SEARCH · Search NASA

Results for “ISOS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Influence of Intraseasonal Variability on the Development of Monsoon Depressions

Previous studies showed that the activity of monsoon low-pressure systems (LPS), which produce a large fraction of the South Asian monsoon's total rainfall, is modulated by intraseasonal variability. Using satellite-derived products and atmospheric reanalyzes, this study examines how the boreal summer intraseasonal oscillation (ISO) separately modulates the occurrence of weaker LPS (lows) and stronger LPS (depressions). It is found that the genesis of lows is insensitive to ISO phase, while depressions exhibit a strong preference for genesis during the phase that is convectively active over the northern Indian Ocean. Essentially, development of LPS into depressions depends upon the timing of genesis of the initial disturbance. Evidence is presented supporting the hypothesis that the development of lows into depressions is fostered by large-scale atmospheric conditions governed by the ISO. Furthermore, results also suggest that while lows have no preference for forming over ocean compared to land, depressions mostly form over ocean.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2019

Solvent-dependent complex reaction pathways of bromoform revealed by time-resolved X-ray solution scattering and X-ray transient absorption spectroscopy

The photochemical reaction pathways of CHBr3 in solution were unveiled using two complementary X-ray techniques, time-resolved X-ray solution scattering (TRXSS) and X-ray transient absorption spectroscopy, in a wide temporal range from 100 ps to tens of microseconds. By performing comparative measurements in protic (methanol) and aprotic (methylcyclohexane) solvents, we found that the reaction pathways depend significantly on the solvent properties. In methanol, the major photoproducts are CH3OCHBr2 and HBr generated by rapid solvolysis of iso-CHBr2-Br, an isomer of CHBr3. In contrast, in methylcyclohexane, iso-CHBr2-Br returns to CHBr3 without solvolysis. In both solvents, the formation of CHBr2 and Br is a competing reaction channel. From the structural analysis of TRXSS data, we determined the structures of key intermediate species, CH3OCHBr2 and iso-CHBr2-Br in methanol and methylcyclohexane, respectively, which are consistent with the structures from density functional theory calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Pseudodesulfovibrio mercurii sp. nov., a mercury-methylating bacterium isolated from sediment

The sulfate-reducing, mercury-methylating strain ND132 T was isolated from the brackish anaerobic bottom sediments of Chesapeake Bay, USA. Capable of high levels of mercury (Hg) methylation, ND132 T has been widely used as a model strain to study the process and to determine the genetic basis of Hg methylation. Originally called Desulfovibrio desulfuricans ND132 T on the basis of an early partial 16S rRNA sequence, the strain has never been formally described. Phylogenetic and physiological traits place this strain within the genus Pseudodesulfovibrio, in the recently reclassified phylum Desulfobacterota (formerly Deltaproteobacteria ). ND132 T is most closely related to Pseudodesulfovibrio hydrargyri BerOc1 T and Pseudodesulfovibrio indicus J2T. Analysis of average nucleotide identity (ANI) of whole-genome sequences showed roughly 88 % ANI between P. hydrargyri BerOc1T and ND132T, and 84 % similarity between ND132T and P. indicus J2 T . These cut-off scores <95 %, along with a multi-gene phylogenetic analysis of members of the family Desulfovibrionacea, and differences in physiology indicate that all three strains represent separate species. The Gram-stain-negative cells are vibrio-shaped, motile and not sporulated. ND132 T is a salt-tolerant mesophile with optimal growth in the laboratory at 32 °C, 2 % salinity, and pH 7.8. The DNA G+C content of the genomic DNA is 65.2 %. It is an incomplete oxidizer of short chain fatty acids, using lactate, pyruvate and fumarate with sulfate or sulfite as the terminal electron acceptors. ND132 T can respire fumarate using pyruvate as an electron donor. The major fatty acids are iso-C 15 :0 , anteiso-C 15 : 0 , iso-C 17 : 0 , iso-C 17 : 1 ω9c and anteiso-C 17 : 0 . We propose the classification of strain ND132 T (DSM 110689, ATCC TSD-224) as the type strain Pseudodesulfovibrio mercurii sp. nov.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2022

Prehydrodynamic evolution and its impact on quark-gluon plasma signatures

State-of-the-art hydrodynamic models of heavy-ion collisions have considerable theoretical model uncertainties in the description of the very early prehydrodynamic stage. Here we add a new computational module, K T Iso, that describes the prehydrodynamic evolution kinetically, based on the relativistic Boltzmann equation with collisions treated in the isotropization time approximation. As a novelty, K T Iso allows for the inclusion and evolution of initial-state momentum anisotropies. To maintain computational efficiency K T Iso assumes strict longitudinal boost invariance and allows collisions to isotropize only the transverse momenta. We use it to explore the sensitivity of hadronic observables measured in relativistic heavy-ion collisions to initial-state momentum anisotropies and microscopic scattering during the prehydrodynamic stage.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2020

Static and dynamic properties of multi-ionic plasma mixtures

Complex plasma mixtures with three or more components are often encountered in astrophysics or in inertial confinement fusion (ICF) experiments. For mixtures containing species with large differences in atomic number Z, the modeling needs to consider at the same time the kinetic theory for low-Z elements combined with the theory of strongly coupled plasma for high-Z elements, as well as all the intermediate situations that can appear in multi-component systems. For such cases, we study the pair distribution functions, self-diffusions, mutual diffusion and viscosity for ternary mixtures at extreme conditions. These quantities can be produced from first principles using orbital free molecular dynamics at the computational expense of very intensive simulations to reach good statistics. Utilizing the first-principles results as reference data, we assess the merit of a global analytic model for transport coefficients, "Pseudo-Ions in Jellium" (PIJ), based on an iso-electronic assumption (iso-n e ). With a multi-component hypernetted-chain integral equation, we verify the quality of the iso-n e prescription for describing the static structure of the mixtures. This semi-analytical modeling compares well with the simulation results and allows one to consider plasma mixtures not accessible to simulations. Further, applications are given for the mix of materials in ICF experiments. A reduction of a multicomponent mixture to an effective binary mixture is also established in the hydrodynamic limit and compared with PIJ estimations for ICF relevant mixtures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Land-Based Wind Market Report: 2021 Edition

The U.S. Department of Energy's 2021 edition of its land-based wind market report provides an overview of key trends in the U.S. wind power market, with a focus on 2020. You can find a report, data file and presentation on the Files tab, below. Additionally, several data visualizations are available on the Visualizations tab. Highlights of this year’s update include: -Wind comprises a growing share of electricity supply: U.S. wind power capacity grew at a record pace in 2020, with 25 billion dollars invested in 16.8 GW of capacity. Wind energy output rose to account for more than 8% of the entire nation’s electricity supply, and is more than 20% in 10 states. At least 209 GW of wind are seeking transmission interconnection; 61 GW of this capacity are offshore wind and 13 GW are hybrid plants that pair wind with storage or PV. -Wind project performance has increased over time: The average capacity factor among recently built projects was over 40%, considerably higher than projects built earlier. The highest capacity factors are seen in the interior ‘wind belt’ of the country. -Turbines continue to get larger: Improved plant performance has been driven by larger turbines mounted on taller towers and featuring longer blades. In 2010, no turbines employed blades that were 115 meters in diameter or larger, but in 2020, 91% of newly installed turbines featured such rotors. Proposed projects indicate that total turbine height will continue to rise. -Low wind turbine pricing has pushed down installed project costs over the last decade: Wind turbine prices are averaging 775–850 dollars/kW. The average installed cost of wind projects in 2020 was 1,460 dollars/kW, down more than 40% since the peak in 2010, though stable for the last three years. The lowest costs were found in Texas and the (non-ISO) West. -Wind energy prices remain low, around 20 dollars/MWh in the interior of the country: After topping out at 70 dollars/MWh for power purchase agreements (PPAs) executed in 2009, the national average price of wind PPAs has dropped. In the interior ‘wind belt’ of the country, recent pricing is around 20 dollars/MWh. In the West and East, prices tend to average 30 dollars/MWh or more. These prices, which are possible in part due to federal tax support, fall below the projected future fuel costs of gas-fired generation. -Wind PPA prices are often attractive compared to wind’s grid-system market value: The value of wind in wholesale power markets is affected by the location of wind plants, their hourly output profiles, and how those characteristics correlate with real-time electricity prices and capacity markets. The market value of wind declined in 2020, following natural gas prices lower and averaging under 15 dolalrs/MWh in ERCOT, MISO, NYISO and SPP; higher values were seen in CAISO, ISO-NE and PJM. -The average levelized cost of wind energy is down to 33 dollars/MWh: Levelized costs, which exclude the impacts of federal tax incentives, vary across time and geography, but the national average stood at 33 dollars/MWh in 2020—down substantially historically, though consistent with the previous two years. Levelized costs were lowest in ERCOT, SPP, and the (non-ISO) West. -The health and climate benefits of wind in 2020 were larger than its grid-system value, and the combination of all three far exceeds the current levelized cost of wind: Wind generation reduces power-sector emissions of carbon dioxide, nitrogen oxides, and sulfur dioxide. These reductions, in turn, provide public health and climate benefits that vary regionally, but together are economically valued at an average of 76 dollars/MWh-wind nationwide in 2020. -The domestic supply chain for wind equipment is diverse: For wind projects recently installed in the U.S., domestically manufactured content is highest for nacelle assembly (>85%), towers (60-75%), and blades and hubs (30-50%), but is much lower for most components internal to the nacelle.

17 WIND ENERGY↗

DOE OSTI2022

Coordinated Ramping Product and Regulation Reserve Procurements in CAISO and MISO using Multi-Scale Probabilistic Solar Power Forecasts (Pro2R)

How can probabilistic solar forecasts lower costs and improve reliability for independent system operator (ISO) markets? We tackle this question in three steps. First, we enhance an existing solar forecasting system to provide well-calibrated hours-ahead probabilistic forecasts. We then relate the degree of uncertainty in those forecasts to error distributions for net load ramps for the California ISO (CAISO) using statistical and machine learning methods. Projected net load errors conditioned on solar uncertainty are translated into flexible ramp requirements that therefore reflect real-time meteorological and solar conditions, improving on typical ISO procedures. Finally, a multi-period look-ahead production cost model quantifies how conditional ramp requirements can a) decrease operating costs by lowering requirements compared to often conservative unconditional methods, and b) reduce generation scarcity events and consequently improve reliability by increasing flexibility requirements at times when unconditional forecast-based requirements understate actual ramp uncertainty. In addition to the products just described (quantification of solar uncertainty, its translation into requirements for ramp capability product, and quantification of the benefits of more accurate ramp requirements), this project also developed a visualization system that alerts system operators of ramp and uncertainty conditions within the network based on solar forecasts. The system is called Resource Forecast and Ramp Visualization for Situational Awareness (RaVIS). These four products represent significant advances in the state-of-the-art of probabilistic solar forecasting, development of weather-informed reserve requirements, production costing methods for estimating the benefits of more accurate reserve requirements, and visualization of system status, respectively. Yet the products are also practical and can be immediately implemented, potentially enabling system operators to save millions of dollars in ramp product procurement costs per year.

14 SOLAR ENERGY↗

DOE OSTI2022

Land-Based Wind Market Report: 2022 Edition

The U.S. Department of Energy's 2022 edition of its Land-Based Wind Market Report provides an overview of key trends in the U.S. wind power market, with a focus on 2021. You can find a report, data file and presentation on the Files tab, below. Additionally, several data visualizations are available on the Visualizations tab. Despite ongoing supply chain challenges, wind energy in 2021 continued to see strong growth, technology improvements, and low prices in the U.S. Key highlights include: Wind comprises a growing share of electricity supply: U.S. wind power capacity grew at a strong pace in 2021, with the 13.4 GW of new additions representing a $\$20$ billion investment and 32% of all newly added U.S. generation capacity. Wind energy output rose to account for more than 9% of the entire nation’s electricity supply. At least 247 GW of wind are seeking transmission interconnection; 77 GW of this capacity are offshore wind and 19 GW are hybrid plants that pair wind with storage or solar PV. Wind project performance has increased over the decades: The average capacity factor among recently built projects was nearly 40%, considerably higher than projects built earlier. The highest capacity factors are seen in the interior ‘wind belt’ of the country. Turbines continue to get larger: Improved plant performance has been driven by larger turbines mounted on taller towers and featuring longer blades. In 2011, no turbines employed blades that were 115 meters in diameter or larger, but in 2021, 89% of newly installed turbines featured such rotors. Proposed projects indicate that total turbine height will continue to rise. Low wind turbine pricing has pushed down installed project costs over the last decade: Wind turbine prices averaged $\$800$–$\$950$/kW in 2021, a 5% to 10% increase from the year prior but substantially lower than in 2010. The average installed cost of wind projects in 2021 was $\$1,500$/kW, down more than 40% since the peak in 2010, though relatively stable in recent years. The lowest costs were found in Texas and the (non-ISO) West. Wind energy prices are on the rise, but generally remain low, around $\$20$/MWh in the interior of the country with higher prices in the West and East. After topping out above $\$75$/MWh for power purchase agreements (PPAs) executed in 2009, the national average price of wind PPAs has dropped—though supply-chain pressures have resulted in increased prices in recent years. In the interior ‘wind belt’ of the country, recent pricing is around $\$20$/MWh. In the West and East, prices tend to average above $\$30$/MWh. These prices, which are possible in part due to federal tax support, fall below the projected future fuel costs of gas-fired generation. Wind PPA prices are often attractive compared to wind’s grid-system market value: The value of wind in wholesale power markets is affected by the location of wind plants, their hourly output profiles, and how those characteristics correlate with real-time electricity prices and capacity markets. The market value of wind increased in 2021, averaging $\$16$/MWh in MISO, $\$19$/MWh in SPP, $\$23$/MWh in NYISO, $\$31$/MWh in ERCOT, $\$33$/MWh in PJM, $\$44$/MWh in ISO-NE, and $\$48$/MWh in CAISO. The average levelized cost of wind energy was $\$32$/MWh for plants built in 2021: Levelized costs, which exclude the impacts of federal tax incentives, vary across time and geography. The national average stood at $\$32$/MWh in 2021—down substantially historically, though relatively stable in recent years. Levelized costs were lowest in ERCOT, SPP, and the (non-ISO) West. The health and climate benefits of wind in 2021 were larger than its grid-system value, and the combination of all three far exceeds the current levelized cost of wind: Wind generation reduces power-sector emissions of carbon dioxide, nitrogen oxides, and sulfur dioxide. These reductions, in turn, provide public health and climate benefits that vary regionally, but together are economically valued at an average of over $\$90$/MWh-wind for plants built in 2021.

17 WIND ENERGY↗

DOE OSTI2021

Pro2R: Procurement of Ramping Product and Regulation in CAISO Using Probabilistic Solar Power Forecasts

This presentation summarizes the objectives and findings from the project titled, "Pro2R: Coordinated Procurement of Ramping Product & Regulation in CAISO Using Probabilistic Solar Power Forecasts," funded by DOE SETO. The goal is to develop cutting edge probabilistic solar power forecasting methods, and integrate them into ISO market operations. The team has integrated in two ways: 1) to procure ramping product and regulation requirements (ancillary services) in the California ISO market, and 2) to develop an open source visitation and ramp alert related situational awareness using probabilistic forecasts. This deck also summarizes the results from the use of machine learning methods to relate probabilistic solar forecasts to the the needs for flexible ramp product in the California ISO system.

41 EE - Solar Energy Technologies Office (EE-4S)↗

DOE OSTI2023

A Revised International Standard for Gearboxes in Wind Turbine Systems

Gearbox and wind turbine design and application standards have contributed significantly to improvements in reliability over the past two decades. The International Electrotechnical Commission (IEC) 61400-4 standard of wind turbine gearbox design is currently being revised by a joint working group (JWG) of experts in IEC TC 88 (wind energy) and International Organization for Standardization (ISO) TC60 (gears) to further that effort. Experts from ISO TC4 (rolling bearings) and ISO TC28 (lubricants) have actively participated. This revision has implemented lessons learned from industry use of edition 1 since its publication in 2012. The main document, IEC 61400-4, was pared down to essential design requirements and application-specific recommendations along with a design verification framework. The JWG leveraged concurrent development of other standards, such as IEC 61400-8 on wind turbine structures, to replace edition 1 content. These are described along with how this works with the IEC Renewable Energy certification scheme for wind turbines (IECRE-WE). The JWG recognized the interest in maintaining informative parts of edition 1 including annexes on wind turbine architecture and loads, bearing and gear arrangements, bearing selection, lubrication system descriptions and lubricant performance recommendations. This information was retained in two technical reports: IEC/TR 61400-4-2 Lubrication and IEC/TR 61400-4-3 Explanatory Notes. Additionally, a technical specification, IEC/TS 61400-4-1, was drafted to provide a reliability calculation method for comparing different design options or conditions. Salient elements of these documents are described. All four documents were recently distributed for IEC/ISO review, ballot, and comment. Publication is expected in 2023.

gearbox↗

DOE OSTI2023

A Revised International Standard for Gearboxes in Wind Turbine Systems: Preprint

ENGINEERING,WIND ENERGY↗

DOE OSTI2026

The Linear Point Standard Ruler with DESI DR1 and DR2 Data

The linear point, a purely geometric feature in the monopole of the two-point correlation function, has been proposed as an alternative standard ruler. Compared to the peak in the correlation function, it is more robust to late-time nonlinear effects at the percent level. In light of improved simulations and high quality data, we revisit the robustness of the linear point and use it as an alternative to template-based fitting approaches typically used in BAO analyses. We present the linear point measurements on galaxy samples from the first and second data releases (DR1 and DR2) of the DESI survey. We convert the linear point into a dimensionless parameter $α_{iso,LP}$, defined as the ratio of the linear point in the fiducial cosmology and the observed value, analogous to the isotropic BAO scaling parameter $α_{iso}$ used in previous BAO measurements. Using the 2nd generation of AbacusSummit mock catalogs, we find that linear point measurements are more precise when calculated in the post-reconstruction regime with 15-60% smaller uncertainties than those pre-reconstruction. We find a systematic shift in the linear point measurements compared against the isotropic BAO measurements in mocks; we attribute this to the isotropic damping parameter responsible for smearing the linear point in the nonlinear regime. We propose a sample-dependent correction that mitigates the impact of late-time nonlinear effects. While this introduces a cosmology dependence in an otherwise model-independent measurement, this is necessary given the sub-percent precision dictated by current cosmological surveys. Comparing $α_{iso,LP}$ with isotropic BAO measurements made on the DESI DR1 and DR2 galaxy samples, we find excellent agreement after applying this correction, particularly post-reconstruction. We discuss future scope regarding cosmological inference with linear point measurements.

Uberoi, N. [Yale U.] (ORCID:0000000275179629)↗

DOE OSTI2024

Best Practices for Measuring the Modulation Transfer Function of Video Endoscopes

Endoscopes are crucial for assisting in surgery and disease diagnosis, including the early detection of cancer. The effective use of endoscopes relies on their optical performance, which can be characterized with a series of metrics such as resolution, vital for revealing anatomical details. The modulation transfer function (MTF) is a key metric for evaluating endoscope resolution. However, the 2020 version of the ISO 8600-5 standard, while introducing an endoscope MTF measurement method, lacks empirical validation and excludes opto-electronic video endoscopes, the largest family of endoscopes. Measuring the MTF of video endoscopes requires tailored standards that address their unique characteristics. This paper aims to expand the scope of ISO 8600-5:2020 to include video endoscopes, by optimizing the MTF test method and addressing parameters affecting measurement accuracy. We studied the effects of intensity and uniformity of image luminance, chart modulation compensation, linearity of image digital values, auto gain control, image enhancement, image compression and the region of interest dimensions on images of slanted-edge test charts, and thus the MTF based on these images. By analyzing these effects, we provided recommendations for setting and controlling these factors to obtain accurate MTF curves. Our goal is to enhance the standard’s relevance and effectiveness for measuring the MTF of a broader range of endoscopic devices, with potential applications in the MTF measurement of other digital imaging devices.

47 OTHER INSTRUMENTATION↗

DOE OSTI2021

An Integrated Paradigm for the Management of Delivery Risk in Electricity Markets: From Batteries to Insurance and Beyond [Slides]

In wholesale electricity markets today, flexibility from a limited number of distributed energy resources (DERs) is offered daily, and the value of flexibility is not yet recognized for economic hedging of delivery risk. Under a three-year project funded by the ARPA-E PERFORM program, a collaborative team is working towards developing an integrated risk management framework that will leverage flexibility from distributed and bulk resources to cost-effectively and reliably manage delivery risk of intermittent resources. Two concepts are at the core of the proposed integrated risk management framework: (A) flexibility options, which are a novel type of options and enable wholesale electricity market participants to hedge uncertainty by buying flexibility. (B) DER flexibility scores, which provide a way for utilities or aggregators to classify assets in groups with different likelihood of delivering contracted flexibility. This report presentation will focus on the proposed ISO-product "flexibility options," which is complementary to ramp and other products being introduced by ISOs/RTOs to manage net load uncertainties. Participating resources with imbalance risk can buy flexibility options to hedge their production, whereas grid-connected resources that can provide physical flexibility can offer flexibility options. We will present basics of the formulation for a day-ahead ISO market that matches buyers and sellers of this hedge in coordination with existing capabilities to schedule energy and ancillary services, and outline how their settlements mitigate the impact of imbalance risk.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2025

ANS-8 Subcommittee Forum [Slides]

This presentation goes over membership of ANS-8 subcommittee (SC) and WGs. Additionally discussed is ANS-8 SC and NCSCC ballots for ANS-8 standards since the last meeting, ANS-8 business, ISO TC85/SC5/WG8 September Meeting – quick summary. Working Group Chair Reports, ISO TC85/SC5/WG8 “Nuclear Criticality Safety” committee, and How to volunteer/participate.

ANS-8 Standards↗

DOE OSTI2023

Organo‐Functionalized Lacunary Double Cubane‐Type Oxometallates: Synthesis, Structure, and Properties of [(M II Cl) 2 (V IV O) 2 {((HOCH 2 CH 2 )(H)N(CH 2 CH 2 O))(HN(CH 2 CH 2 O) 2 )} 2 ] (M=Co, Zn)

Abstract Organofunctionalized tetranuclear clusters [(M II Cl) 2 (V IV O) 2 {((HOCH 2 CH 2 )(H)N(CH 2 CH 2 O))(HN(CH 2 CH 2 O) 2 )} 2 ] (1, M=Co,2: M=Zn) containing an unprecedented oxometallacyclic {M 2 V 2 Cl 2 N 4 O 8 } (M=Co, Zn) framework have been prepared by solvothermal reactions. The new oxo‐alkoxide compounds were fully characterized by spectroscopic methods, magnetic susceptibility measurement, DFT and ab initio computational methods, and complete single‐crystal X‐ray diffraction structure analysis. The isostructural clusters are formed of edge‐sharing octahedral {VO 5 N} and trigonal bipyramidal {MO 3 NCl} units. Diethanolamine ligates the bimetallic lacunary double cubane core of1and2in an unusual two‐mode fashion, unobserved previously. In the crystalline state, the clusters of1and2are joined by hydrogen bonds to form a three‐dimensional network structure. Magnetic susceptibility data indicate weakly antiferromagnetic interactions between the vanadium centers [J iso (V IV −V IV )=−5.4(1); −3.9(2) cm −1 ], and inequivalent antiferromagnetic interactions between the cobalt and vanadium centers [J iso (V IV −Co II )=−12.6 and −7.5 cm −1 ] contained in1.

Chemistry↗

DOE OSTI2021

Low-order preconditioning of the Stokes equations

A well-known strategy for building effective preconditioners for higher-order discretizations of some PDEs, such as Poisson's equation, is to leverage effective preconditioners for their low-order analogs. In this work, we show that high-quality preconditioners can also be derived for the Taylor–Hood discretization of the Stokes equations in much the same manner. In particular, we investigate the use of geometric multigrid based on the Q 1 iso Q 2 /Q 1 discretization of the Stokes operator as a preconditioner for the Q 2 /Q 1 discretization of the Stokes system. We utilize local Fourier analysis to optimize the damping parameters for Vanka and Braess–Sarazin relaxation schemes and to achieve robust convergence. Furthermore, these results are then verified and compared against the measured multigrid performance. While geometric multigrid can be applied directly to the Q 2 /Q 1 system, our ultimate motivation is to apply algebraic multigrid within solvers for Q 2 /Q 1 systems via the Q 1 iso Q 2 /Q 1 discretization, which will be considered in a companion paper.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2021

Evaluating dynamic thermal performance of building envelope components using small-scale calibrated hot box tests

The hot box test method has been applied to evaluate both the steady-state (U-value) and dynamic thermal properties of building envelopes. However, the high construction cost of full-scale hot box apparatus and the testing time required (usually several days) may prevent its wider adoption. To overcome the limitations of full-scale hot box tests, here we propose a novel method to evaluate the dynamic thermal performance of building envelope components using a small-scale calibrated hot box and scaled-down specimen. In this paper, the scaling relationships of thermal properties evaluated using a full-size specimen and a scaled-down specimen are established based on the Laplace transform of the heat transfer equations. In addition, dynamic thermal properties obtained from scaled-down experimental tests are compared to the values calculated by the EN ISO13768 (ISO) method. A small-scale hot box with a 355 mm × 355 mm metering area was constructed and calibrated to validate the correlations. Three scaled-down concrete sandwich wall panels were then tested and the scaling relationship was cross-validated using the experimental results, finite difference (FD) simulations, and the ISO method. The results indicate that the dynamic thermal properties obtained from a scaled-down hot box test can be correlated to its full-size counterpart when certain conditions are met. The scaled-down hot box test is demonstrated to be an effective yet economical alternative to a full-scale test with significantly reduced experimentation cost and turn-around time.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗