Development of reductive methods for metal recovery relevant to nuclear material processing
Explore the source record for details and available documents.
Nichols, Asa Wesley↗
SEARCH · Search NASA
Results for “MATERIALS RECOVERY”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Recovery of High Value Anode Materials for a Closed Loop Li-ion Battery Recycling Process (Final Report)
Battery Resourcers’ goal with this Small Business Innovative Research Phase 1 project was to produce high quality and high purity graphite generated from its Li-ion battery recycling technology. Battery Resourcers’ technology recovers cathode material from a broad spectrum of Li-ion battery regardless of size, shape or chemistry. In Battery Resourcers existing model, the graphite is recovered to be used as a reductant and therefore the battery materials cost or recycling cost is not lowered by the recovery of the graphite. Currently, Battery Resourcers is piloting its lithium ion battery recycling process and the recovered LiNi 0.33 Mn 0.33 Co 0.33 O 2 (NMC111) or LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC111) cathode materials have shown that they can outperform existing commercial NMC111 cathode materials while being produced at a projected lower cost. Battery Resourcers and its subcontractor WPI have demonstrated the same success with the recovered graphite for anode materials. The success of this award will enable Battery Resourcers offer lowest cost anode materials while reducing the carbon footprint of the battery industry. This will potentially lower the cost of EV by lowering the upfront cost of the battery and the end of life disposal costs. The technical objectives of this Phase 1 research project are to purify the recovered graphite from Battery Resourcers leaching process and demonstrate it is viable to be used in new electric vehicle lithium ion batteries. This project demonstrated that Battery Resourcers can recover graphite with less than 2% impurities. To separate the graphite from other materials Battery Resourcers will employed new filtering techniques and chemical processing methods.
25 ENERGY STORAGE↗
Anisotropic constitutive modeling for nickel-base single crystal superalloys
An anisotropic constitutive model was developed based on crystallographic slip theory for nickel base single crystal superalloys. The constitutive equations developed utilizes drag stress and back stress state variables to model the local inelastic flow. Specially designed experiments were conducted to evaluate the existence of back stress in single crystal superalloy Rene N4 at 982 C. The results suggest that: (1) the back stress is orientation dependent; and (2) the back stress state variable is required for the current model to predict material anelastic recovery behavior. The model was evaluated for its predictive capability on single crystal material behavior including orientation dependent stress-strain response, tension/compression asymmetry, strain rate sensitivity, anelastic recovery behavior, cyclic hardening and softening, stress relaxation, creep and associated crystal lattice rotation. Limitation and future development needs are discussed.
Sheh, Michael Y.↗
On the Cauchy Problem for the Wave Equation with Data on the Boundary
The Cauchy problem for the wave equation in Ω × ℝ with data given on some part of the boundary ∂Ω × ℝ is considered. A reconstruction algorithm for this problem based on analytic expressions is given. This result is applicable to the problem of determining a nonstationary wave field arising in geophysics, photoacoustic tomography, tsunami wave source recovery.
97 MATHEMATICS AND COMPUTING↗
Utilizing Weather RADAR for Rapid Location of Meteorite Falls and Space Debris Re-Entry
This activity utilizes existing NOAA weather RADAR imagery to locate meteorite falls and space debris falls. The near-real-time availability and spatial accuracy of these data allow rapid recovery of material from both meteorite falls and space debris re-entry events. To date, at least 22 meteorite fall recoveries have benefitted from RADAR detection and fall modeling, and multiple debris re-entry events over the United States have been observed in unprecedented detail.
Fries, Marc D.↗
Second Annual Meeting of the Working Group on Extraterrestrial Resources
Conference on NASA plans, lunar logistics and bases, lunar water detection and recovery, planetary material for food synthesis and life support systems, and biological exploitation
MICROORGANISM↗
Autonomous Synthesis of Metastable Materials Using a Modular Mixed-Flow Reactor
Understanding and controlling atomic-level processes at solid-liquid interfaces is key to advancing technologies in energy storage, carbon capture, critical element recovery, and materials synthesis. Many of these processes are dominated by the formation of short-lived intermediate precipitates that determine the final properties of synthesized materials. However, studying these intermediates is challenging due to their sensitivity and the reliance on trial-and-error methods. To address this, we developed an automated variable-volume mixed-flow reactor (MFR) to optimize metastable material synthesis and investigate rapid kinetic processes. This state-of-the-art MFR system, paired with an automated modeling framework, enables efficient synthesis and real-time analysis of transient phases. Benchmarking with advanced capabilities, such as wide-/small-angle X-ray scattering, allows us to resolve fast nucleation and growth dynamics that were previously inaccessible. By combining automation, ML-guided optimization, and tailored kinetic modeling, this approach provides a robust platform for improving material design and achieving precise control over solid-liquid reactions.
36 MATERIALS SCIENCE↗
Critical review of functionalized silica sorbent strategies for selective extraction of rare earth elements from acid mine drainage
We report the ubiquitous and growing global reliance on rare earth elements (REEs) for modern technology and the need for reliable domestic sources underscore the rising trend in REE-related research. Adsorption-based methods for REE recovery from liquid waste sources are well-positioned to compete with those of solvent extraction, both because of their expected lower negative environmental impact and simpler process operations. Functionalized silica represents a rising category of low cost and stable sorbents for heavy metal and REE recovery. These materials have collectively achieved high capacity and/or high selective removal of REEs from ideal solutions and synthetic or real coal wastewater and other leachate source. These sorbents are competitive with conventional materials, such as ion exchange resins, activated carbon; and novel polymeric materials like ion-imprinted particles and metal organic frameworks (MOFs). This critical review first presents a data mining analysis for rare earth element recovery publications indexed in Web of science, highlighting changes in REE recovery research foci and confirming the sharply growing interest in functionalized silica sorbents. A detailed examination of sorbent formulation and operation strategies to selectively separate heavy (HREE), middle (MREE), and light (LREE) REEs from the aqueous sources is presented. Selectivity values for sorbents were largely calculated from available figure data and gauged the success of the associated strategies, primarily: (1) silane-grafted ligands, (2) impregnated ligands, and (3) bottom-up ligand/silica hybrids. These were often accompanied by successful co-strategies, especially bite angle control, site saturation, and selective REE elution. Recognizing the need to remove competing fouling metals to achieve purified REE “baskets,” we highlight techniques for eliminating these species from acid mine drainage (AMD) and suggest a novel adsorption-based process for purified REE extraction that could be adapted to different water systems.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Understanding Structural and Compositional Evolution during NMC Cathode Direct Recycling via Solid-State NMR
Recycling end-of-life lithium-ion batteries (LIBs) to recover high-value cathode materials such as LiNixMnyCozO2 (NMC) is driven by economical, geopolitical, and sustainability needs. There has been recent interest in direct recycling methods to improve efficiency and recovery of materials, including ionothermal, hydothermal, solid-state, or redox mediator methods. In conjunction with recycling process development, detailed structural characterization is necessary in order to understand the mechanisms and efficacy of cathode recycling steps. Solid-state nuclear magnetic resonance (NMR) spectroscopy is a unique tool that can probe Li coordination, bulk and surface environments, and transition metal ordering in recycled and upcycled NMC cathodes. Here, 6,7Li, 1H, and 19F NMR spectroscopy to probe structural and compositional changes as well as surface impurities that may form during each step in NMC direct recycling is utilized. During relithiation, Li reinsertion into the NMC lattice is observed. During upcycling, where the goal is to increase the Ni content in the NMC, incorporation of Ni-rich phases into the bulk Li environment is observed. Surface impurities formed during processing were also identified. These studies provide valuable information for optimizing recycling processes to reach targeted cathode composition and structure that can enable electrochemical performance comparable to or better than pristine materials.
36 MATERIALS SCIENCE↗
Delamination of Multilayer Plastic Films to Recover Polyethylene with Favorable Mechanical Properties
Multilayer plastic films play a critical role in packaging, with each polymer layer contributing specific properties to the multilayer film. Multilayer plastic films are not currently recyclable due to the bound polymers. With multilayer film production of about 20 million metric tons in 2024 and rising, endof- life treatment becomes pressing. This work presents a scalable solvent-based delamination recycling process that is applied to commercial postindustrial multimaterial films to unbind the materials within a multilayer film by dissolving only the adhesive layer and recover polyethylene (PE) as an intact solid film. Solventbased delamination is a simple process that allows the complete recovery of materials and solvents used in the process. The delaminating solvent, 88% formic acid in water, induces delamination of PE/PEI/PET and PE/PU/PET films at 70 °C in under an hour. Recovered PE has no contamination detected by Fourier transform infrared spectroscopy and mechanical properties on par with those of virgin resin. The recovery of high-quality solid PE film fit for reprocessing, at low operating temperatures and with closed-loop solvent reuse, promotes delamination as a low energy consumption and environmentally friendly recycling process. PE recovered from delamination can be reused in equivalent products, promoting circularity of multimaterial films.
chemical recycling↗
Enhanced resonant ultrasound spectroscopy for measurement of the elastic properties of multi-material systems
Understanding the elastic properties of materials is critical for their safe incorporation and predictable performance. Current methods of bulk elastic characterization often have notable limitations for in situ structural applications, with usage restricted to simple geometries and material distributions. To address these existing issues, this study sought to expand the capabilities of resonant ultrasound spectroscopy (RUS), an established nondestructive evaluation method, to include the characterization of isotropic multi-material samples. In this work, finite-element-based RUS analysis consisted of numerical simulations and experimental testing of composite samples comprised of material pairs with varying elasticity and density contrasts. Utilizing genetic algorithm inversion and mode matching, our results demonstrate that elastic properties of multi-material samples can be reliably identified within several percent of known or nominal values using a minimum number of identified resonance modes, given sample mass is held consistent. The accurate recovery of material properties for composite samples of varying material similarity and geometry expands the pool of viable samples for RUS and advances the method towards in situ inspection and evaluation.
36 MATERIALS SCIENCE↗
A viscoplastic theory applied to copper
A phenomenologically based viscoplastic model is derived for copper. The model is thermodynamically constrained by the condition of material dissipativity. Two internal state variables are considered. The back stress accounts for strain-induced anisotropy, or kinematic hardening. The drag stress accounts for isotropic hardening. Static and dynamic recovery terms are not coupled in either evolutionary equation. The evolution of drag stress depends on static recovery, while the evolution of back stress depends on dynamic recovery. The material constants are determined from isothermal data. Model predictions are compared with experimental data for thermomechanical test conditions. They are in good agreement at the hot end of the loading cycle, but the model overpredicts the stress response at the cold end of the cycle.
Freed, Alan D.↗
Highly Efficient Separation/Recycling Palladium(II) Ions from Aqueous Solutions by Silica Gel-Coated Graphene Oxide Modified with Mercapto Groups
The separation and recovery of precious metals from secondary resources is an extremely important and challenging task. Herein, a novel sorbent is successfully prepared by chemical grafting and utilized for the extraction and separation of Pd(II) ions from aqueous solutions. Various characterization techniques, including Fourier transform infrared spectroscopy, scanning electron microscopy, Brunauer–Emmett–Teller, X-ray photoelectron spectroscopy, and element analysis, are employed to study the structure, morphology, porous nature, and chemical composition of the as-prepared SiO{sub 2}@GO-SH nanocomposites. The adsorption of Pd(II) ions on the SiO{sub 2}@GO-SH can be described by the pseudo-second-order model and Langmuir isotherm model. The adsorption equilibrium has been attained within 90 min and the maximum adsorption capacity of 423.2 mg g{sup −1} was attained at pH 3.5 and T = 308 K. The results reveal that SiO{sub 2}@GO-SH exhibits an excellent adsorption performance towards Pd(II) ions. In addition, we have proposed the adsorption mechanism for Pd(II) ions on the SiO{sub 2}@GO-SH surface. The adsorption of Pd(II) in SiO{sub 2}@GO-SH is a chemisorption process, where partial adsorbed Pd(II) ions are reduced to Pd(0) by functional groups (-SH) in the SiO{sub 2}@GO-SH. The results indicate that SiO{sub 2}@GO-SH can serve as a promising sorbent for the efficient separation and recovery of palladium from the palladium-containing secondary resources.
36 MATERIALS SCIENCE↗
Evaluation of coal-associated sediments, wastes, and AMD sludge in the Southern Appalachian Basin as feedstock materials for REE and Li recovery
Critical minerals (CM) such as rare earth elements (REE+) and Lithium (Li) are essential to technological innovation, energy transitions, global economic and defense security, necessitating the search for unconventional resources and efficient recovery methods to avert supply chain disruptions. Here, this study evaluates coal-associated sediments (underclay and roof rock) and wastes from the Pennsylvanian Pottsville Formation of the Southern Appalachian Basin (SAB) as potential feedstocks for CM recovery. A total of 34 samples (15 underclays, 12 roof rocks, 5 Acid Mine Drainage (AMD) sludges, and 2 coal mining wastes) were characterized using XRD, XRF, ICP-MS, and μ-XRF analytical methods. The REE+ and Li concentrations of these materials ranged from 46.8 to 334.4 ppm and from 11.1 to 519 ppm, respectively, with one underclay sample (Hendrix 3456) yielding the highest values for both. Bulk mineralogy for all samples was dominated by aluminosilicate clay phases, particularly illite and kaolinite. All samples exhibited REY def, rel% values >26% and C outl indices that ranged from 0.69 to 0.94, classifying their REE ore potential as Category II (Promising) as defined by Seredin and Dai (2012). Extractability tests (EPA method 3051 A) yielded low REE+ and Li recoveries, with maximum values of 3.3% and 3.6%, respectively, suggesting associations with resistant minerals like clay and phosphates. Elemental mapping indicates that REE+ is associated with phosphate, whereas statistical analysis suggests that REE+ are associated with aluminosilicates, suggesting heterogeneous associations or minimal phosphate contribution. Li also correlated positively with Al 2 O 3 , indicating an aluminosilicate host. This study highlights the potential of coal-associated sediments in the SAB.
Clay minerals↗
Application of Glow Discharge Plasma to Alter Surface Properties of Materials
Some polymer materials that are considered important for spaceport operations are rendered noncompliant when subjected to the Kennedy Space Center (KSC) Standard electrostatic testing. These materials operate in stringent environmental conditions, such as high humidity. Treating materials that fail electrostatic testing and altering their surface properties so that they become compliant would result in considerable cost savings. Significant improvement in electrostatic dissipation of Saf-T-Vu PVC after treatment with air Atmospheric Plasma Glow Discharge (APGD) was observed and the material now passed the KSC electrostatic test. The O:C ratio on the surface, as monitored by X-ray Photoelectron Spectroscopy, increased from 0.165 tO 0.275 indicating enhanced oxidation, and surface contact angle measurements decreased from 107.5 to 72.6 showing increased hydrophilicity that accounted for the increased conductivity. Monitoring of the aging showed that the materials hydrophobic recovery resulted in it failing the electrostatic test 30 hours after treatment. This was probably due to the out-diffusion of the added Zn, Ba, and Cd salt stabilizers detected on the surface and/or diffusion of low molecular weight oligomers. On going work includes improving the long term hydrophilicity by optimizing the APGD process with different gas mixtures. Treatment of other spaceport materials is also presented.
Trigwell, Steve↗
Results of examination of materials from the solar maximum recovery mission
Four years and two months in space at 310 nautical miles orbit has produced different effects on Kapton, silver/Teflon, and on aluminum. Kapton, a polyimide, lost up to 31% in thickness, though other locations showed much less loss. The degradation of silver/Teflon was drastic but very localized, due perhaps to the formation of silver oxide, Ag2O, through cracks in the protective Inconel layer which exposed the silver to the oxygen atom environment. Penetrations of the thin aluminum sheet in the form of thermal louvers and also of the thermal blanket material due to unknown particles were unexpected, making the debris a potentially serious problem because of the threat of damage to components.
Park, J. J.↗
Imaging atomic-scale chemistry from fused multi-modal electron microscopy
Efforts to map atomic-scale chemistry at low doses with minimal noise using electron microscopes are fundamentally limited by inelastic interactions. Here, fused multi-modal electron microscopy offers high signal-to-noise ratio (SNR) recovery of material chemistry at nano- and atomic-resolution by coupling correlated information encoded within both elastic scattering (high-angle annular dark-field (HAADF)) and inelastic spectroscopic signals (electron energy loss (EELS) or energy-dispersive x-ray (EDX)). By linking these simultaneously acquired signals, or modalities, the chemical distribution within nanomaterials can be imaged at significantly lower doses with existing detector hardware. In many cases, the dose requirements can be reduced by over one order of magnitude. This high SNR recovery of chemistry is tested against simulated and experimental atomic resolution data of heterogeneous nanomaterials.
36 MATERIALS SCIENCE↗
Living Filter Designs for In-Line Recovery and Sorting of Critical materials
This project explored “bio-mining” of critical materials from electronic waste (E-waste) streams by developing living filters arrays capable of recovering these materials, focusing on the platinum group metals (PGMs) and rare earth elements (REEs). While highly toxic, E-waste is considered a valuable “urban mine” as it contains critical materials such as PGMs and REEs with orders of magnitude higher purity than the richest ores. The aim of the project was to: (1) develop mechanically robust, silk-based biomaterial filtration membranes that can capture REEs from dilute aqueous waste; (2) design and build 3D bioprinted living filters containing encapsulated electrochemically active bacteria (EAB) capable of bio-reducing PGMs and recovering them from waste streams; and (3) constructing combined living filter arrays using both components to efficiently capture REE and PGM from the same waste stream. The developed silk-based filtration membranes were self-assembled using silk-nanofibrils (SNFs) derived from silkworm (Bombyx mori) cocoons in conjunction with recombinant silk-elastin-like proteins (SELPs), which contained lanthanide-binding peptide tags (LBTs) with a high affinity and specificity towards REEs. These 100% biodegradable protein-based membranes were capable of recovering up to 85% of model REE ions (Tb 3+ ) filtered through the membrane, with ~50% recovery achieved in the presence of high concentrations (100X) of common interfering metals (Ca 2+ , Cu 2+ , Fe 3+ , Zn 2+ ). REE captured by the membranes were easily recovered by applying a low pH desorption buffer. The membranes also demonstrated substantial reusability, with only a 30% loss in binding capacity after 4 cycles of REE binding and recovery. To recover the PGMs, we created a bottom-up assembling strategy to construct a living hydrogel composed of a seamlessly integrated living catalyst, Shewanella loihica PV-4 (PV-4), for metal reduction, and their structural and functional linkers, bio-reduced graphene oxide (B-rGO). This hydrogel demonstrated a close to 90% recovery of model metal ions, Pd, from a simulated e-waste leaching stream with minimum-to-no biomass production. It’s also worth noting that the Pd recovery is initiated immediately after the introduction of living hydrogel, compared to conventional biocarriers that required start-up times within hours to days. Overall, these living hydrogels demonstrated superior bioactivity, structural integrity, and agility over existing biocarriers, which offers extensive opportunities to advance the biological metal recovery with unparallel efficiency, reduced energy/material consumption, and minimal environmental impact.
36 MATERIALS SCIENCE↗