SEARCH · Search NASA

Results for “LASER OUTPUT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

All sources NASA NTRS DOE OSTI

NASA NTRS1979

Large volume multiple-pass nuclear pumped laser

The paper describes research efforts at the Langley Research Center to study large volume, volumetric pumped laser systems and methods to extract lasing energy from these systems. Nuclear lasing has been achieved for a mixture of 800 torr He-3-Ar (1% Ar) with a peak thermal flux of 2.9 x 10 to the 16th n/sq cm-sec. Attention is given to the scaling of the multiple-pass box laser with increasing number of multiple passes and the scaling of laser output with path length.

Deyoung, R. J.↗

NASA NTRS1979

Nuclear pumped electronic transition laser studies

An experiment is proposed that should yield unambiguous absolute results on the production efficiency of rare gas excimers from fission fragments. Laser threshold efficiency is parameterized and calculations indicate that some lasers can be operated using relatively simple experimental apparatus adjacent to GODIVA. Operation of a KrF excimer laser adjacent to GODIVA appears to be possible, although the neutron pulse width is not well matched to the laser pulse duration. However, calculation indicates that KrF excimer laser output on the order of a joule may be possible.

Hughes, W. M.↗

NASA NTRS1980

Polar nephelometer for atmospheric particulate studies

A polar nephelometer for use in studying atmospheric aerosols was developed. The nephelometer detects molecular scatter from air and measures scattering from very clean air using pure molecular scattering for calibration. A compact system using a folded light path with an air cooled argon laser for the light source was designed. A small, sensitive detector unit permits easy angular rotation for changing the scattering angle. A narrow detector field of view of + or - 1/4 degree of scattering along with a single wavelength of incident light is used to minimize uncertainties in the scattering theory. The system is automated for data acquisition of the scattering matrix elements over an angular range from 2 degrees to 178 degrees of scattering. Both laser output and detector sensitivity are monitored to normalize the measured light scattering.

Hansen, M. Z.↗

NASA NTRS1980

Nuclear-pumped CW lasing of the He-Ne system

The gain for the 6328-A laser line for the nuclear excited He-Ne system has been measured to 300 Torr pressure at thermal neutron flux levels from 2 x 10 to the 7th to 1 x 10 to the 14th n/sq cm sec. In order to estimate small:signal gain, the gain was also measured as a function of input intensity. For demonstration of feasibility of CW operation of nuclear pumped lasers, a cavity was operated and lasing was observed. Although the laser output was small, it is concluded that lasing in a CW mode has been achieved with He-Ne using moderate neutron flux levels.

Carter, B. D.↗

NASA NTRS1979

A technique for evaluating the Jovian entry-probe heat-shield material with a gasdynamic laser

The paper presents a technique for evaluating the Jovian entry-probe heat-shield material with a gasdynamic laser. This entry probe of Project Galileo will incorporate a forebody heat shield of carbon phenolic ablative; at the expected peak radiant intensity of 42 kW/sq cm this material can be evaluated by a CO2 gasdynamic laser. The typically quasigaussian spatial distribution of the laser output beam is converted to a spatially uniform beam by a new optical integrator; the ablation results can be related to the imposed intensity and then to the flight situation with a uniform beam. The tests show that the carbon phenolic tends to spall under intense radiation, and this process is quantified by a particle capture technique.

Dickey, R. R.↗

NASA NTRS1980

Modeling of a solar-pumped iodine laser

The direct conversion in space of solar radiation into laser radiation for power transmission to earth, satellites, or deep space probes shows promise as a reasonably simple technology and may have cost advantage in deployment and greater reliability compared to other methods of space power generation and transmission. The main candidates for solar pumping are the gas dynamic, photochemical, and direct photoexcited lasers. Here consideration is given to the photochemical reaction of alkyliodides which predominantly excite the I(2P1/2) state which then lases at 1.315 microns. The iodine ground state is eventually lost to reconstituting the gas or in the formation of molecular iodine. The rates at which the gas is required to be recycled through the laser system are modest. The side exposure at 100-fold solar concentration of a 100-m long tube with a 1 sq m cross section is estimated to provide 20 kW of continuous laser output. Scaling laws and optimum operating conditions of this system are discussed.

Wilson, J. W.↗

NASA NTRS1981

Nuclear-pumped lasing of /He-3/-Xe at 2.63 microns

Direct nuclear pumping of an (He-3)-Xe laser, lasing at 2.63 microns, has been achieved. Scaling of the laser output with xenon concentration, total pressure, and thermal neutron flux has been investigated. A peak power in excess of 200 W was obtained at a total pressure of 3 atm, a gas mixture consisting of 5% xenon and 95% He-3, and a peak thermal flux of 6 x 10 to the 16th n/sq cm s.

Jalufka, N. W.↗

NASA NTRS1984

Measuring Delay in Lasers

Technique measures delay, i.e., response time of modulated diode laser as function of temperature by comparing excitation signal to laser output signal with vector voltmeter.

Bergman, L. A.↗

NASA NTRS1984

Blackbody pumped N2-CO2 transfer laser

The power and intrinsic efficiency of a small N2-CO2 fluid mixing transfer laser has been measured. Powers of 1.4 watts and intrinsic efficiencies for 0.7 percent were found for N2 oven temperatures of 1473 K. Laser output was optimized for He, CO2 and N2 partial pressures, output mirror reflectivity, nozzle diameter and oven temperature.

De Young, R. J.↗

NASA NTRS1983

Development of ion-implantation confined, shallow mesa stripe (Pn,Sn)Te/Pb(Te,Se) DH laser diodes

Preliminary results of a program to develop ion implantation confined, shallow mesa stripe (Pb,Sn)Te laser diodes are presented. The practicality of using a shallow mesa stripe to produce single mode laser output and to increase the single mode tuning range are demonstrated. The first results of p-type ion implantation in the lead-tin salts are also reported. It is shown that sodium and lithium both can be used to convert n-type Pb(Te,Se) to p-type. The implant and anneal procedures are described, and electrical characteristics of Li-implanted layers are presented.

Fonstad, C. G.↗

NASA NTRS1983

Determination of atmospheric backscatter at 10.6 microns

Profiles have been obtained for atmospheric aerosol backscatter coefficient versus altitude at four different geographical locations, by means of a 10.6-micron lidar that uses a CO2 laser. A Mach-Zehnder interferometer is used to separate the laser output beam into a measurement beam and a reference beam. The interferometer combines the reference beam with backscattered radiation collected by a telescope, and the combined beams are focused onto a cooled HgCdTe photodiode at the interferometer exit. Attention is given to the results of a backscatter study experiment flown aboard a NASA research aircraft.

Jones, W. D.↗

NASA NTRS1986

An all-purpose computer program for lidar simulations and reduction of lidar data

A general computer program was written for the dual purpose of simulating lidar returm signals and extracting H2O vapor and temperature (T) profiles from actual lidar returns. This program will be used to retrieve H2O vapor and T profiles from data obtained with the University of Maryland ground-based lidar systems. The program is designed to simulate and to analyze lidar returns from a monostatic system for two cases: when the output laser pulse is monochromatic, and when the pulse has a known wavelength spectrum. The simulation part of the program has several model H2O vapor, T, and aerosol profiles which can be combined to form different model atmospheres. The simulation program also permits the testing of different methods of numerical filtering to suppress noise, and testing the accuracy of different methods of numerical integration.

Braun, C.↗

NASA NTRS1988

Residual infrared absorption in Ti:Al2O3 crystals

The performance of Ti:Al2O3 lasers is impaired generally by an infrared absorption that occurs in the laser output wavelength region. On the basis of data for as-grown and annealed samples cut from Ti:Al2O3 crystals grown by the vertical-gradient-freeze (VGF) technique, we previously proposed that the residual absorption is due to Ti(3+) to Ti(4+) pairs. In this report, we present additional data that confirm this ion-pair model for the residual absorption, which can be attributed to excitation of the 3d electron of the Ti(3+) ion perturbed by the Coulomb field of the neighboring Ti(4+) ion and/or an associated Al vacancy.

Source record↗

NASA NTRS1988

Modeling of dynamic effects of a low power laser beam

Methods of modeling some of the dynamic effects involved in laser beam propagation through the atmosphere are addressed with emphasis on the development of simple but accurate models which are readily implemented in a physical optics code. A space relay system with a ground based laser facility is considered as an example. The modeling of such characteristic phenomena as laser output distribution, flat and curved mirrors, diffraction propagation, atmospheric effects (aberration and wind shear), adaptive mirrors, jitter, and time integration of power on target, is discussed.

Lawrence, George N.↗

NASA NTRS1989

2.07-micron CW diode-laser-pumped Tm,Ho:YLiF4 room-temperature

Continuous-wave action is obtained at 2.07 microns from a 2-mm-long Tm-sensitized Ho:YLiF4 crystal at room temperature when longitudinally pumped by a pair of diode-laser arrays. Laser output power at 300 K is 26 mW, with a 30-percent slope efficiency and a lasing threshold of 108 mW. A maximum output power of 187 mW is obtained from a 4-mm-long crystal at 77 K, with a 67 percent slope efficiency. A preliminary demonstration of cavity Q switching produced 165 microJ of pulse energy at a repetition rate of 100 Hz.

Hemmati, Hamid↗

NASA NTRS1989

A laser spectrometer and wavemeter for pulsed lasers

The design, construction, calibration, and evaluation of a pulsed laser wavemeter and spectral analyzer are described. This instrument, called the Laserscope for its oscilloscope-like display of laser spectral structure, was delivered to NASA Langley Research Center as a prototype of a laboratory instrument. The key component is a multibeam Fizeau wedge interferometer, providing high (0.2 pm) spectral resolution and a linear dispersion of spectral information, ideally suited to linear array photodiode detectors. Even operating alone, with the classic order-number ambiguity of interferometers unresolved, this optical element will provide a fast, real-time display of the spectral structure of a laser output. If precise wavelength information is also desired then additional stages must be provided to obtain a wavelength measurement within the order-number uncertainty, i.e., within the free spectral range of the Fizeau wedge interferometer. A Snyder (single-beam Fizeau) wedge is included to provide this initial wavelength measurement. Difficulties in achieving the required wide-spectrum calibration limit the usefulness of this function.

Mckay, J. A.↗

NASA NTRS1989

Architectural design of a ground-based deep-space optical reception antenna

An architectural design of a ground-based antenna (telescope) for receiving optical communications from deep space is presented. Physical and optical parameters, and their effect on the performance and cost considerations, are described. The channel capacity of the antenna is 100 kbits/s from Saturn and 5 Mbits/s from Mars. A novel sunshade is designed to permit optical communication even when the deep-space laser source is as close to the sun as 12 deg. Inserts in the tubes of the sunshade permit operations at solar elongations as small as 6 or 3 deg. The Nd:YAG source laser and the Fraunhofer filter (a narrow-band predetection optical filter) are tuned to match the Doppler shifts of the source and background. A typical Saturn-to-earth data link can reduce its source power requirement from 8.2 W to 2 W of laser output by employing a Fraunhofer filter instead of a conventional multilayer dielectric filter.

Kerr, E. L.↗

NASA NTRS1991

Acousto-optical Filter Can Rapidly Tune Solid-State Lasers

Incorporation of acousto-optical tunable filter (AOTF) in cavity of solid-state laser, provides means of adjusting wavelength of laser output electronically, according to recent proposal. Output wavelength randomly selected in microseconds. Technique useful in remote-sensing applications, such as in differential-absorption lidar (DIAL) and in communications for wavelength-division multiplexing.

Lambert, James L.↗