiment

Pressure data measured by the British Royal Aircraft Establishment for the AGARD SMP tailplane are compared with results calculated using the transonic small perturbation code XTRAN3S. A brief description of the analysis is given and a recently developed finite difference grid is described. Results are presented for five steady and nine harmonically oscillating cases near zero angle of attack and for a range of subsonic and transonic Mach numbers.

Bennett, R. M.↗

NASA NTRS1984

The influence of dynamic inflow and torsional flexibility on rotor damping in forward flight from symbolically generated equations

The combined effects of blade torsion and dynamic inflow on the aeroelastic stability of an elastic rotor blade in forward flight are studied. The Helicopter Equations for Stability and Loads (HESL) program is extended to derive the governing equations of motion for the blade, and a Lagrangian formulation is used to obtain the equations in generalized coordinates. The program generates the steady-state and linearized perturbation equations in symbolic form and then codes them into FORTRAN subroutines. The coefficients for each equation and for each mode are identified through a numerical program; the latter can also be used to obtain the harmonic balance equations. The governing multiblade equations are derived explicitly using HESL. These equations can accommodate any number of elastic blade modes. Stability results are presented for several hingeless rotor blade structural models, and the influence of dynamic inflow in forward flight with an elastic hingeless rotor is investigated.

Reddy, T. S. R.↗

NASA NTRS1985

Calculation of transonic steady and oscillatory pressures on a low aspect ratio model and comparison with experiment

Bennett, R. M.↗

NASA NTRS1990

Conical Euler solution for a highly-swept delta wing undergoing wing-rock motion

Modifications to an unsteady conical Euler code for the free-to-roll analysis of highly-swept delta wings are described. The modifications involve the addition of the rolling rigid-body equation of motion for its simultaneous time-integration with the governing flow equations. The flow solver utilized in the Euler code includes a multistage Runge-Kutta time-stepping scheme which uses a finite-volume spatial discretization on an unstructured mesh made up of triangles. Steady and unsteady results are presented for a 75 deg swept delta wing at a freestream Mach number of 1.2 and an angle of attack of 30 deg. The unsteady results consist of forced harmonic and free-to-roll calculations. The free-to-roll case exhibits a wing rock response produced by unsteady aerodynamics consistent with the aerodynamics of the forced harmonic results. Similarities are shown with a wing-rock time history from a low-speed wind tunnel test.

Lee, Elizabeth M.↗

NASA NTRS1990

Conical Euler simulation and active suppression of delta wing rocking motion

A conical Euler code was developed to study unsteady vortex-dominated flows about rolling highly-swept delta wings, undergoing either forced or free-to-roll motions including active roll suppression. The flow solver of the code involves a multistage Runge-Kutta time-stepping scheme which uses a finite volume spatial discretization of the Euler equations on an unstructured grid of triangles. The code allows for the additional analysis of the free-to-roll case, by including the rigid-body equation of motion for its simultaneous time integration with the governing flow equations. Results are presented for a 75 deg swept sharp leading edge delta wing at a freestream Mach number of 1.2 and at alpha equal to 10 and 30 deg angle of attack. A forced harmonic analysis indicates that the rolling moment coefficient provides: (1) a positive damping at the lower angle of attack equal to 10 deg, which is verified in a free-to-roll calculation; (2) a negative damping at the higher angle of attack equal to 30 deg at the small roll amplitudes. A free-to-roll calculation for the latter case produces an initially divergent response, but as the amplitude of motion grows with time, the response transitions to a wing-rock type of limit cycle oscillation. The wing rocking motion may be actively suppressed, however, through the use of a rate-feedback control law and antisymmetrically deflected leading edge flaps. The descriptions of the conical Euler flow solver and the free-to-roll analysis are presented. Results are also presented which give insight into the flow physics associated with unsteady vortical flows about forced and free-to-roll delta wings, including the active roll suppression of this wing-rock phenomenon.

Lee, Elizabeth M.↗

NASA NTRS2010

A New Representative for Small-Body Gravity Estimation

One of the options proposed in the 2009 Review of the U. S. Human Spaceflight Plans Committee calls for the consideration of robotic and human missions to asteroids. Beginning in 2000, the NEAR Shoemaker spacecraft inserted into orbit about the asteroid 433 Eros, and studied it for a year before landing. The Hayabusa satellite journeyed to 25143 Itokawa, and operated in a proximity of the asteroid for several months before landing to collect a return sample. Additionally, the DAWN satellite, which was launched in 2007, will explore the dwarf-planet Ceres and the asteroid 4 Vesta in the next three years. These are just several examples of current interests in exploring asteroids. In this paper, we explore an alternative for estimating the gravity field of a small body using observations of an orbiting satellite. Our approach uses two new mathematical tools, the quadratures (on a sphere) invariant under the icosahedral group, and a multiresolution representation of the gravity potential. With the near optimal quadratures on the sphere, we minimize the number of parameters needed to recover a function. Also, instead of estimating the coefficients of the spherical harmonics, the new quadratures allow us to estimate directly the values of the gravity field since they offer an analogue of the Lagrange-type interpolation.

Jones, Brandon A.↗

NASA NTRS1978

On the optimization of discrete structures with aeroelastic constraints

The paper deals with the problem of dynamic structural optimization where constraints relating to flutter of a wing (or other dynamic aeroelastic performance) are imposed along with conditions of a more conventional nature such as those relating to stress under load, deflection, minimum dimensions of structural elements, etc. The discussion is limited to a flutter problem for a linear system with a finite number of degrees of freedom and a single constraint involving aeroelastic stability, and the structure motion is assumed to be a simple harmonic time function. Three search schemes are applied to the minimum-weight redesign of a particular wing: the first scheme relies on the method of feasible directions, while the other two are derived from necessary conditions for a local optimum so that they can be referred to as optimality-criteria schemes. The results suggest that a heuristic redesign algorithm involving an optimality criterion may be best suited for treating multiple constraints with large numbers of design variables.

Mcintosh, S. C., Jr.↗

NASA NTRS1973

The effect of angle of attach on the buckling of Mars entry aeroshells

The buckling modes of four optimized Mars entry aeroshell configurations at angle-of-attack loadings have been calculated. The analysis is based on experimental pressure distributions and was performed with the aid of a buckling digital computer program which treats general asymmetric linearized prebuckling states of branched shells of revolution. Only zero and first harmonic pressure components are treated, these being constructed from windward and leeward meridian pressure data at a mach number of 4.63. The results showed a rather small effect of the unsymmetrical pressure component on buckling for angles of attack up to 15 deg. Comparison of the results for the 120 deg cones to previous results indicates that the common procedure of basing the design on a symmetrized pressure distribution of the windward meridian is a conservative approach.

Cohen, G. A.↗

NASA NTRS1981

N-stream approximations to radiative transfer

Schuster's two-stream approximation (1905) is first derived from Chandrasekhar's radiative transfer equation (1950), and then extended to an arbitrary number of streams. The resulting technique for solving the transfer function similar to the discrete ordinate and spherical harmonic methods, is useful for modeling atmospheres with complicated phase functions and moderate optical depths. The resulting n coupled linear differential equations are simple and consume less computer time than other approximations, yet have the same required accuracy. The approximation is also flexible with respect to the choice of patch functions, and no approximations are made on the form of the phase function, other than its expansion into Legendre polynomials. A four-stream approximation is evaluated for a Henyey-Greenstein phase function with an asymmetry factor equal to 0.5.

Acquista, C.↗

NASA NTRS1986

Effect of a wind tunnel on the acoustic field from various aeroacoustic sources

The effects of the walls of an enclosed test section wind tunnel on measurements of sound fields from various sources has been studied. The acoustic field from a known source in a wind tunnel has been modeled as an infinitely long duct with constant cross section. The model was solved with a numerical panel technique in a control volume near the source, and matched to an outer analytic solution. Several sample problems were studied in a rectangular duct with and without flow. The results indicate that the presence of the duct affects the acoustic field, and that small changes in the product of duct cross dimensions and the source wave number can change the acoustic field significantly. It is also shown that, for low-frequency helicopter rotor harmonic noise, measured in typical wind tunnel rotor tests, the sound levels beyond one rotor diameter from the hub are unreliable indications of the free-field sound levels.

Mosher, M.↗

NASA NTRS1988

Measurement of Unsteady Blade Surface Pressure on a Single Rotation Large Scale Advanced Prop-fan with Angular and Wake Inflow at Mach Numbers from 0.02 to 0.70

Unsteady blade surface pressure data for the Large-Scale Advanced Prop-Fan (LAP) blade operation with angular inflow, wake inflow and uniform flow over a range of inflow Mach numbers of 0.02 to 0.70 is provided. The data are presented as Fourier coefficients for the first 35 harmonics of shaft rotational frequency. Also presented is a brief discussion of the unsteady blade response observed at takeoff and cruise conditions with angular and wake inflow.

Bushnell, P.↗

NASA NTRS1991

Conical Euler methodology for unsteady vortical flows about rolling delta wings

A conical Euler methodology was developed to study unsteady vortex-dominated flows about rolling highly swept delta wings undergoing either forced or free-to-roll motions. The flow solver of the code involves a multistage Runge-Kutta time-stepping scheme which uses a finite-volume spatial discretization of the Euler equations on an unstructured grid of triangles. Results are presented for a 75-deg swept sharp-leading-edge delta wing at a freestream Mach number of 1.2 and at alpha = 10, 20, and 30 deg. At the 10 and 20 deg, forced harmonic analyses indicate that the rolling moment coefficients provide a positive damping which is verified by free-to-roll calculations. In contrast, at 30 deg, a forced harmonic analysis indicates that the rolling moment coefficient provides a negative damping at the small roll amplitudes. A free-to-roll calculation for this case produces an initially divergent response, but as the amplitude of motion grows with time, the response transitions to a wing-rock type of limit cycle oscillation.

Lee, Elizabeth M.↗