Search NASA⌕ Search

SEARCH · Search NASA

Results for “INTERMETALLIC COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Hydrogen reduction and metal-support interaction in a metastable metal-oxide system: Pd on rhombohedral In{sub 2}O{sub 3}

Highlights: • Metal-Support interaction in a metastable Pd/rh-In{sub 2}O{sub 3} material. • No influence of metal-support interaction on phase transformation rh-In{sub 2}O{sub 3}→c-In{sub 2}O{sub 3}. • Sequence of hydride, intermetallic compound formation and phase transformation. • High structural stability of reduced rh-In{sub 2}O{sub 3} and associated oxygen vacancies. • Metastable rh-In{sub 2}O{sub 3} more effective in initial intermetallic formation than c-In{sub 2}O{sub 3}. - Abstract: Structural and chemical consequences of reactive metal-support interaction (RMSI) effects occurring under hydrogen reduction in a metastable metal-oxide system have been exemplified for small PdO particles loaded onto rhombohedral In{sub 2}O{sub 3} (PdO/rh-In{sub 2}O{sub 3}) using synchrotron-based in situ X-ray diffraction experiments at temperatures up to 500 °C. rh-In{sub 2}O{sub 3} is a meta-stable In{sub 2}O{sub 3} polymorph that is prone to gas-phase dependent phase transformation to cubic In{sub 2}O{sub 3} (c-In{sub 2}O{sub 3}). Cross-influence of metal-support interaction and phase transformation can therefore be expected in similar temperature regimes. To separate both effects, comparable experiments have also been conducted on pure rh-In{sub 2}O{sub 3}. Phase transformation of pure rh-In{sub 2}O{sub 3} to cubic In{sub 2}O{sub 3} in hydrogen occurs between 415 °C and 450 °C. On Pd/rh-In{sub 2}O{sub 3}, a sequence of PdO reduction to Pd metal, followed by PdH{sub 0.706} hydride formation and subsequently, InPd and In{sub 3}Pd{sub 2} intermetallic compound formation have been observed between 30 °C and 500 °C. After the intermetallic compound formation is finished at around 400 °C, the phase transformation to c-In{sub 2}O{sub 3} sets in at exactly the same temperature as on pure rh-In{sub 2}O{sub 3} and extends over the same temperature range. This proves that the phase transformation of rh-In{sub 2}O{sub 3} to c-In{sub 2}O{sub 3} is not influenced by the reduction and the intermetallic compound formation. In contrast to Pd on c-In{sub 2}O{sub 3}, In-Pd compound formation from rh-In{sub 2}O{sub 3} occurs at much lower temperatures (230 °C vs. 300 °C), despite finally approaching the same compound stoichiometries (InPd and In{sub 3}Pd{sub 2}). This points to a high structural stability of reduced rh-In{sub 2}O{sub 3}/stability of oxygen vacancies (compared to c-In{sub 2}O{sub 3}) as well as to facilitated diffusion of reduced In(-O) species at low temperatures.

36 MATERIALS SCIENCE↗

Friction stir welding joint of dissimilar materials between AZ31B magnesium and 6061 aluminum alloys: Microstructure studies and mechanical characterizations

Friction stir welding is an efficient manufacturing method for joining dissimilar alloys, which can dramatically reduce grain sizes and offer high mechanical joint efficiency. Lap FSW joints between dissimilar AZ31B and Al 6061 alloy sheets were made at various tool rotation and travel speeds. Rotation and travel speeds varied between 560–1400 r/min and 16–40 mm/min respectively, where the ratio between these parameters was such that nearly constant pitch distances were applied during welding. X-ray diffraction pattern (XRD), optical microscopy images (OM), electron probe microanalysis (EPMA) and scanning electron microscopy equipped with an energy-dispersive X-ray spectroscopy (SEM-EDS) were used to investigate the microstructures of the joints welded. Intermetallic phases including Al{sub 12}Mg{sub 17} (γ) and Al{sub 3}Mg{sub 2} (β) were detected in the weld zone (WZ). For different tool rotation speeds, the morphology of the microstructure in the stir zone changed significantly with travel speed. Lap shear tensile test results indicated that by simultaneously increasing the tool rotation and travel speeds to 1400 r/min and 40 mm/min, the joint tensile strength and ductility reached a maximum. Microhardness measurements and tensile stress–strain curves indicated that mechanical properties were affected by FSW parameters and mainly depended on the formation of intermetallic compounds in the weld zone. In addition, a debonding failure mode in the Al/Mg dissimilar weld nugget was investigated by SEM and surface fracture studies indicated that the presence of intermetallic compounds in the weld zone controlled the failure mode. XRD analysis of the fracture surface indicated the presence of brittle intermetallic compounds including Al{sub 12}Mg{sub 17} (γ) and Al{sub 3}Mg{sub 2} (β). - Highlights: • Dissimilar Al/Mg joint was obtained by lap friction stir welding technique. • Effect of rotation and travel speeds on the formation of intermetallic compounds • Microstructure and chemical studies including metallography, XRD, SEM-EDS, and EPMA • Mechanical property tests such as stress–strain curves, failure load and hardness • IMCs as Al{sub 3}Mg{sub 2} and Al{sub 12}Mg{sub 17} were identified in weld nugget and at Al/Mg interface.

36 MATERIALS SCIENCE↗

Overview of Liquid-Solid Reaction Mechanisms and Kinetics of MBe13 Formation for Lanthanide-Beryllium and Actinide-Beryllium Systems

Molten rare-earth elements form intermetallic compounds with solid beryllium of the form MBe13, where M represents any of the rare-earth metals (lanthanides). Importantly, an intermetallic compound with the same stoichiometry is formed between liquid plutonium and solid beryllium. These lanthanide and actinide intermetallic compounds are of interest because of their high melting points (in excess of 1500 °C) and simple (cubic) crystallographic lattice. Despite the possible useful properties of these intermetallic compounds, the kinetics and thermodynamics of their formation have not been well quantified. A series of experiments was performed at Los Alamos National Laboratory in the 1990s in an attempt to ascertain the mechanism responsible for intermetallic formation in a variety of lanthanide-beryllium and actinide-beryllium combinations. These data are reviewed and analyzed in the present report. A kinetic analysis is applied where possible to compare interactions between solid beryllium and molten lanthanum, cerium, praseodymium, samarium, and ytterbium; these results are further compared with data collected for the plutonium-beryllium system.

36 MATERIALS SCIENCE↗

Designed metal-insulator transition in low-symmetry magnetic intermetallics

Compounds exhibiting half-metallic character and metal-insulator transitions draw considerable attention in condensed-matter and materials physics due to their potential use in spintronics. Here we show that specific electron doping plays a crucial role in tailoring thermodynamic, structural, electronic, and magnetic properties of materials derived from low-symmetry magnetic intermetallics, exemplified on triclinic Mn 4 Al 11 . Upon chemical doping of Al by Ge, we predict improved phase stability and adherence to a generalized “18-n rule” governing closed-shell configurations in intermetallic with narrow bandgaps. Validating experiments include measurements of phase stability and electronic transport properties of electron-doped Mn 4 Al 10 Ge that crystallizes in the Mn 4 Al 11 -type structure, confirming the bandgap opening as predicted by chemical analysis and density-functional theory. Here we also demonstrate theoretically that hydrostatic pressure enhances the predicted half-metallic gap in the up-spin channel, which leads to a ferrimagnetic-to-ferromagnetic transition driven by Mn-Mn charge ordering in the Mn 4 Al 11 parent. We have also discussed the generality of our approach in predicting the design of other classes of intermetallics including half and full Heusler compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Correction: Anharmonic effects on the dynamical stability of Ce–Co–Cu intermetallic ternary compounds

Correction for ‘Anharmonic effects on the dynamical stability of Ce–Co–Cu intermetallic ternary compounds’ by Wei-Shen Tee et al., RSC Adv., 2026, 16, 14395–14405, https://doi.org/10.1039/D5RA09680D. In the original article, the Acknowledgements section was omitted. The Acknowledgements section for this article is given below.

Tee, Wei-Shen [Ames Laboratory (AMES), Ames, IA (U↗

Flow Patterns, Microstructure and Mechanical Properties of AZ31/Al6061 Dissimilar Friction Stir-Welded Joints

Dissimilar joints between die-cast AZ31 and extruded Al6061-T6 were joined using friction stir welding technology at a constant transverse speed (50 mm/min) and rotation rate of 800 or 1000 rpm. The flow patterns, microstructure evolution and intermetallic compounds in dissimilar joints were studied by optical and scanning electron microscopy. The relationship between microstructure and tensile properties was analyzed. The microhardness distribution along the horizontal centerline in cross section was investigated. Local flow without obvious mixing existed between Mg and Al metals in the tool shoulder-affected zone. For the tool-pin-affected zone, two typical zones, namely, the “extrusion zone” and “flow zone” existed because of the different flow modes of the plastic metals. The phase analysis showed that intermetallic compounds, including Al{sub 12}Mg{sub 17} and Al{sub 3}Mg{sub 2} formed in banded structures. Phase analysis showed that a joint with welding parameters of 800 rpm and 50 mm/min (Joint-500) had good mechanical properties because of the more uniform microstructure distribution and fewer intermetallic compounds. Fracture analysis indicated some microvoids and lamellate intermetallic compounds in the fracture surface of the joint with welding parameters of 1000 rpm and 50 mm/min (Joint-1000), which deteriorated its tensile strength significantly.

36 MATERIALS SCIENCE↗

Alternative Process for Manufacturing of Thin Layers of Boron for Neutron Measurement

Due to the worldwide shortage of helium 3, Boron-lined proportional counters are developed intensively by several groups. Up to now, thin boron containing layers for neutron detectors are essentially produced by sputtering of boron carbide (B{sub 4}C). This technology provides high quality films but it is slow and expensive. Our paper describes a novel and inexpensive technology for producing boron layers. This technology is based on chemical synthesis of boron 10 nanoparticles, and on electrophoretic deposition of these particles on metallic plates, or on metallic pieces with more complex shapes. The chemical synthesis consists in: - Heating boron 10 with lithium up to 700 deg. C under inert atmosphere: an intermetallic compound, LiB, is produced; - Hydrolysing this intermetallic compound: LiB + H{sub 2}O → B + Li{sup +} + OH{sup -} + 1/2H{sub 2}, where B is under the form of nanoparticles; - Purifying the suspension of boron nanoparticles in water, from lithium hydroxide, by successive membrane filtrations; - Evaporating the purified suspension, in order to get a powder of nanoparticles. The obtained nanoparticles have size around 300 nm, with a high porosity, of about 50%. This particle size is equivalent to about 150 nm massive particles. The nanoparticles are then put into suspension in a specific solvent, in order to perform deposition on metallic surfaces, by electrophoretic method. The solvent is chosen so that it is not electrolysed even under voltages of several tens of volts. An acid is dissolved into the solvent, so that the nanoparticles are positively charged. Deposition is performed on the cathode within about 10 min. The cathode could be an aluminium plate, or a nickel coated aluminium plate. Homogeneous deposition may also be performed on complex shapes, like grids in a Multigrid detector. A large volume of pieces, can be coated with a Boron-10 film in a few hours. The thickness of the layer can be adjusted according to the required neutron detection characteristics, between 0,5 to 5 μm (equivalent to 0,25 to 2.5 massive layer). The thickness is homogenous within a ±20% range. The layer is an almost pure {sup 10}B layer (90%). The ratio of the amount of deposed boron 10 to the amount of raw boron 10 used is more than 80%. Hence, another advantage of this technique is that Boron 10 will be deposited on the cathodes only, without loss of this expensive material. 2 grids of a Multi-Grid detector have been coated with pure Boron by using this technique. The film structure has been analysed with a microscope and the detector has been tested on a monochromatic neutron beam line. Preliminary results will be shown. (authors)

36 MATERIALS SCIENCE↗

Relationship between morphologies and orientations of Cu{sub 6}Sn{sub 5} grains in Sn3.0Ag0.5Cu solder joints on different Cu pads

The morphologies and orientations of Cu{sub 6}Sn{sub 5} intermetallic compounds in the Sn3.0Ag0.5Cu solder joints both on polycrystalline and single crystal Cu pads under different peak reflow temperatures and times above liquids were investigated. The relationship between Cu{sub 6}Sn{sub 5} grain orientations and morphologies was clarified. At the interface of Sn3.0Ag0.5Cu/polycrystalline Cu pad, scalloped Cu{sub 6}Sn{sub 5} intermetallic compounds formed at 250 °C and roof shape Cu{sub 6}Sn{sub 5} formed at 300 °C. Both scalloped Cu{sub 6}Sn{sub 5} and roof shape Cu{sub 6}Sn{sub 5} had a preferred orientation of (0001) plane being parallel to polycrystalline Cu pad surface. Besides, the percentage of large angle grain boundaries increased as the peak reflow temperature rose. At the interface of Sn3.0Ag0.5Cu/(111) single crystal Cu pad, the Cu{sub 6}Sn{sub 5} intermetallic compounds were mainly scallop-type at 250 °C and were prism type at 300 °C. The prismatic Cu{sub 6}Sn{sub 5} grains grew along the three preferred directions with the inter-angles of 60° on (111) single crystal Cu pad while along two perpendicular directions on (100) single crystal Cu pad. The orientation relationship between Cu{sub 6}Sn{sub 5} grains and the single crystal Cu pads was investigated by electron backscatter diffraction technology. In addition, two types of hollowed Cu{sub 6}Sn{sub 5} intermetallic compounds were found inside the joints of polycrystalline Cu pads. The long hexagonal Cu{sub 6}Sn{sub 5} strips were observed in the joints reflowing at 250 °C while the hollowed Cu{sub 6}Sn{sub 5} strips with the ‘▪’ shape cross-sections appeared at 300 °C, which was attributed to the different grain growth rates of different Cu{sub 6}Sn{sub 5} crystal faces. - Highlights: • The orientation of interfacial Cu{sub 6}Sn{sub 5} grains was obtained by EBSD technology. • Two types of hollowed Cu{sub 6}Sn{sub 5} strips were found at different temperatures. • The formation mechanism of hollowed Cu{sub 6}Sn{sub 5} was elaborated based on Bravais law. • The relationship between Cu{sub 6}Sn{sub 5} grain orientations and morphologies was clarified.

36 MATERIALS SCIENCE↗

Structure and properties of rhombohedral CePd{sub 3}Ga{sub 8}: A variant of the cubic parent compound with BaHg{sub 11} structure type

Single crystals of a new intermetallic gallide, R-CePd{sub 3}Ga{sub 8}, have been synthesized from excess molten gallium. Single-crystal X-ray diffraction reveals that R-CePd{sub 3}Ga{sub 8} crystallizes in the R-3m space group with a=b=c=8.4903(10) A and {alpha}={beta}={gamma}=89.993(17). R-CePd{sub 3}Ga{sub 8} is a variant of the cubic BaHg{sub 11} structure type with three structural units: a Ce-centered polyhedron, a distorted cube of Pd{sub 2}Ga{sub 6} and a Pd-centered cuboctahedron. The distortions of these units are compared to undistorted analogous units in intermetallic compounds with BaHg{sub 11} structure type. Field and temperature-dependent magnetization measurements on R-CePd{sub 3}Ga{sub 8} reveal a paramagnetic material with strong antiferromagnetic correlations and a magnetization consistent with Ce{sup 3+}. Electrical resistance measurements indicate Kondo behavior between localized Ce{sup 3+} magnetic moments. - Graphical Abstract: Single crystals of CePd{sub 3}Ga{sub 8} have been synthesized from Ga flux. This new compound is the first rhombohedral variant of the cubic BaHg{sub 11} structure type. Highlights: Black-Right-Pointing-Triangle Single crystals of CePd{sub 3}Ga{sub 8} were synthesized from gallium flux. Black-Right-Pointing-Triangle CePd{sub 3}Ga{sub 8} is the first rhombohedral variant of the cubic BaHg{sub 11} structure type. Black-Right-Pointing-Triangle Paramagnetic with antiferromagnetic correlations. Black-Right-Pointing-Triangle Magnetization consistent with Ce{sup 3+}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Processing and Characterization of Ag-Cu-Sn Brazing Alloy Prepared by a Mechanical Alloying Method

Mechanical alloying was used to prepare an Ag-Cu-Sn brazing alloy with the low amounts of intermetallic compounds. X-ray diffraction and differential scanning calorimetry were carried out to investigate the phase transformation of the as-milled samples. It seemed that the intermetallic compounds experienced the stage of synthesis-decomposition-resynthesis in the ball milling process. By controlling the ball milling time and tin contents, the solid solution phases of Ag (Cu, Sn) and Ag (Cu) were achieved in the 60Ag30Cu10Sn sample after milling for 40 h. Although the intermetallic compound will be generated during the brazing process, the improvement of their distributed morphology is beneficial for the good bonding interface of the joint with stainless steel substrate.

36 MATERIALS SCIENCE↗

Fiber Laser Welding–Brazing Characteristics of Dissimilar Metals AZ31B Mg Alloys to Copper with Mg-Based Filler

Fiber laser welding–brazing of 1-mm-thick AZ31B Mg alloys to 1.5-mm-thick copper (T2) with Mg-based filler was performed in a lap configuration. The weld appearance, interfacial microstructure and mechanical properties were investigated with different heat inputs. The results indicated that processing windows for optimizing appropriate welding parameters were relatively narrow in this case. Visually acceptable joints with certain strength were achieved at appropriate welding parameters. The maximum tensile-shear fracture load of laser-welded-brazed Mg/Cu joint could reach 1730 N at the laser power of 1200 W, representing 64.1% joint efficiency relative to AZ31Mg base metal. The eutectic structure (α-Mg + Mg{sub 2}Cu) and Mg-Cu intermetallic compound was observed at the Mg/Cu interface, and Mg-Al-Cu ternary intermetallic compound were identified between intermetallics and eutectic structure at high heat input. All the joints fractured at the Mg-Cu interface. However, the fracture mode was found to differ. For laser power of 1200 W, the surface was characterized by tearing edge, while that with poor joint strength was almost dominated by smooth surface or flat tear pattern.

36 MATERIALS SCIENCE↗

Crystal structure and low-energy Einstein mode in ErV{sub 2}Al{sub 20} intermetallic cage compound

Single crystals of a new ternary aluminide ErV{sub 2}Al{sub 20} were grown using a self-flux method. The crystal structure was determined by powder X-ray diffraction measurements and Rietveld refinement, and physical properties were studied by means of electrical resistivity, magnetic susceptibility and specific heat measurements. These measurements reveal that ErV{sub 2}Al{sub 20} is a Curie-Weiss paramagnet down to 1.95 K with an effective magnetic moment μ{sub eff} =9.27(1) μ{sub B} and Curie-Weiss temperature Θ{sub CW} =−0.55(4) K. The heat capacity measurements show a broad anomaly at low temperatures that is attributed to the presence of a low-energy Einstein mode with characteristic temperature Θ{sub E} =44 K, approximately twice as high as in the isostructural ‘Einstein solid’ VAl{sub 10.1}. - Graphical abstract: A low-energy Einstein mode is observed in a novel intermetallic cage compound ErV{sub 2}Al{sub 20} by specific heat and resistivity measurements. - Highlights: • Single crystals of a new compound ErV{sub 2}Al{sub 20} were grown by self-flux method. • Crystal structure is reported, based on powder x-ray diffraction. • ErV{sub 2}Al{sub 20} is a Curie-Weiss paramagnet. • Low-energy ‘rattling’ phonon mode (Θ{sub E}=44 K) is found in specific heat measurements.

36 MATERIALS SCIENCE↗

Method of manufacturing superconductor wire

A method for forming Nb.sub.3Sn superconducting wire is provided. The method employs a powder-in-tube process using a high-tin intermetallic compound, such as MnSn.sub.2, for producing the Nb.sub.3Sn. The use of a high-tin intermetallic compound enables the process to perform hot extrusion without melting the high-tin intermetallic compound. Alternatively, the method may entail drawing the wire without hot extrusion.

36 MATERIALS SCIENCE↗

Electrochemical behavior of Nd and its co-reduction with Bi in molten LiCl-KCl salts - 18360

A molten salt phase is used as the solvent in pyrochemical reprocessing. The molten salt waste generated in pyro-processes contains the residual lanthanides and actinides as various compounds. Various methods have been proposed for recovering and recycling these useful elements. The separation of actinides from lanthanides is performed by electrolysis or reductive extraction. Herein we have studied PyroRedSox-based co-reduction of Nd and Bi via electrolysis in a molten chloride salt. The redox behavior of Nd and the formation potential of intermetallic compounds of Nd and Bi were determined using cyclic voltammetry (CV). Electrorefining was performed under a constant reductive potential at 773 K in LiCl-KCl eutectic mixture; the co-reduction potential was -1.37 V. Lastly, the co-reduction potential of the intermetallic compound was applied to reduce the amount of Nd and Bi. Scanning electron microscopy (SEM) revealed that various kinds of intermetallic compounds were formed in Bi and Nd, and were deposed in the lower part of the molten salt, allowing purification of the contaminated molten salt. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

High-temperature studies of the magnetic susceptibility of samarium and the Al{sub 2}Sm compound

The magnetic susceptibility of metallic samarium and the Al{sub 2}Sm intermetallic compound has been experimentally studied by the Faraday method in the temperature range of 300-1800 K. It has been shown that the temperature dependences of the magnetic susceptibility of Sm and Al{sub 2}Sm in a crystalline state can be described in the framework of Van Vleck paramagnetism theory taking into account variable valence and the contribution from the conduction electrons. Using this theoretical interpretation of the data, the effective valence of samarium in the metallic state and in the Al{sub 2}Sm intermetallic compound has been estimated as a function of the temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal Calculations to Determine Maximum Zircaloy Temperatures During Reactor Operations for Campaign 1 Fuel Assemblies

The H-Canyon Facility plans on processing bundles from Non-Aluminum Spent Nuclear Fuel (NASNF) Risk Group 1 (UO 2 core fuels). Uranium-zirconium (UZr) alloys and zirconium clad UO 2 fuel containing UZr intermetallic compound have the potential to cause explosions during dissolution. UZr intermetallic typically only forms when uranium and zirconium (or zirconium alloy) cladding are in contact at high temperatures. Thermal modeling was performed to determine the maximum cladding temperature for Campaign 1 Zircoloy cladded fuel assembles during reactor operation to help determine if the UZr intermetallic compound could have formed during reactor operations. The temperature of 350°C was chosen as a conservative minimum value for the possible formation of intermetallic UZr compound. The modeling approach, inputs, and results are outlined in this document.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Microstructure and mechanical properties of diffusion bonded W/steel joint using V/Ni composite interlayer

Diffusion bonding between W and steel using V/Ni composite interlayer was carried out in vacuum at 1050 °C and 10 MPa for 1 h. The microstructural examination and mechanical property evaluation of the joints show that the bonding of W to steel was successful. No intermetallic compound was observed at the steel/Ni and V/W interfaces for the joints bonded. The electron probe microanalysis and X-ray diffraction analysis revealed that Ni{sub 3}V, Ni{sub 2}V, Ni{sub 2}V{sub 3} and NiV{sub 3} were formed at the Ni/V interface. The tensile strength of about 362 MPa was obtained for as-bonded W/steel joint and the failure occurred at W near the V/W interface. The nano-indentation test across the joining interfaces demonstrated the effect of solid solution strengthening and intermetallic compound formation in the diffusion zone. - Highlights: • Diffusion bonding of W to steel was realized using V/Ni composite interlayer. • The interfacial microstructure of the joint was clarified. • Several V–Ni intermetallic compounds were formed in the interface region. • The application of V/Ni composite interlayer improved the joining quality.

36 MATERIALS SCIENCE↗

Magnetic properties and transformation of crystal structure in the ErFe{sub 2}-ErAl{sub 2} system

The modification of structural properties and magnetic behaviour of the ErFe{sub 2−x}Al{sub x} Laves phase intermetallic compounds have been studied while changing the Al content in the range 0.36 ≤ x ≤ 1.5. Powder X-ray diffraction study at room temperature showed the formation of the cubic C15 structure, in the samples with Al content of 0.36 ≤ x < 0.75 and 1.4 ≤ x ≤ 2.0. For the intermediate compositions with 0.75 ≤ x ≤ 1.4, the hexagonal C14 structure is observed. Magnetic and magnetocaloric properties of polycrystalline ErFe{sub 2−x}Al{sub x} intermetallic compounds were investigated experimentally using magnetic and heat capacity measurements. The Curie temperature T{sub C} decreases from 275 to 28 K as the Al content increases from x = 0.36 to x = 1.5, respectively. Magnetization measurements in strong magnetic fields showed the complex mechanism of magnetic saturation in the studied compounds. Under an external field change from 0 to 2 T, the maximum entropy change is 6 J/kg K at T = 28 K for the composition with x = 1.5. The minimum in the concentration dependence of the magnetic entropy change is observed in the vicinity of x equal to 1.25. Regularities of variations of magnetocaloric properties of ErFe{sub 2−x}Al{sub x} intermetallic compounds with increasing Al content are discussed from the point of view of their both structural and magnetic states.

36 MATERIALS SCIENCE↗