Search NASA⌕ Search

SEARCH · Search NASA

Results for “Localization Error”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

An accurate method for two-point boundary value problems

A second-order method for solving two-point boundary value problems on a uniform mesh is presented where the local truncation error is obtained for use with the deferred correction process. In this simple finite difference method the tridiagonal nature of the classical method is preserved but the magnitude of each term in the truncation error is reduced by a factor of two. The method is applied to a number of linear and nonlinear problems and it is shown to produce more accurate results than either the classical method or the technique proposed by Keller (1969).

Walker, J. D. A.↗
NASA NTRS1980

Grid generation for time dependent problems: Criteria and methods

The problem of generating local mesh refinements when solving time dependent partial differential equations was examined. The problem of creating an appropriate grid, given a mesh function h defined over the spatial domain is discussed. A data structure which permits efficient use of the resulting grid is described. A good choice for h is an estimate of the local truncation error, and several ways to estimate it are discussed. The efficiency and implementation problems of these error estimates were compared.

Berger, M.↗
NASA NTRS1981

Influence of boundary approximations and conditions on finite difference solutions

Numerical representations of boundary approximations and conditions for three problems are investigated to determine the resulting global accuracy of the steady state solution. Numerical accuracy with various boundary approximations is determined for quasi-one-dimensional inviscid flow in a duct with the interior grid points evaluated using the MacCormack scheme. When an extrapolation approximation with first order local truncation error is used, the global second order accuracy of the difference scheme can be destroyed. For one dimensional flow in a porous medium, an implicit midpoint difference scheme which is consistent with the boundary conditions is developed without the need of boundary approximations. A dissipative model problem is solved with the boundary conditions discretized with first and second order accuracy. The overall second order accuracy of the difference scheme is destroyed if first order numerical representation of one of the boundary conditions is used. With a boundary approximation, the second order global accuracy of the model problem is retained if either second order extrapolation or first order representation of the governing equation is used.

Blottner, F. G.↗
NASA NTRS1984

Recent advances in methods for numerical solution of O.D.E. initial value problems

In the mathematical modeling of physical systems, it is often necessary to solve an initial value problem (IVP), consisting of a system of ordinary differential equations (ODE). A typical program produces approximate solutions at certain mesh points. Almost all existing codes try to control the local truncation error, while the user is really interested in controlling the true or global error. The present investigation provides a review of recent advances regarding the solution of the IVP, giving particular attention to stiff systems. Stiff phenomena are customarily defined in terms of the eigenvalues of the Jacobian. There are, however, some difficulties connected with this approach. It is pointed out that an estimate of the Lipschitz constant proves to be a very practical way to determine the stiffness of a problem.

Bui, T. D.↗
NASA NTRS1987

Loran-C approach guidance project current status

There are four areas of work in the Loran-C flight test project. Current results provide performance data on the effects of Signal Noise Ratio (SNR) on the dynamic performance of the receiver filters for Loran-C data, and data on Loran-C grid deformation at a microscale of 100 meters. The Loran-C receiver provides a line of position (LOP) Master and Slave transmitter at an angle 0 to magnetic north. No transformation to latitude-longitude reference frame is required since this is the major source of Loran-C navigation errors. A local coordinate frame is established centered at touchdown point on the runway with directions along and across the runway. A Loran-C data collection system was set up. The Loran-C data are sent directly to an Apple II computer with a 12 inch monitor. The effect of SNR on Loran-C precision is shown for two receiver filters of different frequency response. A set of ground level static readings of touchdown was taken around Hanscom Field and transferred to an accurate detailed layout drawing; this showed local distortions of the average touchdown values.

Elias, A. L.↗
NASA NTRS1989

Viscous-inviscid interaction and local grid refinement via truncation error injection

A methodology is presented which makes it possible to decouple a complex problem having multiple disparate length scales into problems of single length scale so that they can be solved more efficiently on a computer. The method is applied to a viscous transonic flow over an airfoil. It is found that accurate prediction of the flow over an airfoil can be obtained by solving the Euler equations on a relatively coarse global grid with viscous effects computed separately on a boundary-layer type grid and injected into the global grid solution as a combination of vorticity and trucation error.

Goble, Brian D.↗
NASA NTRS1990

High accuracy solutions of incompressible Navier-Stokes equations

In recent years, high accuracy finite difference approximations were developed for partial differential equations of elliptic type, with particular emphasis on the convection-diffusion equation. These approximations are of compact type, have a local truncation error of fourth order, and allow the use of standard iterative schemes to solve the resulting systems of algebraic equations. These high accuracy approximations are extended to the solution of Navier-Stokes equations. Solutions are obtained for the model problem of driven cavity and are compared with solutions obtained using other approximations and those obtained by other authors. It is discovered that the high order approximations do indeed produce high accuracy solutions and have a potential for use in solving important problems of viscous fluid flows.

Gupta, Murli M.↗
NASA NTRS1992

An efficient HZETRN (a galactic cosmic ray transport code)

An accurate and efficient engineering code for analyzing the shielding requirements against the high-energy galactic heavy ions is needed. The HZETRN is a deterministic code developed at Langley Research Center that is constantly under improvement both in physics and numerical computation and is targeted for such use. One problem area connected with the space-marching technique used in this code is the propagation of the local truncation error. By improving the numerical algorithms for interpolation, integration, and grid distribution formula, the efficiency of the code is increased by a factor of eight as the number of energy grid points is reduced. The numerical accuracy of better than 2 percent for a shield thickness of 150 g/cm(exp 2) is found when a 45 point energy grid is used. The propagating step size, which is related to the perturbation theory, is also reevaluated.

Shinn, Judy L.↗
NASA NTRS1993

Hierarchical Poly Tree Configurations for the Solution of Dynamically Refined Finte Element Models

This paper demonstrates how a multilevel substructuring technique, called the Hierarchical Poly Tree (HPT), can be used to integrate a localized mesh refinement into the original finite element model more efficiently. The optimal HPT configurations for solving isoparametrically square h-, p-, and hp-extensions on single and multiprocessor computers is derived. In addition, the reduced number of stiffness matrix elements that must be stored when employing this type of solution strategy is quantified. Moreover, the HPT inherently provides localize 'error-trapping' and a logical, efficient means with which to isolate physically anomalous and analytically singular behavior.

Gute, G. D.↗
NASA NTRS1993

Finite element/finite volume approaches with adaptive time stepping strategies for transient thermal problems

An adaptive time stepping strategy for transient thermal analysis of engineering systems is described which computes the time step based on the local truncation error with a good global error control and obtains optimal time steps to be used during the analysis. Combined mesh partitionings involving FEM/FVM meshes based on physical situations to obtain numerically improved physical representations are also proposed. Numerical test cases are described and comparative pros and cons are identified for practical situations.

Mohan, Ram V.↗
NASA NTRS1994

A new flux-conserving numerical scheme for the steady, incompressible Navier-Stokes equations

This paper is concerned with the continued development of a new numerical method, the space-time solution element (STS) method, for solving conservation laws. The present work focuses on the two-dimensional, steady, incompressible Navier-Stokes equations. Using first an integral approach, and then a differential approach, the discrete flux conservation equations presented in a recent paper are rederived. Here a simpler method for determining the flux expressions at cell interfaces is given; a systematic and rigorous derivation of the conditions used to simulate the differential form of the governing conservation law(s) is provided; necessary and sufficient conditions for a discrete approximation to satisfy a conservation law in E2 are derived; and an estimate of the local truncation error is given. A specific scheme is then constructed for the solution of the thin airfoil boundary layer problem. Numerical results are presented which demonstrate the ability of the scheme to accurately resolve the developing boundary layer and wake regions using grids which are much coarser than those employed by other numerical methods. It is shown that ten cells in the cross-stream direction are sufficient to accurately resolve the developing airfoil boundary layer.

Scott, James R.↗
NASA NTRS1994

Accurate finite difference methods for time-harmonic wave propagation

Finite difference methods for solving problems of time-harmonic acoustics are developed and analyzed. Multidimensional inhomogeneous problems with variable, possibly discontinuous, coefficients are considered, accounting for the effects of employing nonuniform grids. A weighted-average representation is less sensitive to transition in wave resolution (due to variable wave numbers or nonuniform grids) than the standard pointwise representation. Further enhancement in method performance is obtained by basing the stencils on generalizations of Pade approximation, or generalized definitions of the derivative, reducing spurious dispersion, anisotropy and reflection, and by improving the representation of source terms. The resulting schemes have fourth-order accurate local truncation error on uniform grids and third order in the nonuniform case. Guidelines for discretization pertaining to grid orientation and resolution are presented.

Harari, Isaac↗
NASA NTRS2000

A Domain-Decomposed Multilevel Method for Adaptively Refined Cartesian Grids with Embedded Boundaries

Preliminary verification and validation of an efficient Euler solver for adaptively refined Cartesian meshes with embedded boundaries is presented. The parallel, multilevel method makes use of a new on-the-fly parallel domain decomposition strategy based upon the use of space-filling curves, and automatically generates a sequence of coarse meshes for processing by the multigrid smoother. The coarse mesh generation algorithm produces grids which completely cover the computational domain at every level in the mesh hierarchy. A series of examples on realistically complex three-dimensional configurations demonstrate that this new coarsening algorithm reliably achieves mesh coarsening ratios in excess of 7 on adaptively refined meshes. Numerical investigations of the scheme's local truncation error demonstrate an achieved order of accuracy between 1.82 and 1.88. Convergence results for the multigrid scheme are presented for both subsonic and transonic test cases and demonstrate W-cycle multigrid convergence rates between 0.84 and 0.94. Preliminary parallel scalability tests on both simple wing and complex complete aircraft geometries shows a computational speedup of 52 on 64 processors using the run-time mesh partitioner.

Aftosmis, M. J.↗
NASA NTRS2011

Lessons Learned from Assimilating Altimeter Data into a Coupled General Circulation Model with the GMAO Augmented Ensemble Kalman Filter

Satellite altimetry measurements have provided global, evenly distributed observations of the ocean surface since 1993. However, the difficulties introduced by the presence of model biases and the requirement that data assimilation systems extrapolate the sea surface height (SSH) information to the subsurface in order to estimate the temperature, salinity and currents make it difficult to optimally exploit these measurements. This talk investigates the potential of the altimetry data assimilation once the biases are accounted for with an ad hoc bias estimation scheme. Either steady-state or state-dependent multivariate background-error covariances from an ensemble of model integrations are used to address the problem of extrapolating the information to the sub-surface. The GMAO ocean data assimilation system applied to an ensemble of coupled model instances using the GEOS-5 AGCM coupled to MOM4 is used in the investigation. To model the background error covariances, the system relies on a hybrid ensemble approach in which a small number of dynamically evolved model trajectories is augmented on the one hand with past instances of the state vector along each trajectory and, on the other, with a steady state ensemble of error estimates from a time series of short-term model forecasts. A state-dependent adaptive error-covariance localization and inflation algorithm controls how the SSH information is extrapolated to the sub-surface. A two-step predictor corrector approach is used to assimilate future information. Independent (not-assimilated) temperature and salinity observations from Argo floats are used to validate the assimilation. A two-step projection method in which the system first calculates a SSH increment and then projects this increment vertically onto the temperature, salt and current fields is found to be most effective in reconstructing the sub-surface information. The performance of the system in reconstructing the sub-surface fields is particularly impressive for temperature, but not as satisfactory for salt.

Keppenne, Christian↗
NASA NTRS2011

GEM-CEDAR Challenge: Comparing Ionospheric Models with Poynting Flux from DMSP Observations

As part to the GEM-CEDAR challenge we are extending the model-data comparisons to electrodynamic in-situ measurements in low-Earth orbit. We use DMSP observations of electric and magnetic fields to compute Poynting Flux values along the satellite track in high latitudes including the auroral zones and the polar cap. Models of the ionosphere that include electrodynamic parameters have been run for five events selected for the GEM-CEDAR modeling challenge for which DMSP data are available for comparison. Combined with a magnetic field model we use the modeled electric fields to compute Poynting Flux and Joule Dissipation values from outputs of CTIPe, TIE-GCM, the ionospheric electrodynamics solvers of the SWMF, LFM and OpenGGCM magnetosphere-ionosphere coupled models, and the Weimer electric field model. The online metrics analysis tool at the Community Coordinated Modeling Center (CCMC) has been updated to handle the analysis of separate short segments of available data (high-latitude sections of the satellite orbit) with model outputs to analyze how well auroral patterns are being reproduced by the models. We present initial results from the new analysis tool in terms of model yields (ratio of the difference between maximum and minimum values of model results to the observation), timing/location errors of local maxima in the inbound and outbound auroral crossings as well as cross-correlations for individual passes. We collect the information for many DMSP passes and present an analysis for model performance during quiet and geomagnetically disturbed time periods using half-orbit integrated values as well.

Rastaetter, Lutz↗
NASA NTRS2012

Apparatus, Method and Program Storage Device for Determining High-Energy Neutron/Ion Transport to a Target of Interest

An apparatus, method and program storage device for determining high-energy neutron/ion transport to a target of interest. Boundaries are defined for calculation of a high-energy neutron/ion transport to a target of interest; the high-energy neutron/ion transport to the target of interest is calculated using numerical procedures selected to reduce local truncation error by including higher order terms and to allow absolute control of propagated error by ensuring truncation error is third order in step size, and using scaling procedures for flux coupling terms modified to improve computed results by adding a scaling factor to terms describing production of j-particles from collisions of k-particles; and the calculated high-energy neutron/ion transport is provided to modeling modules to control an effective radiation dose at the target of interest.

Wilson, John W.↗
NASA NTRS2017

Image-Optimized Coronal Magnetic Field Models

We have reported previously on a new method we are developing for using image-based information to improve global coronal magnetic field models. In that work we presented early tests of the method which proved its capability to improve global models based on flawed synoptic magnetograms, given excellent constraints on the field in the model volume. In this follow-up paper we present the results of similar tests given field constraints of a nature that could realistically be obtained from quality white-light coronagraph images of the lower corona. We pay particular attention to difficulties associated with the line-of-sight projection of features outside of the assumed coronagraph image plane, and the effect on the outcome of the optimization of errors in localization of constraints. We find that substantial improvement in the model field can be achieved with this type of constraints, even when magnetic features in the images are located outside of the image plane.

Jones, Shaela I.↗