Search NASA⌕ Search

SEARCH · Search NASA

Results for “Inflatable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Quiet time inflation of the inner magnetosphere in the afternoon and evening quadrants

The quiet-time depression of the magnetic field magnitude in the equatorial inner magnetosphere was studied for the interval Nov. 1971-June 1972. For periods when Kp was less than 2 and Dst was between +10 and -20 gamma, an inflated field region near the magnetic equator was found between noon and midnight. The inflation was greatest at the lowest altitude studied (L = 3) and appeared to be somewhat greater near midnight (-40 gamma) than near noon (-20 gamma). Protons of energy above 100 keV observed on the same satellite appeared to be sufficient to produce the quiet-time inflation.

Lee, Y. C.↗
NASA NTRS1979

Development of inflatable structures for Electron Echo V

The sounding rocket experiment, Electron Echo V, was designed to carry three devices to study the neutralization effects of the rocket upon electron beams emitted into the earth's magnetosphere. One was a 500 square foot current collector screen built on a framework of inflated 'mylar' tubes. The other two were 30 foot long Langmuir probes consisting of inflated tubes with sensor pads at various intervals. These devices were designed to be deployed at an altitude of 92-118 mi (148-190 km) by compressed gas carried in the payload. The development of these large (by sounding rocket standards) inflatables and the methods of packaging and deployment are described.

Oliver, J. A.↗
NASA NTRS1986

Effect of antigravity suit inflation on cardiovascular, PRA, and PVP responses in humans

The effects of lower body and abdominal pressure, produced by antigravity suit inflation, on blood pressure, pulse rate, fluid and electrolyte shift, plasma vasopressin and plasma renin activity in humans in upright postures were studied. Five men and two women stood upright for 3 hr with the suit being either inflated or uninflated. In the control tests, the suit was inflated only during the latter part of the trials. Monitoring was carried out with a sphygnomanometer, with sensors for pulse rates, and using a photometer and osmometer to measure blood serum characteristics. The tests confirmed earlier findings that the anti-g suit eliminates increases in plasma renin activity. Also, the headward redistribution of blood obtained in the tests commends the anti-g suit as an alternative to water immersion or bed rest for initial weightlessness studies.

Kravik, S. E.↗
NASA NTRS1986

Homogeneous cosmological models and new inflation

The promise of the inflationary-universe scenario is to free the present state of the universe from extreme dependence upon initial data. Paradoxically, inflation is usually analyzed in the context of the homogeneous and isotropic Robertson-Walker cosmological models. It is shown that all but a small subset of the homogeneous models undergo inflation. Any initial anisotropy is so strongly damped that if sufficient inflation occurs to solve the flatness and horizon problems, the universe today would still be very isotropic.

Turner, Michael S.↗
NASA NTRS1987

Renal effects of anti-gravity suit inflation in man in relation to cardiovascular and hormonal changes

It is shown that inflation for 3 hr of an antigravity suit that covered the legs and abdomen of normal standing subjects results in significant increases in urine flow, osmolar and free water clearances, total and fractional sodium excretion, and potassium excretion, while glomerular filtration rate and renal plasma flow are transiently increased. Such changes in kidney function are the consequence of the increase in thoracic blood volume induced by inflation which also results in an immediate increase in blood pressure and reflex bradycardia, together with a progressive lowering of plasma renin activity and aldosterone. The changes in kidney excretory patterns brought about by suit inflation appear to be similar in nature and magnitude to those observed during water immersion or in the early phase of bed rest, situations known to result in a headward redistribution of blood.

Geelen, G.↗
NASA NTRS1988

Inevitable inflation in Einstein-Cartan theory with improved energy-momentum tensor with spin

Generalized, or power-law, inflation is shown to necessarily exist for a simple, anisotropic, (Bianchi Type-1) cosmology in the Einstein-Cartan gravitational theory with the Ray-Smalley improved energy momentum tensor with spin. Formal solution of the EC field equations with the fluid equations of motion explicitly shows inflation caused by the RS spin angular kinetic energy density. Shear is not effective in preventing inflation in the ECRS model. The relation between fluid vorticity, torsion, reference axis rotation, and shear ellipsoid precession shows through clearly.

Fennelly, A. J.↗
NASA NTRS1988

Quick-disconnect inflatable seal assembly

A zero-leak cryogenic coupling includes a polymeric seal clamped to a male bayonet member with two pairs of tightening rings. The tightening rings threadably engage each other in respective pairs around tapered ends of the inflatable seal member so that a wedging action tightness the seal member about the male bayonet. Once in place, the seal may be inflated via an inflation port so that its expansion provides a pressure contact with the inside surface of a coaxial female member.

Kurt D Buehler↗
NASA NTRS1989

Inflatable antennas for microwave pwoer transmission

Operational phase of the inflatable radiator; inflatable space structures; advantages; inflated thin-film satellites; antenna configuration; 3 meter diameter test paraboloid (HAIR program); and weight breakdown for the 100 meter diameter reflector are outlined. This presentation is represented by viewgraphs only.

Williams, Geoff↗
NASA NTRS1990

Extended inflation from higher dimensional theories

The possibility is considered that higher dimensional theories may, upon reduction to four dimensions, allow extended inflation to occur. Two separate models are analayzed. One is a very simple toy model consisting of higher dimensional gravity coupled to a scalar field whose potential allows for a first-order phase transition. The other is a more sophisticated model incorporating the effects of non-trivial field configurations (monopole, Casimir, and fermion bilinear condensate effects) that yield a non-trivial potential for the radius of the internal space. It was found that extended inflation does not occur in these models. It was also found that the bubble nucleation rate in these theories is time dependent unlike the case in the original version of extended inflation.

Holman, Richard↗
NASA NTRS1991

Design of an inflatable, optically controlled and fed, phased array antenna

Initial studies on the antenna requirements of the Space Exploration Initiative (SEI) system architecture have indicated the need for large, lightweight antennas. This paper discusses the design of a modular, inflatable, optically controlled and fed phased array antenna suitable for SEI aplications. When high gain antennas are required for space applications, large aperture mesh or collapsible solid antenna reflectors are considered. However, these designs are generally not lightweight, and have complicated deployment mechanisms. Alternatively, the modular, inflatable antenna design discussed here is a lightweight, modular design that incorporates a simple deployment scheme, and after deployment, can be rigidized to enhance its structural integrity. Further, the design features the fiberoptic distribution of both RF and control signals to individual microwave integrated circuit/reflector modules in each of the inflatable, phased array antenna cells. The result of combining these two technologies is a modular, phased array antenna design that is both mechanically and electrically agile and robust.

Kunath, Richard R.↗
NASA NTRS1990

Design of internal support structures for an inflatable lunar habitat

NASA has a long range goal of constructing a fully equipped, manned lunar outpost on the near side of the moon by the year 2015. The proposed outpost includes an inflatable lunar habitat to support crews during missions longer that 12 months. A design for the internal support structures of the inflatable habitat is presented. The design solution includes material selection, substructure design, assembly plan development, and concept scale model construction. Alternate designs and design solutions for each component of the design are discussed. Alternate materials include aluminum, titanium, and reinforced polymers. Vertical support alternates include column systems, truss systems, suspension systems, and lunar lander supports. Horizontal alternates include beams, trusses, floor/truss systems, and expandable trusses. Feasibility studies on each alternate showed that truss systems and expandable trusses were the most feasible candidates for conceptual design. The team based the designs on the properties of 7075 T73 aluminum. The substructure assembly plan, minimizes assembly time and allows crews to construct the habitat without the use of EVA suits. In addition to the design solutions, the report gives conclusions and recommendations for further study of the inflatable habitat design.

Cameron, Elizabeth A.↗
NASA NTRS1992

Inflated concepts for the earth science geostationary platform and an associated flight experiment

Large parabolic reflectors and solar concentrators are of great interest for microwave transmission, solar powered rockets, and Earth observations. Collector subsystems have been under slow development for a decade. Inflated paraboloids have a great weight and package volume advantage over mechanically erected systems and, therefore, have been receiving greater attention recently. The objective of this program was to produce a 'conceptual definition of an experiment to assess in-space structural damping characteristics and effects of the space meteoroid environment upon structural integrity and service life of large inflatable structures.' The flight experiment was to have been based upon an inflated solar concentration, but much of that was being done on other programs. To avoid redundancy, the Earth Science Geostationary Platform (ESGP) was selected as a focus mission for the experiment. Three major areas were studied: the ESGP reflector configuration; flight experiment; and meteoroids.

Friese, G.↗
NASA NTRS1992

Inflatable structures for a lunar base habitat

Design and construction of a structure on the moon requires addressing a host of issues not encountered on earth. A modular quilted inflatable structure consisting of thin membranes of composite material integrated with supporting columns and arches is proposed. An initial linear analysis of the proposed structure is briefly reviewed. The actual response of an inflatable membrane is nonlinear and, hence, a nonlinear numerical analysis for the stresses and displacements was undertaken. Initial results clearly indicate that an inflatable structure is a feasible concept and is ideally suited for a lunar structure.

Nowak, Paul S.↗
NASA NTRS1992

Geometric modeling of inflatable structures for lunar base

A modular inflatable structure consisting of thin, composite membranes is presented for use in a lunar base. Results from a linear elastic analysis of the structure indicate that it is feasible in the lunar environment. Further analysis requires solving nonlinear equations and accurately specifying the geometries of the structural members. A computerized geometric modeling technique, using bicubic Bezier surfaces to generate the geometries of the inflatable structure, was conducted. Simulated results are used to create three-dimensional wire frames and solid renderings of the individual components of the inflatable structure. The component geometries are connected into modules, which are then assembled based upon the desired architecture of the structure.

Nowak, Paul S.↗
NASA NTRS1993

Inflatable structures - A concept for lunar and Martian structures

The paper discusses a modular inflatable structure concept for structures on Mars and the moon (where a human tended base will be constructed as a preliminary to a manned mission to Mars). Attention is also given to the environmental characteristics on the moon, Mars, and the earth, structural requirements for a generic structure for either moon or Mars, the moon/Mars design conditions, and the advantages of inflatable structures. Preliminary design calculations for a generic inflated module of size 6.1 x 6.1 x 3 m are presented.

Sadeh, Willy Z.↗
NASA NTRS1992

An analysis of an inflatable module for planetary surfaces

Design and construction of a structure on planetary surfaces requires addressing a host of issues not encountered on earth. A modular quilted inflatable structure consisting of thin membranes of composite material integrated with supporting columns and arches is proposed. An initial linear analysis of the structure is briefly reviewed. The actual response of an inflatable membrane is nonlinear and, hence, a nonlinear numerical analysis of the stresses and displacements was undertaken. Results based on the loadings on a lunar structure clearly indicate that an inflatable structure is a feasible concept and is ideally suited for a planetary surface structure.

Nowak, Paul S.↗
NASA NTRS1992

A horizontal inflatable habitat for SEI

The inflatable habitat described in this paper is a horizontally-oriented cylindrical pneumatic structure. It is part of NASA's ongoing effort to study inflatables as alternative habitats for the Space Exploration Initiative. This inflatable habitat provides a living and working environment for a crew of 12. It is an 8-m diameter by 45.34-m cylinder containing 2145 cu m of volume. Two levels of living and working areas make up the 547 sq m of floor space.

Kennedy, Kriss J.↗
NASA NTRS1995

Inflatable structures for a lunar base

The first step in the human expansion into space consists of the construction of a human-tended base on the Moon. Establishment of a lunar base depends upon the development of a structure capable of accomodating human life and activities in a shirt sleeve environment. Design and construction of a structure on the Moon require addressing a host of issues and loads that are not encountered on Earth. A lunar structure is essentially a pressure vessel since the internal pressure is the dominating load. The external pressure is effectively an absolute vacuum and the dead loads from both the material mass and a protective regolith layer are quite small due to low lunar gravity. An inflatable structure made of a thin membrane integrated with an inflated supporting frame is highly efficient in resisting the internal pressure loading and the dead loads. Preliminary design computations for a generic lunar inflatable structure are presented.

Sadeh, Willy Z.↗