Search NASA⌕ Search

SEARCH · Search NASA

Results for “ISOTOPE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

Oxygen Isotope Measurements of a Rare Murchison Type A CAI and Its Rim

Ca-, Al-rich inclusions (CAIs) from CV chondrites commonly show oxygen isotope heterogeneity among different mineral phases within individual inclusions reflecting the complex history of CAIs in both the solar nebula and/or parent bodies. The degree of isotopic exchange is typically mineral-specific, yielding O-16-rich spinel, hibonite and pyroxene and O-16-depleted melilite and anorthite. Recent work demonstrated large and systematic variations in oxygen isotope composition within the margin and Wark-Lovering rim of an Allende Type A CAI. These variations suggest that some CV CAIs formed from several oxygen reservoirs and may reflect transport between distinct regions of the solar nebula or varying gas composition near the proto-Sun. Oxygen isotope compositions of CAIs from other, less-altered chondrites show less intra-CAI variability and 16O-rich compositions. The record of intra-CAI oxygen isotope variability in CM chondrites, which commonly show evidence for low-temperature aqueous alteration, is less clear, in part because the most common CAIs found in CM chondrites are mineralogically simple (hibonite +/- spinel or spinel +/- pyroxene) and are composed of minerals less susceptible to O-isotopic exchange. No measurements of the oxygen isotope compositions of rims on CAIs in CM chondrites have been reported. Here, we present oxygen isotope data from a rare, Type A CAI from the Murchison meteorite, MUM-1. The data were collected from melilite, hibonite, perovskite and spinel in a traverse into the interior of the CAI and from pyroxene, melilite, anorthite, and spinel in the Wark-Lovering rim. Our objectives were to (1) document any evidence for intra-CAI oxygen isotope variability; (2) determine the isotopic composition of the rim minerals and compare their composition(s) to the CAI interior; and (3) compare the MUM-1 data to oxygen isotope zoning profiles measured from CAIs in other chondrites.

Matzel, J. E. P.↗
NASA NTRS2015

Sulfur and Oxygen Isotopic Analysis of a Cosmic Symplectite from a Comet Wild 2 Stardust Terminal Particle

Introduction: Analyses of comet 81P/Wild 2 samples re-turned from the Stardust mission have uncovered surprising simi-larities to meteoritic material, including the identification of inner solar system grains [1-3]. The TEM characterization of terminal particle (TP) 4 from Stardust track #147 revealed an assemblage consisting of symplectically intergrown pentlandite and nanocrys-talline maghemite coexisting with high-Ca pyroxene [4]. Mineral-ogically similar cosmic symplectites (COS) containing pentlandite and magnetite in the primitive Acfer 094 meteorite are highly de-pleted in 16O (17O, 18O ~ 180 per mille) [5-7]. This isotopic signature is proposed to record alteration with primordial solar nebula water. Conversely, the normal O isotopic composition of the Stardust COS indicates alteration by a different aqueous reservoir, perhaps on the comet [8]. In this study, we analyzed the Wild 2 COS for S isotopes to further constrain its origin. Experimental: Thin sections of TP4 (12 m) were produced and their mineralogy was thoroughly characterized by TEM. Two of the sections were analyzed for O isotopes by isotopic imaging in the JSC NanoSIMS 50L. The sample in one of the slices was completely consumed. The remaining material in the adjacent slice was analyzed simultaneously for 16O, 32S, 33S, 34S, and 56Fe16O in electron multipliers using a Cs+ primary ion beam. Quasi-simulta-neous arrival (QSA) can have a significant effect on S isotopic ra-tios when using electron multipliers, resulting in undercounting of 32S [9]. Canyon Diablo troilite (CDT) was measured numerous times to deduce a correction factor for QSA and ensure measure-ment reproducibility. Isotopic ratios are reported relative to CDT. Results and Discussion: The Wild 2 COS is enriched in the heavy S isotopes relative to CDT (33S = 6.5 +/- 1.6 per mille; 34S = 5.1 +/- 0.7 per mille; 1). The degree of 33S enrichment indicates mass-inde-pendent fractionation (MIF) with 33S = 3.9 +/- 1.7 per mille. MIF of S has been observed in some chondrules (33S up to 0.11per mille) [10], but this effect has not been identified in sulfides from carbonaceous chondrites [11] or IDPs [12]. S isotopic analysis of Stardust impact craters also did not reveal MIF or anomalies, save for one potential 32S-rich presolar sulfide [13]. Measurement errors on these impact craters were much larger than those in this study, however. MIF of S has been proposed to result from heterogeneities in the solar neb-ula from nucleosynthetic components [14] or photochemical irra-diation of solar nebula gas [10]. Presolar SiC grains are observed to have 32S enrichments [15, 16] contrary to the S isotopic compo-sition of the cometary COS. The S isotopic composition more likely reflects irradiation of nebular gas.

Nguyen, A. N.↗
NASA NTRS2019

The Effects of High-Temperature Fractional Crystallization on Calcium Isotopic Composition

We report Ca isotope fractionation among a co-genetic suite of samples from the Mauritanian Guelb el Azib ultramafic-mafic-anorthosite complex (GAC), which represents the fractional crystallization sequence of an igneous magma chamber. We investigate how the composition of an evolving crystallizing liquid and the resultant mineralogy of co-crystallizing assemblages affects inter-phase Ca isotope fractionation. Because the GAC is an Archean metamorphosed complex, we first investigate the resistance of the Ca isotope signature to secondary hydrothermal alteration and to metamorphism. While we cannot conclude here that Ca isotopes are undisturbed at the mineral scale, we show that they are preserved at the bulk rock scale. This is adequate for our study where several samples are almost monomineralic at the bulk scale level. The δ(exp 44/40)Ca (relative to NIST standard SRM 915a) of GAC layers range from −1.53 to 1.61‰, with the earliest-formed ultramafic cumulate layer being isotopically heaviest and the later, more felsic layers being isotopically lighter. For the first time, we show that plagioclase is much more enriched in light Ca isotopes compared to olivine and (Ca-) pyroxene. Monte Carlo simulations suggest that Ca isotopes are fractionated among co-existing silicate minerals during fractional crystallization, possibly in relation with the residual liquid composition. In qualitative agreement with computational models based on first principles lattice dynamics, we observe that Ca isotope fractionation is mineralogically controlled and importantly, that the degree of fractionation can vary according to the CaO composition of the residual liquid. While previous studies have aimed to understand partial melting as a source of Ca isotope fractionation, our results suggest that fractional crystallization is also a source of Ca isotope variability among co-genetic samples.

Maria C. Valdes↗
NASA NTRS2024

The Potassium Isotope Composition of Aggregate Material From Asteroid Bennu

NASA’s OSIRIS-REx mission re-turned material from asteroid Bennu on September 24, 2023, marking the first time a U.S. mission has delivered asteroid samples to Earth, and the largest asteroid sample return to date. Due to the pristine nature of these primitive carbonaceous-rich samples, they allow us a rare opportunity to study our solar system’s formation to a degree not previously possible. Isotopes of moderately volatile elements (MVEs) have been recently developed as robust tracers for tracking different volatilization events within our Solar System. Of the MVEs, K has gained significant interest in recent years due to its ideal chemical and physical properties combined with technique improvements. Due to this, several recent studies have investigated the K isotope systematics within bulk chondrites and found an isotopic dichotomy be-tween the carbonaceous and non-carbonaceous chondrites (Figure 1), likely reflecting their different reservoirs which formed in the inner and outer protoplanetary disk respectively. Furthermore, systematic K isotope variations across the different carbonaceous chondrite groups and correlations with mass independent isotope systems such as Cr, Ti, and Ni, have also been observed. As a result, establishing the K isotope composition of bulk Bennu can be used to test the mission hypothesis that “Bennu’s parent asteroid accreted in the outer protoplanetary disk, beyond Jupiter, as recorded by distinct isotopic anomalies in a variety of elements” . In addition to early solar system processes, K isotopes can also be fractionated by space weathering as shown by comparisons between mature and immature lunar regolith. The degree of K isotope fractionation caused by space weathering correlates with the regolith maturity index and is an order of magnitude larger than what is observed in bulk meteorite samples which have not undergone strong space weathering processes. As such, the K isotope systematics of Bennu samples could provide an independent assessment of regolith maturity of the asteroid surface, helping to directly test the mission hypothesis that “Space weathering changed the chemistry and mineralogy of optically active surfaces” . In order to test both this hypothesis, and the hypothesis relating to Bennu’s accretion location, we aim to conduct high-precision K isotope analysis on bulk Bennu aggregates.

K Wang↗
DOE OSTI2022

Examining the effects of chemical cleaning, leaching, and partial dissolution on zinc and cadmium isotope fractionation in marine carbonates

The application of zinc (Zn) and cadmium (Cd) isotopes as palaeo-proxies in carbonate sediment is rapidly expanding due to their potential for tracing changes in biological productivity in the modern and past oceans. However, there are limited investigations into the chemical cleaning methods required to produce the most consistent and accurate data for these novel isotope systems. This could impact their use as palaeo-proxies to reconstruct ocean-atmosphere-climate interactions throughout Earth's history. To address this concern and expand the utility of the Zn and Cd stable isotope systems as palaeo-productivity tracers, the performance of two standard chemical cleaning protocols for acquiring robust and reliable Zn and Cd isotope datasets were assessed. These include (i) the Cd-cleaning method that uses a reductive step to selectively leach contaminating secondary iron (Fe)-manganese (Mn) (oxyhydr)oxide coatings from the carbonate surface, and an oxidative step that is used to remove post-depositional organic matter and sulphide precipitates; and (ii) the magnesium/calcium cleaning protocol that includes an oxidative step only, leaving secondary Fesingle bondMn (oxyhydr)oxide coatings largely intact. Well-preserved Holocene-, and Mesozoic-aged carbonate sediments were used to test the reliability of these two chemical cleaning methods. The Holocene samples comprised not only aliquots of bulk sediment, but also individual species of planktic and benthic foraminifera. Our results show that the best practice chemical cleaning method for retrieving consistent and accurate Zn and Cd isotope, and Zn/Ca and Cd/Ca datasets for carbonate sediments, requires both reductive and oxidative cleaning following the Cd-cleaning method. This differs from most methodological approaches applied to date that remove the reductive step from the chemical cleaning protocol and apply an oxidative step only, or no chemical cleaning at all. Inclusion of the reductive step in the chemical cleaning method typically shifts δ 66 Zn by ~0.1‰ lower and δ 114 Cd by 0.3‰ higher in the solid phase, while Zn/Ca and Cd/Ca typically decrease 2-fold. The benthic foraminifera, C. wuellerstorfi, that live in ocean bottom waters where the seawater Zn and Cd isotope composition is homogeneous display evidence of Zn and Cd isotope fractionation between seawater and carbonate on the order of 0.08 ± 0.08‰ (2SE, n = 4) and -0.25 ± 0.13‰ (2SE, n = 4), respectively, in agreement with experimental constraints. Furthermore, evidence of Zn isotope fractionation effects are recorded in a naturally-dissolved carbonate sediment, together with laboratory-controlled carbonate dissolution experiments. Based on these results, we recommend the Cd-cleaning method and the application of Zn and Cd isotope fractionation factors to accurately reconstruct past seawater Zn and Cd isotope compositions from carbonate sediments.

58 GEOSCIENCES↗
DOE OSTI2021

The gallium isotopic composition of the Moon

Here, in this study, we present new Ga isotope data from a suite of 28 mare basalts and lunar highland rocks. The δ 71 Ga values of these samples range from -0.10 to +0.66‰ (where δ 71 Ga is the relative difference between the 71 Ga/ 69 Ga ratio of a sample and the Ga-IPGP standard), which is an order of magnitude more heterogeneous than δ 71 Ga values in terrestrial magmatic rocks. The cause of this isotopic heterogeneity must be established to estimate the bulk δ 71 Ga value of the Moon. In general, low-Ti basalts and ferroan anorthosite suite (FAS) rocks have δ 71 Ga values that are lower than high-Ti basalts and KREEP-rich rocks. The observation that rocks derived from later forming LMO cumulates have higher δ 71 Ga values suggests that Ga isotopes are fractionated by processes that operate within the chemically evolving LMO, rather than localized degassing or volatile redistribution. Correlations between indices of plagioclase removal from the LMO (e.g. Eu/Eu*) with Ga isotope ratios suggest that a Δ 71 Ga plagioclase-melt of -0.3‰, (where Δ 71 Ga plagioclase-melt is the isotopic fractionation associated with crystallization of plagioclase from a melt), could drive the observed isotopic fractionation in high-Ti mare basalts and KREEP-rich rocks. This would be consistent with the observation that FAS rocks have δ 71 Ga values that are lower than mare basalts. However, the addition of KREEP-like material into the mare basalt source regions would not contribute enough Ga to perturb the isotopic composition outside of analytical uncertainty. Thus, basalts derived from early formed LMO cumulates such as those from Apollo 15, would preserve light Ga isotopic compositions despite containing modest amounts of urKREEP. We estimate that the δ 71 Ga value of the LMO was ~0.14‰ prior to the onset of plagioclase crystallization and extraction. Whether this δ 71 Ga value is representative of the initial BSM cannot be ascertained from the current dataset. It remains plausible that the Moon accreted with a heavier Ga isotopic composition than the Earth. Alternatively, the Moon and Earth could have accreted with similar isotopic compositions (BSE = 0.00 ± 0.06‰, Kato et al., 2017) and volatile loss drove the LMO to higher δ 71 Ga values prior to formation of the lunar crust.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Loss and Isotopic Fractionation of Alkali Elements during Diffusion-Limited Evaporation from Molten Silicate: Theory and Experiments

Moderately volatile elements (MVEs) are variably depleted in planetary bodies, reflecting the imprints of nebular and planetary processes. Among MVEs, Na, K, and Rb are excellent tracers for unraveling the history of MVE depletion in planetary bodies because they have similar geochemical behaviors but can be chemically fractionated by evaporation and condensation processes. Furthermore, K and Rb are amenable to high-precision isotopic analyses, which can help constrain the conditions of evaporation and condensation. To quantitatively understand why Na, K, and Rb are depleted in planetary bodies, we have carried out vacuum evaporation experiments from basaltic melt at 1200 and 1400 °C to study their evaporation kinetics and isotopic fractionations. We chose this composition because it is relevant to evaporation from small differentiated planetesimals. The Rb isotopic compositions of the evaporation residues were measured by multicollector inductively coupled plasma mass spectrometry (MC-ICPMS), and the K isotopic compositions were measured along profiles across the residues by secondary ion mass spectrometry (SIMS). In the 1400 °C run products, we found that the concentrations of both K and Rb in the run products decreased from core to rim, which was accompanied by a heavy K isotope enrichment near the surface. This indicates that, in this run, evaporation was limited by diffusion. To use those data quantitatively, we derive analytical equations that describe the evaporation rate and isotopic fractionation associated with diffusion-limited evaporation from a sphere, slab, and cylinder in transient and quasi-steady state regimes. This model is used to tease out the roles that diffusive transport in the melt and evaporation at the melt/gas interface play in setting the elemental depletion and isotopic composition of the residue. Under our experimental conditions, volatility decreases in the order of Na, Rb, and K. Using our experimental results in a thermodynamic model, we have estimated the product γΓ of activity coefficients × evaporation coefficients of Na, Rb, and K. The measured isotopic compositions of the residues are well explained using Rayleigh distillations, whereby the relative volatilities of K and Rb isotopes are given by the square root of their masses. We use our results and previously published data to predict how K and Rb could have been lost as a function of temperature, melt composition, oxygen fugacity, and saturation degree relevant to Vesta’s building blocks. We find that the K and Rb depletions, K/Rb elemental fractionation, and δ 41 K and δ 87 Rb isotopic fractionations of Vesta (as sampled by howardite-eucrite-diogenite (HED) meteorites) are best explained by evaporation of submillimeter size objects for 0.1-10 years at moderate temperatures (~1050 °C) in a medium ~98.8% saturated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A standardized quantitative analysis strategy for stable isotope probing metagenomics

ABSTRACT Stable isotope probing (SIP) facilitates culture-independent identification of active microbial populations within complex ecosystems through isotopic enrichment of nucleic acids. Many DNA-SIP studies rely on 16S rRNA gene sequences to identify active taxa, but connecting these sequences to specific bacterial genomes is often challenging. Here, we describe a standardized laboratory and analysis framework to quantify isotopic enrichment on a per-genome basis using shotgun metagenomics instead of 16S rRNA gene sequencing. To develop this framework, we explored various sample processing and analysis approaches using a designed microbiome where the identity of labeled genomes and their level of isotopic enrichment were experimentally controlled. With this ground truth dataset, we empirically assessed the accuracy of different analytical models for identifying active taxa and examined how sequencing depth impacts the detection of isotopically labeled genomes. We also demonstrate that using synthetic DNA internal standards to measure absolute genome abundances in SIP density fractions improves estimates of isotopic enrichment. In addition, our study illustrates the utility of internal standards to reveal anomalies in sample handling that could negatively impact SIP metagenomic analyses if left undetected. Finally, we present SIPmg , an R package to facilitate the estimation of absolute abundances and perform statistical analyses for identifying labeled genomes within SIP metagenomic data. This experimentally validated analysis framework strengthens the foundation of DNA-SIP metagenomics as a tool for accurately measuring the in situ activity of environmental microbial populations and assessing their genomic potential. IMPORTANCE Answering the questions, “who is eating what?” and “who is active?” within complex microbial communities is paramount for our ability to model, predict, and modulate microbiomes for improved human and planetary health. These questions can be pursued using stable isotope probing to track the incorporation of labeled compounds into cellular DNA during microbial growth. However, with traditional stable isotope methods, it is challenging to establish links between an active microorganism’s taxonomic identity and genome composition while providing quantitative estimates of the microorganism’s isotope incorporation rate. Here, we report an experimental and analytical workflow that lays the foundation for improved detection of metabolically active microorganisms and better quantitative estimates of genome-resolved isotope incorporation, which can be used to further refine ecosystem-scale models for carbon and nutrient fluxes within microbiomes.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1990

Compound-specific isotopic analyses: a novel tool for reconstruction of ancient biogeochemical processes

Patterns of isotopic fractionation in biogeochemical processes are reviewed and it is suggested that isotopic fractionations will be small when substrates are large. If so, isotopic compositions of biomarkers will reflect those of their biosynthetic precursors. This prediction is tested by consideration of results of analyses of geoporphyrins and geolipids from the Greenhorn Formation (Cretaceous, Western Interior Seaway of North America) and the Messel Shale (Eocene, lacustrine, southern Germany). It is shown (i) that isotopic compositions of porphyrins that are related to a common source, but which have been altered structurally, cluster tightly and (ii) that isotopic differences between geolipids and porphyrins related to a common source are equal to those observed in modern biosynthetic products. Both of these observations are consistent with preservation of biologically controlled isotopic compositions during diagenesis. Isotopic compositions of individual compounds can thus be interpreted in terms of biogeochemical processes in ancient depositional environments. In the Cretaceous samples, isotopic compositions of n-alkanes are covariant with those of total organic carbon, while delta values for pristane and phytane are covariant with those of porphyrins. In this unit representing an open marine environment, the preserved acyclic polyisoprenoids apparently derive mainly from primary material, while the extractable, n-alkanes derive mainly from lower levels of the food chain. In the Messel Shale, isotopic compositions of individual biomarkers range from -20.9 to -73.4% vs PDB. Isotopic compositions of specific compounds can be interpreted in terms of origin from methylotrophic, chemautotrophic, and chemolithotrophic microorganisms as well as from primary producers that lived in the water column and sediments of this ancient lake.

Non-NASA Center↗
NASA NTRS1991

Isotopic compositions of carbonates and organic carbon from upper Proterozoic successions in Namibia: stratigraphic variation and the effects of diagenesis and metamorphism

The carbon isotope geochemistry of carbonates and organic carbon in the late Proterozoic Damara Supergroup of Namibia, including the Nama, Witvlei, and Gariep groups on the Kalahari Craton and the Mulden and Otavi groups on the Congo Craton, has been investigated as an extension of previous studies of secular variations in the isotopic composition of late Proterozoic seawater. Subsamples of microspar and dolomicrospar were determined, through petrographic and cathodoluminescence examination, to represent the "least-altered" portions of the rock. Carbon-isotopic abundances in these phases are nearly equal to those in total carbonate, suggesting that 13C abundances of late Proterozoic fine-grained carbonates have not been significantly altered by meteoric diagenesis, although 18O abundances often differ significantly. Reduced and variable carbon-isotopic differences between carbonates and organic carbon in these sediments indicate that isotopic compositions of organic carbon have been altered significantly by thermal and deformational processes, likely associated with the Pan-African Orogeny. Distinctive stratigraphic patterns of secular variation, similar to those noted in other, widely separated late Proterozoic basins, are found in carbon-isotopic compositions of carbonates from the Nama and Otavi groups. For example, in Nama Group carbonates delta 13C values rise dramatically from -4 to +5% within a short stratigraphic interval. This excursion suggests correlation with similar excursions noted in Ediacaran-aged successions of Siberia, India, and China. Enrichment of 13C (delta 13C> +5%) in Otavi Group carbonates reflects those in Upper Riphean successions of the Akademikerbreen Group, Svalbard, its correlatives in East Greenland, and the Shaler Group, northwest Canada. The widespread distribution of successions with comparable isotopic signatures supports hypotheses that variations in delta 13C reflect global changes in the isotopic composition of late Proterozoic seawater. Within the Damara basin, carbon-isotopic compositions of carbonates provide a potentially useful tool for the correlation of units between the Kalahari and Congo cratons. Carbonates depleted in 13C were deposited during and immediately following three separate glacial episodes in Namibia. The correspondence between ice ages and negative delta 13C excursions may reflect the effects of lowered sea levels; enhanced circulation of deep, cold, O2-rich seawater; and/or the upwelling of 13C-depleted deep water. Iron-formation is additionally associated with one of the glacial horizons, the Chuos tillite. Carbon-13 enriched isotopic abundances in immediately pre-glacial carbonates suggest that oceanographic conditions favored high rates of organic burial. It is likely that marine waters were stratified, with deep waters anoxic. A prolonged period of ocean stratification would permit the build-up of ferrous iron, probably from hydrothermal sources. At the onset of glaciation, upwelling would have brought 13C-depleted and iron-rich deep water onto shallow shelves where contact with cold, oxygenated surface waters led to the precipitation of ferric iron.

NASA Program Exobiology↗
NASA NTRS2018

Probing Neodymium Isotopic Variations in the Inner Solar System

One of the key problems in planetary science is the identification of the building blocks of Earth, and whether they exist within our current collection of meteorites. Stable mass independent isotopic anomalies, usually nucleosynthetic in origin, are a key tool in fingerprinting material coming from different accretionary regions within the protoplanetary disk. For a number of isotopic systems such as O, Ni, Ti and Cr, enstatite chondrites (EC) appear to be the strongest candidates for Earth's building blocks, despite their low Mg/Si ratios relative to the bulk Earth. It has been proposed that Earth, the Moon-forming impactor and enstatite chondrites all were originally sourced from the same reservoir in the protoplanetary disk, but subsequently experienced divergent chemical evolution pathways. This was recently challenged by who used the correlation between Mo and Nd isotopes in bulk meteorites to argue that such a reservoir does not exist as the isotopic composition of enstatite chondrites is resolvable from Earth. However, in detail the Nd isotopic ratios of EC ((142)Nd/(144)Nd, (148)Nd/(144)Nd, (150)Nd/(144)Nd) show considerable variability, and overlap significantly with the isotopic composition of both the bulk Earth and ordinary chondrites (OC). previously identified Nd isotopic variability in EC, linking it to the degree of equilibration the meteorite had experienced, however they only focused on collecting high precision (142)Nd/(144)Nd, which also has contributions from the decay of the short-lived Sm-146 nuclide (t(sub 1/2) ~103 Myr), making identification of nucleosynthetic anomalies less clear. While the study of reports all the Nd isotopic ratios measured at high precision, only equilibrated EC were analyzed. Therefore, with the currently published data it is unclear to what extent thermal equilibration in the EC is responsible for the variation observed in the stable Nd isotopic ratios, and whether the EC reservoir can be resolved from Earth. In order to better understand the genetic relationship between enstatite chondrites and the Earth we are carrying out a more systematic study including both equilibrated and unequilibrated enstatite chondrites, focusing on high precision analysis of all the stable Nd isotopic ratios.

SOLAR SYSTEM↗
DOE OSTI2021

Behavior of the Mo, Tl, and U isotope systems during differentiation in the Kilauea Iki lava lake

Stable molybdenum (Mo), thallium (Tl), and uranium (U) isotope ratios were determined in a suite of samples from the 1959 Kilauea eruption and from Kilauea Iki lava lake with the aim of understanding the effects of igneous differentiation on these isotope systems. The samples range from olivine cumulate with MgO up to 27% to internal differentiates with MgO less than 3%, representing a tholeiitic differentiation series. Molybdenum, Tl, and U behave incompatibly during differentiation, and Mo and U isotope ratios do not systematically vary amongst the different samples. δ 98 Mo values range from -0.17 to -0.31‰ and δ 238 U values range from -0.20 to -0.38‰. Most individual analyses for both isotope systems overlap within measurement uncertainty (± ~0.7 and ~ 0.6, respectively). Mean δ 98 Mo and δ238U values are -0.22 ± 0.08‰ (2σ) and - 0.29 ± 0.09‰ (2σ), respectively, which overlap with Pacific mid ocean ridge basalt (MORB). In contrast, Tl isotopes show small but resolvable variations, with ε 205 Tl ranging from +1.20 to -1.38. The most negative ε 205 Tl values are confined to some of the lowest [Tl] samples, but the ε 205 Tl values do not otherwise vary smoothly with MgO or [Tl]. Possible mechanisms for thallium isotope fractionation are considered (e.g., degassing, water leaching, sulfide fractionation) but none are found to be satisfactory. Overall, the lack of resolvable variation in the Mo and U isotope systems and the small magnitude of heterogeneity in the Tl isotope system indicate that differentiation in tholeiitic systems is unlikely to be a major contributor to global variation in these isotope systems.

58 GEOSCIENCES↗
DOE OSTI2021

Potassium isotopic fractionation in a humid and an arid soil–plant system in Hawai‘i

Plants play a critical role in the cycling of potassium (K) and the fractionation of its isotopes. However, little is known about K stable isotopic compositions in natural soil–plant systems and possible fractionation during intra-plant transport and root-soil uptake of K. Herein this study focuses on K isotopic fractionation within a humid and an arid soil–plant system sampled on the windward and leeward sides of Kohala Mountain, Hawai‘i. We determined the K isotopic compositions of < 2-mm bulk soil, soil saturation extraction, and selected plant tissues by multi-collector inductively coupled plasma mass spectrometry and X-ray absorption spectroscopy. We studied soils and individual tissue samples such as roots, stems, barks, shoots (a sum of stems and fresh leaves), leaves (fresh and dead), seeds, and flowers of trees and grasses. The results demonstrated that: (i) tissue δ 41 K values ranged from –1.06 ± 0.06 to 1.15 ± 0.09‰; (ii) within the same plant, stems (barks), dead leaves, and reproductive tissues (flowers and seeds) were isotopically lighter compared to fresh leaves, and to a lesser extent, roots; (iii) δ 41 K values of the humid soil (-0.54 ± 0.07 to –0.49 ± 0.06‰) were lower than those of the arid soil (-0.24 ± 0.07 to –0.14 ± 0.06‰); and (iv) soil bioavailable pool δ 41 K (saturation extracts) ranged from –0.63 ± 0.08 to 0.34 ± 0.08‰ and 0.48 ± 0.08 to 0.54 ± 0.10‰ in the humid and arid soils, respectively. From synchrotron-based analysis of K atoms, we identified two major K-bearing phases co-existing as ionic K + and K-pectate association of different fractions. Based on K isotopic and synchrotron data, we conclude that two dominant processes are responsible for plant-mediated K isotopic fractionation, including (1) K redistribution during intra-plant circulation and (2) uptake at the root-soil interface. For intra-plant circulation of K, there is a high affinity of isotopically lighter K to organic complexes as K-pectate, and K-pectate is particularly enriched in roots and fresh leaves. For K uptake at root-soil interface, isotopically lighter K is preferentially taken by roots from soil bioavailable pools following a low-affinity (passive) transport path. Soil K budget in two sites reflects strong source mixing effects with limited plant imprints. This work provides exploratory data on the biogeochemical fractionation of K isotopes in the soil–plant system.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Synthesis, Processing, and Use of Isotopically Enriched Epitaxial Oxide Thin Films

Isotopic engineering has emerged as a key approach to study the nucleation, diffusion, phase transitions, and reactions of materials at an atomic level. It aims to uncover mass transport pathways, kinetics, and operational and failure mechanisms of functional materials and devices. Understanding these phenomena leads to deeper insights into important physical processes, such as the transport of ions in energy conversion and storage devices and the role of active sites and supports during heterogeneous catalytic reactions. Likewise, isotopic engineering is being pursued as a means of modifying functionality to enable future technological applications. In this Account, we summarize our recent work employing isotope labeling (e.g., 18 O 2 and 57 Fe) during thin film synthesis and postgrowth processing to reveal growth mechanisms, defect chemistry, and elemental diffusion under working and extreme conditions. Isotope-resolved analysis techniques with nanometer-scale spatial resolution, such as time-of-flight secondary ion mass spectrometry and atom probe tomography, facilitate the accurate quantification of isotopic placement and concentration in our well-defined heterostructures with precisely positioned, isotope-enriched layers. By measuring the nanometer-scale redistribution between natural abundance and isotopically enriched oxygen layers during the deposition of Fe 2 O 3 and Cr 2 O 3 by molecular beam epitaxy, we identified intermixing processes driven by surface adatoms occurring both at the film growth surface and within the first few layers below the surface. Further insights into synthesis mechanisms were gained by studying the tungsten oxide thin films grown by evaporating WO 3 powder in the presence of background 18 O 2 , revealing minimal incorporation of background oxygen during the film formation process. Thermal and radiation-enhanced diffusion in epitaxial Fe and Cr oxides were precisely tracked using 18 O and 57 Fe tracer layers incorporated into model epitaxial oxide thin films. This approach has allowed us to access thermal diffusion behavior at lower temperatures than previously measured, revealing a potential changeover in diffusion mechanism. Understanding radiation-enhanced diffusion in model oxides that represent the surface layers on the structural components of nuclear reactors informs our understanding of their corrosion behavior under irradiation. Isotopic labeling can also provide unique insights into the surface exchange reactions and defect chemistry of electrocatalysts. For instance, tracking the change in 18 O concentration at the surface of an epitaxial LaNiO 3 thin film after the electrocatalytic oxygen evolution reaction revealed the participation of lattice oxygen, confirming a hypothesis that had been proposed previously. Lastly, we highlight a new direction wherein we perform in situ processing studies utilizing isotopic tracers in conjunction with model epitaxial thin films within the atom probe tomography instrument. Additionally, this Account illustrates the great potential of isotopic engineering to enable fundamental mechanistic insights into physical processes and engineer functional properties in epitaxial films, heterostructures, and superlattices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Particle signal considerations for isotope ratio analysis with single particle multi-collector inductively coupled plasma mass spectrometry

Particle analysis has benefitted from the advent of single particle inductively coupled plasma-mass spectrometry (spICP-MS) due to its robustness, sensitivity, and high-throughput nature. Previous methods of spICP-MS have typically utilized quadrupole or time-of-flight mass analyzers and therefore employ electron multiplier-based detectors (such as secondary electron multipliers or microchannel plates). However, to obtain precise measurements on elemental or isotopic ratios within individual particles, multi-collector ICP-MS (MC-ICP-MS) can be used. Here, we investigate Ce isotope ratios, specifically 142 Ce/ 140 Ce, by spMC-ICP-MS using an all-Faraday cup collector array. Using 1 μm (diameter) cerium dioxide particles, integration times of the Faraday cup detectors were varied from 50–500 ms. The signal from the cerium isotopes in the particles was used to determine isotope ratios, which closely matched the expected natural isotopic abundances. Due to the signal decay response from the Faraday cups, the signal from particles lasts much longer than the expected 1–2 ms (up to 100 s of ms). To explore this effect on isotope ratio analysis, multiple ratio analysis methods were used to determine how to obtain optimal precision and accuracy. Relative differences were around 2% for methods that calculated isotope ratios from summing the total signal of an individual particle before calculating the ratio (rather than using every data point individually). It was found that summing all data points per particle, or integrating under the signal peak, yielded both accurate and precise isotope ratios within the particle population. Particles were also sampled off a solid substrate via microextraction, and isotope ratios were determined with relative differences of 0.13% to 9%. This demonstrates the ability to use spMC-ICP-MS to obtain isotope ratios on particles, with little to no relative difference in comparison to the expected ratio, even when operating Faraday detectors at fast 50 ms integration times.

Szakas, Sarah E. [Oak Ridge National Laboratory (O↗
DOE OSTI2020

Status Update on the High Precision Isotopic Measurements on High Burnup LWR Fuel in 2020

The US Department of Energy (DOE) Office of Nuclear Energy (NE) is currently investigating the feasibility of directly disposing dual-purpose (storage and transportation) canisters (DPCs) in a spent nuclear fuel (SNF) repository. Criticality during the repository performance period (10,000 years or more) is one of the major concerns related to direct disposal of DPCs, specifically as the system undergoes degradation in the repository environment and timeframe. Oak Ridge National Laboratory (ORNL) is developing an as-loaded criticality analysis methodology using full (actinides + fission products) burnup credit that exploits the inherent criticality margin associated with actual canister-specific loading configuration. Burnup credit criticality analysis requires validation of the depletion/decay codes used to generate the burned isotopic inventory of an assembly by comparing the code-predicted inventory with experimentally determined isotopic data. Currently, isotopic measurement data for boiling water reactors (BWR) SNF are limited, and additional measurements will be highly beneficial for BWR burnup credit analysis, which is essential to demonstrate disposability of BWR DPCs. Moreover, new pressurized water reactor (PWR) samples of isotopic measurements will expand the PWR sample population and consequently will greatly improve sample statistics. In turn, this will reduce uncertainty in the computational determination of the isotopic composition of commercial SNF and eliminate additional penalties currently used for lack of data. As part of the isotopic analysis task, eight diverse, high burnup (HBU) samples from several PWR rods are being dissolved and isotopically analyzed to provide high-quality measurement data for PWR SNF to reducing the uncertainties associated with PWR isotopic depletion validation. The isotopics of interest focus on nuclides important to burnup credit, shielding, and decay heat in PWR SNF. Additionally, eight high burnup BWR fuel samples from the Limerick nuclear power plant have been identified for measurement to support reducing uncertainties associated with BWR isotopic depletion validation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1978

Isotopic anomalies in solar system material - What can they tell us

Three relatively recently discovered anomalies are considered. The goal of isotopic research is to understand what phenomena are responsible for the observed isotopic anomalies, and thereby to determine the initial solar system isotopic composition. Until recently there has been no measured isotopic ratios which could not be understood in the context of reasonable physical or chemical processes acting to alter a uniform initial solar isotopic composition. This situation changed in 1969 with the discovery by Black and Pepin of an unusual neon isotopic composition in certain carbonaceous meteories. This unusual composition was later designated as Neon E. An unusual or anomalous oxygen isotopic composition was discovered by Clayton et al. (1973). A magnesium isotopic anomaly was discovered by Gray and Compston (1974), and Lee and Papanastassiou (1974). The three isotopic anomalies are discussed, emphasizing particularly the experimental evidence, possible causes for the observed isotopic composition and finally, possible implications of these anomalies with regard to models of solar system formation and evolution.

Black, D. C.↗
NASA NTRS1993

U-Pb isotopic systematics of ferroan anorthosite 60025

Preliminary U-Pb isotopic data from separates of ferroan anorthosite 60025 confirm its antiquity at approximately 4.42 Ga. Three Pb-Pb isochron ages involving different sets of mineral separates vary by only 20 million years, but indicate derivation of the sets from isotopically distinct magma sources. If this anorthosite was a monomict cumulate product formed during the Moon's early primary differentiation stage, then residual liquids of crystallizing magmas were evolving isotopically, even at the cm-scale, over the duration of the crystallization period. Another explanation is that this sample is simply a polymict breccia and that the Pb isotopic results are a result of subsequent mechanical mixing of mineral assemblages from various cumulate piles formed coevally at approximately 4.42 Ga from isotopically distinct magma sources. In our ongoing search for early lunar Pb isotopic compositions, we have analyzed Apollo 16 anorthosites 67075 and 62337 and Apollo 17 high-Mg suite cumulates (troctolite 76535, norite 78235, and dunite 72415). The U-Pb isotopic systematics have been better behaved in the high-Mg suite rocks than in the anorthosites that have shown evidence of mineral assemblages of mixed parentage. Our aim in analyzing anorthosite 60025 was to avoid or minimize this problem as it had been considered essentially monomict, although recent work has shown that not only is 60025 polymict, but shows textual evidence of at least two episodes of deformation. Of five splits studied by James, Lindstrom and McGee, the four mineral splits appeared monomict, whereas the whole-rock split was considered polymict. Previous isotopic work indicate that this anorthosite was quite primitive, a claim that was apparently confirmed by the U-Pb isotopic age of 4.51 +/- .01 Ga on three plagioclase separates. However, a Sm-Nd internal isochron age of 4.44 +/- 0.02 Ga was determined using plagioclase, olivine, and mafic mineral separates, creating some doubt about the anorthosite's true age. It was pointed out that the use of slightly evolved initial Pb values (corresponding to a source-micron value of approximately 35) to correct the U-Pb data can result in an U-Pb age of 4.44 Ga. The need to resolve the age and isotopic nature of this anorthosite is paramount to furthering our understanding of processes of ferroan anorthosite formation as well as the magmatic history of the early Moon.

Premo, W. R.↗