Results for “Hydrological design” — Page 8

DOE OSTI2024

CMIP6-based Multi-model Streamflow Projections over the Conterminous US, Version 1.1

This dataset presents an ensemble of streamflow projections covering the conterminous United States (CONUS), developed to support the SECURE Water Act Section 9505 Assessment for the US Department of Energy (DOE) Water Power Technologies Office (WPTO). Multiple Coupled Models Intercomparison Project phase 6 (CMIP6) Global Climate Models (GCMs) were downscaled using either statistical (DBCCA) or dynamical (RegCM) downscaling methods, based on two meteorological reference datasets (Daymet and Livneh). Subsequently, the downscaled precipitation, temperature, and wind speed data were used to drive two calibrated hydrologic models (VIC and PRMS), with total runoff routed through the Routing Application for Parallel computatIon of Discharge (RAPID) routing model, producing an ensemble of streamflow projections across 2.7 million NHDPlusV2 stream reaches across the CONUS. Each ensemble member covers the 1980-2019 baseline and 2020-2059 near-future periods under the high-end (SSP585) emission scenario. Additionally, using only DBCCA and Daymet, the projections extend to the 2060-2099 far-future period and encompass three additional emission scenarios (SSP370, SSP245, and SSP126). This dataset is designed to support the SECURE Water Act Section 9505 Assessment for the US Department of Energy (DOE) Water Power Technologies Office (WPTO). For further details, refer to Kao et al. (2022), Rastogi et al. (2022), and Ghimire et al. (2023).

13 HYDRO ENERGY↗

DOE OSTI2023

Quantum algorithms for geologic fracture networks

Abstract Solving large systems of equations is a challenge for modeling natural phenomena, such as simulating subsurface flow. To avoid systems that are intractable on current computers, it is often necessary to neglect information at small scales, an approach known as coarse-graining. For many practical applications, such as flow in porous, homogenous materials, coarse-graining offers a sufficiently-accurate approximation of the solution. Unfortunately, fractured systems cannot be accurately coarse-grained, as critical network topology exists at the smallest scales, including topology that can push the network across a percolation threshold. Therefore, new techniques are necessary to accurately model important fracture systems. Quantum algorithms for solving linear systems offer a theoretically-exponential improvement over their classical counterparts, and in this work we introduce two quantum algorithms for fractured flow. The first algorithm, designed for future quantum computers which operate without error, has enormous potential, but we demonstrate that current hardware is too noisy for adequate performance. The second algorithm, designed to be noise resilient, already performs well for problems of small to medium size (order 10–1000 nodes), which we demonstrate experimentally and explain theoretically. We expect further improvements by leveraging quantum error mitigation and preconditioning.

58 GEOSCIENCES↗

DOE OSTI2021

Deep Learning for Ensemble Forecasting

Focal Area: (2) Predictive modeling through the use of AI techniques and AI-derived model components and the use of AI and other tools to design a prediction system comprising a hierarchy of models. Science Challenge: While both climate and weather forecast systems have continued to improve due to substantial efforts to improve computational capabilities, observations, and numerical models, the atmosphere is a chaotic system, and this puts a fundamental limit on our ability to make predictions. Forecasts made by high-resolution models initialized with only slightly different atmospheric states can quickly diverge. Quantifying uncertainty in forecasts is essential to adequately understand them and to make the best-informed policy decisions particularly when it comes to hydrology, extreme weather (including extreme precipitation events), and climate.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Prediction of Long-Term Geochemical Change in Bentonite Based on the Interpretative THMC Model of the FEBEX In Situ Test

Since nuclear energy is crucial in the decarbonization of the energy supply, one hurdle to remove is the handling of high-level radioactive waste (HLW). Disposal of HLW in a deep geological repository has long been deemed a viable permanent option. In the design of a deep geological repository, compacted bentonite is the most commonly proposed buffer material. Predicting the long-term chemical evolution in bentonite, which is important for the safety assessment of a repository, has been challenging because of the complex coupled processes. Models for large-scale tests and predictions based on such models have been some of the best practices for such purposes. An 18-year-long in situ test with two dismantling events provided a unique set of chemical data that allowed for studying chemical changes in bentonite. In this paper, we first developed coupled thermal, hydrological, mechanical, and chemical (THMC) models to interpret the geochemical data collected in the in situ test and then extended the THMC model to 200 years to make long-term prediction of the geochemical evolution of bentonite. The interpretive coupled THMC model shows that the geochemical profiles were strongly affected by THM processes such as evaporation/condensation, porosity change caused by swelling, permeability change, and the shape of concentration profiles for major cations were largely controlled by transport processes, but concentration levels were regulated by chemical reactions, and the profiles of some species such as pH, bicarbonate, and sulfate were dominated by these reactions. The long-term THMC model showed that heating prolongs the time that bentonite becomes fully saturated in the area close to the heater/canister; however, once the bentonite becomes fully saturated, high concentrations of ions in bentonite near the heater, which was observed in the field test, will disappear; illitization continues for 50 years but will not proceed further.

Zheng, Liange↗

DOE OSTI2025

Supporting Information - How Can Crop Production Adapt to growing groundwater restrictions in the West?

Abstract This data plan outlines the structure and content of datasets generated and utilized in the research presented in the manuscript abstract. Groundwater overdraft has led to serious water supply issues in the US West. Most western states manage groundwater use through a permitting system, but California has only recently begun to restrict groundwater use statewide with the 2014 passage of groundwater restrictions which target the elimination of groundwater overdraft practices by 2042. With groundwater extraction curtailed, crop production in the US West (a $95 billion industry annually) will be affected, and appropriate response strategies will be needed to ensure minimal disruption to food production and the regional economy. In this paper, we explore the adoption of alternative adaptive responses: (a) deficit irrigation; (b) switching to less water-intensive crops; (c) changing the extent of irrigated land (including fallowing); and (d) geographically shifting crop production. Employing an integrated modeling approach, we explicitly capture the interactions and feedbacks between local hydrology, changes in crop yields, crop and land use decision-making, changes in crop prices, and regional shifts in crop production. We find that the optimal adaptive response is spatially heterogeneous and comprises a portfolio of strategies. Southwestern states and California will be the most impacted by groundwater restrictions. The optimal responses in these states are to both adopt deficit irrigation strategies and reduce a portion of their irrigated croplands, resulting in a shift in crop production to northwestern states with a larger supply of water. The datasets detailed in this repository represent the output from these integrated models, specifically designed to support the analysis and visualization presented in the manuscript and supplemental information. These datasets, used in conjunction with the scripts available at our associated GitHub repository (https://github.com/pches/Femeena_etal_How_can_crop_production_adapt), enable the reproduction of figures and facilitate a comprehensive understanding of the optimal adaptive strategies in agriculture for mitigating water stress under varying groundwater extraction scenarios, as outlined in the abstract.

DNDCe↗

DOE OSTI2025

Supporting Information - How Can Crop Production Adapt to growing groundwater restrictions in the West?

Abstract This data plan outlines the structure and content of datasets generated and utilized in the research presented in the manuscript abstract. Groundwater overdraft has led to serious water supply issues in the US West. Most western states manage groundwater use through a permitting system, but California has only recently begun to restrict groundwater use statewide with the 2014 passage of groundwater restrictions which target the elimination of groundwater overdraft practices by 2042. With groundwater extraction curtailed, crop production in the US West (a $95 billion industry annually) will be affected, and appropriate response strategies will be needed to ensure minimal disruption to food production and the regional economy. In this paper, we explore the adoption of alternative adaptive responses: (a) deficit irrigation; (b) switching to less water-intensive crops; (c) changing the extent of irrigated land (including fallowing); and (d) geographically shifting crop production. Employing an integrated modeling approach, we explicitly capture the interactions and feedbacks between local hydrology, changes in crop yields, crop and land use decision-making, changes in crop prices, and regional shifts in crop production. We find that the optimal adaptive response is spatially heterogeneous and comprises a portfolio of strategies. Southwestern states and California will be the most impacted by groundwater restrictions. The optimal responses in these states are to both adopt deficit irrigation strategies and reduce a portion of their irrigated croplands, resulting in a shift in crop production to northwestern states with a larger supply of water. The datasets detailed in this repository represent the output from these integrated models, specifically designed to support the analysis and visualization presented in the manuscript and supplemental information. These datasets, used in conjunction with the scripts available at our associated GitHub repository (https://github.com/pches/Femeena_etal_How_can_crop_production_adapt), enable the reproduction of figures and facilitate a comprehensive understanding of the optimal adaptive strategies in agriculture for mitigating water stress under varying groundwater extraction scenarios, as outlined in the abstract.

DNDCe↗

DOE OSTI2025

Supporting Information - How Can Crop Production Adapt to growing groundwater restrictions in the West?

Abstract This data plan outlines the structure and content of datasets generated and utilized in the research presented in the manuscript abstract. Groundwater overdraft has led to serious water supply issues in the US West. Most western states manage groundwater use through a permitting system, but California has only recently begun to restrict groundwater use statewide with the 2014 passage of groundwater restrictions which target the elimination of groundwater overdraft practices by 2042. With groundwater extraction curtailed, crop production in the US West (a $95 billion industry annually) will be affected, and appropriate response strategies will be needed to ensure minimal disruption to food production and the regional economy. In this paper, we explore the adoption of alternative adaptive responses: (a) deficit irrigation; (b) switching to less water-intensive crops; (c) changing the extent of irrigated land (including fallowing); and (d) geographically shifting crop production. Employing an integrated modeling approach, we explicitly capture the interactions and feedbacks between local hydrology, changes in crop yields, crop and land use decision-making, changes in crop prices, and regional shifts in crop production. We find that the optimal adaptive response is spatially heterogeneous and comprises a portfolio of strategies. Southwestern states and California will be the most impacted by groundwater restrictions. The optimal responses in these states are to both adopt deficit irrigation strategies and reduce a portion of their irrigated croplands, resulting in a shift in crop production to northwestern states with a larger supply of water. The datasets detailed in this repository represent the output from these integrated models, specifically designed to support the analysis and visualization presented in the manuscript and supplemental information. These datasets, used in conjunction with the scripts available at our associated GitHub repository (https://github.com/pches/Femeena_etal_How_can_crop_production_adapt), enable the reproduction of figures and facilitate a comprehensive understanding of the optimal adaptive strategies in agriculture for mitigating water stress under varying groundwater extraction scenarios, as outlined in the abstract.

DNDCe↗

DOE OSTI2024

DECOVALEX-2023: Task E Final Report

This is the Task E final report for DECOVALEX-2023. Task E is focused on understanding thermal, two-phase hydrological, and mechanical (TH2M) processes, especially related to predicting brine migration in the excavation damaged zone around a heated excavation in salt. Salt is attractive as a disposal medium for radioactive waste because it is self-healing and is essentially impermeable and essentially non-porous in the far field (away from excavations). Investigation of the short-term (days to years) near-field (centimeters to tens of meters) behavior of salt is important for radioactive waste disposal because this early period strongly controls the amount of brine in a salt repository. Brine leads to corrosion of waste forms and waste packages, and possible dissolution of radionuclides with brine transport being a potential transport vector to the accessible environment. The main test case used in Task E is the ongoing Brine Availability Test in Salt (BATS) heater test located underground at the Waste Isolation Pilot Plant (WIPP) near Carlsbad, New Mexico, USA. The Task was divided into a series of Steps. Step 0 was an introduction to processes in salt, that included matching historical unheated brine inflow data from boreholes at WIPP and matching temperature observations during BATS heater test 1a. Step 1 included validation of models against a thermo-poroelastic analytical solution relevant to heated boreholes in salt, and two-phase flow around an excavation in salt. Step 2 required all the individual components covered in steps 0 and 1 to come together to match observed brine inflow behavior during the BATS 1a heater test. There were a range of approaches from the teams, from mechanistic to prescriptive. Given the uncertainties in the problem, some teams used one- or two-dimensional models of the processes, while other teams included more geometrical complexity in three-dimensional models. The key learning points from Task E have been: • Heat conduction through salt typically requires non-linear thermal conductivity (as a function of temperature), but most models do a good job matching observations, given appropriate adjustments to the applied power and some thermocouple locations. • Thermal pressurization requires coupled thermal-hydrological-mechanical (THM) responses that consider the thermal expansion of the fluid and solid phases. • Initialization of two-phase flow models around a borehole or excavation in salt are more realistically represented as “wetting up”, rather than “drying down” (i.e., the initial state after excavation is mostly dry, rather than mostly wet). • The BATS 1a heater test includes a significant release of brine after the end of heating, which requires a large increase in permeability to recreate. Task E has been a great learning experience for all the teams involved, and feedback from the modeling teams has led to changes in the design of follow-on BATS experiments, which are now ongoing underground at WIPP. There was a balance throughout the task between freedom to model phenomena how each team saw fit, and prescriptiveness in problem design to bring the modeling teams closer together to allow attribution of smaller differences between models to different modeling choices. The modeling approaches seem to go through two phases: an early phase of discovery or testing, and a later phase of refinement and improvement. In future modeling efforts, different field data could be used (e.g., BATS 2) and more time should be included in the processes for teams to make multiple model refinement or even significant changes to their conceptual model or setup, based on lessons learned from the modeling exercise.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2023

TRACER-MAP Field Campaign Report

During July-August 2022, the U.S. Department of Energy (DOE) Atmospheric System Research (ASR)-funded Tracking Aerosol Convection Interactions Experiment (TRACER)-MAP campaign completed an Atmospheric Radiation Measurement (ARM) user facility field study to measure and map aerosol, volatile organic compounds (VOC), trace gas, and select meteorological observations across Houston, Texas. That ASR project and ARM field campaign, TRACER-MAP, was designed to complement measurements made at the first ARM Mobile Facility (AMF1) by the Aerosol Observing System (AOS) during the TRACER campaign. In this manner, TRACER-MAP effectively extended aerosol measurements from the TRACER AMF deployment, increasing the spatial coverage across the Houston metropolitan area, characterizing a greater diversity of source mixtures (e.g., industrial, traffic, residential, and biogenic) and capturing air masses with differential aging of urban source emissions (e.g., downtown versus downwind). That rich data set now offers many possibilities for in-depth analysis that align with the ASR mission to “research aerosol processes that affect Earth’s radiative balance and hydrological cycle.”

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

High-Resolution Measurement of Soil Thermal Properties and Moisture Content Using a Novel Heated Fiber Optics Approach

Hydrological parameters are scale dependent. Efficient monitoring techniques capable of measuring hydrological parameters, such as soil moisture content (θ), over a wide range of spatial scales are essential for understanding the complexity of water and energy movement across the landscape. Techniques to measure θ over spatial scales in the range from centimeters to thousands of meters, however, are sorely lacking. Recent improvements in the distributed temperature sensing (DTS) technology supported the development of novel techniques to fill that gap. However, improvements in the accuracy and applicability of DTS techniques are still needed. This study investigates the possibility of improving the accuracy of the fiber optics dual-probe heat-pulse (FO-DPHP) DTS technique by using a new design to maintain the spacing between the FO-DPHP probes and by introducing a novel data interpretation approach. The accuracy of the novel FO-DPHP design was tested at different θ in a sand column experiment. The FO-DPHP measurements obtained using traditional and novel data interpretation approaches were compared against independent measurements from several calibrated soil water content (EC5) sensors. Monte-Carlo analyses were also performed to assess the impact of DTS measurement errors on the accuracy achieved using the data interpretation approaches. The novel design and data interpretation approach allowed for accurate measurements of soil thermal properties and θ without the need to perform a hard-to-achieve soil-specific calibration. Measured θ had mean errors and standard deviations <0.03 and <0.01 m 3 m -3 , respectively, for moisture conditions ranging from dry to near saturation. The standard deviation in the measured heat capacity was <0.01 MJ m -3 K -1 .

42 ENGINEERING↗

DOE OSTI2024

Mitigating drought mortality by incorporating topography into variable forest thinning strategies

Abstract Drought-induced productivity reductions and tree mortality have been increasing in recent decades in forests around the globe. Developing adaptation strategies hinges on an adequate understanding of the mechanisms governing the drought vulnerability of forest stands. Prescribed reduction in stand density has been used as a management tool to reduce water stress and wildfire risk, but the processes that modulate fine-scale variations in plant water supply and water demand are largely missing in ecosystem models. We used an ecohydrological model that couples plant hydraulics with groundwater hydrology to examine how within-stand variations in tree spatial arrangements and topography might mitigate forest vulnerability to drought at individual-tree and stand scales. Our results demonstrated thinning generally ameliorated plant hydraulic stress and improved carbon and water fluxes of the remaining trees, although the effectiveness varied by climate and topography. Variable thinning that adjusted thinning intensity based on topography-mediated water availability achieved higher stand productivity and lower mortality risk, compared to evenly-spaced thinning at comparable intensities. The results from numerical experiments provided mechanistic evidence that topography mediates the effectiveness of thinning and highlighted the need for an explicit consideration of within-stand heterogeneity in trees and abiotic environments when designing forest thinning to mitigate drought impacts.

Environmental Sciences & Ecology↗

DOE OSTI2024

Multi-scale impacts of climate change on hydropower for long-term water-energy planning in the contiguous United States

Climate change impacts on watersheds can potentially exacerbate water scarcity issues where water serves multiple purposes including hydropower. The long-term management of water and energy resources is still mostly approached in a siloed manner at different basins or watersheds, failing to consider the potential impacts that may concurrently affect many regions at once. There is a need for a large-scale hydropower modeling framework that can examine climate impacts across adjoining river basins and balancing authorities (BAs) and provide a periodic assessment at regional to national scales. Expanding from our prior assessment only for the United States (US) federal hydropower plants, we enhance and extend two regional hydropower models to cover over 85% of the total hydropower nameplate capacity and present the first contiguous US-wide assessment of future hydropower production under Coupled Model Intercomparison Project phase 6’s high-end Shared Socioeconomic Pathway 5-8.5 emission scenario using an uncertainty-aware multi-model ensemble approach. We present regional hydropower projections, using both BA regions and US Hydrologic Subregions (HUC4s), to consistently inform the energy and water communities for two future periods—the near-term (2020–2039) and the mid-term (2040–2059) relative to a historical baseline period (1980–2019). We find that the median projected changes in annual hydropower generation are typically positive—approximately 5% in the near-term, and 10% in the mid-term. However, since the risk of regional droughts is also projected to increase, future planning cannot overly rely on the ensemble median, as the potential of severe hydropower reductions could be overlooked. The assessment offers an ensemble of future hydropower generation projections, providing regional utilities and power system operators with consistent data to develop drought scenarios, design long duration storage and evaluate energy infrastructure reliability under intensified inter-annual and seasonal variability.

13 HYDRO ENERGY↗

DOE OSTI2025

Implementing Large-Scale CCS in Complex Geologic Reservoirs: Insights from Three Appalachian Basin Case Studies

This paper presents three design case studies for implementing large-scale geologic carbon storage in the Appalachian Basin region of the midwestern United States. While the Appalachian Basin has a challenging setting for carbon storage, the three case studies detailed in this article demonstrate that there are realistic options for implementing carbon storage in the basin. Carbonate rock formations, depleted hydrocarbon reservoirs, and moderate-porosity sandstones can be utilized as carbon-storage reservoirs in the Appalachian Basin. While these are not typical concepts for CO2 storage, the storage zones have advantages such as defined trapping mechanisms, multiple caprocks, and defined boundaries that are not always present in thick, permeable sandstones being targeted for many carbon-storage projects. The geologic setting, geotechnical parameters, and hydrologic setting for the three case studies are provided, along with the results of reservoir simulations of the CO2 injection-deployment strategies. The geological rock formations available for CO2 storage in the Appalachian Basin are more localized reservoirs with defined boundaries and finite storage capacities. Simulation results showed that accessing carbon-storage resources in these fields may require wellfields with 2–10 injection wells. However, these fields would have the capacity to inject 1–3 million metric tons of CO2 per year and up to 90 million metric tons of CO2 in total. The CO2 storage resources would fulfill decarbonization goals for many of the natural-gas power plants, cement plants, hydrogen plants, and refineries in the Appalachian Basin region.

Sminchak, Joel↗

DOE OSTI2023

Attaining freshwater and estuarine-water soil saturation in an ecosystem-scale coastal flooding experiment

Abstract Coastal upland forests are facing widespread mortality as sea-level rise accelerates and precipitation and storm regimes change. The loss of coastal forests has significant implications for the coastal carbon cycle; yet, predicting mortality likelihood is difficult due to our limited understanding of disturbance impacts on coastal forests. The manipulative, ecosystem-scale Terrestrial Ecosystem Manipulation to Probe the Effects of Storm Treatments (TEMPEST) experiment addresses the potential for freshwater and estuarine-water disturbance events to alter tree function, species composition, and ecosystem processes in a deciduous coastal forest in MD, USA. The experiment uses a large-unit (2000 m 2 ), un-replicated experimental design, with three 50 m × 40 m plots serving as control, freshwater, and estuarine-water treatments. Transient saturation (5 h) of the entire soil rooting zone (0–30 cm) across a 2000 m 2 coastal forest was attained by delivering 300 m 3 of water through a spatially distributed irrigation network at a rate just above the soil infiltration rate. Our water delivery approach also elevated the water table (typically ~ 2 m belowground) and achieved extensive, low-level inundation (~ 8 cm standing water). A TEMPEST simulation approximated a 15-cm rainfall event and based on historic records, was of comparable intensity to a 10-year storm for the area. This characterization was supported by showing that Hurricane Ida’s (~ 5 cm rainfall) hydrologic impacts were shorter (40% lower duration) and less expansive (80% less coverage) than those generated through experimental manipulation. Future work will apply TEMPEST treatments to evaluate coastal forest resilience to changing hydrologic disturbance regimes and identify conditions that initiate ecosystem state transitions.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Brine Availability Test in Salt: Thermal-Hydrological-Mechanical-Chemical Simulations of a Heated Borehole in Salt - 20239

The Brine Availability Test in Salt (BATS) is a collaboration between Los Alamos, Sandia, and Lawrence Berkeley National Laboratories that is being conducted to reduce the uncertainties associated with disposal of spent nuclear fuel (SNF) and high-level radioactive waste (HLW) in a hypothetical bedded salt repository. Bedded salt formations may be an acceptable host rock for disposal of nuclear waste due to salt's high thermal conductivity, extremely low permeability, and self-healing capability. In this paper, we report on the first round of the BATS project, a 'shakedown test' known as Phase 1s, with an emphasis on the supporting numerical modeling. The experiment was conducted at the Waste Isolation Pilot Plant (WIPP) using previously drilled horizontal boreholes. The test included a heater borehole in which temperature, pressure, and moisture was monitored, and two nearby temperature monitoring boreholes. Numerical simulations that reflect the 36-year-long history of activity at the WIPP site are necessary to develop the appropriate initial conditions. Testing with different heater designs reveals that a 750 W radiative heater within a borehole can achieve the 120 deg. C borehole wall temperature goal. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2024

How Fisheries Biologists Can Facilitate the Clean Energy Transition

Abstract Fisheries and aquatic biologists play a critical role in creating environmentally protective hydropower flow requirements that govern flow timing, frequency, magnitude, and rate of change. Hydropower's role in the U.S. electrical grid is expected to evolve in response to increased wind and solar generation as hydropower will be called upon to quickly ramp up and down in response to changes in wind and solar generation. For this reason, hydropower is expected to have increased value as fossil generation is phased out, even as rapid flow fluctuations linked with hydropower flexibility may strand fish, alter habitat, and create unsafe recreational conditions. We face a new challenge in facilitating the renewable energy transition—designing environmental flow requirements that protect against the impacts of flow fluctuations while allowing adequate hydropower flexibility to support a stable grid. In this paper, we discuss hydropower environmental flow requirements, operational flexibility, and electrical grid stability, their potential interactions, and opportunities to align environmental and power system needs to support healthy ecosystems, multiple water uses, and decarbonization of the electric grid.

13 HYDRO ENERGY↗

DOE OSTI2025

Stormwater Storage and Retention Within an Urban Prairie Wetland Complex

Climate change is expected to increase the frequency and severity of flooding in the Great Lakes region. In many cities, flood-control infrastructure is insufficient to protect against future climate conditions. Consequently, there is increasing focus on stormwater storage provided by urban greenspace, such as wetlands and prairies, but the ecohydrological behavior of these ecosystems is not well understood when they are embedded within cities. To improve understanding of hydrological connectivity between urban areas and natural greenspaces, we deployed a sensor network in Gensburg Markham Prairie (GMP), a large intact prairie-wetland complex in south suburban Chicago. We used the resulting high-frequency time-series data to assess surface-subsurface hydrologic dynamics between upland and low-lying wetland areas, interactions between the prairie and surrounding environment, and stormwater storage provided by the prairie. Rapid infiltration within the prairie during and after storm events provides subsurface flow that stores considerable water, flattens storm hydrographs, and increases the wetland hydroperiod. Much of the stormwater input to GMP derives from the surrounding cityscape. Consequently, storage within the prairie-wetland system reduces and slows stormwater discharge to downstream urban communities. For a typical 5-year 24-hr storm with 10.9 cm of rain, GMP stores 77,100 m 3 , 64% greater than the estimated direct rainfall volume onto the prairie, yielding 30,000 m 3 of offsite stormwater storage. This improved understanding of ecohydrological dynamics in urban prairies and wetlands informs the design and implementation of green infrastructure to meet growing needs for stormwater management.

Rivera, Vivien Anne [Northwestern University, Evan↗

DOE OSTI2020

Integrated Hydro-Terrestrial Modeling: Development of a National Capability

Water is one of our most important natural resources and is essential to our national economy and security. Multiple federal government agencies have mission elements that address national needs related to water. Each water-related agency champions a unique science and/or operational mission focused on advancing a portion of the nation’s ability to meet our water-related challenges. These diverse mission needs have engendered a rich and extensive base of water-related data and modeling capabilities. While useful for their intended purposes, these capabilities are not well integrated to address complex regional problems and overarching national problems. These major investments by a number of federal agencies, however, lay the foundation for an integrated hydro-terrestrial modeling and data infrastructure that will enhance knowledge, understanding, prediction, and management of the nation’s diverse water challenges. Creating a more seamless national hydro-terrestrial modeling and data capacity presents an enormous opportunity to advance operational as well as research capabilities leading to more effective water management. Advances are necessary not only in operational tools for forecasting but also in research to identify and resolve knowledge and data gaps that lead to unacceptable uncertainties in forecast outcomes. As such, close coordination across scientific, operational, and resource management communities is required. To this end, an interagency workshop on “Integrated Hydro-Terrestrial Modeling: Development of a National Capacity” was held at the National Science Foundation (NSF) headquarters in Alexandria, Virginia in September 2019, led jointly by the NSF, the U.S. Department of Energy (DOE) and the U.S. Geological Survey (USGS) and with broader interagency support provided through an interagency steering committee. This workshop provided a venue to bring together representatives of water-related agencies and their scientific partners (including university researchers) to initiate and refine a vision for a national Integrated Hydro-Terrestrial Modeling (IHTM) and data infrastructure and advance ideas towards its development. The workshop was designed to address three critical foci to advance the development of a national IHTM capacity: “Priority Water Challenges” around which to motivate and initiate development; Technical and methodological obstacles related to data and modeling; Organizational, structural, and cultural barriers that heretofore have impeded integration of capabilities across the federal and research landscapes. The following “Priority Water Challenge” domain areas represent targets for initiating development of the IHTM and were identified and selected in alignment with priorities of the administration’s Water Sub-Cabinet: (1) Nutrient loading, hypoxia, and harmful algal blooms; (2) Water availability in the western United States; and (3) Extreme weather-related water hazards. These water challenges span agency mission boundaries and encompass a broad range of geographies, complex system dynamics and feedbacks, and critical processes spanning hydrological, climatic, and biophysical systems as well as land-use/land-cover, agricultural, built infrastructure, societal, economic, and decisional environments. These three Priority Water Challenges cannot be fully addressed without leveraging complementary and synergistic capabilities across multiple agencies.

99 GENERAL AND MISCELLANEOUS↗