Search NASA⌕ Search

SEARCH · Search NASA

Results for “High Temperature Radiator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Bulk Micromachined 6H-SiC High-g Piezoresistive Accelerometer Fabricated and Tested

High-g accelerometers are needed in certain applications, such as in the study and analysis of high-g impact landings and projectiles. Also, these accelerometers must survive the high electromagnetic fields associated with the all-electric vehicle technology needed for aerospace applications. The choice of SiC is largely due to its excellent thermomechanical properties over conventional silicon-based accelerometers, whose material properties inhibit applicability in high electromagnetic radiation and high temperatures (>150 C) unless more complex and sometimes costly packaging schemes are adopted. This work was the outcome of a NASA Glenn Research Center summer internship program, in collaboration with Cornell University and the Munitions Directorate of the U.S. Air Force in Eglin, Florida. It aimed to provide the enabling technology infrastructure (modeling, fabrication, and validation) for the implementation of SiC accelerometers designed specifically for harsh environments.

Okojie, Robert S.↗
NASA NTRS1995

Applications of Silicon Carbide for High Temperature Electronics and Sensors

Silicon carbide (SiC) is a wide bandgap material that shows great promise in high-power and high temperature electronics applications because of its high thermal conductivity and high breakdown electrical field. The excellent physical and electronic properties of SiC allows the fabrication of devices that can operate at higher temperatures and power levels than devices produced from either silicon or GaAs. Although modern electronics depends primarily upon silicon based devices, this material is not capable of handling may special requirements. Devices which operate at high speeds, at high power levels and are to be used in extreme environments at high temperatures and high radiation levels need other materials with wider bandgaps than that of silicon. Many space and terrestrial applications also have a requirement for wide bandgap materials. SiC also has great potential for high power and frequency operation due to a high saturated drift velocity. The wide bandgap allows for unique optoelectronic applications, that include blue light emitting diodes and ultraviolet photodetectors. New areas involving gas sensing and telecommunications offer significant promise. Overall, the properties of SiC make it one of the best prospects for extending the capabilities and operational regimes of the current semiconductor device technology.

Silicon Carbide↗
NASA NTRS2005

Lightweight Thermal Insulation for a Liquid-Oxygen Tank

A proposed lightweight, reusable thermal-insulation blanket has been designed for application to a tank containing liquid oxygen, in place of a non-reusable spray-on insulating foam. The blanket would be of the multilayer-insulation (MLI) type and equipped with a pressure-regulated nitrogen purge system. The blanket would contain 16 layers in two 8-layer sub-blankets. Double-aluminized polyimide 0.3 mil (.0.008 mm) thick was selected as a reflective shield material because of its compatibility with oxygen and its ability to withstand ionizing radiation and high temperature. The inner and outer sub-blanket layers, 1 mil (approximately equals 0.025 mm) and 3 mils (approximately equals 0.076 mm) thick, respectively, would be made of the double-aluminized polyimide reinforced with aramid. The inner and outer layers would provide structural support for the more fragile layers between them and would bear the insulation-to-tank attachment loads. The layers would be spaced apart by lightweight, low-thermal-conductance netting made from polyethylene terephthalate.

Willen, G. Scott↗
NASA NTRS2015

A NASA First in Nano-Technology: Nanoscale Vacuum Tube for Radiation Immune Electronics

Vacuum provides the fastest electron speed, better than any semiconductor. Nevertheless vacuum tubes were bulky, fragile and consumed much power. Now nanotechnology has enabled fabrication of vacuum tubes at nanoscale in silicon chips. The speed, immunity to radiation and high temperature operation are expected to revolutionize space electronics.

Ingrid Desilestre↗
NASA NTRSDate not supplied

Materials and technologies for interstellar flights and intra-galactic spread of life

Small automated spaceships are capable to deliver seeds, frozen ova and gametes to other planetary systems. A spaceship can be equipped with a freezer containing reproductive cells, an artificial uterus, a robotic nursery and school, and a collection of instruments and equipment. The whole spaceship will be frozen during a long interstellar flight. Approaching another star, a spaceship will generate electricity from light, warm up, slow down and land on a suitable planet (if any), give birth to a human, provide care and education. After schooling, the human will vacate the spaceship and either build more space for living (using local materials) or die. A vacant spaceship will supply more people, one at a time. Hopefully, they will collectively create a sustainable colony on a remote planet. Our Milky Way galaxy has hundreds billion stars (i.e., more stars than humans on Earth). Mass production of spacecrafts for intragalactic spread of life will make each spaceship cheaper, will improve employment and purposeful production on Earth, and will spread human life beyond the Solar System. If any spaceship will miss its target stellar system, it will fly to the next one, retaining ability to bring life to another planet. Which materials and technologies are needed for the interstellar life propagation? Materials age during a long interstellar flight, which can last from 10^4 to 10^10 years. We evaluate the computational methods (such as C2NEB, available from https://lib.dr.iastate.edu/ameslab_software/1) that are suitable for addressing materials aging at low temperatures and high radiation levels during the appropriately long-time scales.

Technologies↗
NASA NTRS2018

All-Metal Dual Frequency RHCP High Gain Antenna for the Extreme Environments of a Potential Europa Lander

A new all-metal dual-frequency RHCP high gain antenna is under development at NASA’s Jet Propulsion Laboratory for a potential Europa Lander. The antenna is mainly made of metal so it could survive the harsh environment conditions (i.e. very low temperature and high radiation and ESD levels). The antenna is also flat to meet drastic volume constraints and has efficiencies higher than 80% at both the uplink and downlink X-band Deep Space frequency bands. This antenna is a key component for the potential mission enabling Direct Link to Earth (DTE) from and Direct-from-Earth (DFE) to the lander without any relay.

Estabrook, Polly↗
NASA NTRS2019

All-metal dual frequency RHCP high gain antenna for the extreme environments of a potential Europa Lander

A new all-metal dual-frequency RHCP high gain antenna is under development at NASA’s Jet Propulsion Laboratory for a potential Europa Lander. The antenna is mainly made of metal so it could survive the harsh environment conditions of Europa (i.e. very low temperature and high radiation and ESD levels). The antenna is flat to meet drastic volume constraints and has efficiencies higher than 80% at both the uplink and downlink X-band Deep Space frequency bands. This antenna is a key component for the potential mission enabling Direct Link to Earth (DTE) without any relying on an Orbiter to relay the data.

Chahat, Nacer↗
NASA NTRS2019

Large all-Metal Dual-Frequency Circularly Polarized High Gain Antenna for potential Europa Lander

A new all-metal dual-frequency RHCP high gain antenna is under development at NASA’s Jet Propulsion Laboratory for a potential Europa Lander. The antenna is mainly made of metal so it could survive the harsh environment conditions (i.e. very low temperature and high radiation and ESD levels). The antenna is also flat to meet drastic volume constraints and has efficiencies higher than 80% at both the uplink and downlink X-band Deep Space frequency bands. This antenna is a key component for the potential mission enabling Direct Link to Earth (DTE) from and Direct-from-Earth (DFE) to the lander without any relay.

Estabrook, Polly↗
NASA NTRSDate not supplied

Modeling Entry Systems to Explore Our Solar System

Exploration of our Solar System is a foundational element of NASA’s identity. Delivering a scientific payload through an atmosphere to the surface of a planetary body requires safely navigating the extreme temperatures and stresses generated by flying many times the speed of sound. An entry system is the outer shell of a vehicle designed to protect the payload and, as a single point of failure for a mission, reliability is paramount. Unfortunately, it is not possible to fully replicate the flight environment in ground test facilities – so how do we confidently design a vehicle that needs to work the first time, every time? Modeling and simulation are critical tools for filling gaps in ground test capability and providing traceability from ground to flight. Modeling an entry system is a truly interdisciplinary effort, requiring knowledge of fluid dynamics, high-temperature chemistry, radiation, materials science, structural dynamics, guidance and control – and, finally, the mathematical and computing capability to pull it all together. In this talk, Dr. Michael Barnhardt will discuss the latest research in modeling entry systems and how it is being used in NASA’s exploration missions.

Entry systems↗
NASA NTRS2025

The Shape Effect: Influence of 1D and 2D Boron Nitride Nanostructures on the Radiation Shielding, Thermal, and Damping Properties of High-Temperature Epoxy Composites

In space exploration, lightweight multifunctional materials capable of shielding neutron radiation, dissipating heat, and providing damping are essential. Polymer composites reinforced with boron nitride (BN) nanomaterials—specifically one-dimensional boron nitride nanotubes (BNNTs) and two-dimensional boron nitride nanoplatelets (BNNPs)—offer promising solutions. This study investigates how BN nanomaterial morphology influences the performance of high-temperature (HT) epoxy composites. We developed ultralightweight, three-dimensional BN foams comprising 1D BNNTs, 2D BNNPs, and hybrid 1D BNNT/2D BNNP structures via freeze-drying, then infiltrated them with HT epoxy to form dense composites. The BNNT foam exhibited the highest neutron radiation shielding, with a mass absorption coefficient of 26.64 cm2 g −1 , outperforming the hybrid foam (18.18 cm 2 g −1 ) and the BNNP foam (11.12 cm 2 g −1 ). A similar trend was observed in the HT epoxy composites; incorporating these foams at least doubled the mass absorption coefficient compared to the neat polymer. In terms of thermal conductivity, the BNNT/BNNP foam-epoxy composite achieved the highest value of 0.34 W m −1 K −1 , a 2.13-fold increase over neat HT epoxy. The BNNT/BNNP foam-epoxy composites also improved by 1.88 and 1.75 times, respectively. Mechanical testing revealed that BNNP foams withstood the highest loads during nanoindentation (3.53 kN), followed by BNNT/BNNP foams (1.93 kN) and BNNT foams (1.56 kN). All BN foam-epoxy composites exhibited enhanced damping properties, with tan δ increasing by at least 30 % compared to neat HT epoxy. These findings elucidate the impact of BN nanomaterial morphology on the multifunctional performance of HT epoxy composites, offering insights for developing high-performance, tailorable materials for demanding environments.

Kazue Orikasa↗
NASA NTRS2010

Study - Radiation Shielding Effectiveness of the Prototyped High Temperature Superconductivity (HTS) 'Artificial' Magnetosphere for Deep Space Missions

The high temperature superconductor (HTS) is being used to develop the magnets for the Variable Specific Impulse Magneto-plasma Rocket (VASIMR ) propulsion system and may provide lightweight magnetic radiation shielding to protect spacecraft crews from radiation caused by GCR and SPEs on missions to Mars. A study is being planned to assess the radiation shielding effectiveness of the artificial magnetosphere produced by the HTS magnet. VASIMR is an advanced technology propulsion engine which is being touted as enabling one way transit to Mars in 90 days or less. This is extremely important to NASA. This technology would enable a significant reduction in the number of days in transit to and from Mars and significantly reduce the astronauts exposure to a major threat - high energy particles from solar storms and GCR during long term deep space missions. This paper summarizes the plans for the study and the subsequent testing of the VASIMR technology onboard the ISS slated for 2013.

Denkins, Pamela↗
NASA NTRS1981

Towards a high-temperature solar electric converter

The concept of an ultrahigh-temperature solar electric heat-engine converter is examined in which an alkali plasma would serve as both the high-temperature collector of solar radiation and as the working fluid for a high-temperature working cycle. The working cycle would be a simple magnetohydrodynamic Rankine cycle. Theoretical and experimental results obtained to date are summarized. These include: (1) an experimental confirmation of the theoretical prediction that a plasma temperature of about 2800 K can be reached through heating cesium vapor by sunlight concentrated to approximately 300 W per sq cm; and (2) the establishment of a theoretical model of the complete solar heated plasma magnetohydrodynamic cycle.

Dunning, G. J.↗
NASA NTRS1979

Optical absorption and radiative heat transport in olivine at high temperature

Results are presented of measurements of the optical absorption spectra (300-8000 nm) of olivine as a function of temperature (300-1700 K) under conditions of controlled and known oxygen fugacity within the stability field of the samples. The absorption spectra are used to calculate the temperature-dependent radiative transfer coefficient of olivine and to numerically study the accuracy of the method. The present absorption measurements in olivine under oxidizing conditions known to be within the olivine stability field indicate that the effective radiative conductivity K(R) is lower than that obtained in previous studies under different experimental conditions. The lower value of K(R) makes it more likely that some of the earth's internal heat is removed by convection and less likely that thermal models involving conduction and radiation alone will satisfactorily explain thermal conditions in the earth's mantle.

Shankland, T. J.↗
NASA NTRS1991

Burst annealing of high temperature GaAs solar cells

One of the major limitations of solar cells in space power systems is their vulnerability to radiation damage. One solution to this problem is to periodically heat the cells to anneal the radiation damage. Annealing was demonstrated with silicon cells. The obstacle to annealing of GaAs cells was their susceptibility to thermal damage at the temperatures required to completely anneal the radiation damage. GaAs cells with high temperature contacts and encapsulation were developed. The cells tested are designed for concentrator use at 30 suns AMO. The circular active area is 2.5 mm in diameter for an area of 0.05 sq cm. Typical one sun AMO efficiency of these cells is over 18 percent. The cells were demonstrated to be resistant to damage after thermal excursions in excess of 600 C. This high temperature tolerance should allow these cells to survive the annealing of radiation damage. A limited set of experiments were devised to investigate the feasibility of annealing these high temperature cells. The effect of repeated cycles of electron and proton irradiation was tested. The damage mechanisms were analyzed. Limitations in annealing recovery suggested improvements in cell design for more complete recovery. These preliminary experiments also indicate the need for further study to isolate damage mechanisms. The primary objective of the experiments was to demonstrate and quantify the annealing behavior of high temperature GaAs cells. Secondary objectives were to measure the radiation degradation and to determine the effect of repeated irradiation and anneal cycles.

Brothers, P. R.↗
NASA NTRS1996

Silicon Carbide Epitaxial Films Studied by Atomic Force Microscopy

Silicon carbide (SiC) holds great potential as an electronic material because of its wide band gap energy, high breakdown electric field, thermal stability, and resistance to radiation damage. Possible aerospace applications of high-temperature, high-power, or high-radiation SiC electronic devices include sensors, control electronics, and power electronics that can operate at temperatures up to 600 C and beyond. Commercially available SiC devices now include blue light-emitting diodes (LED's) and high-voltage diodes for operation up to 350 C, with other devices under development. At present, morphological defects in epitaxially grown SiC films limit their use in device applications. Research geared toward reducing the number of structural inhomogeneities can benefit from an understanding of the type and nature of problems that cause defects. The Atomic Force Microscope (AFM) has proven to be a useful tool in characterizing defects present on the surface of SiC epitaxial films. The in-house High-Temperature Integrated Electronics and Sensors (HTIES) Program at the NASA Lewis Research Center not only extended the dopant concentration range achievable in epitaxial SiC films, but it reduced the concentration of some types of defects. Advanced structural characterization using the AFM was warranted to identify the type and structure of the remaining film defects and morphological inhomogeneities. The AFM can give quantitative information on surface topography down to molecular scales. Acquired, in part, in support of the Advanced High Temperature Engine Materials Technology Program (HITEMP), the AFM had been used previously to detect partial fiber debonding in composite material cross sections. Atomic force microscopy examination of epitaxial SiC film surfaces revealed molecular-scale details of some unwanted surface features. Growth pits propagating from defects in the substrate, and hillocks due, presumably, to existing screw dislocations in the substrates, were imaged. Away from local defects, step bunching was observed to yield step heights of hundreds of angstroms, with possible implications for the uniformity of dopants incorporated in SiC devices during fabrication. The quantitative topographic data from the AFM allow the relevant defect information to be extracted, such as the size and distribution of step bunching and the Burgers vector of screw dislocations. These atomic force microscopy results have furthered the understanding of the dynamic epitaxial SiC growth process. A model describing the observed hillock step bunching has been proposed. This cooperation between researchers involved in crystal growth, electronic device fabrication, and surface structural characterization is likely to continue as atomic force microscopy is used to improve SiC films for high-temperature electronic devices for NASA's advanced turbine engines and space power devices, as well as for future applications in the automotive industry.

Source record↗
NASA NTRS1980

Study of radiatively sustained cesium plasmas for solar energy conversion

The results of a study aimed at developing a high temperature solar electric converter are reported. The converter concept is based on the use of an alkali plasma to serve as both an efficient high temperature collector of solar radiation as well as the working fluid for a high temperature working cycle. The working cycle is a simple magnetohydrodynamic (MHD) Rankine cycle employing a solid electrode Faraday MHD channel. Research milestones include the construction of a theoretical model for coupling sunlight in a cesium plasma and the experimental demonstration of cesium plasma heating with a solar simulator in excellent agreement with the theory. Analysis of a solar MHD working cycle in which excimer laser power rather than electric power is extracted is also presented. The analysis predicts a positive gain coefficient on the cesium-xenon excimer laser transition.

Palmer, A. J.↗
NASA NTRS1985

Thermal history of shock-compressed solids

An isotropic, heterogeneous, viscous thermoplastic model of the uniaxially shock-compressed state in transparent solids is examined with a view to determining the conditions under which this radiation may be nominally thermal or nonthermal. Regions of locally high temperatures producing thermal radiation may develop only where the local viscosity is low and the Maxwell time is short; alternatively, regions of low elastic moduli and long Maxwell time could experience sustained elastic deformation, leading to microfracture and triboluminescence. Attention is given to the cases of MgO and SiO2.

Svendsen, B.↗