Search NASA⌕ Search

SEARCH · Search NASA

Results for “LIFT FAN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Theoretical and experimental investigation of the performance of a fan-in-wing VTOL configuration

The incompressible-flow momentum theory is extended to the case of lifting fans. The resulting theory includes many of the known experimentally determined characteristics of fan-in-wing aircraft. These characteristics include the negligible effect of forward speed on fan thrust, the large momentum drag, and the generally inefficient performance throughout the transition speed range. Although mutual interference between the fans and the wing was totally neglected, the theory is confirmed by experimental results for the configuration tested. Examination of the results of an investigation of wall interference leads to the conclusion that the large fan-induced lift reported in many earlier investigations was largely the result of neglecting wall interference in the reduction of wind-tunnel data.

Heyson, H. H.↗
NASA NTRS1976

Wind tunnel and ground static investigation of a large scale model of a lift/cruise fan V/STOL aircraft

An investigation was conducted in a 40 foot by 80 foot wind tunnel to determine the aerodynamic/propulsion characteristics of a large scale powered model of a lift/cruise fan V/STOL aircraft. The model was equipped with three 36 inch diameter turbotip X376B fans powered by three T58 gas generators. The lift fan was located forward of the cockpit area and the two lift/cruise fans were located on top of the wing adjacent to the fuselage. The three fans with associated thrust vectoring systems were used to provide vertical, and short, takeoff and landing capability. For conventional cruise mode operation, only the lift/cruise fans were utilized. The data that were obtained include lift, drag, longitudinal and lateral-directional stability characteristics, and control effectiveness. Data were obtained up to speeds of 120 knots at one model height of 20 feet for the conventional aerodynamic lift configuration and at several thrust vector angles for the powered lift configuration.

Source record↗
NASA NTRS1973

Preliminary study of an integral fan lift/cruise engine for a 100 passenger VTOL transport

A simplified mission analysis was performed to determine an optimum engine cycle for a 100-passenger VTOL transport with a range of 500 statute miles. The aircraft had a total of eight integral fan lift engines, three of which serve as cruise engines. Fan pressure ratio was varied from 1.2 to 1.3, overall pressure ratio from 7 to 13, and turbine inlet temperature from 2460 to 2860 R. Bypass ratio was selected to meet a 500-foot altitude flyover noise goal of 95 PNdB. Airplane gross weight and direct operating cost (DOC) were calculated. The lowest DOC of 1.82 cents per seat-mile was achieved with a fan pressure ratio of 1.3, overall pressure ratio of 12, and turbine inlet temperature of 2860 R.

Civinskas, K. C.↗
NASA NTRS1972

Reduction of fan noise: A concept

Acoustic materials strategically located within or near noise sources are effective for noise abatement on wing mounted lift fans, nozzles, engines and other noise sources. Panels are straightforward and easily adaptable to situations outside of aircraft technology.

Simonson, M. R.↗
NASA NTRS1972

Bonding titanium to Rene 41 alloy

Pair of intermediate materials joined by electron beam welding method welds titanium to Rene 41 alloy. Bond is necessary for combining into one structure high strength-to-density ratio titanium fan blades and temperature resistant nickel-base alloy turbine-buckets in VTOL aircraft lift-fan rotor.

Scott, R. W.↗
NASA NTRS1973

Effect of rotor design tip speed on noise of a 1.21 pressure ratio model fan under static conditions

Preliminary results are presented for a reverberant-field noise investigation of three fan stages designed for the same overall total pressure ratio of 1.21 at different rotor tip speeds (750, 900, and 1050 fps). The stages were tested statically in a 15-in.-dia model lift fan installed in a wing pod located in the test section of a wind tunnel. Although the fan stages produced essentially the same design pressure ratio, marked differences were observed in the variation of fan noise with fan operating speed. At design speed, the forward-radiated sound power level was approximately the same for the 750 and 900 fps stages. For the 1050 fps stage, the design-speed forward-radiated power level was about 7 dB higher due to the generation of multiple pure tone noise.

Loeffler, I. J.↗
NASA NTRS1973

Effect of rotor design tip speed on noise of a 1.21 pressure ratio model fan under static conditions

Preliminary results are presented for a reverberant-field noise investigation of three fan stages designed for the same overall total pressure ratio of 1.21 at different rotor tip speeds (750, 900, and 1050 ft/sec). The stages were tested statically in a 15-inch-diameter model lift fan installed in a wing pod located in the test section of a wind tunnel. Although the fan stages produced essentially the same design pressure ratio, marked differences were observed in the variation of fan noise with fan operating speed. At design speed, the forward-radiated sound power level was approximately the same for the 750 ft/sec and 900 ft/sec stages. For the 1050 ft/sec stage, the design-speed forward-radiated power level was about 7 db higher due to the generation of multiple pure tone noise.

Loeffler, I. J.↗
NASA NTRS1976

Ground test of the D shaped vented thrust vectoring nozzle

Static ground tests of a large scale lift/cruise thrust vectoring nozzle were conducted to establish: (1) vectoring performance 'in' and 'out' of ground effect; (2) thrust spoilage capability; (3) compatibility of the nozzle with a turbotip fan; and (4) the nozzle structural temperature distribution. Vectoring performance of a short coupled, vented nozzle design on a large scale, (60%) basis was compared with small scale (4.5%) test nozzle results. The test nozzle was a "boilerplate" model of the MCAIR "D" vented nozzle configured for operation with the LF336/J85 turbotip lift fan system. Calibration of the LF336/J85 test fan with a simple convergent nozzle was performed with four different nozzle exit areas to establish reference thrust, nozzle pressure ratio, and nozzle corrected flow characteristics for comparison with the thrust vectoring nozzle data. Thrust vectoring tests with the 'D' vented nozzle were conducted over the range of vector angles between 0 and 117 deg for several different nozzle exit areas.

Esker, D. W.↗
NASA NTRS1971

Operational procedure for computer program for design point characteristics of a compressed-air generator with through-flow combustor for V/STOL applications

The computer program described in this report calculates the design-point characteristics of a compressed-air generator for use in V/STOL applications such as systems with a tip-turbine-driven lift fan. The program computes the dimensions and mass, as well as the thermodynamic performance of a model air generator configuration which involves a straight through-flow combustor. Physical and thermodynamic characteristics of the air generator components are also given. The program was written in FORTRAN IV language. Provision has been made so that the program will accept input values in either SI units or U.S. customary units. Each air generator design-point calculation requires about 1.5 seconds of 7094 computer time for execution.

Krebs, R. P.↗
NASA NTRS1972

LF467 concept definition

The LF467 concept is discussed. The LF467 is an advanced turbotip lift fan intended for application with the YJ97-GE-100 turbojet gas generator on a V/STOL transport research aircraft. The program objective was to define a fan that develops a reasonably high (1.30) fan pressure ratio consistent with propulsion requirements of a V/STOL research transport aircraft and that exhibits the ability to achieve a 100 PNdE overall noise objective through the use of modest additional installation treatment. The aerodynamic and mechanical designs of this system and the resulting configuration, weight, and noise predictions are presented.

Source record↗
NASA NTRS1972

Design study of an air pump and integral lift engine ALF-504 using the Lycoming 502 core

Design studies were conducted for an integral lift fan engine utilizing the Lycoming 502 fan core with the final MQT power turbine. The fan is designed for a 12.5 bypass ratio and 1.25:1 pressure ratio, and provides supercharging for the core. Maximum sea level static thrust is 8370 pounds with a specific fuel consumption of 0.302 lb/hr-lb. The dry engine weight without starter is 1419 pounds including full-length duct and sound-attenuating rings. The engine envelope including duct treatment but not localized accessory protrusion is 53.25 inches in diameter and 59.2 inches long from exhaust nozzle exit to fan inlet flange. Detailed analyses include fan aerodynamics, fan and reduction gear mechanical design, fan dynamic analysis, engine noise analysis, engine performance, and weight analysis.

Rauch, D.↗
NASA NTRS1973

Calculation procedures for potential and viscous flow solutions for engine inlets

The method and basic elements of computer solutions for both potential flow and viscous flow calculations for engine inlets are described. The procedure is applicable to subsonic conventional (CTOL), short-haul (STOL), and vertical takeoff (VTOL) aircraft engine nacelles operating in a compressible viscous flow. The calculated results compare well with measured surface pressure distributions for a number of model inlets. The paper discusses the uses of the program in both the design and analysis of engine inlets, with several examples given for VTOL lift fans, acoustic splitters, and for STOL engine nacelles. Several test support applications are also given.

Albers, J. A.↗
NASA NTRS1973

Evaluation of V/STOL research aircraft design

The evaluation and evolution of direct jet lift V/STOL transport aircraft designs are discussed. The V/STOL transport design selected as an example is a lift-fan design that was evaluated as a candidate configuration for a possible future V/STOL research transport. The paper includes discussion of potential advanced V/STOL landing approach profiles as key design requirements for V/STOL aircraft, description and experimental results of an integrated propulsion/control system designed to achieve desired advanced V/STOL near-terminal operating capabilities, and results from evaluating V/STOL designs on piloted moving-base simulators. This paper discusses use of the piloted moving-base simulator as a design tool for evolving satisfactory V/STOL stabilization and propulsion/control systems. Included are problems and solutions identified during simulation of simultaneous decelerating/descent steep curved landing approaches under instrument flight conditions. Simulation results are also compared to flight results obtained with the DO-31 V/STOL research transport.

Deckert, W. H.↗
NASA NTRS1974

Calculation procedures for potential and viscous flow solutions for engine inlets

The method and basic elements of computer solutions for both potential flow and viscous flow calculations for engine inlets are described. The procedure is applicable to subsonic conventional, short-haul, and vertical takeoff aircraft engine nacelles operating in a compressible viscous flow. The calculated results compare well with measured surface-pressure distributions for a number of model inlets. The uses of the program in both the design and analysis of engine inlets are discussed, with several examples given for VTOL lift fans, acoustic splitters, and for STOL engine nacelles. Several test support applications are also given.

Albers, J. A.↗