Search NASA⌕ Search

SEARCH · Search NASA

Results for “High density carbon”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Fiber-Shaped Fluidic Nanogenerator with High Power Density for Self-Powered Integrated Electronics

Flow-based hydrovoltaic nanogenerators have attracted particular attention as efficient and facile miniature energy-harvesting devices. However, they deliver relatively low output power density and limited power conversion efficiency owing to inefficient charge separation and poor charge accumulation. Here, we report the fabrication of high-performance, fiber-shaped fluidic nanogenerators (FFNGs) that use MoS 2 -encapsulated C fibers. The FFNGs deliver stable output voltages of 540 mV and an ultrahigh power density of 10.8 W m -2 . With experiments and density functional theory calculations, improvements in output performance can be attributed to smaller energy requirements for Na + cation adsorption, increased charge separation, and diffusion layer formations on the near surface. Moreover, self-powered, integrated devices achieve a maximum total power conversion-storage efficiency of ~11% and stable output voltage up to 3.1 V, which is applicable for use in consumer electronics devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1921

A New Method of Testing in Wind Tunnels

Now, in existing wind tunnels, using a horsepower of 100 to 300, the models are generally made to a 1/10 scale and the speed is appreciably lower than the speeds currently attained by airplanes. The Reynolds number realized is thus 15 to 25 times smaller than that reached by airplanes in free flight, while the ratio of speed to the velocity of sound is between a third and three quarters of the true ratio. The necessary increases in either the diameter of the wind tunnel or the velocity of the airstream are too costly. However, the author shows that it is possible to have wind tunnels in which the Reynolds number will be greater than that now obtained by airplanes, and in which the ratio of the velocity to the velocity of sound will also be greater than that realized in practice, by employing a gas other than air, at a pressure and temperature different from those of the surrounding atmosphere. The gas is carbonic acid, a gas having a low coefficient of viscosity, high density, and a low ratio of specific heat. The positive results of using carbonic acid in wind tunnel tests are given.

Margoulis, W↗
NASA NTRS1997

Mechanical Characterization and Micromechanical Modeling of Woven Carbon/Copper Composites

The present investigation examines the in-plane mechanical behavior of a particular woven metal matrix composite (MMC); 8-harness (8H) satin carbon/copper (C/Cu). This is accomplished via mechanical testing as well as micromechanical modeling. While the literature is replete with experimental and modeling efforts for woven and braided polymer matrix composites, little work has been done on woven and braided MMC's. Thus, the development and understanding of woven MMC's is at an early stage. 8H satin C/Cu owes its existence to the high thermal conductivity of copper and low density and thermal expansion of carbon fibers. It is a candidate material for high heat flux applications, such as space power radiator panels. The experimental portion of this investigation consists of monotonic and cyclic tension, compression, and Iosipescu shear tests, as well as combined tension-compression tests. Tests were performed on composite specimens with three copper matrix alloy types: pure Cu, Cu-0.5 weight percent Ti (Cu-Ti), and Cu-0.7 weight percent Cr (Cu-Cr). The small alloying additions are present to promote fiber/matrix interfacial bonding. The analytical modeling effort utilizes an approach in which a local micromechanical model is embedded in a global micromechanical model. This approach differs from previously developed analytical models for woven composites in that a true repeating unit cell is analyzed. However, unlike finite element modeling of woven composites, the geometry is sufficiently idealized to allow efficient geometric discretization and efficient execution.

Bednarcyk, Brett A.↗
DOE OSTI2021

Methods for nondestructive dispersing of carbon nanomaterials in water

A method termed “superacid-surfactant exchange” (S2E) for the dispersion of carbon nanomaterials in aqueous solutions. This S2E method enables nondestructive dispersion of carbon nanomaterials (including single-walled carbon nanotubes, double-walled carbon nanotubes, multi-wall carbon nanotubes, and graphene) at rapidly and at large scale in aqueous solution without a requirement for expensive or complicated equipment. Dispersed carbon nanotubes obtained from this method feature long length, low defect density, high electrical conductivity, and in the case of semiconducting single-walled carbon nanotubes, bright photoluminescence in the near-infrared.

Wang, Yuhuang↗
NASA NTRS2014

Woven Thermal Protection System (WTPS) - a Novel Approach to Meet NASA's Most Demanding Missions

NASAs future robotic missions utilizing an entry system into Venus and the outer planets, namely, Saturn, Uranus, Neptune, result in extremely high entry conditions that exceed the capabilities of state of the art low to mid density ablators such as PICA or Avcoat. Therefore mission planners typically assume the use of a fully dense carbon phenolic heat shield similar to what was flown on Pioneer Venus and Galileo. Carbon phenolic is a robust TPS material however its high density and relatively high thermal conductivity constrain mission planners to steep entries, with high heat fluxes and pressures and short entry durations, in order for CP to be feasible from a mass perspective. The high entry conditions pose challenges for certification in existing ground based test facilities and the longer-term sustainability of CP will continue to pose challenges. In 2012 the Game Changing Development Program (GCDP) in NASAs Space Technology Mission Directorate funded NASA ARC to investigate the feasibility of a Woven Thermal Protection System (WTPS) to meet the needs of NASAs most challenging entry missions. This project was highly successful demonstrating that a Woven TPS solution compares favorably to CP in performance in simulated reentry environments and provides the opportunity to manufacture graded materials that should result in overall reduced mass solutions and enable a much broader set of missions than does CP. Building off the success of the WTPS project GCDP has funded a follow on project to further mature and scale up the WTPS concept for insertion into future NASA robotic missions. The matured WTPS will address the CP concerns associated with ground based test limitations and sustainability. This presentation will discuss results from the WTPS heat-shield for extreme entry environment technology (HEEET) project

woven TPS↗
DOE OSTI2024

Fast Charge‐Transfer Rates in Li‐CO 2 Batteries with a Coupled Cation‐Electron Transfer Process

Li-CO 2 batteries with a high theoretical energy density (1876 Wh kg −1 ) have unique benefits for reversible carbon fixation for energy storage systems. However, due to lack of stable and highly active catalysts, the long-term operation of Li-CO 2 batteries is limited to low current densities (mainly <0.2 mA cm −2 ) that are far from practical conditions. In this work, it is discovered that, with an ionic liquid-based electrolyte, highly active and stable transition metal trichalcogenide alloy catalysts of Sb 0.67 Bi 1.33 X 3 (X = S, Te) enable operation of the Li-CO 2 battery at a very high current rate of 1 mA cm −2 for up to 220 cycles. It is revealed that: i) the type of chalcogenide (Te vs S) significantly affects the electronic and catalytic properties of the catalysts, ii) a coupled cation-electron charge transfer process facilitates the carbon dioxide reduction reaction (CO 2 RR) occurring during discharge, and iii) the concentration of ionic liquid in the electrolyte controls the number of participating CO 2 molecules in reactions. A combination of these key factors is found to be crucial for a successful operation of the Li-CO 2 chemistry at high current rates. This work introduces a new class of catalysts with potential to fundamentally solve challenges of this type of batteries.

25 ENERGY STORAGE↗
DOE OSTI2024

One-Step Spark Plasma Erosion Processing of Carbon-Coated Sn-Si Nanoparticles for Lithium-Ion Battery Anodes

High density portable energy storage is desirable owing to the energy requirements of portable electronics and electric vehicles. The Li-ion battery’s high energy density could be even further improved through the utilization of alternative materials (instead of carbon) for the anode, such as Sn or Si. Nonetheless, the large volume expansion upon lithiation, up to ~300% for Li 22 Si 5 , causes pulverization and rapid capacity degradation during cycling. Sn also forms a Li 22 Sn 5 compound with the equivalent stoichiometric Li capacity but with enhanced ductility. Nano-sized Si and Sn have demonstrated distinctive nanoscale properties, facilitating the retention of higher capacities, particularly when coated with carbon, which improves mechanical stability. To date, the methods of synthesizing coated Si, Sn, or Si-Sn alloyed nanoparticles are complicated, costly, and not readily scalable to meet the demands of cost-effective manufacturing. Spark plasma erosion in a hydrocarbon dielectric has been explored as a one-step process to produce Sn-Si alloy nanoparticles coated with a thin carbon film, offering a scalable and cost-effective processing route. The resulting Sn-Si particles exhibited a bi-modal size distribution at ~5 nm and ~500 nm and were carbon-coated, as intended, from the hydrocarbon dielectric breakdown. The spark-eroded nanoparticles were thoroughly characterized using TEM/EDS, XPS, AES, SSNMR, and TGA, and their improved electrochemical performance was assessed through half-cell experiments.

25 ENERGY STORAGE↗
DOE OSTI2020

Direct Evidence of Charge Transfer upon Anion Intercalation in Graphite Cathodes through New Electronic States: An Experimental and Theoretical Study of Hexafluorophosphate

Graphite intercalation compounds continue to be central to technologies for electrochemical energy storage from anodes in established Li-ion batteries to cathodes in beyond Li-ion concepts paired with multivalent anodes. When used as a cathode, graphite intercalates a variety of anions with PF 6 - being among the most common. Paired with Li intercalation at the anode, the corresponding dual carbon battery yields high energy and power densities. Given the available choice of anions as intercalants, it is important to elucidate how the graphite structure accommodates them in order to tailor the molecular species to maximize charge and reversibility. However, the changes in electronic structure of the host graphite lattice upon anion intercalation are poorly understood compared to cations, which represent a fundamentally different reaction. Herein, PF 6 -intercalated graphite has been studied using techniques sensitive to electronic structure, namely, X-ray Raman spectroscopy (XRS), X-ray absorption near-edge spectroscopy (XANES), and X-ray emission spectroscopy (XES). Complementary full-potential, all-electron density functional theory calculations yielded excellent agreement with the spectra, thus providing insight into charge compensation in the graphite lattice. In particular, a pre-$π^*$ feature emerged in XRS/XANES, which is direct evidence of the removal of charge from the host lattice to compensate the intercalated anions, leading to an overall lowering of the Fermi energy level. This is expected to be characteristic of many intercalants in anion-intercalated graphite. The unambiguous identification of the origin of the pre-$π^*$ spectral feature, which is frequently seen in graphitic systems, is of broad interest to the spectroscopy of graphitic systems beyond the practical implications of anion-induced changes in the electronic properties for real devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Pathways for Sustainable Reaction Kinetics in Li-CO2 Batteries

Lithium-carbon dioxide (Li-CO2) batteries hold great promise for high-energy-density storage applications. However, advancing this technology as a sustainable alternative to Li-ion systems requires a deeper understanding of the underlying reaction mechanisms, which remain elusive. A key challenge stems from the added complexity introduced by the presence of oxygen (O2) in CO2 environment. In this study, we employed a stable Cu3(VBi)0.5Se4 mid-entropy catalyst and conducted a comprehensive investigation to uncover the underlying reaction mechanisms in Li-CO2 batteries under varying CO2/O2 ratios. Under pure CO2 conditions, the battery exhibits excellent rechargeability, sustaining up to 1200 cycles. However, at high current densities, the discharge potential drops significantly (below 2.0 V), primarily due to sluggish reaction kinetics caused by solid carbon formation. Interestingly, introducing O2 mitigates this limitation, leading to a 58% increase of the discharge potential (from 1.7 V to 2.7 V) at the high current density of 0.8 mA/cm2, signifying a substantial boost in energy output. Our results reveal that the reactions follow distinct pathways, shifting from surface- to solution-based mechanism, and may even exhibit coexistence of both mechanisms, depending on the CO2/O2 ratio. These findings offer new insights for designing high-performance and sustainable Li-gas batteries utilizing CO2 and O2 mixtures.

Ngo, Anh [University of illinois Chicago]↗
NASA NTRS2013

Woven Thermal Protection System Based Heat-shield for Extreme Entry Environments Technology (HEEET)

NASA's future robotic missions utilizing an entry system into Venus and the outer planets, namely, Saturn, Uranus, Neptune, result in extremely high entry conditions that exceed the capabilities of state of the art low to mid density ablators such as PICA or Avcoat. Therefore mission planners typically assume the use of a fully dense carbon phenolic heat shield similar to what was flown on Pioneer Venus and Galileo. Carbon phenolic is a robust TPS material however its high density and relatively high thermal conductivity constrain mission planners to steep entries, with high heat fluxes and pressures and short entry durations, in order for CP to be feasible from a mass perspective. The high entry conditions pose challenges for certification in existing ground based test facilities and the longer‐term sustainability of CP will continue to pose challenges. In 2012 the Game Changing Development Program (GCDP) in NASA's Space Technology Mission Directorate funded NASA ARC to investigate the feasibility of a Woven Thermal Protection System (WTPS) to meet the needs of NASA's most challenging entry missions. This project was highly successful demonstrating that a Woven TPS solution compares favorably to CP in performance in simulated reentry environments and provides the opportunity to manufacture graded materials that should result in overall reduced mass solutions and enable a much broader set of missions than does CP. Building off the success of the WTPS project GCDP has funded a follow on project to further mature and scale up the WTPS concept for insertion into future NASA robotic missions. The matured WTPS will address the CP concerns associated with ground based test limitations and sustainability. This presentation will briefly discuss results from the WTPS Project and the plans for WTPS maturation into a heat‐shield for extreme entry environment.

Ellerby, Donald↗
DOE OSTI2024

Do not forget the electrons: Extending moderately-sized nuclear networks for multidimensional hydrodynamic codes

Context.Nuclear networks are widely used coupled with hydrodynamical simulations of explosive scenarios to account for the change of nuclear species and energy generation rate due to nuclear reactions. In this way, there is a feedback mechanism between the hydrodynamical state and the nuclear processes. Unfortunately, the timescale of nuclear reactions is orders of magnitude smaller than the dynamical timescale that drives hydrodynamical simulations. Therefore, these nuclear networks are usually very small, reduced in most cases to a dozen elements, especially when simulations are carried out in more than one dimension. Aims.We present here an extended nuclear network, with 90 species, designed for being coupled with hydrodynamic simulations, which includes neutrons, protons, electrons, positrons, and the corresponding neutrino and anti-neutrino emission. This network is also coupled with temperature, making it extremely robust and, together with its size, unique of its kind. The inclusion of electron captures on free protons makes the network very appropriate for multidimensional studies of Type Ia supernova explosions, especially when the exploding object is a massive white dwarf. Methods.We perform several tests that are relevant to simulate explosive scenarios, such as Type Ia supernovae and core-collapse supernovae. We compare the results of the 90 nuclei network with a standardα-chain network with 14 elements to evaluate the differences in the energy generation rate. We also evaluate the relevance of including the electrons in the network in terms of generated yields and how it affects the pressure of a degenerate fluid such as that of white dwarfs. The results obtained with the 90-nuclei network have been verified with a much larger 2000-nuclei network built from REACLIB (WinNet), in terms of nuclear energy generation rate, pressure, and produced yields. Results.The results obtained with the proposed medium-sized network compare fairly well, to a few percent, with those computed withWinNetin scenarios reproducing the gross physical conditions of current Type Ia supernova explosion models. In those cases where the carbon and oxygen fuel ignites at high density, the high-temperature plateau typical of the nuclear statistical equilibrium regime is well defined and stable, allowing large integration time steps. We show that the inclusion of electron captures on free protons substantially improves the estimation of the electron fraction of the mixture. Therefore, the pressure is better determined than in networks where electron captures are excluded, which will ultimately lead to more reliable hydrodynamic models. Explosive combustion of helium at low density, occurring near the surface layer of a white dwarf, is also better described with the proposed network, which gives nuclear energy generation rates much closer toWinNetthan typical reduced alpha networks. Conclusions.A nuclear network withN= 90 species, including electrons, aimed at multidimensional calculations of supernova explosions is described and verified. The proposed network is suitable for the study of Type Ia supernova explosions because it provides better values of pressure and electron abundance than other existing networks with smaller or even a similar size but without including electron capture processes.

Astronomy & Astrophysics↗
DOE OSTI2026

Advanced LiFSI-LiPF6 Electrolyte for Wide-Temperature and Thermally Stable Lithium-Ion Batteries

A new optimized LiFSI–LiPF6 dual-salt controlled-solvation electrolyte (E-DS) is demonstrated to enable practical graphite||LiNi0.8Mn0.1Co0.1O2 cells (˜4.0 mAh cm?²) to achieve exceptional performance and safety under extreme conditions. By optimizing anion coordination with the smaller, more dissociating FSI? anion, the E-DS forms ultrathin, dense, and inorganic-rich electrode/electrolyte interphases that dramatically suppress solvent decomposition, transition-metal dissolution, and surface reconstruction compared to the conventional LiPF6/carbonate electrolyte. Consequently, E-DS cells deliver >78% capacity retention after 300 cycles at 60 °C, retain fast discharging capacity at 30 °C, and operate effectively at -20 °C. Most strikingly, fully charged full cells with E-DS, even under overcharging to 4.8 V, show a lower heat evolution in stable formulations — transforming a traditionally unstable high-voltage/high-temperature configuration into an intrinsically safe state. This work establishes a new benchmark for carbonate-containing electrolytes, simultaneously achieving high energy density, fast-discharging capability, wide-temperature operation (-20 to 60 °C), and outstanding thermal safety in nickel-rich lithium-ion batteries.

electrode/electrolyte interphase↗
DOE OSTI2020

Design and Operability of a Pressurized Oxy Combustion System

Fossil fuel powers more than two-thirds of the world’s electricity, a significant share of which is derived from coal power plants. Despite coal being an abundant and energy-rich fuel, the major halt to its progress is greenhouse gas emissions. Pressurized oxy-combustion cycles can achieve theoretically high thermal efficiencies along with a 90% carbon capture rate. Additionally, the high energy density allows smaller turbomachinery and save capital cost. Thus, the primary objective of this dissertation is to present the design and operability of a pressurized oxy-combustor system. The initial part of the dissertation investigates different thermodynamic cycles and presents a model that can be adapted for existing power plants. The thermodynamic model will be used in the later part to design the proposed combustor. The two cycles analyzed are ENEL and TIPS. This study focuses on qualitative analyses of the cycles using a commercially available software called Aspen Plus®. A detailed benchmark study has been performed to validate the modeling process. ENEL and TIPS cycles are designed in the software, adopting the same principles. Recirculation ratio and pressures are varied to find the efficiency range of the cycles. Power calculations are done to find overall and net efficiency for a fixed recirculation ratio. The efficiencies of the cycles are compared to select an optimum cycle. A recirculation ratio of 50% is selected for implementation. The comparison shows that ENEL is marginally efficient over TIPS, at the cost of a pressure difference of about 70bars. Technology Readiness Level analysis is performed to present the availability of the specialized equipment for the cycles. From the TRL analysis, it is seen that the cost and availability of high viii pressure equipment surmount the edge of TIPS over ENEL. Thus, ENEL is chosen as the better cycle for investigating a scaled experiment considering efficiency and viability. The later part of the dissertation focuses on developing the combustor's design for a pressurized oxy-combustion cycle. The proposed combustor is a powerhead-mounted design aimed to produce 1MW of thermal outputThe different aspects of the design of a down-fired pressurized swirl combustor are presented in this dissertation.

Chowdhury, Mehrin↗
DOE OSTI2020

Enabling 6C Fast Charging of Li–Ion Batteries with Graphite/Hard Carbon Hybrid Anodes

Li-ion batteries that can simultaneously achieve high-energy density and fast charging are essential for electric vehicles. Graphite anodes enable a high-energy density, but suffer from an inhomogeneous reaction current and irreversible Li plating during fast charging. In contrast, hard carbon exhibits superior rate performance but lower energy density owing to its lower initial coulombic efficiency and higher average voltage. In this work, these tradeoffs are overcome by fabricating hybrid anodes with uniform mixtures of graphite and hard carbon, using industrially-relevant multi-layer pouch cells (>1 Ah) and electrode loadings (3 mAh cm –2 ). By controlling the graphite/hard carbon ratio, this study shows that battery performance can be systematically tuned to achieve both high-energy density and efficient fast charging. Pouch cells with optimized hybrid anodes retain 87% and 82% of their initial specific energy after 500 cycles of 4C and 6C fast-charge cycling, respectively. This is significantly higher than the 61% and 48% specific energy retention with graphite anodes under the same conditions. The enhanced performance is attributed to improved homogeneity of the reaction current throughout the hybrid anode, which is supported by continuum-scale modeling. Furthermore, this process is directly compatible with existing roll-to-roll battery manufacturing, representing a scalable pathway to fast charging.

25 ENERGY STORAGE↗
DOE OSTI2025

Upcycling Polyethylene Waste Into Hybrid Graphitic Porous Carbon Materials Used in High-Performance Zinc-Ion Hybrid Capacitors

Polyethylene (PE) waste is a challenge to upcycle into useful materials because this plastic tends to decompose into volatile compounds when heated at relatively low temperatures. In this work, we report a chemical process that addresses this challenge by converting mixtures of linear low-density polyethylene (LLDPE), low-density polyethylene (LDPE), and high-density polyethylene (HDPE) waste into a hybrid graphitic porous carbon (HGPC) that can be used as a zinc-ion hybrid capacitor cathode. The process uses a low temperature thermal oxidation pre-treatment step, with assistance of an inert solid additive (KCl) to increase the effective surface area of the PE melt, to functionalize, cross-link, and stabilize the PE waste followed by carbonization and catalytic graphitization steps at higher temperatures with a potassium carbonate (K2CO3) catalyst. The PE waste derived HPGC (PW-HPGC) has a hybrid structure composed of graphene-like carbon nanosheets grown on the surface of carbon particles, high porosity with the Brunauer–Emmett–Teller (BET) specific surface area up to 1,763 m2g-1, and good graphitic degree with average Raman I2D/IG ratios of 0.53. When used as a cathode material for zinc-ion hybrid capacitors, this PW-HGPC exhibits an excellent specific capacity up to 126.7 mAhg-1 at high mass loading of 10 mgcm-2. Moreover, PW-HGPC exhibits remarkable cycling stability with capacity retention of >94% after 10,000 cycles at a current density of 2.0 A g-1.

hybrid graphitic porous carbon↗
DOE OSTI2021

Advanced strategies for the development of porous carbon as a Li host/current collector for lithium metal batteries

Lithium metal is considered a promising anode material for high-energy-density rechargeable batteries because of its high specific theoretical capacity (3860 mAh g -1 , low mass density (0.534 g cm -3 ), and low electrochemical redox potential (-3.04 V vs. the standard hydrogen electrode). However, the high reactivity of Li with the electrolyte leads to the formation of an unstable solid electrolyte interphase (SEI) and continuous side reactions. Also, the non-uniform lithium-ion flux and infinite volume expansion of Li metal cause the growth of Li dendrites. These pose significant safety challenges and cause rapid capacity fading of the lithium metal batteries (LiMBs). To resolve these issues, a low-cost, easily processed, lightweight, high-performance carbon-based porous matrix is considered promising to host Li metal deposition. The three-dimensional (3D) porous nano/microstructured carbon provides sufficient space for Li accommodation during Li plating, buffers the volume changes during Li plating/stripping, and lowers the effective current density contributing to dendrite-free Li deposition. Besides, the outstanding electrochemical and mechanical stability, flexibility and the high electronic conductivity enable the nano/microstructured carbon to serve as both Li host and current collector. The development of 3D carbon/Li composite by mechanical roll-press techniques not only eliminates the complex and risky procedure of making carbon/Li composite based on Li plating or molten Li infusion but also stabilizes the capacity at higher Li plating/stripping rates. Recently, there is an advancement in the lithiophilic decorations of 3D structure to introduce sufficient nucleation sites and the development of artificial SEI on top of the 3D matrix to suppress Li dendrite formation. Such 3D structural modifications create a uniform electric field, lower the Li nucleation overpotential, provide strong mechanical and chemical stability, and stabilize the interface thereby inhibiting the degradation of lithium and the electrolyte. Here we summarize the research progress on porous carbon/Li composites in terms of materials type, structure, fabrication technique, their electrochemical battery performance, and identify the critical challenges that need to be addressed for high-energy-density practical LiMBs.

25 ENERGY STORAGE↗
DOE OSTI2024

Upcycling Linear Low-Density Polyethylene Waste into Graphene for High Mass Loading Supercapacitors

Upcycling plastic into advanced carbons, such as graphene and porous carbon, offers attractive options to manage waste streams by converting the plastic into carbon electrode materials for energy storage devices. Linear low density polyethylene (LLDPE) is firstly bulk-oxidized with a facile and scalable method and then carbonized and catalyticlly graphenized into porous graphene materials. The LLDPE derived graphene (LLDPE-G) has a BET specific surface area up to 1800 m2/g and Raman ID/IG ratio of 0.85. When used as electrode material for symmetric supercapacitor, LLDPE-G possesses outstanding specific capacitance and excellent areal capacitance. Moreover, LLDPE-G exhibits exceptional cycling stability with capacitance retention of 95.8% after 100,000 cycles. Last but not least, KCl is recycled and reused over 3 cycles with material quality and electrocapacitive performance of LLDPE-G retained and verified after each cycle.

Gao, Yuan↗