Search NASA⌕ Search

SEARCH · Search NASA

Results for “INTERFACES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Investigations of interface spin asymmetry and interfacial resistance in Fe{sub x}Co{sub 100−x}/Ag interface

We investigated current-perpendicular-to-plane (CPP) magnetotransport parameters of Fe{sub x}Co{sub 100−x}/Ag interfaces: interface specific resistance (AR{sub F/N}), extended interface resistance (AR{sup *}{sub F/N}), and spin scattering asymmetry (γ). We also investigated the dependence of interfacial parameters on the giant magnetoresistance effect with CPP geometry. For measuring these parameters, we prepared magnetic multilayers and pseudo spin valves (PSVs), combining the ferromagnetic (F) alloys Fe, Co, Fe{sub 50}Co{sub 50}, and Fe{sub 30}Co{sub 70} with the nonmagnetic (N) metal Ag. In all cases, the largest AR{sub F/N} value was found to be ∼0.68 mΩ μm{sup 2} with an enhanced AR{sup *}{sub F/N} value of ∼1.9 mΩ μm{sup 2} for a (001)-oriented Fe/Ag interface, which suggests that spin-up and spin-down electrons on the Fermi surface have very different transmission probabilities. Such an interface can act as a spin filter through which only one type of electrons can pass.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Band offsets for mismatched interfaces: The special case of ZnO on CdTe (001)

High-quality planar interfaces between ZnO and CdTe would be useful in optoelectronic applications. Although CdTe is zinc blende with cubic lattice constant a = 6.482 Å while ZnO is hexagonal wurtzite with a = 3.253 Å and c = 5.213 Å, (001)-oriented cubic zinc blende ZnO films could be stabilized epitaxially on a CdTe (001) surface in an √2 × √2 R45° configuration with a lattice mismatch of <0.5%. Modeling such a configuration allows density-functional total-energy electronic-structure calculations to be performed on several interface arrangements (varying terminations and in-plane fractional translations) to identify the most likely form of the interface, and to predict valence-band offsets between CdTe and ZnO in each case. Growth of ZnO on Te-terminated CdTe(001) is predicted to produce small or even negative (CdTe below ZnO) valence band offsets, resulting in a Type I band alignment. Growth on Cd-terminated CdTe is predicted to produce large positive offsets for a Type II alignment as needed, for example, in solar cells. To corroborate some of these predictions, thin layers of ZnO were deposited on CdTe(001) by pulsed laser deposition, and the band alignments of the resulting heterojunctions were determined from x-ray photoelectron spectroscopy measurements. Although zinc blende ZnO could not be confirmed, the measured valence band offset (2.0–2.2 eV) matched well with the predicted value.

36 MATERIALS SCIENCE↗

Adaptive Interface-PINNs (AdaI-PINNs): An Efficient Physics-Informed Neural Networks Framework for Interface Problems

Here, we present an efficient physics-informed neural networks (PINNs) framework, termed Adaptive Interface-PINNs (AdaI-PINNs), to improve the modeling of interface problems with discontinuous coefficients and/or interfacial jumps. This framework is an enhanced version of its predecessor, Interface PINNs or I-PINNs (Sarma et al.; https://doi.org/10.1016/j.cma.2024.117135), which involves domain decomposition and assignment of different predefined activation functions to the neural networks in each subdomain across a sharp interface, while keeping all other parameters of the neural networks identical. In AdaI-PINNs, the activation functions vary solely in their slopes, which are trained along with the other parameters of the neural networks. This makes the AdaI-PINNs framework fully automated without requiring preset activation functions. Comparative studies on one-dimensional, two-dimensional, and three-dimensional benchmark elliptic interface problems reveal that AdaI-PINNs outperform I-PINNs, reducing computational costs by 2-6 times while producing similar or better accuracy.

97 MATHEMATICS AND COMPUTING↗

Interface-Induced and Interface-Enhanced Superconductivity

Among the various theoretical mechanisms proposed to reach a higher Tc, the interface mechanism in different forms has been the one most explored, and it provides continual inspiration and hope for realizing the ultimate goal for researchers in the superconductivity field—room-temperature superconductivity. Difficulties do exist, as most of the materials proposed to exhibit the interfacial mechanism are artificially formed heterostructures and are by nature delicate and easily disturbed by strain and change in the stoichiometry at the interface. The discoveries of superconductivity in naturally assembled single crystals of rare earth (R)-doped CaFe2As2 (Ca122) with a Tc up to 49 K and undoped CaFe2As2 with a Tc up to 25 K have opened an alternate route to tackle the problem. The experimental observation has provided the most direct evidence for interface-induced superconductivity in Ca122 to date and possibly in R-doped Ca122. Given the fact that neither chemical doping nor the application of physical pressure has ever induced a Tc higher than 40 K in bulk FeSe, the reports of Tc up to 45–109 K in FeSe/STO thin films demonstrate that FeSe/STO is an ideal system in which to explore interface-enhanced superconductivity. Here we review the above three specific examples of our effort toward superconductors of higher Tc to demonstrate that the interface mechanism may be a promising paradigm to achieve higher Tc.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystal Structure of the APOBEC3G Catalytic Domain Reveals Potential Oligomerization Interfaces

APOBEC3G is a DNA cytidine deaminase that has antiviral activity against HIV-1 and other pathogenic viruses. In this study the crystal structure of the catalytically active C-terminal domain was determined to 2.25 {angstrom}. This structure corroborates features previously observed in nuclear magnetic resonance (NMR) studies, a bulge in the second {beta} strand and a lengthening of the second {alpha} helix. Oligomerization is postulated to be critical for the function of APOBEC3G. In this structure, four extensive intermolecular interfaces are observed, suggesting potential models for APOBEC3G oligomerization. The structural and functional significance of these interfaces was probed by solution NMR and disruptive variants were designed and tested for DNA deaminase and anti-HIV activities. The variant designed to disrupt the most extensive interface lost both activities. NMR solution data provides evidence that another interface, which coordinates a novel zinc site, also exists. Thus, the observed crystallographic interfaces of APOBEC3G may be important for both oligomerization and function.

36 MATERIALS SCIENCE↗

Electrolyte layering at the calcite(104)-water interface indicated by Rb + - and Se(VI) K-edge resonant interface diffraction

Calcite–water interface reactions are of major importance in various environmental settings as well as in industrial applications. Here we present resonant interface diffraction results on the calcite(104)–aqueous solution interface, measured in solutions containing either 10 mmol L -1 RbCl or 0.5 mmol L -1 Se(VI). Results indicate that Rb + ions enter the surface adsorbed water layers and adsorb at the calcite(104)–water interface in an inner-sphere fashion. A detailed analysis based on specular and off-specular resonant interface diffraction data reveals three distinct Rb + adsorption species: one 1.2 Å above the surface, the second associated with surface adsorbed water molecules 3.2 Å above the surface, and the third adsorbed in an outer-sphere fashion 5.6 Å above the surface. A peak in resonant amplitude between L = 1.5 and L = 3.0 is interpreted as signal from a layered electrolyte structure. The presence of a layered electrolyte structure seems to be confirmed by data measured in the presence of Se(VI).

Heberling, F.↗

Patterned surface anchoring of nematic droplets at miscible liquid–liquid interfaces

We report on the internal configurations of droplets of nematic liquid crystals (LCs; 10–50 μm-in-diameter; comprised of 4-cyano-4'-pentylbiphenyl and 4-(3-acryloyloxypropyloxy)benzoic acid 2-methyl-1,4-phenylene ester) sedimented from aqueous solutions of sodium dodecyl sulfate (SDS) onto interfaces formed with pure glycerol. We observed a family of internal LC droplet configurations and topological defects consistent with a remarkably abrupt transition from homeotropic (perpendicular) to tangential anchoring on the surface of the LC droplets in the interfacial environment. Calculations of the interdiffusion of water and glycerol at the aqueous–glycerol interface revealed the thickness of the diffuse interfacial region of the two miscible liquids to be small (0.2–0.5 μm) compared to the diameters of the LC droplets on the experimental time-scale (15–120 minutes), leading us to hypothesize that the patterned surface anchoring was induced by gradients in concentration of SDS and glycerol across the diameter of the LC droplets in the interfacial region. This hypothesis received additional support from experiments in which the time of sedimentation of the LC droplets onto the interface was systematically increased and the droplets were photo-polymerized to preserve their configurations: the configurations of the LC droplets were consistent with a time-dependent decrease in the fraction of the surface area of each droplet exhibiting homeotropic anchoring. Specifically, LC droplets with <10% surface area with tangential anchoring exhibited a bulk point defect within the LC droplet, whereas droplets with >10% surface area with tangential anchoring exhibited a boojum defect within the tangential region and a disclination loop separated the regions with tangential and homeotropic anchoring. The topological charge of these LC droplet configurations was found to be consistent with the geometrical theorems of Poincaré and Gauss and also well-described by computer simulations performed by minimization of a Landau–de Gennes free energy. Additional experimental observations (e.g., formation of “Janus-like” particles with one hemisphere exhibiting tangential anchoring and the other perpendicular anchoring) and simulations (e.g., a size-dependent set of LC droplet configurations with <10% surface area exhibiting tangential anchoring) support our general conclusion that placement of LC droplets into miscible liquid–liquid interfacial environments with compositional gradients can lead to a rich set of LC droplet configurations with symmetries and optical characteristics that are not encountered in LC droplet systems in homogeneous, bulk environments. Finally, our results also reveal that translocation of LC droplets across liquid–liquid interfaces can define new transition pathways that connect distinct configurations of LC droplets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rate Theory of Ion Pairing at the Water Liquid-Vapor Interface: A Case of Sodium Iodide

Studies of ion pairing at interfaces have been intensified recently because of their importance in many chemical reactive phenomena such as ion–ion interactions that are affected by interfaces and their influence on kinetic processes. In this study, we performed simulations to examine the thermodynamics and kinetics of small polarizable sodium iodide ions in the bulk and near the water liquid–vapor interface. Using classical transition state theory, we calculated the dissociation rates, and corrected them with transmission coefficients obtained from the reactive flux formalism and Grote-Hynes theory. Our results show that in addition to affecting the free energy of ions in solution, the interfacial environments significantly influence the kinetics of ion pairing. Results on the relaxation time obtained using the reactive flux formalism and Grote-Hynes theory present an unequivocal picture that the interface suppresses ion dissociation. The effects of the use of molecular models on the ion interactions as well as the ion-pair configurations at the interface also are quantified and discussed. Acknowledgments This work was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences. The calculations were carried out using computer resources provided by the Office of Basic Energy Sciences.

Dang, Liem X.↗

The Shifted Interface Method: A flexible approach to embedded interface computations

We propose a new embedded finite element method to simulate partial differential equations over domains with internal interfaces. Our approach belongs to the family of surrogate/approximate interface methods and relies on the idea of shifting the location and value of jump interface conditions. This choice has the goal of preserving optimal convergence rates while avoiding small cut cells and related problematic issues, typical of traditional embedded methods. The proposed approach is accurate, robust, efficient, and simple to implement. We apply this concept to internal interface computations in the context of the mixed Poisson problem, also known as the Darcy flow problem. An extensive set of numerical tests is provided to demonstrate the performance of the proposed approach.

42 ENGINEERING↗

Interface- and discontinuity-aware numerical schemes for plasma 3-T radiation diffusion in two and three dimensions

A set of numerical schemes is developed for two- and three-dimensional time-dependent 3-T radiation diffusion equations in systems involving multi-materials. To resolve sub-cell structure, interface reconstruction is implemented within any cell that has more than one material. Therefore, the system of 3-T radiation diffusion equations is solved on two- and three-dimensional polyhedral meshes. The focus of the development is on the fully coupling between radiation and material, the treatment of nonlinearity in the equations, i.e., in the diffusion terms and source terms, treatment of the discontinuity across cell interfaces in material properties, the formulations for both transient and steady states, the property for large time steps, and second order accuracy in both space and time. The discontinuity of material properties between different materials is correctly treated based on the governing physics principle for general polyhedral meshes and full nonlinearity. The treatment is exact for arbitrarily strong discontinuity. The scheme is fully nonlinear for the full nonlinearity in the 3-T diffusion equations. Three temperatures are fully coupled and are updated simultaneously. The scheme is general in two and three dimensions on general polyhedral meshes. The features of the scheme are demonstrated through numerical examples for transient problems and steady states. The effects of some simplifications of numerical schemes are also shown through numerical examples, such as linearization, simple average of diffusion coefficient, and approximate treatment for the coupling between radiation and material.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantifying Photocurrent Loss of a Single Particle–Particle Interface in Nanostructured Photoelectrodes

Particle–particle interfaces are ubiquitous in nanostructured photoelectrodes and photovoltaics, which are important devices for solar energy conversion. Furthermore, these interfaces are expected to cause performance losses in these devices, but how much loss they would incur is poorly defined. Here we use a subparticle photoelectrochemical current measurement, in combination with specific photoelectrode configurations, to quantify the current losses from single particle–particle interfaces formed between individual TiO 2 nanorods operating as photoanodes in aqueous electrolytes. We find that a single interface leads to ~20% photocurrent loss (i.e., ~80% retention of the original current). Such quantitative, first-of-its-kind, information provides a metric for guiding the optimization and design of nanostructured photoelectrodes and photovoltaics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of Thermal Interface Materials Using Phase-Sensitive Transient Thermoreflectance Technique: Preprint

With increasing power density in electronics packages/modules, thermal resistances at multiple interfaces are a bottleneck to efficient heat removal from the package. In this work, the performance of thermal interface materials such as grease, thermoplastic adhesives and diffusion-bonded interfaces are characterized using the phase-sensitive transient thermoreflectance technique. A multi-layer heat conduction model was constructed and theoretical solutions were derived to obtain the relation between phase lag and the thermal/physical properties. This technique enables simultaneous extraction of the contact resistance and bulk thermal conductivity of the TIMs. With the measurements, the bulk thermal conductivity of Dow TC-5022 thermal grease (70 to 75 um bondline thickness) was 3 to 5 W/(m-K) and the contact resistance was 5 to 10 mm2-K/W. For the Btech thermoplastic material (45 to 80 μm bondline thickness), the bulk thermal conductivity was 20 to 50 W/(m-K) and the contact resistance was 2 to 5 mm2-K/W. Measurements were also conducted to quantify the thermal performance of diffusion-bonded interface for power electronics applications. Results with the diffusion-bonded sample showed that the interfacial thermal resistance is more than one order of magnitude lower than those of traditional TIMs, suggesting potential pathways to efficient thermal management.

30 DIRECT ENERGY CONVERSION↗

Band-Gap Engineering at a Semiconductor-Crystalline Oxide Interface

The epitaxial growth of crystalline oxides on semiconductors provides a pathway to introduce new functionalities to semiconductor devices. Key to electrically coupling crystalline oxides with semiconductors to realize functional behavior is controlling the manner in which their bands align at interfaces. Here we apply principles of band gap engineering traditionally used at heterojunctions between conventional semiconductors to control the band offset between a single crystalline oxide and a semiconductor. Reactive molecular beam epitaxy is used to realize atomically abrupt and structurally coherent interfaces between SrZr x Ti 1-x O 3 and Ge, in which the band gap of the former is enhanced with Zr content x. We present structural, electrical and photoemission characterization of SrZr x Ti 1-x O 3 3-Ge heterojunctions for x = 0.2 to 0.75 and demonstrate the band offset can be tuned from type-II to type-I. The type-I band offset provides a platform to integrate the dielectric, ferroelectric and ferromagnetic functionalities of oxides with semiconducting devices.

42 ENGINEERING↗