Search NASA⌕ Search

SEARCH · Search NASA

Results for “Homogeneous flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Effect of Homogenization Treatment and Microalloying with Mn on the Microstructure and Hot Workability of AA6060 Aluminum Alloys

The effects of a homogenization treatment and microalloying with Mn on the evolution of the microstructure and hot workability of AA6060 aluminum alloys were investigated. Various homogenization treatments with temperatures ranging from 520 to 610 °C and soaking times from 2 to 16 h were conducted. The results revealed that β-AlFeSi intermetallic was the dominant phase in the as-cast microstructure of the experimental alloys. During the homogenization, the fragmentation of intermetallics occurred and plate-like β-AlFeSi transformed into rod-like α-AlFeSi. In addition, a number of dispersoids precipitated in the 0.1Mn alloy in the temperature range of 520-580 °C. The flow stress behavior of the homogenized AA6060 alloys was mainly determined by the solid solution level. Increasing homogenization temperatures resulted in higher flow stresses owing to the increase in solute atoms in the aluminum matrix. The incremental Mn addition from 0 to 0.1% moderately increased the flow stress by up to 3%. Grain growth occurred in the alloys with low Mn contents (< 0.03Mn) during the high-temperature homogenization (580-610 °C), which resulted in a sudden decrease in the flow stresses and an irregular sample shape after the deformation. Microalloying with Mn (> 0.06%) can effectively prevent grain growth at such temperatures. For an alloy with Mn (0.1%) microalloying, homogenization at 550-580 °C for 6 h could be the optimal condition to balance the flow stress and desirable microstructure.

36 MATERIALS SCIENCE↗

Impact of gravity on hydrate saturation in gas‐rich environments

Abstract We extend a one‐dimensional analytical solution by including buoyancy‐driven flow to explore the impact of gravity on hydrate formation from gas injection into brine‐saturated sediments within the hydrate stability zone. This solution includes the fully coupled gas and liquid phase flow and the associated advective transport in a homogeneous system. We obtain the saturations assuming Darcy flow under combined pressure and gravity gradients; capillary forces are neglected. At a high gas supply rate, the overpressure gradient (gradient of water pressure deviation from the hydrostatic pressure) dominates the gas flow, and the hydrate saturation is independent of the flow rate and flow direction. At a low gas supply rate, the buoyancy (the drive for gas flow induced by the density difference between gas and liquid) dominates the gas flow, and the hydrate saturation depends on the flow rate and flow direction. Hydrate saturation is highest for upward flow, and lowest for downward flow. Hydrate saturation decreases with flow rate for upward flow, and increases with flow rate for downward flow. In all cases, hydrate saturation is constant behind the hydrate solidification front. Gas saturation is homogeneous and close to the residual value for upward flow at a low rate; gas flows at the rate it is supplied. Gas saturation is much greater than the residual value, and decreases from the gas inlet to the hydrate solidification front for downward flow at a very low rate. The effect of gravity is usually negligible in laboratory experiments, yet is significant in natural hydrate systems.

You, Kehua↗

Pathways for conversion of char nitrogen to nitric oxide during pulverized coal combustion

The conversion of nitrogen in char (char-N) to NO was studied both experimentally and computationally. In the experiments, pulverized coal char was produced from a U.S. high-volatile bituminous coal and burned in a dilute suspension at 1170 K, 1370 K and 1570 K, at an excess oxygen concentration of 8% (dry), with different levels of background NO. In some experiments, hydrogen bromide (HBr) was added to the vitiated air as a tool to alter the concentration of gas-phase radicals. During char combustion, low NO concentration and high temperature promoted the conversion of char-N to NO. HBr addition altered NO production in a way that depended on temperature. At 1170 K the presence of HBr increased NO production by 80%, whereas the addition of HBr decreased NO production at higher temperatures by 20%. To explain these results, three mechanistic descriptions of char-N evolution during combustion were evaluated with computational models that simulated (a) homogeneous chemistry in a plug-flow reactor with entrained particle combustion, and (b) homogeneous chemistry in the boundary layer surrounding a reacting particle. The observed effect of HBr on NO production could only be captured by a chemical mechanism that considered significant release of HCN from the char particle. Release of HCN also explained changes in NO production with temperature and NO concentration. Thus, the combination of experiments and simulations suggests that HCN evolution from the char during pulverized coal combustion plays an essential role in net NO production. (author)

01 COAL, LIGNITE, AND PEAT↗

Improved Accuracy for Two-Phase Downflow Scenarios

Problems have been reported for very high downflows in small and intermediate pipes in the bubbly and slug flow regimes. When the flow rate is near critical, the calculated mass flow rate depends strongly on the flow orientation for small and intermediate pipes, whereas the flow rate is nearly independent of flow direction for large pipes. At very high flow rates, the flow is expected to be nearly homogenous and hence to be nearly independent of flow direction. The flow rates calculated by RELAP5-3D agree with this expectation except for downflow in small and intermediate pipes, where the calculated flows in the downward direction are about 20% lower than the flows in the upward and horizontal directions. The problem was traced to an extrapolation of the EPRI drift flux correlation beyond the range of its database. The problem was corrected by creating a very high downflow regime. The EPRI correlation is replaced by the Zuber-Findlay churn turbulent and Kataoka-Ishii drift flux correlations in the very high downflow regime for small and intermediate pipes.

97 MATHEMATICS AND COMPUTING↗

Hydraulic Conductivity for Porous Medium with Wavy 3-D Pores - 16244

The flow of a viscous fluid is considered to calculate the permeability of a porous medium with wavy pores. Under the assumption of periodicity a unit cell which contains solid phase of wavy shape is chosen on the microscale and the flow field is calculated by solving a certain boundary-value problem (BVP), Stokes problem. The BVP is obtained by applying the theory of homogenization to slow viscous flow through porous structure on the microscale. It is shown that the permeability is dominantly determined by the flow through straightly connected portion of the pore space. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Calculation of Permeability for Granular Porous Media - 17030

The flow of a viscous fluid is considered to calculate the permeability of a porous medium with granular solid phase. Under the assumption of periodicity a unit cell which contains solid phase of granular shape is selected on the microscale and the flow field is calculated by solving Stokes problem in which inertial effects are ignored. A Boundary-Vale Problem is obtained by applying the theory of homogenization to slow viscous flow through porous structure on the microscale. It is shown that the permeability is dominantly determined by the flow direction along which the pressure gradient on the macro-scale is imposed. (authors)

36 MATERIALS SCIENCE↗

Calculation of permeability for porous media - 15108

Creeping flow of a viscous fluid is considered to calculate the permeability of a soil aggregate. Under the assumption of periodicity a unit cell which contains solid grains of irregular geometry is chosen on the microscale and the flow field is calculated by solving a certain boundary-value problem (BVP) known as; Stokes problem. The BVP is obtained by applying the theory of homogenization to slow viscous flow through porous structure on the microscale. It is shown that the permeability is dominantly along the direction of the external pressure gradient on the macro-scale with non-vanishing transverse permeability due to anisotropic feature of the grain arrangement. (authors)

42 ENGINEERING↗

Time-dependent study of anisotropy in Rayleigh-Taylor instability induced turbulent flows with a variety of density ratios

This study focuses on understanding the time-dependent anisotropy, mixing, scaling of flows induced by Rayleigh-Taylor instability, and complementing the late-time snapshots reported by Cabot and Zhou [“Statistical measurements of scaling and anisotropy of turbulent flows induced by Rayleigh-Taylor instability,” Phys. Fluids 25, 015107 (2013)]. In particular, we utilize three large datasets with different Atwood numbers (density ratios) from well resolved direct numerical simulations at a moderate Reynolds number with the goal of determining the degree of departure of this inhomogeneous flow from that of homogeneous, isotropic turbulence. Three key time-dependent statistical measurements are considered in detail to delineate the role played by the acceleration. First, a number of directional length scales in this anisotropic turbulence are inspected. Second, the relationship among the outer-scale, the turbulence length, and the Taylor-microscale based Reynolds numbers is also clarified. Lastly, the normalized dissipation rate is employed to inspect the distinctive features of the flow in the inhomogeneous direction parallel to gravity and in the homogeneous perpendicular directions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Numerical schemes for dynamically orthogonal equations of stochastic fluid and ocean flows

The quantification of uncertainties is critical when systems are nonlinear and have uncertain terms in their governing equations or are constrained by limited knowledge of initial and boundary conditions. Such situations are common in multiscale, intermittent and non-homogeneous fluid and ocean flows. The dynamically orthogonal (DO) field equations provide an adaptive methodology to predict the probability density functions of such flows. The present work derives efficient computational schemes for the DO methodology applied to unsteady stochastic Navier-Stokes and Boussinesq equations, and illustrates and studies the numerical aspects of these schemes. Semi-implicit projection methods are developed for the mean and for the DO modes, and time-marching schemes of first to fourth order are used for the stochastic coefficients. Conservative second-order finite-volumes are employed in physical space with new advection schemes based on total variation diminishing methods. Other results include: (i) the definition of pseudo-stochastic pressures to obtain a number of pressure equations that is linear in the subspace size instead of quadratic; (ii) symmetric advection schemes for the stochastic velocities; (iii) the use of generalized inversion to deal with singular subspace covariances or deterministic modes; and (iv) schemes to maintain orthonormal modes at the numerical level. To verify our implementation and study the properties of our schemes and their variations, a set of stochastic flow benchmarks are defined including asymmetric Dirac and symmetric lock-exchange flows, lid-driven cavity flows, and flows past objects in a confined channel. Different Reynolds number and Grashof number regimes are employed to illustrate robustness. Optimal convergence under both time and space refinements is shown as well as the convergence of the probability density functions with the number of stochastic realizations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of PBX prill size on the compressive properties of PBX 9502

Plastic-Bonded Explosive (PBX) prills are agglomerates a few millimeters in diameter composed of High Explosive crystals non-uniformly distributed in and surrounded by a polymer binder. When pressed at elevated temperatures at or above the binder melt temperature the polymer flows to uniformly coat the HE crystals to create a well-consolidated compaction. In reality it does so imperfectly, such that x-ray tomographic scans often look like a collection of prills mashed together. It is speculated that the larger the prill, the more non-uniform the binder distribution, but this has never been proven. Even if that were not so, the larger the prill the farther binder must flow toward the middle to homogenize during pressing. Thus, the degree of homogenization depends in part on prill size. The degree to which binder flows during pressing in turn affects the void distribution within pressed charges, which one suspects will affect shock sensitivity and material strength. In this paper we explore, for ~30 PBX 9502 formulation batches using the same TATB powder lot, how prill size affects the compressive mechanical properties.

36 MATERIALS SCIENCE↗

NEK5000 Assessment Milestone Report: Single-Phase Natural Circulation using Direct Numerical Simulation (DNS) & Large Eddy Simulation (LES) Methods

This study evaluates the capabilities of the NEK5000 open-source code as an alternative to the commercially available software that is currently heavily relied upon. The first three case studies initiated the author with (1) the syntax and flow of the program, (2) varying initial and boundary conditions and (3) geometries of greater complexity & dimension. Case 1 studies transient conjugate heat transfer in the entry region of a pipe. Cases 2 & 3 simulate the natural convection flow in an enclosed differentially heated cavity (DHC) of two and three dimensions, respectively. The final case study, Case 4, produces three-dimensional single-phase natural convective flow using the Boussinesq approximation within a simplified representation of an aqueous homogeneous reactor system. The Boussinesq flow in Case 4 clearly depicts both Rayleigh-Taylor and Kelvin-Helmholtz instabilities qualitatively during post-processing analysis. Further analysis of Case 4, up to the point of a quasi-steady state (i.e. thermal-equilibrium condition), is done using the LES solver method in NEK5000. The volume-averaged solution temperatures, when compared between solvers, showed no significant difference. Due to its minimal compromise in fidelity of solution resolution and inexpensive computing cost, compared to the DNS solver, the LES solver is recommended for the current application. Methodology development for the four case studies are reported and a preliminary optimization study with different polynomial resolutions for Case 4 is addressed as a resource when performing future simulations using NEK5000. Hence, this report can be used as a reference starting point to the end user of NEK5000 for natural circulation phenomena in nuclear reactor safety applications.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Effect of PBX Prill Size on the Compressive Properties of PBX 9502

Plastic-Bonded Explosive (PBX) prills are agglomerates a few millimeters in diameter composed of High Explosive crystals non-uniformly distributed in and surrounded by a polymer binder. When pressed at elevated temperatures at or above the binder melt temperature the polymer flows to uniformly coat the HE crystals to create a well-consolidated compaction. In reality it does so imperfectly, such that x-ray tomographic scans often look like a collection of prills mashed together. It is speculated that the larger the prill, the more non-uniform the binder distribution, but this has never been proven. Even if that were not so, the larger the prill the farther binder must flow toward the middle to homogenize during pressing. Thus, the degree of homogenization depends in part on prill size. The degree to which binder flows during pressing in turn affects the void distribution within pressed charges, which one suspects will affect shock sensitivity and material strength. In this paper we explore, for ~30 PBX 9502 formulation batches using the same TATB powder lot, how prill size effects the compressive mechanical properties.

36 MATERIALS SCIENCE↗

Importance sampling variance reduction for the Fokker–Planck rarefied gas particle method

The Fokker–Planck approximation to the Boltzmann equation, solved numerically by stochastic particle schemes, is used to provide estimates for rarefied gas flows. This paper presents a variance reduction technique for a stochastic particle method that is able to greatly reduce the uncertainty of the estimated flow fields when the characteristic speed of the flow is small in comparison to the thermal velocity of the gas. The method relies on importance sampling, requiring minimal changes to the basic stochastic particle scheme. We test the importance sampling scheme on a homogeneous relaxation, planar Couette flow and a lid-driven-cavity flow, and find that our method is able to greatly reduce the noise of estimated quantities. Significantly, we find that as the characteristic speed of the flow decreases, the variance of the noisy estimators becomes independent of the characteristic speed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Determination of volume fractions in two-phase flows from sound speed measurement

Accurate measurement of the composition of oil-water emulsions within the process environment is a challenging problem in the oil industry. Ultrasonic techniques are promising because they are non-invasive and can penetrate optically opaque mixtures. This paper presents a method of determining the volume fractions of two immiscible fluids in a homogenized two-phase flow by measuring the speed of sound through the composite fluid along with the instantaneous temperature. Two separate algorithms are developed by representing the composite density as (i) a linear combination of the two densities, and (ii) a non-linear fractional formulation. Both methods lead to a quadratic equation with temperature dependent coefficients, the root of which yields the volume fraction. The densities and sound speeds are calibrated at various temperatures for each fluid component, and the fitted polynomial is used in the final algorithm. We present results when the new algorithm is applied to mixtures of crude oil and process water from two different oil fields, and a comparison of our results with a Coriolis meter; the difference between mean values is less than 1%. Analytical and numerical studies of sensitivity of the calculated volume fraction to temperature changes and calibration errors are also presented.

02 PETROLEUM↗

Direct Discontinuous Galerkin methods for the reacting multi-component flow equations

The Direct Discontinuous Galerkin (DDG (Liu and Yan, 2008)) method and a counterpart with Interface Correction (DDGIC (Danis and Yan, 2022)) are extended to compute diffusion terms that arise when solving the compressible multi-component flow equations in thermochemical nonequilibrium. Thermodynamic properties, transport properties, chemical reaction rates, and energy exchange terms are computed using Mutation++ (Scoggins et al., 2020). The DG method is applied on unstructured grids, where the accuracy and convergence rates can be sensitive to the numerical method chosen for parabolic terms. A method for determining the homogeneity tensor of the flow equations required for DDGIC is shown. The convergence properties of the DDG methods are studied and compared to the Interior Penalty (IP) method. A number of numerical experiments are conducted to assess the accuracy and performance of the method. The numerical results and convergence studies indicate that DDG and DDGIC provide accurate solutions and perform well for general flows in thermochemical nonequilibrium.

Diffusion↗

A Two-length Scale Turbulence Model for Single-phase Multi-fluid Mixing

A two-length scale, second moment turbulence model (Reynolds averaged Navier-Stokes, RANS) is proposed to capture a wide variety of single-phase flows, spanning from incompressible flows with single fluids and mixtures of different density fluids (variable density flows) to flows over shock waves. The two-length scale model was developed to address an inconsistency present in the single-length scale models, e.g. the inability to match both variable density homogeneous Rayleigh-Taylor turbulence and Rayleigh-Taylor induced turbulence, as well as the inability to match both homogeneous shear and free shear flows. The two-length scale model focuses on separating the decay and transport length scales, as the two physical processes are generally different in inhomogeneous turbulence. This allows reasonable comparisons with statistics and spreading rates over such a wide range of turbulent flows using a common set of model coefficients. The specific canonical flows considered for calibrating the model include homogeneous shear, single-phase incompressible shear driven turbulence, variable density homogeneous Rayleigh-Taylor turbulence, Rayleigh-Taylor induced turbulence, and shocked isotropic turbulence. The second moment model shows to compare reasonably well with direct numerical simulations (DNS), experiments, and theory in most cases. The model was then applied to variable density shear layer and shock tube data and shows to be in reasonable agreement with DNS and experiments. Additionally, the importance of using DNS to calibrate and assess RANS type turbulence models is highlighted.

04 OIL SHALES AND TAR SANDS↗

A Reduced-Boundary-Function Method for Convective Heat Transfer With Axial Heat Conduction and Viscous Dissipation

We introduce a new method of solution for the convective heat transfer under forced laminar flow that is confined by two parallel plates with a distance of 2a or by a circular tube with a radius of a. The advection-conduction equation is first mapped onto the boundary. The original problem of solving the unknown field T(x,r,t) is reduced to seek the solutions of T at the boundary (r = a or r = 0, r is the distance from the centerline shown in Fig. 1), i.e., the boundary functions T{sub a}(x,t) {triple_bond} T(x,r=a,t) and/or T{sub 0}(x,t) {triple_bond} T(x,r=0,t). In this manner, the original problem is significantly simplified by reducing the problem dimensionality from 3 to 2. The unknown field T(x,r,t) can be eventually solved in terms of these boundary functions. The method is applied to the convective heat transfer with uniform wall temperature boundary condition and with heat exchange between flowing fluids and its surroundings that is relevant to the geothermal applications. Analytical solutions are presented and validated for the steady-state problem using the proposed method.

99 GENERAL AND MISCELLANEOUS↗