Search NASA⌕ Search

SEARCH · Search NASA

Results for “JET MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Pressure distribution of a twin-engine upper-surface blown jet-flap model

An investigation has been made to determine the chordwise and spanwise pressure distributions of a small-scale upper-surface blown jet-augmented flap STOL model. The model was powered by two simulated high-bypass-ratio turbofan engines mounted ahead of and above an unswept-untapered wing in a nacelle having a rectangular nozzle. The results of the investigation are presented as tabulated and plotted chordwise pressure distribution coefficients for nine spanwise stations.

Smith, C. C., Jr.↗

Low speed wind tunnel investigation of flight spoilers as trailing-vortex-alleviation devices on an extended-range wide body tri-jet airplane model

An investigation was made in the Langley V/STOL tunnel to determine, by the trailing wing sensor technique, the effectiveness of various segments of the existing flight spoilers on an extended-range wide-body tri-jet transport airplane model when they were deflected as trailing-vortex-alleviation devices. On the transport model with the approach flap configuration, the four combinations of flight-spoiler segments investigated were effective in reducing the induced rolling moment on the trailing wing model by as much as 25 to 45 percent at downstream distances behind the transport model of 9.2 and 18.4 transport wing spans. On the transport airplane model with the landing flap configuration, the four combinations of flight-spoiler segments investigated were effective in reducing the induced rolling moment on the trailing wing model by as much as 35 to 60 percent at distances behind the transport model of from 3.7 to 18.4 transport wing spans, 18.4 spans being the downstream limit of distances used.

Croom, D. R.↗

IMPLICATIONS OF THE VERY HIGH ENERGY GAMMA-RAY DETECTION OF THE QUASAR 3C279

The Major Atmospheric Gamma-Ray Imaging Cherenkov Telescope very high energy (VHE) {gamma}-ray astronomy collaboration recently reported the detection of the quasar 3C279 at >100 GeV {gamma}-ray energies. Here, we present simultaneous optical (BVRI) and X-ray (RXTE PCA) data from the day of the VHE detection and discuss the implications of the snapshot spectral energy distribution for jet models of blazars. A one-zone synchrotron-self-Compton (SSC) origin of the entire spectral energy distribution (SED), including the VHE {gamma}-ray emission is highly problematic as it would require an unrealistically low magnetic field. The measured level of VHE emission could, in principle, be interpreted as Compton upscattering of external radiation (e.g., from the broad-line regions, BLRs). However, such an interpretation would require either an unusually low magnetic field of B {approx} 0.03 G, or (in order to achieve approximate equipartition between magnetic field at B {approx} 0.25 G and relativistic electrons) an unrealistically high Doppler factor of {Gamma} {approx} 140. In addition, such a model fails to reproduce the observed X-ray flux. Furthermore, both versions of leptonic one-zone models produce intrinsic VHE {gamma}-ray spectra steeper than measured, even in the case of the lowest plausible extragalactic {gamma}{gamma} absorption. We therefore conclude that a simple one-zone, homogeneous leptonic jet model is not able to plausibly reproduce the SED of 3C279 including the recently detected VHE {gamma}-ray emission. This as well as the lack of correlated variability in the optical with the VHE {gamma}-ray emission and the substantial {gamma}{gamma} opacity of the BLR radiation field to VHE {gamma}-rays suggests a multi-zone model in which the optical emission is produced in a different region than the VHE {gamma}-ray emission. In particular, an SSC model with an emission region far outside the BLR reproduces the simultaneous X-ray-VHE {gamma}-ray spectrum of 3C279. Alternatively, a hadronic model is capable of reproducing the observed SED of 3C279 reasonably well, both in scenarios in which only the internal synchrotron field serves as targets for p{gamma} pion production, and with a substantial contribution from external photons, e.g., from the BLR. However, either version of the hadronic model requires a rather extreme jet power of up to L{sub j} {approx} 10{sup 49} erg s{sup -1}, compared to a requirement of L{sub j} {approx} 2 x 10{sup 47} erg s{sup -1} for a multi-zone leptonic model.

79 ASTRONOMY AND ASTROPHYSICS↗

A linear shock cell model for jets of arbitrary exit geometry

The shock cell structures of single supersonic non-ideally expanded jets with arbitrary exit geometry are studied. Both vortex sheets and realistic mean profiles are considered for the jet shear layer. The boundary element method is used to predict the shock spacing and screech tones in a vortex sheet model of a single jet. This formulation enables the calculations to be performed only on the vortex sheet. This permits the efficient and convenient study of complicated jet geometries. Results are given for circular, elliptic and rectangular jets and the results are compared with analysis and experiment. The agreement between the predictions and measurements is very good but depends on the assumptions made to predict the geometry of the fully expanded jet. A finite diffference technique is used to examine the effect of finite mixing layer thickness for a single jet. The finite thickness of the mixing layer is found to decrease the shock spacing by approximately 20 percent over the length of the jet potential core.

Morris, P. J.↗

Implications of the VHE {gamma}-Ray Detection of 3C279

We present simultaneous optical (BVRI) and X-ray (RXTE PCA) data on the quasar 3C279 from the day of the recent VHE detection by MAGIC and discuss the implications of the snap-shot spectral energy distribution (SED) for leptonic jet models of blazars. A one-zone synchrotron-self-Compton origin of the SED up to VHE {gamma}-rays can be ruled out. The VHE emission could, in principle, be interpreted as Compton upscattering of external radiation (e.g., from the broad-line regions) in a one-zone leptonic model. However, such an interpretation would require either an unusually low magnetic field of B{approx}0.03 G, or (in order to achieve approximate equipartition between magnetic field at B{approx}0.25 G and relativistic electrons) an unrealistically high Doppler factor of {gamma}{approx}140. In addition, such a model fails to reproduce the observed X-ray flux. We therefore conclude that a simple one-zone, homogeneous leptonic jet model is not able to plausibly reproduce the SED of 3C279 including the recently detected VHE {gamma}-ray emission. This as well as the lag of correlated variability in the optical with the VHE {gamma}-ray emission suggests a multi-zone model in which the optical emission is produced in a different region than the VHE {gamma}-ray emission. Alternatively, also a hadronic origin of the VHE {gamma}-rays seems plausible.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

SPECTRAL EVOLUTION OF SUPERLUMINAL COMPONENTS IN PARSEC-SCALE JETS

We present numerical simulations of the spectral evolution and emission of radio components in relativistic jets. We compute jet models by means of a relativistic hydrodynamics code. We have developed an algorithm (SPEV) for the transport of a population of nonthermal electrons including radiative losses. For large values of the ratio of gas pressure to magnetic field energy density, {alpha}{sub B} {approx} 6 x 10{sup 4}, quiescent jet models show substantial spectral evolution, with observational consequences only above radio frequencies. Larger values of the magnetic field ({alpha}{sub B} {approx} 6 x 10{sup 2}), such that synchrotron losses are moderately important at radio frequencies, present a larger ratio of shocked-to-unshocked regions brightness than the models without radiative losses, despite the fact that they correspond to the same underlying hydrodynamic structure. We also show that jets with a positive photon spectral index result if the lower limit {gamma}{sub min} of the nonthermal particle energy distribution is large enough. A temporary increase of the Lorentz factor at the jet inlet produces a traveling perturbation that appears in the synthetic maps as a superluminal component. We show that trailing components can be originated not only in pressure matched jets, but also in overpressured ones, where the existence of recollimation shocks does not allow for a direct identification of such features as Kelvin-Helmholtz modes, and its observational imprint depends on the observing frequency. If the magnetic field is large ({alpha}{sub B} {approx} 6 x 10{sup 2}), the spectral index in the rarefaction trailing the traveling perturbation does not change much with respect to the same model without any hydrodynamic perturbation. If the synchrotron losses are considered the spectral index displays a smaller value than in the corresponding region of the quiescent jet model.

79 ASTRONOMY AND ASTROPHYSICS↗

Effects of fineness and closure ratios on boattail drag of circular-arc-afterbody models with jet exhaust at Mach numbers up to 1.3

The effects of variations in fineness ratio and closure ratio on the boattail drag of circular-arc afterbody models were investigated at static conditions and at Mach numbers from 0.40 to 1.30. Jet total-pressure ratio was varied from jet off to about 6, depending on Mach number. Reynolds number based on model maximum diameter varied from about 1.2 million to 2.18 million. Angle of attack was varied from -4 deg to 8 deg. The results indicate that, at subsonic speeds before the drag rise and at a scheduled pressure ratio, the total drag (pressure plus calculated skin friction) is approximately equal for configurations with the same closure ratio. Also, for configurations with the same closure ratio, increasing fineness ratio results in an increased drag-rise Mach number; and for configurations with the same fineness ratio, increasing closure ratio results in an increased drag-rise Mach number.

Reubush, D. E.↗

Solar Coronal Jets: Observations, Theory, and Modeling

Coronal jets represent important manifestations of ubiquitous solar transients, which may be the source of significant mass and energy input to the upper solar atmosphere and the solar wind. While the energy involved in a jet-like event is smaller than that of "nominal" solar flares and coronal mass ejections (CMEs), jets share many common properties with these phenomena, in particular, the explosive magnetically driven dynamics. Studies of jets could, therefore, provide critical insight for understanding the larger, more complex drivers of the solar activity. On the other side of the size-spectrum, the study of jets could also supply important clues on the physics of transients close or at the limit of the current spatial resolution such as spicules. Furthermore, jet phenomena may hint to basic process for heating the corona and accelerating the solar wind; consequently their study gives us the opportunity to attack a broad range of solar-heliospheric problems.

Raouafi, N. E.↗

Observable Emission Features of Black Hole GRMHD Jets on Event Horizon Scales

The general-relativistic magnetohydrodynamical (GRMHD) formulation for black hole-powered jets naturally gives rise to a stagnation surface, where inflows and outflows along magnetic field lines that thread the black hole event horizon originate. We derive a conservative formulation for the transport of energetic electrons, which are initially injected at the stagnation surface and subsequently transported along flow streamlines. With this formulation the energy spectra evolution of the electrons along the flow in the presence of radiative and adiabatic cooling is determined. For flows regulated by synchrotron radiative losses and adiabatic cooling, the effective radio emission region is found to be finite, and geometrically it is more extended along the jet central axis. Moreover, the emission from regions adjacent to the stagnation surface is expected to be the most luminous as this is where the freshly injected energetic electrons are concentrated. An observable stagnation surface is thus a strong prediction of the GRMHD jet model with the prescribed non-thermal electron injection. Future millimeter/submillimeter (mm/sub-mm) very-long-baseline interferometric observations of supermassive black hole candidates, such as the one at the center of M87, can verify this GRMHD jet model and its associated non-thermal electron injection mechanism.

79 ASTRONOMY AND ASTROPHYSICS↗

Investigations of the 0.020-scale 88-OTS Integrated Space Shuttle Vehicle Jet-Plume Model in the NASA/Ames Research Center 11 by11-Foot Unitary Plan Wind Tunnel (IA80)

The results are documented of jet plume effects wind tunnel test of the 0.020-scale 88-OTS launch configuration space shuttle vehicle model in the 11 x 11 foot leg of the NASA/Ames Research Center Unitary Plan Wind Tunnel. This test involved cold gas main propulsion system (MPS) and solid rocket motor (SRB) plume simulations at Mach numbers from 0.6 to 1.4. Integrated vehicle surface pressure distributions, elevon and rudder hinge moments, and wing and vertical tail root bending and torsional moments due to MPS and SRB plume interactions were determined. Nozzle power conditions were controlled per pretest nozzle calibrations. Model angle of attack was varied from -4 deg to +4 deg; model angle of sideslip was varied from -4 deg to +4 deg. Reynolds number was varied for certain test conditions and configurations, with the nominal freestream total pressure being 14.69 psia. Plotted force and pressure data are presented.

Nichols, M. E.↗

On modeling dilution jet flowfields

This paper compares temperature field measurements from selected experiments on a single row, and opposed rows, of jets injected into a ducted crossflow with profiles calculated using an empirical model based on assumed vertical profile similarity and superposition, and distributions calculated with a 3-D elliptic code using a standard K-E turbulence model. The empirical model predictions are very good within the range of the generating experiments, and the numerical model resultings, although exhibiting too little mixing, correctly describe the effects of the principal flow and geometric variables.

Holdeman, J. D.↗

On modeling dilution jet flowfields

This paper compares temperature field measurements from selected experiments on a single row, and opposed rows, of jets injected into a ducted crossflow with profiles calculated using an empirical model based on assumed vertical profile similarity and superposition, and distributions calculated with a 3-D elliptic code using a standard K-E turbulence model. The empirical model predictions are very good within the range of the generating experiments, and the numerical model results, although exhibiting too little mixing, correctly describe the effects of the principal flow and geometric variables.

Holdeman, J. D.↗

Coordinated multifrequency observations of the BL Lacertae objects Mrk 180 and Mrk 501

The continuous spectra of the nearby BL Lac objects Mrk 180 and Mrk 501 have been investigated by making coordinated observations at X-ray, ultraviolet, optical, and radio wavelengths. The observations were planned in order to obtain single-epoch snapshots, or time-frozen spectra, of the emission at many different wavelengths. The spectra were fitted with spherically symmetric, synchrotron self-Compton models and relativistic jet models with relaxed assumptions of spherical geometry and homogeneity and allowance for relativistic motion. It is found that these models provide accurate fits to the observed spectra and tighter constraints on the physical parameters. These models are also not dependent on uncertain source size and synchrotron break frequency.

Mufson, S. L.↗

Potential flow theory and operation guide for the panel code PMARC

The theoretical basis for PMARC, a low-order potential-flow panel code for modeling complex three-dimensional geometries, is outlined. Several of the advanced features currently included in the code, such as internal flow modeling, a simple jet model, and a time-stepping wake model, are discussed in some detail. The code is written using adjustable size arrays so that it can be easily redimensioned for the size problem being solved and the computer hardware being used. An overview of the program input is presented, with a detailed description of the input available in the appendices. Finally, PMARC results for a generic wing/body configuration are compared with experimental data to demonstrate the accuracy of the code. The input file for this test case is given in the appendices.

Ashby, Dale L.↗

Experimentation and Modeling of Jet A Thermal Stability in a Heated Tube

High performance aircraft typically use hydrocarbon fuel to regeneratively cool the airframe and engine components. As the coolant temperatures increase, the fuel may react with dissolved oxygen forming deposits that limit the regenerative cooling system performance. This study investigates the deposition of Jet A using a thermal stability experiment and computational fluid dynamics (CFD) modeling. The experimental portion of this study is performed with a high Reynolds number thermal stability (HiRets) tester in which fuel passes though an electrically heated tube and the fuel outlet temperature is held constant. If the thermal stability temperature of the fuel is exceeded, deposits form and adhere to the inside of the tube creating an insulating layer between the tube and the fuel. The HiRets tester measures the tube outer wall temperatures near the fuel outlet to report the effect of deposition occurring inside the tube. Final deposits are also estimated with a carbon burn off analysis. The CFD model was developed and used to simulate the fluid dynamics, heat transfer, chemistry, and transport of the deposit precursors. The model is calibrated to the experiment temperature results and carbon burn-off deposition results. The model results show that the dominant factor in deposition is the heated wall temperature and that most of the deposits are formed in the laminar sublayer. The models predicted a 7.0E-6 kilograms per square meter-sec deposition rate, which compared well to the carbon burn-off analysis deposition rate of 1.0E-6 kilograms per square meter-sec.

Khodabandeh, Julia W.↗

MODELING THE JET KINEMATICS OF THE BLACK HOLE MICROQUASAR XTE J1550-564: A CONSTRAINT ON SPIN-ORBIT ALIGNMENT

Measurements of black hole spin made using the continuum-fitting method rely on the assumption that the inclination of the black hole's spin axis to our line of sight is the same as the orbital inclination angle i of the host binary system. The X-ray and radio jet data available for the microquasar XTE J1550-564 offer a rare opportunity to test this assumption. Following the work of others, we have modeled these data and thereby determined the inclination angle {theta} of the jet axis, which is presumed to be aligned with the black hole's spin axis. We find {theta} Almost-Equal-To 71 Degree-Sign and place an upper limit on the difference between the spin and orbital inclinations of |{theta} - i| < 12 Degree-Sign (90% confidence). Our measurement tests for misalignment along the line of sight while providing no constraint perpendicular to this plane. Our constraint on the misalignment angle supports the prediction that the spinning black hole in XTE J1550-564 has aligned itself with the orbital plane and provides support for the measurement of its spin via the continuum-fitting method. Our conclusions are based on a simple and reasonable model of a pair of symmetric jets propagating into a low-density cavity whose western wall is Almost-Equal-To 20% closer to XTE J1550-564 than its eastern wall.

79 ASTRONOMY AND ASTROPHYSICS↗

Forward modeling of JET polarimetry diagnostic

An analytical Bayesian inversion of the JET interferometry line integrated densities into density profiles and associated uncertainty information, is demonstrated. These are used, with a detailed model of plasma polarimetry, to predict the rotation and ellipticity for the JET polarimeter. This includes the lateral channels, for over 45,000 time points over 1313 JET pulses. Good agreement with measured values is shown for a number of channels. For the remaining channels, the requirement of a more detailed model of the diagnostic is demonstrated. A commonly used approximation for the Cotton-Mouton effect on the lateral channels is also evaluated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗