Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ideality factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

From SOHO to STEREO: Understanding Propagation of Coronal Mass Ejections

Direct comparison between coronal mass ejections (CMEs) from near the Sun and their solar wind counterparts became possible roughly a decade after the discovery of CMEs (Lindsay et aL 1999). This comparison revealed that fast CMEs decelerate and slow CMEs accelerate due to the interaction with the solar wind. Gopalswamy et al (2000) quantified this interaction as an interplanetary acceleration which is useful in predicting the arrival time and speed of CMEs at 1 AU. The interplanetary acceleration is essentially due to the aerodynamic drag between the CME and the solar wind because the propelling force and the solar gravity are effective only near the Sun. Combined remote-sensing and in situ observations from SOHO and Wind/ACE have helped us estimate the influence of the solar wind on the propagation of CMEs. However, these measurements have severe limitations because the remote sensed and in-situ observations correspond to different portions of the CME. Furthermore, the true speeds of Earth-directed CMEs cannot be measured accurately from a spacecraft located along the Sun-Earth line. There have been attempts to model the CME as a cone and get the space speed of the CME, which did improve the travel time predictions. Instruments on board the Solar Terrestrial Relations Observatory (STEREO) mission were able to provide observations of Earth-arriving CMEs without projection effects, while the same CMEs were observed at Sun-Earth L1 by Wind and ACE spacecraft. The quadrature between STEREO and L1 spacecraft presented an ideal situation to study the interplanetary evolution of CMEs and test earlier model results. The quadrature observations did improve the CME travel time predictions, but additional factors such as the unusually slow solar wind, CME cannibalism, and coronal-hole deflection need to be considered to reconcile the difference between observed and predicted travel times. This point is illustrated using the 2011 February 15 CME

Gopalswamy, Natchimuthuk↗
NASA NTRS1962

A Preliminary Theoretical Study of the Expansion Tube, a New Device for Producing High-Enthalpy Short-Duration Hypersonic Gas Flows

The device considered utilizes an unsteady expansion process for the purpose of total-enthalpy multiplication. Analyses were conducted for both perfect and real air in equilibrium, assuming idealized diaphragm bursts, centered expansion waves, and continuum flow. Results of the study showed the expansion tube capable of outperforming the conventional shock tunnel by a factor of approximately 2 in velocity for the same test-section ambient density and pressure. The degree of dissociation is low at all phases of the thermodynamic cycle in the expansion tube; thus the test-section air has a good possibility of being in equilibrium. Maximum pressures involved in the cycle for duplicating a typical reentry from a lunar mission are low enough for existing pressure-vessel techniques. Both the known and anticipated advantages and disadvantages of this new concept are also discussed.

Trimpi, Robert L.↗
NASA NTRS1975

Interplanetary magnetic field direction and the configuration of the day side magnetosphere

The direction of the interplanetary magnetic field appears to have a significant effect on the equilibrium size of the day side magnetosphere. The qualitative features of this effect are illustrated here by means of a simple vacuum model that ignores solar wind and ionospheric plasma densities as a first approximation. This idealized model produces earthward displacements of the subsolar magnetopause and equatorward displacements of the polar cusp associated with southward-turning interplanetary fields that are about a factor of 2 greater than observed displacements. The nonzero solar wind plasma pressure and ionospheric conductivity produce large deviations from the simple vacuum configurations but do not change the qualitative conclusions regarding magnetopause and cusp displacements associated with the north-south component of the interplanetary magnetic field.

Hill, T. W.↗
NASA NTRS1992

Rapid time variations and radiative instabilities of astrophysical masers

The time-varying intensities are obtained for astrophysical masers that are radiatively unstable. Numerical integrations of the time-dependent, nonlinear equations of radiative transfer are performed with the usual approximation of a linear maser. At long times after changes in the physical conditions, the intensity of maser radiation reaches an asymptotic behavior and oscillates permanently in these idealized calculations with a period that is related to the length of the maser divided by the speed of light. The intensity varies by more than a factor of 10. These intensities depend upon the same four parameters as we originally found to determine the regime for radiative instabilities based on a stability analysis of the steady state. A detailed comparison is made between the predictions of the stability analysis and the time variations of the intensities. Calculations are performed for interacting pairs as well as isolated, individual masers.

Scappaticci, Gerardo A.↗
NASA NTRS1995

Design of a three-layer antireflection coating for high efficiency indium phosphide solar cells using a chemical oxide as first layer

It is well known that the behavior of III-V compound based solar cells is largely controlled by their surface, since the majority of light generated carriers (63% for GaAs and 79% for InP) are created within 0.2 mu m of the surface of the illuminated cell. Consequently, the always observed high surface recombination velocity (SRV) on these cells is a serious limiting factor for their high efficiency performance, especially for those with p-n junction made by either thermal diffusion or ion implantation. A good surface passivation layer, ideally a grown oxide as opposed to a deposited one, will cause a significant reduction in the SRV without adding interface problems, thus improving the performance of III-V compound based solar cells. Another significant benefit to the overall performance of the solar cells can be achieved by a substantial reduction of their large surface optical reflection by the use of a well designed antireflection (AR) coating. In this paper, we demonstrate the effectiveness of using a chemically grown thermally and chemically stable oxide, not only for surface passivation but also as an integral part of a 3-layer AR coating for thermally diffused p+n InP solar cells. A phosphorus-rich interfacial oxide, In(PO3)3, is grown at the surface of the p+ emitter using an etchant based on HNO3, o-H3PO4 and H2O2. This oxide has the unique properties of passivating the surface as well as serving as an efficient antireflective layer yielding a measured record high AMO open-circuit voltage of 890.3 mV on a thermally diffused InP(Cd,S) solar cell. Unlike conventional single layer AR coatings such as ZnS, Sb2O3, SiO or double layer AR coatings such as ZnS/MgF2 deposited by e-beam or resistive evaporation, this oxide preserves the stoichiometry of the InP surface. We show that it is possible to design a three-layer AR coating for a thermally diffused InP solar cell using the In(PO3)3 grown oxide as the first layer and Al2O3 and MgF2 as the second and third layers respectively, so as to yield an overall theoretical reflectance of less than 2%. Since chemical oxides are readily grown on III-V semiconductors materials, the technique of using the grown oxide layer to both passivate the surface as well as serve as the first of a multilayer AR coating should work well for all III-V compound-based solar cells.

Moulot, Jacques↗
NASA NTRS1997

T/BEST: Technology Benefit Estimator for Composites and Applications to Engine Structures

Progress in the field of aerospace propulsion has heightened the need to combine advanced technologies. These benefits will provide guidelines for identifying and prioritizing high-payoff research areas, will help manage research with limited resources, and will show the link between advanced and basic concepts. An effort was undertaken at the NASA Lewis Research Center to develop a formal computational method, T/BEST (Technology Benefit Estimator), to assess advanced aerospace technologies, such as fibrous composites, and credibly communicate the benefits of research. Fibrous composites are ideal for structural applications such as high-performance aircraft engine blades where high strength-to-weight and stiffness-to-weight ratios are required. These factors - along with the flexibility to select the composite system and layup, and to favorably orient fiber directions - reduce the displacements and stresses caused by large rotational speeds in aircraft engines.

Chamis, Christos↗
NASA NTRS2021

ED1: Design and Prototype of a 3D Printed Wind Tunnel Model with Integrated Force Measurement

Wind tunnel testing using conventionally manufactured force measurement systems (balances) is able to yield precise and accurate results. These balances are delicate, complex instruments. Due to the nature of this high-precision complexity, balances are expensive and time-consuming to produce. These factors can limit the design potential of the model because using conventionally manufactured balances generally means that the model is designed to accommodate balances that already exist. Ideally, engineers would be able to design a measurement system that is tailored to fit the needs of the model, rather than the other way around. The goal of this research project was to determine if it is possible to overcome these drawbacks by designing a wind tunnel model with a modifiable integrated force measurement system that leverages additive manufacturing. This was undertaken by utilizing the existing UT-63 wind tunnel balance (measurement system), integrating it with a model based on the existing AGARD-B model, and performing stress analysis to optimize the design. Due to time constraints, the result of this endeavor is currently incomplete. Continued analysis and optimization are required to have a thorough understanding of the success or failure of the attempted design. As additive manufacturing technology evolves, the ability for it to become the primary method of fabrication for sensitive measurement systems increases. This project contributes to this by providing one method for design, a framework for optimizing existing balances for additive manufacturing, and resources for performing necessary stress analysis.

Callie Ellsworth↗
NASA NTRSDate not supplied

Defining Pupil Knowledge Requirements for Roman Space Telescope Integrated Payload Assembly Testing

This thesis examines the use of phase retrieval to characterize an optical system under testing conditions with pupil knowledge error. The purpose of this investigation is to define pupil knowledge requirements for the integrated payload testing of the Roman Space Telescope. We have conducted a Monte Carlo study to determine how location uncertainty of the ground support equipment relative to the payload caused by the temperature deformation in the Space Environment Simulator will affect our ability to use image-based wavefront sensing during the test to characterize system alignment. This test will be conducted with significant wavefront error (WFE) present due to gravity sag on the primary mirror. The study incrementally decenters two pieces of ground support equipment and evaluates how the phase retrieval algorithm attempts to fit the wavefront. We conducted this investigation in two steps. First, we used an ideal optical model of the test configuration without the gravity sag on the primary mirror to see the fitting effects related only to pupil knowledge error introduced by the decentering. Then, we used perturbed and gravity sag models to investigate the effects of decentering dependent wavefront effects in addition to pupil knowledge error. The results from the ideal model provided a clear limit of the amount of pupil knowledge error that can be present before seeing significant WFE in the phase retrieval. For the second study, we used the decentering tolerances from the ideal model results to determine the WFE effects of decentering in the presence of gravity sag and system misalignments. The second part of this study will be factored into the overall integrated payload assembly testing WFE budget.

Roman Space Telescope↗
NASA NTRS1995

Design of a Three-Layer Antireflection Coating for High Efficiency Indium Phosphide Solar Cells Using a Chemical Oxide as First Layer

It is well known that the behavior of III-V compound based solar cells is largely controlled by their surface, since the majority of light generated carriers (63% for GaAs and 79% for InP) are created within 0.2 microns of the illuminated surface of the cell. Consequently, the always observed high surface recombination velocity (SRV) on these cells is a serious limiting factor for their high efficiency performance, especially for those with the p-n junction made by either thermal diffusion or ion implantation. A good surface passivation layer, ideally, a grown oxide as opposed to a deposited one, will cause a significant reduction in the SRV without adding interface problems, thus improving the performance of III-V compound based solar cells. Another significant benefit to the overall performance of the solar cells can be achieved by a substantial reduction of their large surface optical reflection by the use of a well designed antireflection (AR) coating. In this paper, we demonstrate the effectiveness of using a chemically grown, thermally and chemically stable oxide, not only for surface passivation but also as an integral part of a 3- layer AR coating for thermally diffused p(+)n InP solar cells. A phosphorus-rich interfacial oxide, In(PO3)3, is grown at the surface of the p(+) emitter using an etchant based on HNO3, o-H3PO4 and H2O2. This oxide has the unique properties of passivating the surface as well as serving as a fairly efficient antireflective layer yielding a measured record high AM0, 25 C, open-circuit voltage of 890.3 mV on a thermally diffused InP(Cd,S) solar cell. Unlike conventional single layer AR coatings such as ZnS, Sb2O3, SiO or double layer AR coatings such as ZnS/MgF2 deposited by e-beam or resistive evaporation, this oxide preserves the stoichiometry of the InP surface. We show that it is possible to design a three-layer AR coating for a thermally diffused InP solar cell using the In(PO3)3 grown oxide as the first layer and Al2O3, MgF2 or ZnS, MgF2 as the second and third layers respectively, so as to yield an overall theoretical reflectance of less than 2%. Since chemical oxides are readily grown on III-V semiconductor materials, the technique of using the grown oxide layer to both passivate the surface as well as serve as the first of a multilayer AR coating, should work well for essentially all III-V compound-based solar cells.

Moulot, Jacques↗
NASA NTRS2006

Shuttle Debris Impact Tool Assessment Using the Modern Design of Experiments

Computational tools have been developed to estimate thermal and mechanical reentry loads experienced by the Space Shuttle Orbiter as the result of cavities in the Thermal Protection System (TPS). Such cavities can be caused by impact from ice or insulating foam debris shed from the External Tank (ET) on liftoff. The reentry loads depend on cavity geometry and certain Shuttle state variables, among other factors. Certain simplifying assumptions have been made in the tool development about the cavity geometry variables. For example, the cavities are all modeled as shoeboxes , with rectangular cross-sections and planar walls. So an actual cavity is typically approximated with an idealized cavity described in terms of its length, width, and depth, as well as its entry angle, exit angle, and side angles (assumed to be the same for both sides). As part of a comprehensive assessment of the uncertainty in reentry loads estimated by the debris impact assessment tools, an effort has been initiated to quantify the component of the uncertainty that is due to imperfect geometry specifications for the debris impact cavities. The approach is to compute predicted loads for a set of geometry factor combinations sufficient to develop polynomial approximations to the complex, nonparametric underlying computational models. Such polynomial models are continuous and feature estimable, continuous derivatives, conditions that facilitate the propagation of independent variable errors. As an additional benefit, once the polynomial models have been developed, they require fewer computational resources to execute than the underlying finite element and computational fluid dynamics codes, and can generate reentry loads estimates in significantly less time. This provides a practical screening capability, in which a large number of debris impact cavities can be quickly classified either as harmless, or subject to additional analysis with the more comprehensive underlying computational tools. The polynomial models also provide useful insights into the sensitivity of reentry loads to various cavity geometry variables, and reveal complex interactions among those variables that indicate how the sensitivity of one variable depends on the level of one or more other variables. For example, the effect of cavity length on certain reentry loads depends on the depth of the cavity. Such interactions are clearly displayed in the polynomial response models.

DeLoach, R.↗
NASA NTRSDate not supplied

Using Satellite Soil Moisture and Rainfall in the Landslide Hazard Assessment for Situational Awareness System

The Landslide Hazard Assessment for Situational Awareness system(LHASA)gives a global view of landslide hazard in nearly real time. Currently, it is being upgraded from version 1 to version 2, which entails improvements along several dimensions. These include the incorporation of new predictors, machine learning, and new event-based landslide inventories. As a result, LHASA version 2 substantially improves on the prior performanceand introduces a probabilistic element to the global landslide nowcast. Data from the soil moisture active-passive (SMAP) satellite has been assimilated into a globally consistent data product with a latency less than 3 days, known as SMAP Level 4. In LHASA, thesedata representthe antecedent conditions prior to landslide-triggering rainfall. In some cases, soil moisture may have accumulated over aperiod of many months. The model behind SMAP Level 4 also estimates the amount of snow on the ground, which is an important factor in some landslide events. LHASA also incorporates this information as an antecedent condition that modulates the response torainfall. Slope, lithology, and active faults were also used as predictor variables. These factors can have a strong influence on where landslides initiate.LHASA relies on precipitation estimates from the Global Precipitation Measurement mission to identify the locations where landslides are most probable. The low latency and consistent global coverage of these data make them ideal for real-time applications at continental to global scales. LHASA relies primarily on rainfall from the last 24 hours to spothazardous sites, which is rescaled by the local 99thpercentile rainfall.However, the multi-day latency of SMAP requires the use of a 2-day antecedent rainfall variable to represent the accumulation of rain between the antecedent soil moisture and current rainfall. LHASA merges these predictors with XGBoost, a commonly used machine-learning tool, relying on historical landslide inventories to develop the relationship between landslide occurrence and various risk factors. The resulting model relies heavily on current daily rainfall, but other factors also play an important role. LHASA outputsthe probability oflandslide occurrence ona grid of roughly one kilometer over all continents from 60 North to 60 South latitude. Evaluation over the period 2019-2020 showsthat LHASA version 2 doubles the accuracy of the global landslide nowcast without increasing the global false alarm rate. LHASA also identifies the areas where the human exposure to landslide hazard is most intense. Landslide hazard is divided into 4 levels: minimal, low, moderate, and high. Next, the number of persons and the length of major roads (primary and secondary roads)within each of these areas is calculated for every second-level administrative district (county). These results can be viewedthrough a web portal hosted at the Goddard Space Flight Center. In addition, users can download daily hazard and exposure data.LHASAversion 2uses machine learning and satellite data to identify areas of probable landslide hazard within hours of heavy rainfall. Itsglobal maps are significantly more accurate, and it now includes rapid estimates of exposed populations and infrastructure. In addition, a forecast mode will be implemented soon.

Thomas Stanley↗
NASA NTRS1983

Real gas flow fields about three dimensional configurations

Real gas, inviscid supersonic flow fields over a three-dimensional configuration are determined using a factored implicit algorithm. Air in chemical equilibrium is considered and its local thermodynamic properties are computed by an equilibrium composition method. Numerical solutions are presented for both real and ideal gases at three different Mach numbers and at two different altitudes. Selected results are illustrated by contour plots and are also tabulated for future reference. Results obtained compare well with existing tabulated numerical solutions and hence validate the solution technique.

Balakrishnan, A.↗
NASA NTRS2004

Rice: Characterizing the Environmental Response of a Gibberellic Acid-Deficient Rice for Use as a Model Crop

Rice (Oryza sativa L.) is a useful model crop plant. Rice was the first crop plant to have its complete genome sequenced. Unfortunately, even semi-dwarf rice cultivars are 60 to 90 an tail, and large plant populations cannot be grown in the confined volumes of greenhouses and growth chambers. We recently identified an extremely short (20 em tall) rice line, which is an ideal model for larger rice cultivars. We called this line "Super Dwarf rice." Here we report the response of Super Dwarf to temperature, photoperiod, photosynthetic photon flux (PPF), and factors that can affect time to head emergence. Vegetative biomass increased 6% per degree Celsius, with increasing temperature from 27 to 31 C. Seed yield decreased by 2% per degree Celsius rise in temperature, and as a result, harvest index decreased from 60 to 54%. The time to heading increased by 2 d for every hour above a 12-h photoperiod. Yield increased with increasing PPF up to the highest level tested at 1800 micro-mol/sq m/s (12-h photoperiod; 77.8 mol/sq m/d). Yield efficiency (grams per mole of photons) increased to 900 micro-mol/sq m/s and then slightly decreased at 1800 micro-mol/sq m/s . Heading was delayed by addition of gibberellic acid 3 (GA,) to the root zone but was hastened under mild N stress. Overall, short stature, high yield, high harvest index, and no extraordinary environmental requirements make Super Dwarf rice an excellent model plant for yield studies in controlled environments.

Frantz, Jonathan M.↗
NASA NTRS2007

Variability in Global Top-of-Atmosphere Shortwave Radiation Between 2000 and 2005

Measurements from various instruments and analysis techniques are used to directly compare changes in Earth-atmosphere shortwave (SW) top-of-atmosphere (TOA) radiation between 2000 and 2005. Included in the comparison are estimates of TOA reflectance variability from published ground-based Earthshine observations and from new satellite-based CERES, MODIS and ISCCP results. The ground-based Earthshine data show an order-of-magnitude more variability in annual mean SW TOA flux than either CERES or ISCCP, while ISCCP and CERES SW TOA flux variability is consistent to 40%. Most of the variability in CERES TOA flux is shown to be dominated by variations global cloud fraction, as observed using coincident CERES and MODIS data. Idealized Earthshine simulations of TOA SW radiation variability for a lunar-based observer show far less variability than the ground-based Earthshine observations, but are still a factor of 4-5 times more variable than global CERES SW TOA flux results. Furthermore, while CERES global albedos exhibit a well-defined seasonal cycle each year, the seasonal cycle in the lunar Earthshine reflectance simulations is highly variable and out-of-phase from one year to the next. Radiative transfer model (RTM) approaches that use imager cloud and aerosol retrievals reproduce most of the change in SW TOA radiation observed in broadband CERES data. However, assumptions used to represent the spectral properties of the atmosphere, clouds, aerosols and surface in the RTM calculations can introduce significant uncertainties in annual mean changes in regional and global SW TOA flux.

Loebe, Norman G.↗
NASA NTRS2012

Martian and Asteroid Dusts as Toxicological Risks for Human Exploration Missions

As the lunar dust toxicity project winds down, our attention is drawn to the potential toxicity of dust present at the surface of more distant celestial objects. Lunar dust has proven to be surprisingly toxic to the respiratory systems of test animals, so one might expect dust from other celestial bodies to hold toxicological surprises for us. At this point all one can do is consider what should be known about these dusts to characterize their toxicity, and then ask to what extent that information is known. In an ideal world it might be possible to suggest an exposure standard based on the known properties of a celestial dust without direct testing of the dust in laboratory animals. Factors known to affect the toxicity of mineral dusts under some conditions include the following: particle size distribution, particle shape/porosity, mineralogical properties (crystalline vs. amorphous), chemical properties and composition, and surface reactivity. Data from a recent Japanese mission to the S-type asteroid Itokawa revealed some surprises about the dust found there, given that there is only a very week gravitational field to hold the dust on the surface. On Mars the reddish-brown dust is widely distributed by global dust storms and by local clusters of dust devils. Past surface probes have revealed some of the properties of dust found there. Contemporary data from Curiosity and other surface probes will be weighed against the data needed to set a defensible safe exposure limit. Gaps will emerge.

James, John T.↗
NASA NTRS1949

On Wind Tunnel Tests and Computations Concerning the Problem of Shrouded Propellers

Results of measurements on a shrouded propeller are given. The propeller is designed for the high ratio of advance and high thrust loading. The effect of the shape of propeller and shroud upon the aerodynamic coefficients of the propulsion unit can be seen from the results. The highest efficiency measured is 0.71. The measurements permit the conclusion that the maximum efficiency can be essentially improved by shroud profiles of small chord and thickness. The largest static thrust factor of merit measured reaches according to Bendemann, a value of about zeta = 1.1. By the use of a nose split flap the static thrust for thin shroud profiles with small nose radius can be about doubled. In a separate section numerical investigations of the behavior of shrouded propellers for the ideal case and for the case with energy losses are carried out. The calculations are based on the assumption that the slipstream cross section depends solely on the shape of the shroud and not on the propeller loading. The reliability of this hypothesis is confirmed experimentally and by flow photographs for a shroud with small circulation. Calculation and test are also in good agreement concerning efficiency and static thrust factor of merit. The prospects of applicability for shrouded propellers and their essential advantages are discussed.

Kruger, W.↗
NASA NTRS1975

A random search algorithm for laboratory computers

The small laboratory computer is ideal for experimental control and data acquisition. Postexperimental data processing is often performed on large computers because of the availability of sophisticated programs, but costs and data compatibility are negative factors. Parameter optimization can be accomplished on the small computer, offering ease of programming, data compatibility, and low cost. A previously proposed random-search algorithm ('random creep') was found to be very slow in convergence. A method is proposed (the 'random leap' algorithm) which starts in a global search mode and automatically adjusts step size to speed convergence. A FORTRAN executive program for the random-leap algorithm is presented which calls a user-supplied function subroutine. An example of a function subroutine is given which calculates maximum-likelihood estimates of receiver operating-characteristic parameters from binary response data. Other applications in parameter estimation, generalized least squares, and matrix inversion are discussed.

Curry, R. E.↗
NASA NTRS2005

1 - 100 GeV Emission from Millisecond Pulsars

A number of rotation-powered millisecond pulsars are powerful sources of high-energy emission, detected so far at X-ray wavelengths. We present predictions for the spectral characteristics of these sources at gamma-ray energies, using a model for acceleration and pair cascades on open magnetic field lines above the polar caps. Although these pulsars have low surface magnetic fields, their short periods allow them to have large magnetospheric potential drops, but the majority do not produce sufficient pairs to completely screen the accelerating electric field. In these sources, the primary and secondary electrons continue to accelerate to high altitude and their Lorentz factors are limited by curvature and synchrotron radiation reaction. The resulting radiation above 1 GeV comes from curvature radiation by primary electrons with radiation-reaction-limited Lorentz factors. The spectra are very hard power-laws with exponential cutoffs between 1 and 50 GeV, and the spectral power peaks near the cutoff energy. Millisecond pulsars are thus ideal targets for air-Cherenkov detectors that are able to reach energy thresholds below 50 GeV.

Harding, Alice K.↗