Search NASA⌕ Search

SEARCH · Search NASA

Results for “LAOS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Layering, melting, and recrystallization of a close-packed micellar crystal under steady and large-amplitude oscillatory shear flows

The rheology and three-dimensional microstructure of a concentrated viscoelastic solution of the triblock copolymer poly(ethylene oxide){sub 106}-poly(propylene oxide){sub 68}-poly(ethylene oxide){sub 106} (Pluronic F127) in the protic ionic liquid ethylammonium nitrate are measured by small angle neutron scattering (SANS) under flow in three orthogonal planes. This solution's shear-thinning viscosity is due to the formation of two-dimensional hexagonal close-packed (HCP) sliding layer structure. Shear-melting of the crystalline structure is observed without disruption of the self-assembled micelles, resulting in a change in flow properties. Spatially resolved measurements in the 1–2 plane reveal that both shear-melting and sliding are not uniform across the Couette gap. Melting and recrystallization of the HCP layers occur cyclically during a single large amplitude oscillatory shear (LAOS) cycle, in agreement with the “stick-slip” flow mechanism proposed by Hamley et al. [Phys. Rev. E 58, 7620–7628 (1998)]. Analysis of 3D “structural” Lissajous curves show that the cyclic melting and sliding are direct functions of the strain rate amplitude and show perfect correlation with the cyclic stress response during LAOS. Both viscosity and structural order obey the Delaware–Rutgers rule. Combining rheology with in situ spatiotemporally resolved SANS is demonstrated to elucidate the structural origins of the nonlinear rheology of complex fluids.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Understanding the transient large amplitude oscillatory shear behavior of yield stress fluids

A full understanding of the sequence of processes exhibited by yield stress fluids under large amplitude oscillatory shearing is developed using multiple experimental and analytical approaches. A novel component rate Lissajous curve, where the rates at which strain is acquired unrecoverably and recoverably are plotted against each other, is introduced and its utility is demonstrated by application to the analytical responses of four simple viscoelastic models. Using the component rate space, yielding and unyielding are identified by changes in the way strain is acquired, from recoverably to unrecoverably and back again. The behaviors are investigated by comparing the experimental results with predictions from the elastic Bingham model that is constructed using the Oldroyd–Prager formalism and the recently proposed continuous model by Kamani, Donley, and Rogers in which yielding is enhanced by rapid acquisition of elastic strain. The physical interpretation gained from the transient large amplitude oscillatory shear (LAOS) data is compared to the results from the analytical sequence of physical processes framework and a novel time-resolved Pipkin space. The component rate figures, therefore, provide an independent test of the interpretations of the sequence of physical processes analysis that can also be applied to other LAOS analysis frameworks. Each of these methods, the component rates, the sequence of physical processes analysis, and the time-resolved Pipkin diagrams, unambigiously identifies the same material physics, showing that yield stress fluids go through a sequence of physical processes that includes elastic deformation, gradual yielding, plastic flow, and gradual unyielding.

Kamani, Krutarth M. (ORCID:0000000338975420)↗

Local Anodic Oxidation of Thin GeO Films and Formation of Nanostructures Based on Them

The process of local anodic oxidation of thin GeO films has been studied using an atomic force microscope. The electron-probe microanalysis showed that oxidized areas of a GeO film were germanium dioxide. The effect of the voltage pulse duration applied to the probe–substrate system and the atmospheric humidity on the height of the oxide structures has been studied. The kinetics of the local anodic oxidation (LAO) in a semi-contact mode obeys the Cabrera–Mott model for large times. The initial growth rate of the oxide (R{sub 0}) significantly increases and the time of starting the oxidation (t{sub 0}) decreases as the atmospheric humidity increases by 20%, which is related to an increase in the concentration of oxygen-containing ions at the surface of the oxidized GeO film. It was shown that nanostructures in thin GeO layers can be formed by the LAO method.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Stabilizing new bismuth compounds in thin film form [Stabilizing new thin film materials in bismuth compounds]

Growth of unexpected phases from a composite target of BiFeO 3 :BiMnO 3 and/or BiFeO 3 :BiCrO 3 has been explored using pulsed laser deposition. The Bi 2 FeMnO 6 tetragonal phase can be grown directly on SrTiO 3 (STO) substrate, while two phases (S1 and S2) were found to grow on LaAlO 3 (LAO) substrates with narrow growth windows. However, introducing a thin CeO 2 buffer layer effectively broadens the growth window for the pure S1 phase, regardless of the substrate. Moreover, we discovered two new phases (X1 and X2) when growing on STO substrates using a BiFeO 3 :BiCrO 3 target. Pure X2 phase can be obtained on CeO 2 -buffered STO and LAO substrates. This work demonstrates that some unexpected phases can be stabilized in a thin film form by using composite perovskite BiRO 3 (R = Cr, Mn, Fe, Co, Ni) targets. Moreover, it also indicates that CeO 2 can serve as a general template for the growth of bismuth compounds with potential room-temperature multiferroicity.

36 MATERIALS SCIENCE↗

Materials Data on LaCoPO by Materials Project

LaCoPO is Parent of FeAs superconductors structured and crystallizes in the tetragonal P4/nmm space group. The structure is two-dimensional and consists of one CoP sheet oriented in the (0, 0, 1) direction and one LaO sheet oriented in the (0, 0, 1) direction. In the CoP sheet, Co2+ is bonded to four equivalent P3- atoms to form a mixture of distorted edge and corner-sharing CoP4 tetrahedra. All Co–P bond lengths are 2.22 Å. P3- is bonded in a 4-coordinate geometry to four equivalent Co2+ atoms. In the LaO sheet, La3+ is bonded in a 4-coordinate geometry to four equivalent O2- atoms. All La–O bond lengths are 2.36 Å. O2- is bonded to four equivalent La3+ atoms to form a mixture of edge and corner-sharing OLa4 tetrahedra.

36 MATERIALS SCIENCE↗

Materials Data on LaCuSeO by Materials Project

LaCuOSe is Parent of FeAs superconductors structured and crystallizes in the tetragonal P4/nmm space group. The structure is two-dimensional and consists of one CuSe sheet oriented in the (0, 0, 1) direction and one LaO sheet oriented in the (0, 0, 1) direction. In the CuSe sheet, Cu1+ is bonded to four equivalent Se2- atoms to form a mixture of corner and edge-sharing CuSe4 tetrahedra. All Cu–Se bond lengths are 2.52 Å. Se2- is bonded in a 4-coordinate geometry to four equivalent Cu1+ atoms. In the LaO sheet, La3+ is bonded in a 4-coordinate geometry to four equivalent O2- atoms. All La–O bond lengths are 2.38 Å. O2- is bonded to four equivalent La3+ atoms to form a mixture of corner and edge-sharing OLa4 tetrahedra.

36 MATERIALS SCIENCE↗

Materials Data on Li25Ca5La7Nb8O48 by Materials Project

Li25Ca4La6Nb8O46CaOLaO crystallizes in the triclinic P1 space group. The structure is three-dimensional and consists of one calcium oxide molecule, one LaO cluster, and one Li25Ca4La6Nb8O46 framework. In the LaO cluster, La is bonded in a 1-coordinate geometry to one O atom. The La–O bond length is 1.61 Å. O is bonded in a single-bond geometry to one La atom. In the Li25Ca4La6Nb8O46 framework, there are twenty-five inequivalent Li sites. In the first Li site, Li is bonded in a 1-coordinate geometry to two O atoms. There is one shorter (1.46 Å) and one longer (1.96 Å) Li–O bond length. In the second Li site, Li is bonded in a 2-coordinate geometry to two O atoms. There is one shorter (1.83 Å) and one longer (1.91 Å) Li–O bond length. In the third Li site, Li is bonded in a distorted L-shaped geometry to two O atoms. There is one shorter (1.71 Å) and one longer (2.05 Å) Li–O bond length. In the fourth Li site, Li is bonded in a 1-coordinate geometry to five O atoms. There are a spread of Li–O bond distances ranging from 2.03–2.55 Å. In the fifth Li site, Li is bonded in a 2-coordinate geometry to two O atoms. There is one shorter (1.43 Å) and one longer (1.64 Å) Li–O bond length. In the sixth Li site, Li is bonded in a distorted single-bond geometry to two O atoms. There is one shorter (1.36 Å) and one longer (2.08 Å) Li–O bond length. In the seventh Li site, Li is bonded in a distorted single-bond geometry to two O atoms. There is one shorter (1.38 Å) and one longer (2.37 Å) Li–O bond length. In the eighth Li site, Li is bonded in a 2-coordinate geometry to two O atoms. There is one shorter (1.66 Å) and one longer (1.92 Å) Li–O bond length. In the ninth Li site, Li is bonded in a 2-coordinate geometry to one Li, one Nb, and three O atoms. The Li–Li bond length is 1.75 Å. The Li–Nb bond length is 2.10 Å. There are a spread of Li–O bond distances ranging from 2.13–2.61 Å. In the tenth Li site, Li is bonded in a distorted single-bond geometry to one Li and one O atom. The Li–Li bond length is 1.45 Å. The Li–O bond length is 1.94 Å. In the eleventh Li site, Li is bonded in a 2-coordinate geometry to one Nb and two O atoms. The Li–Nb bond length is 2.62 Å. There are one shorter (2.13 Å) and one longer (2.35 Å) Li–O bond lengths. In the twelfth Li site, Li is bonded in a single-bond geometry to one O atom. The Li–O bond length is 1.59 Å. In the thirteenth Li site, Li is bonded in a distorted single-bond geometry to one Li and three O atoms. There are a spread of Li–O bond distances ranging from 1.65–2.44 Å. In the fourteenth Li site, Li is bonded in a 2-coordinate geometry to one Li and three O atoms. There are a spread of Li–O bond distances ranging from 1.88–2.08 Å. In the fifteenth Li site, Li is bonded in a single-bond geometry to two O atoms. There is one shorter (1.10 Å) and one longer (2.43 Å) Li–O bond length. In the sixteenth Li site, Li is bonded in a 1-coordinate geometry to one Nb and three O atoms. The Li–Nb bond length is 1.94 Å. There are a spread of Li–O bond distances ranging from 1.69–2.26 Å. In the seventeenth Li site, Li is bonded in a 3-coordinate geometry to three O atoms. There are a spread of Li–O bond distances ranging from 1.61–2.14 Å. In the eighteenth Li site, Li is bonded in a 1-coordinate geometry to one Nb and three O atoms. The Li–Nb bond length is 1.69 Å. There are a spread of Li–O bond distances ranging from 1.14–2.26 Å. In the nineteenth Li site, Li is bonded in a 1-coordinate geometry to four O atoms. There are a spread of Li–O bond distances ranging from 1.76–2.61 Å. In the twentieth Li site, Li is bonded in a distorted L-shaped geometry to three O atoms. There are a spread of Li–O bond distances ranging from 1.46–2.41 Å. In the twenty-first Li site, Li is bonded in a single-bond geometry to one O atom. The Li–O bond length is 1.14 Å. In the twenty-second Li site, Li is bonded in a distorted L-shaped geometry to three O atoms. There are a spread of Li–O bond distances ranging from 1.54–2.67 Å. In the twenty-third Li site, Li is bonded in a distorted single-bond geometry to three O atoms. There are a spread of Li–O bond distances ranging from 1.83–2.49 Å. In the twenty-fourth Li site, Li is bonded in a single-bond geometry to two O atoms. There is one shorter (1.22 Å) and one longer (2.51 Å) Li–O bond length. In the twenty-fifth Li site, Li is bonded in a 2-coordinate geometry to two O atoms. There are one shorter (2.18 Å) and one longer (2.40 Å) Li–O bond lengths. There are four inequivalent Ca sites. In the first Ca site, Ca is bonded in a 2-coordinate geometry to one Nb and four O atoms. The Ca–Nb bond length is 2.34 Å. There are a spread of Ca–O bond distances ranging from 2.38–2.78 Å. In the second Ca site, Ca is bonded in a distorted bent 120 degrees geometry to three O atoms. There are a spread of Ca–O bond distances ranging from 1.84–2.49 Å. In the third Ca site, Ca is bonded in a 3-coordinate geometry to three O atoms. There are a spread of Ca–O bond distances ranging from 1.92–2.47 Å. In the fourth Ca site, Ca is bonded in a 1-coordinate geometry to one Nb and five O atoms. The Ca–Nb bond length is 2.57 Å. There are a spread of Ca–O bond distances ranging from 1.99–2.95 Å. There are six inequivalent La sites. In the first La site, La is bonded in a 2-coordinate geometry to three O atoms. There are a spread of La–O bond distances ranging from 1.83–3.05 Å. In the second La site, La is bonded in a 5-coordinate geometry to one La, one Nb, and seven O atoms. The La–La bond length is 2.32 Å. The La–Nb bond length is 2.37 Å. There are a spread of La–O bond distances ranging from 2.36–3.21 Å. In the third La site, La is bonded in a bent 120 degrees geometry to two O atoms. There is one shorter (1.52 Å) and one longer (1.61 Å) La–O bond length. In the fourth La site, La is bonded in a 3-coordinate geometry to three O atoms. There are a spread of La–O bond distances ranging from 2.02–2.42 Å. In the fifth La site, La is bonded in a linear geometry to two O atoms. There is one shorter (1.47 Å) and one longer (1.67 Å) La–O bond length. In the sixth La site, La is bonded in a 1-coordinate geometry to one La and four O atoms. There are a spread of La–O bond distances ranging from 2.22–2.72 Å. There are eight inequivalent Nb sites. In the first Nb site, Nb is bonded in a 1-coordinate geometry to one Li and one O atom. The Nb–O bond length is 1.85 Å. In the second Nb site, Nb is bonded in a distorted bent 150 degrees geometry to two O atoms. There is one shorter (1.05 Å) and one longer (1.44 Å) Nb–O bond length. In the third Nb site, Nb is bonded in a 2-coordinate geometry to one Li, one Ca, and three O atoms. There are a spread of Nb–O bond distances ranging from 2.05–2.81 Å. In the fourth Nb site, Nb is bonded in a 7-coordinate geometry to one Li, one Ca, one La, and four O atoms. There are a spread of Nb–O bond distances ranging from 2.15–2.58 Å. In the fifth Nb site, Nb is bonded in a 1-coordinate geometry to three O atoms. There are a spread of Nb–O bond distances ranging from 1.45–2.13 Å. In the sixth Nb site, Nb is bonded in a linear geometry to three O atoms. There are a spread of Nb–O bond distances ranging from 1.12–2.44 Å. In the seventh Nb site, Nb is bonded in a 7-coordinate geometry to one Li and three O atoms. There are a spread of Nb–O bond distances ranging from 2.24–2.70 Å. In the eighth Nb site, Nb is bonded in a 2-coordinate geometry to two O atoms. There is one shorter (1.40 Å) and one longer (1.79 Å) Nb–O bond length. There are forty-six inequivalent O sites. In the first O site, O is bonded in a 1-coordinate geometry to two Li and one La atom. In the second O site, O is bonded in a 2-coordinate geometry to two Li and one La atom. In the third O site, O is bonded in a 1-coordinate geometry to one Li and one Nb atom. In the fourth O site, O is bonded in a distorted single-bond geometry to one Li and one La atom. In the fifth O site, O is bonded in a distorted single-bond geometry to two Li atoms. In the sixth O site, O is bonded in a 1-coordinate geometry to two Li atoms. In the seventh O site, O is bonded in a 1-coordinate geometry to one Li, one Ca, one La, two Nb, and two O atoms. There is one shorter (1.56 Å) and one longer (2.06 Å) O–O bond length. In the eighth O site, O is bonded in a 1-coordinate geometry to one Li, one La, and one Nb atom. In the ninth O site, O is bonded in a 1-coordinate geometry to one La and one Nb atom. In the tenth O site, O is bonded in a distorted bent 150 degrees geometry to one Li and one La atom. In the eleventh O site, O is bonded in a distorted single-bond geometry to one Li, one Ca, and one La atom. In the twelfth O site, O is bonded in a 1-coordinate geometry to one Li, one Ca, and one Nb atom. In the thirteenth O site, O is bonded in a distorted single-bond geometry to one Li atom. In the fourteenth O site, O is bonded in a 1-coordinate geometry to three Li atoms. In the fifteenth O site, O is bonded in a 1-coordinate geometry to one Li and one La atom. In the sixteenth O site, O is bonded in a distorted bent 120 degrees geometry to one La and one Nb atom. In the seventeenth O site, O is bonded in a water-like geometry to one Li and one Nb atom. In the eighteenth O site, O is bonded in a 2-coordinate geometry to one Li and one La atom. In the nineteenth O site, O is bonded in a distorted single-bond geometry to one Ca and one La atom. In the twentieth O site, O is bonded in a 2-coordinate geometry to one Li, one La, one Nb, and one O atom. In the twenty-first O site, O is bonded in a 4-coordinate geometry to three Li and one Nb atom. In the twenty-second O site, O is bonded in a single-bond geometry to one Li and one Ca atom. In the twenty-third O site, O is bonded in a distorted single-bond geometry to two Li and one Nb atom. In the twenty-fourth O site, O is bonded in a bent 120 degrees geometry to one Li and one Nb atom. In the twenty-fifth O site, O is bonded in a distorted T-shaped geometry to two Li and one Nb atom. In the twenty-sixth O site, O is bonded in a 3-coordinate geometry to one Li, one Ca, one La, and one Nb atom. In the twenty-seventh O site, O is bonded in a distorted L-shaped geometry to one Li and one La atom. In the twenty-eighth O site, O is bonded in a 2-coordinate geometry to two Li and one O atom. The O–O bond length is 1.82 Å. In the twenty-ninth O site, O is bonded in a 2-coordinate geometry to three Li and one Ca atom. In the thirtieth O site, O is bonded in a distorted bent 120 degrees geometry to one Li and one La atom. In the thirty-first O site, O is bonded in a 2-coordinate geometry to one Li and one Nb atom. In the thirty-second O site, O is bonded in a 2-coordinate geometry to one Li and one Ca atom. In the thirty-third O site, O is bonded in a 1-coordinate geometry to one Ca and one O atom. The O–O bond length is 1.86 Å. In the thirty-fourth O site, O is bonded in a 1-coordinate geometry to two Li atoms. In the thirty-fifth O site, O is bonded in a distorted water-like geometry to two Li and one Nb atom. In the thirty-sixth O site, O is bonded in a distorted single-bond geometry to one Li, one La, and one Nb atom. In the thirty-seventh O site, O is bonded in a distorted single-bond geometry to one Ca and two La atoms. In the thirty-eighth O site, O is bonded in a 6-coordinate geometry to three Li, one Ca, one Nb, and one O atom. In the thirty-ninth O site, O is bonded in a single-bond geometry to one Li atom. In the fortieth O site, O is bonded in a single-bond geometry to one La atom. In the forty-first O site, O is bonded in a single-bond geometry to one Li and one La atom. In the forty-second O site, O is bonded in a 2-coordinate geometry to three Li, one Ca, one Nb, and two O atoms. In the forty-third O site, O is bonded in a distorted water-like geometry to two Li atoms. In the forty-fourth O site, O is bonded in a 4-coordinate geometry to two Li, one Ca, and one Nb atom. In the forty-fifth O site, O is bonded in a 3-coordinate geometry to one L

36 MATERIALS SCIENCE↗

Materials Data on LaNO4 by Materials Project

LaONO3 crystallizes in the orthorhombic Pnma space group. The structure is one-dimensional and consists of four nitric acid molecules and two LaO ribbons oriented in the (0, 1, 0) direction. In each LaO ribbon, La3+ is bonded in a 2-coordinate geometry to two equivalent O2- atoms. There are one shorter (2.13 Å) and one longer (2.16 Å) La–O bond lengths. O2- is bonded in a distorted bent 150 degrees geometry to two equivalent La3+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on LaNiPO by Materials Project

LaNiPO is lead oxide-derived structured and crystallizes in the tetragonal P4/nmm space group. The structure is two-dimensional and consists of one LaO sheet oriented in the (0, 0, 1) direction and one NiP sheet oriented in the (0, 0, 1) direction. In the LaO sheet, La3+ is bonded in a 4-coordinate geometry to four equivalent O2- atoms. All La–O bond lengths are 2.38 Å. O2- is bonded to four equivalent La3+ atoms to form a mixture of edge and corner-sharing OLa4 tetrahedra. In the NiP sheet, Ni2+ is bonded to four equivalent P3- atoms to form a mixture of distorted edge and corner-sharing NiP4 trigonal pyramids. All Ni–P bond lengths are 2.24 Å. P3- is bonded in a 4-coordinate geometry to four equivalent Ni2+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on LaNiAsO by Materials Project

LaNiAsO is lead oxide-derived structured and crystallizes in the tetragonal P4/nmm space group. The structure is two-dimensional and consists of one LaO sheet oriented in the (0, 0, 1) direction and one NiAs sheet oriented in the (0, 0, 1) direction. In the LaO sheet, La3+ is bonded in a 4-coordinate geometry to four equivalent O2- atoms. All La–O bond lengths are 2.40 Å. O2- is bonded to four equivalent La3+ atoms to form a mixture of edge and corner-sharing OLa4 tetrahedra. In the NiAs sheet, Ni2+ is bonded to four equivalent As3- atoms to form a mixture of distorted edge and corner-sharing NiAs4 tetrahedra. All Ni–As bond lengths are 2.33 Å. As3- is bonded in a 4-coordinate geometry to four equivalent Ni2+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on LaCoAsO by Materials Project

LaOCoAs is Parent of FeAs superconductors structured and crystallizes in the tetragonal P4/nmm space group. The structure is two-dimensional and consists of one CoAs sheet oriented in the (0, 0, 1) direction and one LaO sheet oriented in the (0, 0, 1) direction. In the CoAs sheet, Co2+ is bonded to four equivalent As3- atoms to form a mixture of corner and edge-sharing CoAs4 tetrahedra. All Co–As bond lengths are 2.32 Å. As3- is bonded in a 4-coordinate geometry to four equivalent Co2+ atoms. In the LaO sheet, La3+ is bonded in a 4-coordinate geometry to four equivalent O2- atoms. All La–O bond lengths are 2.39 Å. O2- is bonded to four equivalent La3+ atoms to form a mixture of corner and edge-sharing OLa4 tetrahedra.

36 MATERIALS SCIENCE↗

Materials Data on La3Ni4(P2O)2 by Materials Project

La3Ni4P4O2 crystallizes in the tetragonal I4/mmm space group. The structure is two-dimensional and consists of two La(NiP)4 sheets oriented in the (0, 0, 1) direction and two LaO sheets oriented in the (0, 0, 1) direction. In each La(NiP)4 sheet, La3+ is bonded in a distorted body-centered cubic geometry to eight equivalent P3- atoms. All La–P bond lengths are 3.12 Å. Ni+1.75+ is bonded to four P3- atoms to form a mixture of edge and corner-sharing NiP4 tetrahedra. There are two shorter (2.24 Å) and two longer (2.29 Å) Ni–P bond lengths. There are two inequivalent P3- sites. In the first P3- site, P3- is bonded in a 9-coordinate geometry to four equivalent La3+, four equivalent Ni+1.75+, and one P3- atom. The P–P bond length is 2.61 Å. In the second P3- site, P3- is bonded in a 4-coordinate geometry to four equivalent Ni+1.75+ atoms. In each LaO sheet, La3+ is bonded in a 4-coordinate geometry to four equivalent O2- atoms. All La–O bond lengths are 2.36 Å. O2- is bonded to four equivalent La3+ atoms to form a mixture of edge and corner-sharing OLa4 tetrahedra.

36 MATERIALS SCIENCE↗

Materials Data on LiLaSO by Materials Project

LiSLaO is Parent of FeAs superconductors structured and crystallizes in the tetragonal P4/nmm space group. The structure is two-dimensional and consists of one LaO sheet oriented in the (0, 0, 1) direction and one LiS sheet oriented in the (0, 0, 1) direction. In the LaO sheet, La3+ is bonded in a 4-coordinate geometry to four equivalent O2- atoms. All La–O bond lengths are 2.36 Å. O2- is bonded to four equivalent La3+ atoms to form a mixture of edge and corner-sharing OLa4 tetrahedra. In the LiS sheet, Li1+ is bonded to four equivalent S2- atoms to form a mixture of edge and corner-sharing LiS4 tetrahedra. All Li–S bond lengths are 2.46 Å. S2- is bonded in a 4-coordinate geometry to four equivalent Li1+ atoms.

36 MATERIALS SCIENCE↗

Land Cover Change Analysis and Spatial Variations in Southeast Asian Nations: Insights on Spatial Scale Dynamics

Land cover type is a fundamental aspect of studies using remote sensing for environmental analysis such as monitoring deforestation, quantifying wildland fire emissions, and more. There are many land cover products available for varying time periods and spatial resolutions, each with different land cover class definitions and number of land cover classes. These differences yield inherent variation in land cover estimates. In this study, we explore the spatial and areal variation between two major datasets for their commonly available time of 2018 to 2022 (MODIS 500m Land Cover and Esri Sentinel-2 10m land cover) in the continental Southeast Asia countries of Cambodia, Laos, Myanmar, Thailand, and Vietnam. To enable comparison, we resampled the datasets and reclassified the land cover classes to a common scheme. Major disagreement was detected between Esri and MODIS, especially for the wetlands/flooded vegetation class in which only 3.6% of pixels were in agreement. In addition to quantifying variation between the datasets, we quantify land cover change at the decadal scale of 2001, 2011, and 2021 for each country and identified province-level hotspots of land cover change. Cambodia experienced the highest rate of land cover change with 67.8% of total land area changed, followed by Vietnam (58.6%), Laos (50.2%), Myanmar (46.9%), and Thailand (46.3%). The highest rate of land cover change was detected in Odtar Mean Chey, Cambodia, which had large swaths of forest area cleared for agricultural production, river damming, and more. Ultimately, many areas in the region experienced forest clearing for crop production (i.e. rice) which appeared to be classified as wetland in the MODIS product, and crop in the Esri product. Myanmar was the only country which did not experience net decline in forest area over the 2001 to 2021 time period.

Land Cover Change↗

Influence of Joule Heating on the Stability of High Temperature Irradiation Resistant Thermocouples

Development of in-core instrumentation is driven by the pursuit of safer and more economic energy production from both existing nuclear reactors and Generation IV reactor designs. Idaho National Laboratory (INL) has developed high temperature irradiation resistant thermocouples (HTIR-TCs) for temperature sensing inside Generation IV nuclear reactors. These thermocouples are composed of phosphorus-doped niobium (Nb-P) and lanthana-doped molybdenum (Mo-LaO) thermoelements, an alumina (Al2O3) insulation, and a niobium sheath. HTIR-TCs require an initial heat treatment exceeding the maximum service temperature to stabilize the generated electromotive force (EMF) signal; however, the mechanism behind this stabilization is not well understood. This work evaluates the impact of Joule heating on the thermoelements' microstructures, chemical stability, and mechanical properties to determine the mechanisms by which the EMF signal stabilization occurs. Accordingly, during the Joule heat treatment, a secondary Nb3P phase coarsened along the length of the Nb-P thermoelement, along with the formation of an interaction region at the Al2O3/niobium interface. The interaction between the alumina insulation and the Nb-P thermoelement was also observed within the Mo-LaO thermoelement. Joule heating induced stability within the generated EMF signal of HTIR-TCs through the formation of secondary phases within the Nb-P and the interaction of the alumina insulation with the thermoelements.

46 - INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AN↗

Influence of Joule Heating on the Stability of High Temperature Irradiation-resistant Thermocouples

Development of in-core instrumentation is driven by the pursuit of safer, more economic energy production from the perspective of both existing nuclear reactors and Generation IV reactor designs. Idaho National Laboratory has developed high-temperature irradiation-resistant thermocouples (HTIR-TCs) for temperature sensing inside Generation IV nuclear reactors. These thermocouples are composed of phosphorus-doped niobium (Nb-P) and lanthana-doped molybdenum (Mo-LaO) thermoelements, an alumina (Al2O3) insulation, and a niobium sheath. HTIR-TCs require an initial heat treatment exceeding the maximum service temperature to stabilize the generated electromotive force (EMF) signal. The mechanism behind the stabilization of the HTIR-TCs through traditional heat treatment methods is understood; however, the traditional heat treatment method is expensive, time consuming, and results in a heterogeneous microstructure. Therefore, we investigated a rapid method for stabilization and microstructure homogeneity, through Joule heating. This work evaluates the impact of Joule heating on the thermoelements’ microstructures, chemical stability, and mechanical properties so as to determine the mechanisms by which stabilization of the EMF signal occurs. Accordingly, during the Joule heat treatment, a secondary Nb3P phase coarsened along the length of the Nb-P thermoelement, along with the formation of an interaction region at the Al2O3/niobium interface. The interaction between the alumina insulation and the Nb-P thermoelement was also observed within the Mo-LaO thermoelement. Joule heating induced stability within the generated HTIR-TC EMF signal via the formation of secondary phases within the Nb-P and the interaction between the alumina insulation and the thermoelements.

46 - INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AN↗

Comparative review of EIA in the Association of Southeast Asian Nations

Environmental sustainability is one of the frameworks for cooperation under the Declaration of ASEAN Concord II, 2015. Environmental Impact Assessment (EIA) has been recognized as a crucial tool. This paper proposes the review of EIA in ASEAN countries in three key areas, namely legal enforcement, implementation approach and EIA effectiveness as the basis for a sustainable approach. The results showed that almost all the countries established their EIAs at the legal level with the complete EIA process; however, the implementation was somewhat different depending on the unique characteristics of the EIA processes. Such unique characteristics can be divided into three groups. The first belongs to the countries that initiated the EIA process before 1990, although they have their own outstanding topography, namely, Thailand, Malaysia, Indonesia and the Philippines. The second group includes the countries that applied the EIA after 1990. The Asian Development Bank has played an active role and their EIA processes have rapidly developed especially EIA monitoring, Strategic Environmental Assessment (SEA) and Transboundary Impact Assessment. The countries in this group are Cambodia, Vietnam, Laos and Myanmar. The last group contains the countries with stringent environmental regulations and is becoming part of environmental laws. They include Singapore and Brunei. The tools to support the achievement of sustainability, such as ecosystem services, biodiversity offsets and transboundary impacts will be of prime importance to the ASEAN EIA in the future.

54 ENVIRONMENTAL SCIENCES↗

Probing surface and bulk electrochemical processes on the LaAlO3-SrTiO3 interface

Local electrochemical phenomena on the surfaces of LaAlO3-SrTiO3 heterostructure are explored using unipolar and bipolar dynamic electrochemical strain microscopy (D-ESM). The D-ESM suggests the presence of at least two distinct electrochemical processes, including fast reversible low-voltage process and slow high-voltage process. The latter process is associated with static surface deformations in the sub-nm regime. These behaviors are compared with Kelvin Probe Force Microscopy hysteresis data. The possible origins of observed phenomena are discussed and these studies suggest that charge-writing behavior in LAO-STO include strong surface/bulk electrochemical component and are more complicated than simple screening by surface adsorbates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗