Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ignition probability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Soot and Spectral Radiation Modeling for a High-Pressure Turbulent Spray Flame

Simulations are performed of a transient high-pressure turbulent n-dodecane spray flame under engine-relevant conditions. An unsteady RANS formulation is used, with detailed chemistry, a semi-empirical two-equation soot model, and a particle-based transported composition probability density function (PDF) method to account for unresolved turbulent fluctuations in composition and temperature. Results from the PDF model are compared with those from a locally well-stirred reactor (WSR) model to quantify the effects of turbulence-chemistry-soot interactions. Computed liquid and vapor penetration versus time, ignition delay, and flame lift-off height are in good agreement with experiment, and relatively small differences are seen between the WSR and PDF models for these global quantities. Computed soot levels and spatial soot distributions from the WSR and PDF models show large differences, with PDF results being in better agreement with experimental measurements. An uncoupled photon Monte Carlo method with line-by-line spectral resolution is used to compute the spectral intensity distribution of the radiation leaving the flame. This provides new insight into the relative importance of molecular gas radiation versus soot radiation, and the importance of turbulent fluctuations on radiative heat transfer.

33 ADVANCED PROPULSION SYSTEMS↗

Modeling the Risk of Fire/Explosion Due to Oxidizer/Fuel Leaks in the Ares I Interstage

A significant flight hazard associated with liquid propellants, such as those used in the upper stage of NASA's new Ares I launch vehicle, is the possibility of leakage of hazardous fluids resulting in a catastrophic fire/explosion. The enclosed and vented interstage of the Ares I contains numerous oxidizer and fuel supply lines as well as ignition sources. The potential for fire/explosion due to leaks during ascent depends on the relative concentrations of hazardous and inert fluids within the interstage along with other variables such as pressure, temperature, leak rates, and fluid outgasing rates. This analysis improves on previous NASA Probabilistic Risk Assessment (PRA) estimates of the probability of deflagration, in which many of the variables pertinent to the problem were not explicitly modeled as a function of time. This paper presents the modeling methodology developed to analyze these risks.

Ring, Robert W.↗

Hydrogen Plus Other Alternative Fuels Risk Assessment Models (HyRAM+) (Technical Reference Manual V.4)

The HyRAM+ software toolkit provides a basis for conducting quantitative risk assessment and consequence modeling for hydrogen, methane, and propane infrastructure and transportation systems. HyRAM+ is designed to facilitate the use of state-of-the-art science and engineering models to conduct robust, repeatable assessments of safety, hazards, and risk. HyRAM+ includes generic probabilities for equipment failures, probabilistic models for the impact of heat flux on humans and structures, and experimentally validated first-order models of release and flame physics. HyRAM+ integrates deterministic and probabilistic models for quantifying accident scenarios, predicting physical effects, and characterizing hazards (thermal effects from jet fires, overpressure effects from delayed ignition), and assessing impact on people and structures. HyRAM+ is developed at Sandia National Laboratories to support the development and revision of national and international codes and standards. HyRAM+ is a research software in active development and thus the models and data may change. This report will be updated at appropriate developmental intervals. This document provides a description of the methodology and models contained in HyRAM+ version 4.0. The most significant change for HyRAM+ version 4.0 from HyRAM version 3.1 is the incorporation of other alternative fuels, namely methane (as a proxy for natural gas) and propane into the toolkit. This change necessitated significant changes to the installable graphical user interface as well as changes to the back-end Python models. A second major change is the inclusion of physics models for the overpressure associated with the delayed ignition of an unconfined jet/plume of flammable gas.

02 PETROLEUM↗

Origin and Prevention of Crash Fires in Turbojet Aircraft

The tendency for the jet engine rotor to continue to rotate after crash presents the probability that crash-spilled combustibles suspended in the air or puddled on the ground at the engine inlet may be sucked into the engine. Studies with jet engines operating on a test stand and full-scale crashes of turbojet-powered airplanes showed that combustibles drawn into the engine in this way ignite explosively within the engine. Experiment showed that the gas flow through the engine is too rapid to permit the ignition of ingested combustibles on the hot metal in contact with the main gas stream. Ignition will occur on those hot surfaces not in the main gas stream. The portion of the engine airflow is diverted for cooling and ventilation to these zones where the gas moves slowly enough for ignition to occur.

Pinkel, I. Irvin↗

Global burned area increasingly explained by climate change

Fire behaviour is changing in many regions worldwide. However, nonlinear interactions between fire weather, fuel, land use, management and ignitions have impeded formal attribution of global burned area changes. Here, in this work, we demonstrate that climate change increasingly explains regional burned area patterns, using an ensemble of global fire models. The simulations show that climate change increased global burned area by 15.8% (95% confidence interval (CI) [13.1–18.7]) for 2003–2019 and increased the probability of experiencing months with above-average global burned area by 22% (95% CI [18–26]). In contrast, other human forcings contributed to lowering burned area by 19.1% (95% CI [21.9–15.8]) over the same period. Moreover, the contribution of climate change to burned area increased by 0.22% (95% CI [0.22–0.24]) per year globally, with the largest increase in central Australia. Our results highlight the importance of immediate, drastic and sustained GHG emission reductions along with landscape and fire management strategies to stabilize fire impacts on lives, livelihoods and ecosystems.

54 ENVIRONMENTAL SCIENCES↗

Interaction of 0.53 {mu}m laser pulse with millimeter-scale plasmas generated by gasbag target

Detailed research on the interaction of a 0.53 {mu}m laser pulse with millimeter-scale plasmas produced by a gasbag target on the Shengguang-II facility is presented. The x-ray pinhole images confirm that millimeter-scale plasmas are generated and the x-ray framing images show a temporal window of 0.6-1.1 ns during which the millimeter-scale plasmas exist. The electron temperature is measured with a collective Thomson scattering system, providing 0.64 keV for C{sub 5}H{sub 12} and 1.8 keV for Xe plasmas. The electron density is inferred from the stimulated Raman scattering spectra. The experimental spectra show large differences for C{sub 5}H{sub 12}- and Xe-filled gasbags. A one-dimensional code based upon steady-state, kinetic linear theory is applied to calculate the stimulated Raman scattering spectra. Excellent agreement between the calculated and experimental results shows that the plasma parameters, especially the electron density and the temperature, dominate the disruption behavior of stimulated Raman scattering. The results also indicate that stimulated Raman scattering is probably located within specific region of the gasbag. The time-integrated reflectivity of both the stimulated Raman and Brillouin scattering is at a low level, even in the conditions of high laser intensity (1.5 Multiplication-Sign 10{sup 15} W/cm{sup 2}) and no beam-smoothing. The experimental results are promising for future ignition experiments with a 0.53 {mu}m laser as the driver.

2-METHYLBUTANE↗

A RE-EVALUATION OF THE EVOLVED STARS IN THE GLOBULAR CLUSTER M13

We have analyzed photometry from space- and ground-based cameras to identify all bright red giant branch (RGB), horizontal branch (HB), and asymptotic giant branch (AGB) stars within 10' of the center of the globular cluster M13. We identify a modest (7%) population of HB stars redder than the primary peak (including RR Lyrae variables at the blue end of the instability strip) that is somewhat more concentrated to the cluster core than the rest of the evolved stars. We find support for the idea that they are noticeably evolved and in the late stages of depleting helium in their cores. This resolves a disagreement between distance moduli derived from the tip of the RGB and from stars in or near the RR Lyrae instability strip. We identified disagreements between HB model sets on whether stars with T{sub eff} {approx}< 10, 000 K (near the 'knee' of the HB in optical CMDs) should evolve redward or blueward, and the differences may depend on the inclusion of diffusion in the stellar interior. The sharp cut at the red end of M13's HB provides strong evidence that stars from the dominant HB group still must be undergoing blue loops, which implies that diffusion is being inhibited. We argue that M13's HB is a somewhat pathological case-the dominant HB population occurs very near the 'knee' in optical CMDs, and evolved stars exclusively appear redward of that peak, leading to the incorrect appearance of a continuation of the unevolved HB. We identify two stars as 'blue hook' star candidates-the faintest stars in optical bands that remain significantly subluminous in the shortest ultraviolet wavelength photometry available. M13 also has a distinct group of stars previously identified with the 'second U jump'. Based on far-UV photometry, we find that these stars have genuinely high temperatures (probably 26,000 K {approx}<T{sub eff} {approx}< 31, 000 K), and are not produced by a jump in brightness at lower temperature (T{sub eff} {approx} 22, 000 K) as previously suggested. These stars are brighter than other stars of similar color (either redder or bluer), and may be examples of 'early hot flashers' that ignite core helium fusion shortly after leaving the RGB. We used ultraviolet photometry to identify hot post-HB stars, and based on their numbers (relative to canonical AGB stars) we estimate the position on the HB where the morphology of the post-HB tracks change to I {approx} 17.3, between the two peaks in the HB distribution. Concerning the possibility of helium enrichment in M13, we revisited the helium-sensitive R ratio, applying a new method for correcting star counts for larger lifetimes of hot HB stars. We find that M13's R ratio is in agreement with theoretical values for primordial helium abundance Y{sub P} = 0.245 and inconsistent with a helium enhancement {Delta}Y = 0.04. The brightness of the HB (both in comparison to the end of the canonical HB and to the tip of the RGB) also appears to rule out the idea that the envelopes of the reddest HB stars have been significantly enriched in helium. The absolute colors of the turnoffs of M3 and M13 potentially may be used to look for differences in their mean helium abundances, but there are inconsistencies in current data sets between colors using different filters that prevent a solid conclusion. The numbers of stars on the lower RGB and in the red giant bump agree very well with recent theoretical models, although there are slight indications of a deficit of red giant stars above the bump. There is not convincing evidence that a large fraction of stars leave the RGB before undergoing a core helium flash.

79 ASTRONOMY AND ASTROPHYSICS↗

Large-eddy Simulations of Spray Variability Effects on Flow Variability in a Direct-injection Spark-ignition Engine Under Non-combusting Operating Conditions

Large-eddy Simulations (LES) have been carried out to investigate spray variability and its effect on cycle-to-cycle flow variability in a direct-injection spark-ignition (DISI) engine under non-reacting conditions. Initial simulations were performed of an injector in a constant volume spray chamber to validate the simulation spray set-up. Comparisons showed good agreement in global spray measures such as the penetration. Local mixing data and shot-to-shot variability were also compared using Rayleigh-scattering images and probability contours. The simulations were found to reasonably match the local mixing data and shot-to-shot variability using a random-seed perturbation methodology. After validation, the same spray set-up with only minor changes was used to simulate the same injector in an optically accessible DISI engine. Particle Image Velocimetry (PIV) measurements were used to quantify the flow velocity in a horizontal plane intersecting the spark plug gap. The engine was operated in a skip-fired operating mode and comparisons focused on cycles that included fuel injection, but no spark event and therefore no combustion. 105 total LES engine cycles were simulated using a parallel cycle simulation approach and 3 different perturbation methods in an attempt to isolate the effects of shot-to-shot spray variability and the initial turbulent flow field as well as their interaction effects on overall engine CCVs. The experimental mean and standard deviations were reasonably well matched by the simulations, though quantitative comparisons near the injection event during the intake stroke were difficult due to the high uncertainty in the PIV measurements at these crank angles. The 3 simulation perturbation methods resulted in very similar results, though further analysis found the current parallel cycle approach may be limiting the ability of the simulations to isolate the spray and flow effects.

Cycle-to-cycle Variability↗

Machine learning assisted bayesian inference of mix and hot-spot conditions in NIF implosions

Experiments on the National Ignition Facility (NIF) have provided clear evidence of ablator material mixing into the Hot-Spot, leading to degraded performance. However, inferring the amount of mix and Hot-Spot conditions from typical experimental observations (e.g. x-ray spectra and images) is highly challenging. Here, we have developed an analysis method that utilizes machine learning assisted Bayesian inference to find the probability distributions of the Hot-Spot and mix conditions. This approach uses a neural network, trained on an idealized 2-dimensional representation of the Hot-Spot and mix distribution, and Bayesian inference to find the statistical distributions of Hot-Spot conditions that provide a match with observations. We have tested this method with synthetic data from simulations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Studying Nuclear Astrophysics at NIF

The National Ignition Facility's primary goal is to generate fusion energy. But the starlike conditions that it creates will also enable NIF scientists to study astrophysically important nuclear reactions. When scientists at the stadium-sized National Ignition Facility attempt to initiate fusion next year, 192 powerful lasers will direct 1.2 MJ of light energy toward a two-mm-diameter pellet of deuterium ({sup 2}H, or D) and tritium ({sup 3}H, or T). Some of that material will be gaseous, but most will be in a frozen shell. The idea is to initiate 'inertial confinement fusion', in which the two hydrogen isotopes fuse to produce helium-4, a neutron, and 17.6 MeV of energy. The light energy will be delivered to the inside walls of a hohlraum, a heavy-metal, centimeter-sized cylinder that houses the pellet. The container's heated walls will produce x rays that impinge on the pellet and ablate its outer surface. The exiting particles push inward on the pellet and compresses the DT fuel. Ultimately a hot spot develops at the pellet's center, where fusion produces {sup 4}He nuclei that have sufficient energy to propagate outward, trigger successive reactions, and finally react the frozen shell. Ignition should last several tens of picoseconds and generate more than 10 MJ of energy and roughly 10{sup 19} neutrons. The temperature will exceed 10{sup 8} K and fuel will be compressed to a density of several hundred g/cm{sup 3}, both considerably greater than at the center of the Sun. The figure shows a cutaway view of NIF. The extreme conditions that will be produced there simulate those in nuclear weapons and inside stars. For that reason, the facility is an important part of the US stockpile stewardship program, designed to assess the nation's aging nuclear stockpile without doing nuclear tests. In this Quick Study we consider a third application of NIF - using the extraordinary conditions it will produce to perform experiments in basic science. We will focus on measurements of some of the nuclear reaction probabilities that are important to nuclear astrophysics, the field that relates energy production and nucleosynthesis from nuclear reactions in stars and in the Big Bang to the environments in which those nuclear reactions occur. NIF, unlike previous nuclear-physics facilities, will enable measurements of nuclear reactions at the temperatures, densities, and ionization states similar to those that occur in stars.

42 ENGINEERING↗

DASCH DISCOVERY OF LARGE AMPLITUDE {approx}10-100 YEAR VARIABILITY IN K GIANTS

Here we present the discovery of three unusual long-term variables found in the Digital Access to a Sky Century at Harvard project, with {approx}1 mag variations in their light curves on {approx}10-100 year timescales. They are all spectroscopically identified as K2III giant stars, probably in the thick disk. Their light curves do not match those previously measured for known types of variable stars, or any theoretical model reported for red giants, and instead suggest a new dust formation mechanism or the first direct observation of 'short' timescale evolution-driven variability. More theoretical work on the lithium flash near the red giant branch bump and the helium shell ignition in the lower asymptotic giant branch, as well as long-term monitoring of K2III thick-disk stars is needed.

79 ASTRONOMY AND ASTROPHYSICS↗

Correlated local dipoles in PbTe

We present a combined single-crystal x-ray diffuse scattering and ab-initio molecular dynamics study of lead telluride, PbTe. Well-known for its thermoelectric and narrow-gap semiconducting properties, PbTe recently achieved further notoriety following the report of an unusual off-centering of the lead atoms, accompanied by a local symmetry breaking, on heating. This observation, which was named emphanisis, ignited considerable controversy regarding the details of the underlying local structure and the appropriate interpretation of the total scattering experiments. In this study, we identify an unusual correlated local dipole formation extending over several unit cells with an associated local reduction of the cubic symmetry in both our x-ray diffuse scattering measurements and our molecular dynamics simulations. Importantly, when averaged spatially or temporally, the most probable positions for the ions are at the centers of their coordination polyhedra. Our results therefore clarify the nature of the local symmetry breaking, and reveal the source of the earlier controversy regarding the existence or absence of off-centering. Finally, we provide an interpretation of the behavior in terms of coupled soft optical and acoustic modes, which is linked also to the high thermoelectric performance of PbTe.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Preconditioning on Post-Soldering Failures in Tantalum Capacitors

Soldering have a strong effect on performance and reliability of most surface mount technology components, including tantalum capacitors. High quality tantalum capacitors are likely the only type of components where soldering simulation is the first step during screening. Nevertheless, post-soldering failures of tantalum capacitors do happen and require additional analysis. Popcorning is a well-known effect in plastic encapsulated microcircuits (PEM) and it occurs also in chip tantalum capacitors. The sensitivity of parts to the presence of moisture during soldering is characterized by the moisture sensitivity level (MSL); however, contrary to PEMs, there is no standard procedure for establishing MSL for tantalum capacitors, and standard J-STD-020 is applicable partially only. In this work, the effect of absorbed moisture on soldering related degradation and failures in tantalum capacitors have been studied using 22 types of polymer and 11 types of MnO2 cathodes tantalum capacitors including single and multianode parts. The amount of moisture released during soldering has been estimated by measurements of mass and capacitance variations. Results show that moisture uptake in similar parts is approximately two times greater in polymer than in MnO2 capacitors. Cracking of the case and degradation of parameters can occur in both types of parts, but MnO2 capacitors are much more susceptible to catastrophic short circuit failures and their ignition is possible during the first power-on cycle. This type of failure in MnO2 capacitors is lot-related, can occur even at derated voltages and relatively low levels of moisture sorption corresponding to room conditions. Baking before soldering is an effective measure to prevent failures even in lots susceptible to popcorning damage. Recommendations for testing to establish MSL and for baking to reduce the probability of failures are suggested.

tantalum polymer capacitors↗

Spallation-altered Accreted Compositions for X-Ray Bursts: Impact on Ignition Conditions and Burst Ashes

Model predictions of X-ray burst ashes and light curves depend on the composition of the material accreted from the companion star, in particular the abundance of CNO elements. It has previously been pointed out that spallation in the atmosphere of the accreting neutron star can destroy heavy elements efficiently. In this work we study this spallation using a realistic reaction network that follows the complete spallation cascade and takes into account not only destruction, but also production of elements by the spallation of heavier species. We find an increased survival probability of heavier elements compared to previous studies, resulting in significantly higher CNO abundances.We provide resulting compositions as a function of accretion rate, and explore their impact on 1D multi-zone X-ray burst models. Finally, we find significant changes in the composition of the burst ashes, which will affect the thermal and compositional structure of accreted neutron star crusts.

79 ASTRONOMY AND ASTROPHYSICS↗

Evolved stars in Omega Centauri. I - Radial distribution of blue subdwarfs

A U - V color-magnitude diagram containing over 5000 stars from 10 fields in Omega Centauri at or brighter than the main-sequence turnoff is presented. Completeness corrections are obtained as a continuous function of magnitude and radial distance are obtained and used to show that the blue subdwarfs are centrally concentrated with respect to subgiants and stars on the horizontal branch proper. The chance probability of this result is less than 1 percent. Since the blue subdwarfs probably consist of helium-burning cores of about 0.5 solar mass surrounded by a thin hydrogen envelope, mass segregation could not produce this result if these stars had evolved singly. Two kinds of possible precursor systems are considered: pairs of degenerate dwarfs which subsequently merge to form helium-burning stars, and moderately wide binaries in which mass transfer is initiated shortly before the helium flash is ignited.

Bailyn, Charles D.↗

Effects of Gasoline Direct Injection Engine Operating Parameters on Particle Number Emissions

A single-cylinder, wall-guided, spark ignition direct injection engine was used to study the impact of engine operating parameters on engine-out particle number (PN) emissions. Experiments were conducted with certification gasoline and a splash blend of 20% fuel grade ethanol in gasoline (E20), at four steady-state engine operating conditions. Independent engine control parameter sweeps were conducted including start of injection, injection pressure, spark timing, exhaust cam phasing, intake cam phasing, and air-fuel ratio. The results show that fuel injection timing is the dominant factor impacting PN emissions from this wall-guided gasoline direct injection engine. The major factor causing high PN emissions is fuel liquid impingement on the piston bowl. By avoiding fuel impingement, more than an order of magnitude reduction in PN emission was observed. Increasing fuel injection pressure reduces PN emissions because of smaller fuel droplet size and faster fuel-air mixing. PN emissions are insensitive to cam phasing and spark timing, especially at high engine load. Cold engine conditions produce higher PN emissions than hot engine conditions due to slower fuel vaporization and thus less fuel-air homogeneity during the combustion process. E20 produces lower PN emissions at low and medium loads if fuel liquid impingement on piston bowl is avoided. At high load or if there is fuel liquid impingement on piston bowl and/or cylinder wall, E20 tends to produce higher PN emissions. This is probably a function of the higher heat of vaporization of ethanol, which slows the vaporization of other fuel components from surfaces and may create local fuel-rich combustion or even pool-fires.

02 PETROLEUM↗

Rate of reaction between molecular hydrogen and molecular oxygen

The shock tube data of Jachimowski and Houghton were rigorously analyzed to obtain rate constants for the candidate initiation reactions H2 + O2 yields H + HO2, H2 + O2 yields H2O + O, and H2 + O2 yields OH + OH. Reaction (01) is probably not the initiation process because the activation energy obtained is less than the endothermicity and because the derived rates greatly exceed values inferred in the literature from the reverse of reaction (01). Reactions (02) and (03) remain as possibilities, with reaction (02) slightly favored on the basis of steric and statistical considerations. The solution of the differential equations is presented in detail to show how the kinetics of other ignition systems may be solved.

Brokaw, R. S.↗

Fog dispersion

A study of economically viable techniques for dispersing warm fog at commercial airports is presented. Five fog dispersion techniques are examined: evaporation suppression, downwash, mixing, seeding with hygroscopic material, thermal techniques, and charged particle techniques. Thermal techniques, although effective, were found to be too expensive for routine airport operations, and detrimental to the environment. Seeding or helicopter downwash are practical for small-scale or temporary fog clearing, but are probably not useful for airport operations on a routine basis. Considerable disagreement exists on the capability of charged particle techniques, which stems from the fact that different assumptions and parameter values are used in the analytical models. Recommendations resulting from the review of this technique are listed, and include: experimental measurements of the parameters in question; a study to ascertain possible safety hazards, such as increased electrical activity or fuel ignition during refueling operations which could render charged particle techniques impractical; and a study of a single charged particle generator.

Frost, W.↗