Search NASASearch

SEARCH · Search NASA

Results for “MAGNETIC MEASUREMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Variability of plasma sheet dynamics

IMP 7 observations of plasma sheet structure and dynamics made during a 24-h period in which the satellite traversed the tail plasma sheet at a radial distance of 35 earth radii and remained within 2 earth radii of the expected position at the neutral sheet and in which at least five substorms occured on the ground are presented. High-time-resolution measurements of the magnetic field, plasma flow and greater than 50-keV protons obtained by the satellite and ground-based magnetic measurements are discussed for a 4-hr interval in which two small substorms occurred, a 6-hr geomagnetically quiet interval in which moderate variable plasma flows were observed, a very rapid, smooth neutral sheet crossing and earthward plasma flow during the expansion phase of a small substorm, a moderate-size substorm in which a prolonged interval of field-aligned tailward flow commenced at onset, a strong tailward and dawnward flow burst in an interval between substorms and a large substorm in which strong tailward flow was observed. Observations indicate the significant distortion of the tail field, possibly by plasma flow stresses, a neutral sheet structure occasionally resembling the hydromagnetic rotational discontinuity and a high level of magnetic turbulence during an earthward plasma flow which may contribute towards plasma sheet dissipation.

Coroniti, F. V.

First-Generation Jet Propulsion Laboratory "Hockey-Puck" Free-Flying Magnetometers for Distributed In-Situ Multiprobe Measurement of Current Density Filamentation in the Northern Auroral Zone: Enstrophy Mission

The sub-orbital rocket mission was a collaborative project between the University of New Hampshire, Cornell University, and the Jet Propulsion Laboratory (JPL) to study filamentation phenomena in the northern Auroral zone. The Enstrophy mission test flies the JPL Free-Flying Magnetometer (FFM) concept. The FFM technology development task has been funded by NASA develop miniaturized, low-power, integrated "sensorcrafts". JPL's role was to design, integrate, test, and deliver four FFMs for deployment from the sounding rocket, allowing a unique determination of curl-B. This provides a direct measurement of magnetic-field-aligned current density along the rocket trajectory. A miniaturized three-axis fluxgate magnetometer was integrated with a 4-channel 22-bit sigma-delta Analog to Digital Converter (ADC), four temperature sensors, digital control electronics, seven (Li-SOCl2) batteries, two (4 deg x 170 deg field of view) sun-sensors, a fan-shaped-beam laser diode beacon, a (16 MHz) stable Temperature Compensated Crystal Oscillator (TCXO) clock, Radio Frequency (RF) communication subsystem, and an antenna for approximately 15 minutes of operation where data was collected continuously and transmitted in three (3) bursts (approximately 26 seconds each) to ground station antennas at Poker Flat, Alaska. FFMs were stowed within two trays onboard the rocket during the rocket launch and were released simultaneously using the spinning action of the rocket at approximately 300 km altitude (approximately 100 sec. into the flight). FFMs were deployed with spin rate of approximately 17 Hz and approximately 3 m/sec linear velocity with respect to the rocket. For testing purposes while the rocket was in the launch pad and during flight prior to release of FFMs from the rocket, commands (such as "power on", "test", "flight", "power off', and clock "Reset" signal) were transmitted via a infrared Light Emitting Diode to an infrared detector in the FFM. Special attention was paid to low magnetic signature electronic design and choice of materials in packaging. The miniaturized fluxgate magnetometers had a range of 1-60000 nT with 0.1% full-scale linearity. The frequency range of interest for magnetic measurement was 10 mHz - 50 Hz. Digital data from the magnetometer's three axes were placed in a 4MB Static Random Access Memory (SRAM) in data packages (frames) formatted together with time tags and frame ID. After a specified time was elapsed, the data were Viterbi encoded and transmitted at a rate of 100 kbps (BPSK). Each of the four FFMs transmitted at different frequency. These carrier frequencies were in the range of 2200-2300 MHz. The antenna was a single patch on a high dielectric constant substrate covering one end-plate of the hockey-puck-sized unit. The local clocks aboard the FFMs were reset at the start of the mission and stayed synchronized within 3 msec during the mission. Position of each FFM with respect to the rocket is calculated by the knowledge of its release velocity (measured at exit point of the FFM launcher tract) providing an accuracy of 1 m over the maximum range of 3 km. Spatial and temporal nature of observants can be separated to within 3 m in space or 3 msec time interval.

Javadi, H.

Tethered Satellites as Enabling Platforms for an Operational Space Weather Monitoring System

Space weather nowcasting and forecasting models require assimilation of near‐real time (NRT) space environment data to improve the precision and accuracy of operational products. Typically, these models begin with a climatological model to provide "most probable distributions" of environmental parameters as a function of time and space. The process of NRT data assimilation gently pulls the climate model closer toward the observed state (e.g. via Kalman smoothing) for nowcasting, and forecasting is achieved through a set of iterative physics‐based forward‐prediction calculations. The issue of required space weather observatories to meet the spatial and temporal requirements of these models is a complex one, and we do not address that with this poster. Instead, we present some examples of how tethered satellites can be used to address the shortfalls in our ability to measure critical environmental parameters necessary to drive these space weather models. Examples include very long baseline electric field measurements, magnetized ionospheric conductivity measurements, and the ability to separate temporal from spatial irregularities in environmental parameters. Tethered satellite functional requirements will be presented for each space weather parameter considered in this study.

Krause, L. Habash

Tethered Satellites as an Enabling Platform for Operational Space Weather Monitoring Systems

Tethered satellites offer the potential to be an important enabling technology to support operational space weather monitoring systems. Space weather "nowcasting" and forecasting models rely on assimilation of near-real-time (NRT) space environment data to provide warnings for storm events and deleterious effects on the global societal infrastructure. Typically, these models are initialized by a climatological model to provide "most probable distributions" of environmental parameters as a function of time and space. The process of NRT data assimilation gently pulls the climate model closer toward the observed state (e.g., via Kalman smoothing) for nowcasting, and forecasting is achieved through a set of iterative semi-empirical physics-based forward-prediction calculations. Many challenges are associated with the development of an operational system, from the top-level architecture (e.g., the required space weather observatories to meet the spatial and temporal requirements of these models) down to the individual instruments capable of making the NRT measurements. This study focuses on the latter challenge: we present some examples of how tethered satellites (from 100s of m to 20 km) are uniquely suited to address certain shortfalls in our ability to measure critical environmental parameters necessary to drive these space weather models. Examples include long baseline electric field measurements, magnetized ionospheric conductivity measurements, and the ability to separate temporal from spatial irregularities in environmental parameters. Tethered satellite functional requirements are presented for two examples of space environment observables.

Gilchrist, Brian E.

Disentangling the Entangled Linkages of Magnetic Helicity

Magnetic helicity, H, measures magnetic linkages in a volume. The early theoretical development of helicity focused on magnetically closed systems in V bounded by ∂V. For magnetically closed systems, V ∈ R -3 = V + V∗, no magnetic flux threads the boundary, n̂ · B|∂V = 0. Berger & Field (1984) and Finn & Antonsen (1985) extended the definition of helicity to relative helicity, H, for magnetically open systems where magnetic flux may thread the boundary. Berger (1999, 2003) expressed this relative helicity as two gauge invariant terms that describe the self helicity of magnetic field that closes inside V and the mutual helicity between the magnetic field that threads the boundary ∂V and the magnetic field that closes inside V. The total magnetic field that permeates V entangles magnetic fields that are produced by current sources J in V with magnetic fields that are produced by current sources J∗ in V∗. Building on this fact, we extend Berger’s expressions for relative magnetic helicity to eight gauge invariant quantities that simultaneously characterize both of these self and mutual helicities and attribute their origins to currents J in V and/or J∗ in V∗, thereby disentangling the domain of origin for these entangled linkages. We arrange these eight terms into novel expressions for internal and external helicity (self) and internal-external helicity (mutual) based on their domain of origin. The implications of these linkages for interpreting magnetic energy is discussed and new boundary observables are proposed for tracking the evolution of the field that threads the boundary.

Analytical mathematics

Status of MSBS study at NAL

Two Magnetic Suspension and Balance Systems (MSBS) at the National Aerospace Laboratory (NAL) in Japan are introduced. They are the 10 cm MSBS and the 60 cm MSBS. They have 10 cm x 10 cm and 60 cm x 60 cm test sections. The control of suspending a model at the 10 cm MSBS is six degrees of freedom including the rolling moment control. The model for the rolling moment control has two pairs of small extra permanent magnets at both its ends plus a main cylindrical magnet. The rolling moment is generated by the magnetic forces acting on the extra magnets by controlled current passing through the four side coils independently. Test results show the roll angle of the model is controlled in this way. The dynamic calibration test was carried out at the MSBS in five degrees of freedom without the rolling moment control. The model is a simple cylindrical magnet magnetized along its axis. The obtained results show that the dynamic calibration with measured magnetic field intensity is much superior to that with the coil currents. The 60 cm MSBS was designed with some data obtained at the 10 cm one. It is fundamentally proportional to the 10 cm one in size and coil positions. The measured magnetic field intensity is not so strong as expected at design. It was operated first in 1993. The control is three degrees of freedom in the longitudinal direction.

Sawada, Hideo

Large Amplitude Whistlers in the Magnetosphere Observed with Wind-Waves

We describe the results of a statistical survey of Wind-Waves data motivated by the recent STEREO/Waves discovery of large-amplitude whistlers in the inner magnetosphere. Although Wind was primarily intended to monitor the solar wind, the spacecraft spent 47 h inside 5 R(sub E) and 431 h inside 10 R(sub E) during the 8 years (1994-2002) that it orbited the Earth. Five episodes were found when whistlers had amplitudes comparable to those of Cattell et al. (2008), i.e., electric fields of 100 m V/m or greater. The whistlers usually occurred near the plasmapause. The observations are generally consistent with the whistlers observed by STEREO. In contrast with STEREO, Wind-Waves had a search coil, so magnetic measurements are available, enabling determination of the wave vector without a model. Eleven whistler events with useable magnetic measurements were found. The wave vectors of these are distributed around the magnetic field direction with angles from 4 to 48deg. Approximations to observed electron distribution functions show a Kennel-Petschek instability which, however, does not seem to produce the observed whistlers. One Wind episode was sampled at 120,000 samples/s, and these events showed a signature that is interpreted as trapping of electrons in the electrostatic potential of an oblique whistler. Similar waveforms are found in the STEREO data. In addition to the whistler waves, large amplitude, short duration solitary waves (up to 100 mV/m), presumed to be electron holes, occur in these passes, primarily on plasma sheet field lines mapping to the auroral zone.

Kellogg, P. J.

Application of the minimum correlation technique to the correction of the magnetic field measured by magnetometers on spacecraft

Some aspects of the problem of obtaining precise, absolute determination of the vector of low magnetic fields existing in the interplanetary medium are addressed. In the case of a real S/C, there is always the possibility of a spurious field which includes the spacecraft residual field and/or possible field from the sensors, due to both electronic drifts or changes of the magnetic properties of the sensor core. These latter effects may occur during storage of the sensors prior to launching and/or in-flight. The reliability is demonstrated for a method which postulates that there should be no correlation between changes in measured field magnitude and changes in the measured inclination of the field with respect to any one of three fixed Cartesian component directions. Application of this minimum correlation technique to data from IMP-8 and Helios 1-2 shows it is appropriate for determination of the zero offset corrections of triaxial magnetometers. In general, a number of the order of 1000 consecutive data points is sufficient for a good determination.

Mariani, F.

The significance of vector magnetic field measurements

Observations of four flaring solar active regions, obtained during 1980-1986 with the NASA Marshall vector magnetograph (Hagyard et al., 1982 and 1985), are presented graphically and characterized in detail, with reference to nearly simultaneous Big Bear Solar Observatory and USAF ASW H-alpha images. It is shown that the flares occurred where local photospheric magnetic fields differed most from the potential field, with initial brightening on either side of a magnetic-neutral line near the point of maximum angular shear (rather than that of maximum magnetic-field strength, typically 1 kG or greater). Particular emphasis is placed on the fact that these significant nonpotential features were detected only by measuring all three components of the vector magnetic field.

Hagyard, M. J.

Coronal Magnetic Field Measurement Using CME-Driven Shock Observations

Collisionless shocks form ahead of coronal mass ejections (CMEs) when the CME speed exceeds the Alfven speed of the ambient plasma in the corona and interplanetary medium. The shock stands at a distance from the CME flux rope that depends on the shock Mach number, the geometry of the driver, and the adiabatic index. While the shock ahead of the CME has been observed for a long time in the in situ data, it has been identified recently near the Sun in the coronagraphic and EUV images. Unlike in situ observations, the imaging observations are two dimensional, so one can better discern the CME-shock relationship near the Sun. Gopalswamy and Yashiro demonstrated that the coronal magnetic field can be derived from the shock standoff distance measured in coronagraphic images. The method involves measuring the standoff distance, the radius of curvature of the flux rope, and assuming the value of the adiabatic index and deriving the Alfvenic Mach number. The next step is to derive the Alfvenic Mach number from the measured shock speed and an estimate of the local solar wind speed. The final step involves deriving the magnetic field from the Alfven speed by measuring the local plasma density either from coronagraphic (polarized brightness) images or from the band-splitting of type II radio bursts. In this paper, we derive the combined magnetic field profile from near the Sun to the edge of the LASCO field of view (1.5 to 30 solar radii) and compare it with the current model profiles.

Gopalswarmy, Nat

Space-based UV Spectropolarimetry for Chromospheric Magnetic Field Measurements

High-resolution observations with space-and ground-based telescopes, along with advanced numerical modeling, have highlighted the intricate coupling between the chromosphere, transition region, and corona, and the critical role the chromosphere plays in the mass and energy balance of the outer solar atmosphere. Despite these recent advances, a major impediment to better understanding the solar atmosphere is our lack of empirical knowledge regarding the direction and strength of the magnetic field in the upper chromosphere (Decadal Survey, 2012). Such measurements are crucial to address several major unresolved issues in solar physics: for example, to constrain the energy flux carried by the Alfvén waves propagating through the chromosphere, and to determine the height at which the plasma β = 1 transition occurs, which has important consequences for the braiding of magnetic fields, for propagation and mode conversion of waves and for non-linear force-free extrapolation methods that are key to determining what drives instabilities such as flares or coronal mass ejections. Probing the magnetic nature of the Sun’s atmosphere requires measurement of the Stokes I, Q, U and V profiles of relevant spectral lines (of which Q, U and V encode the magnetic field information). Many of the magnetically sensitive lines formed in the chromosphere and transition region are in the ultraviolet spectrum, necessitating observations above the absorbing terrestrial atmosphere. The Chromospheric Layer Spectro-Polarimeter (“CLASP2”) sounding rocket was flown successfully in April 2019, as a follow-on to the successful flight in September 2015 of the Chromospheric Lyman-Alpha Spectro-Polarimeter (“CLASP1”). In October of 2021, we re-flew the CLASP2 experiment with a modified observing program to further demonstrate the maturity of the UV spectropolarimetry techniques, and readiness for development into a satellite observatory. During the reflight, called “CLASP2.1”, the spectrograph slit was scanned across an active region plage to acquire a two-dimensional map of Stokes V/I, to demonstrate the ability of UV spectropolarimetry to yield chromospheric magnetic fields over a large area.

David E McKenzie

Recent aerodynamic measurements with Magnetic Suspension Systems

This paper reviews recent aerodynamic tests of a family of slanted-base ogive-cylinders using the NASA Langley 13-inch Magnetic Suspension and Balance System. Results include drag, lift, pitching moment, support interference and base pressure measurements. Mach numbers were in the range 0.04 to 0.2. Drag results are shown to be in satisfactory agreement with previous measurements. Significant support interferences were found at all test conditions. Comparison is made between interference free base pressures, obtained using remote telemetry, and sting cavity pressures. Test results and procedures are briefly discussed in the context of the proposed helium flow facility.

Britcher, Colin P.

The morningside low-latitude boundary layer as determined from electric and magnetic field measurements on Geotail

On October 17, 1992, the Geotail satellite crossed the dawnside magnetopause approximately 41 times. At the majority of these crossings, the magnetic field and the normal component of the electric field were larger and the plasma density was smaller in a low-latitude boundary layer than they were in either the nearby magnetosheath or in the magnetosphere. These results are intepreted in terms of the Kelvin-Helmholtz instability associated with velocity shear at the magnetopause. Consistent with this interpretation, it is shown that the low-latitude boundary layer was the region where the flow decreased from its magnetosheath to magnetospheric value. Evidence is presented that the magnetopause was locally oriented within less than 20 deg of its nominal geometry on these crossings and that it moved with an amplitude of 1500-6000 kilometers. The thickness of the low-latitude boundary layer averaged 800 kilometers and the electric potential across it averaged 4 kilovolts with a spread of a factor of 2. Thus, the viscous interaction and similar processes are not significant contributors to magnetospheric convection.

Mozer, F. S.

Paleomagnetic Analysis Using SQUID Microscopy

Superconducting quantum interference device (SQUID) microscopes are a new generation of instruments that map magnetic fields with unprecedented spatial resolution and moment sensitivity. Unlike standard rock magnetometers, SQUID microscopes map magnetic fields rather than measuring magnetic moments such that the sample magnetization pattern must be retrieved from source model fits to the measured field data. In this paper, we presented the first direct comparison between paleomagnetic analyses on natural samples using joint measurements from SQUID microscopy and moment magnetometry. We demonstrated that in combination with apriori geologic and petrographic data, SQUID microscopy can accurately characterize the magnetization of lunar glass spherules and Hawaiian basalt. The bulk moment magnitude and direction of these samples inferred from inversions of SQUID microscopy data match direct measurements on the same samples using moment magnetometry. In addition, these inversions provide unique constraints on the magnetization distribution within the sample. These measurements are among the most sensitive and highest resolution quantitative paleomagnetic studies of natural remanent magnetization to date. We expect that this technique will be able to extend many other standard paleomagnetic techniques to previously inaccessible microscale samples.

Weiss, Benjamin P.