Search NASA⌕ Search

SEARCH · Search NASA

Results for “MHD modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

UNR Grant Proposal Contribution

The work of Carrier et. al. (citation needed for Matt’s effect of surface roughness on phase transitions/ETI paper) demonstrates that 1D and 2D resistive magnetohydrodynamic (MHD) simulations can reliably model exploding aluminum rods driven by megaampere currents. Close agreement between simulation results and photonic Doppler velocimetry data from the Mykonos electrothermal instability (METI-II) campaign builds confidence in predictive modelling capabilities for pulsed-power HED experiments. Furthermore, 2D MHD simulations show how machined features and micro-scale surface roughness can seed the electrothermal instability (ETI). Surface roughness was observed to reduce the time of melt by 19%, with ETI growth driving the enhanced heating of the rod surface.

36 MATERIALS SCIENCE↗
DOE OSTI2021

On the study of hydrodynamic instabilities in the presence of background magnetic fields in high-energy-density plasmas

Blast-wave-driven hydrodynamic instabilities are studied in the presence of a background B-field through experiments and simulations in the high-energy-density (HED) physics regime. In experiments conducted at the Laboratoire pour l’utilisation des lasers intenses (LULI), a laser-driven shock-tube platform was used to generate a hydrodynamically unstable interface with a prescribed sinusoidal surface perturbation, and short-pulse x-ray radiography was used to characterize the instability growth with and without a 10-T B-field. The LULI experiments were modeled in FLASH using resistive and ideal magnetohydrodynamics (MHD), and comparing the experiments and simulations suggests that the Spitzer model implemented in FLASH is necessary and sufficient for modeling these planar systems. These results suggest insufficient amplification of the seed B-field, due to resistive diffusion, to alter the hydrodynamic behavior. Although the ideal-MHD simulations did not represent the experiments accurately, they suggest that similar HED systems with dynamic plasma-β (=2μ0ρv2/B2) values of less than ∼100 can reduce the growth of blast-wave-driven Rayleigh–Taylor instabilities. These findings validate the resistive-MHD FLASH modeling that is being used to design future experiments for studying B-field effects in HED plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Lagrangian particle model for 3D simulation of pellets and SPI fragments in tokamaks

A 3D numerical model for the ablation of pellets and shattered pellet injection (SPI) fragments in tokamaks in the plasma disruption mitigation and fueling parameter space has been developed based on the Lagrangian particle code [R. Samulyak, X. Wang, H.-S. Chen, Lagrangian Particle Method for Compressible Fluid Dynamics, J. Comput. Phys., 362 (2018), 1-19]. The pellet code implements the low magnetic Reynolds number MHD equations, kinetic models for the electronic heating, a pellet surface ablation model, an equation of state that supports multiple ionization states, radiation, and a model for grad-B drift of the ablated material across the magnetic field. The Lagrangian particle algorithm is highly adaptive, capable of simulating a large number of fragments in 3D while eliminating numerical difficulties of dealing with the tokamak background plasma. The code has achieved good agreement with theory for spherically symmetric ablation flows. Axisymmetric simulations of neon and deuterium pellets in magnetic fields ranging from 1 to 6 Tesla have been compared with previous simulations using the FronTier code, and very good agreement has also been obtained. Furthermore, the main physics contribution of the paper is a detailed study of the influence of 3D effects, in particular grad-B drift, on pellet ablation rates and properties of ablation clouds. Smaller reductions of ablation rates in magnetic fields compared to axially symmetric simulations have been demonstrated because the ablated material is not confined to narrowing channels in the presence of grad-B drift. Contribution of various factors in the grad-B drift model has also been quantified.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Potassium carbonate decomposition modeling within rotating detonation engines for direct power extraction applications

We report that recently, there has been a significant interest in detonation-based combustion systems, such as rotating detonation engines (RDE), due to potential performance advantages in propulsion and energy applications. This includes improvements in thermodynamic efficiency, inherently high gas velocities, and the possibility of achieving an increase in total pressure (i.e. pressure gain) through the combustion process. Due to approximating a constant volume combustion process, these devices also tend to exhibit extremely high local gas temperatures relative to a comparable constant pressure combustor. These advantages overlap well with desirable performance characteristics of direct power extraction (DPE) technologies, such as a magnetohydrodynamic (MHD) generator. Typically, in DPE systems hot combustion products are seeded with an easily ionizable material such as potassium carbonate (K 2 CO 3 ) in order to boost the electrical conductivity. However, due to the short gas residence times within an RDE, it was unclear whether forming an electrically conductive combustion plasma would be feasible for integration with a downstream MHD generator. A model is presented which describes the heating, decomposition, and ionization of solid K 2 CO 3 particles and aqueous solutions of K 2 CO 3 in water, for a given initial particle diameter. This model was combined with available computational fluid dynamics (CFD) data for an oxygen-methane RDE in a one-way coupled Eulerian-Lagrangian framework to predict particle trajectories and the corresponding heating, decomposition, and ionization histories. Electrical conductivities were computed using a previously developed model, and a method was proposed to determine an equivalent average electrical conductivity. Results show that particle sizes below ~30 µm are able to fully decompose before reaching the exit of the RDE. While the one-way coupled nature of the simulations precluded rigorous evaluation of the effects of seed material on detonability, a substantial temperature reduction is expected at the detonation wave front due to heating and decomposition. A preliminary comparison is presented between the RDE and an equivalent constant pressure adiabatic combustor, showing a potential performance advantage for the RDE.

42 ENGINEERING↗
DOE OSTI2022

Equilibrium reconstruction of DIII-D plasmas using predictive modeling of the pressure profile

New workflows have been developed for predictive modeling of magnetohydrodynamic (MHD) equilibrium in tokamak plasmas. The goal of this work is to predict the MHD equilibrium in tokamak discharges without having measurements of the kinetic profiles. The workflows include a cold start tool, which constructs all the profiles and power flows needed by transport codes; a Grad–Shafranov equilibrium solver; and various codes for the sources and sinks. For validation purposes, a database of DIII-D tokamak discharges has been constructed that is comprised of scans in the plasma current, toroidal magnetic field, and triangularity. Initial efforts focused on developing a workflow utilizing an empirically derived pressure model tuned to DIII-D discharges with monotonic safety factor profiles. This workflow shows good agreement with experimental kinetic equilibrium calculations, but is limited in that it is a single fluid (equal ion and electron temperatures) model and lacks H-mode pedestal predictions. The best agreement with the H-mode database is obtained using a theory-based workflow utilizing pressure profile predictions from a coupled TGLF turbulent transport and EPED pedestal models together with external magnetics and Motional Stark Effect (MSE) data to construct the equilibrium. Here, we obtain an average root mean square error of 5.1% in the safety factor profile when comparing the predicted and experimental kinetic equilibrium. We also find good agreement with the plasma stored energy, internal inductance, and pressure profiles. Including MSE data in the theory-based workflow results in noticeably improved agreement with the q-profiles in high triangularity discharges in comparison with the results obtained with magnetic data only. The predictive equilibrium workflow is expected to have wide applications in experimental planning, between-shot analysis, and reactor studies.

Kinsey, J. E. (ORCID:0000000193347473)↗
DOE OSTI2021

Magnetic-Confinement Fusion—Plasma Theory: Tokamak Magnetohydrodynamic Equilibrium and Stability

Magnetohydrodynamics (MHD) provides a useful model to describe the crucial plasma macroscopic equilibrium and stability behaviors in toroidal tokamak devices by considering the plasma as a conducting fluid interacting with a surrounding confining electromagnetic field. MHD is the most basic plasma model, incorporating most large-scale phenomena, including plasma equilibrium and all major instabilities. MHD equations are obtained by taking moments of the Boltzmann equations for different plasma species. They provide a set of comprehensive physics constrains to compute and optimize the equilibrium plasma shape and pressure and current profiles that are critical to its stability and performance. In the ideal case, the equations have special properties that lead to efficient numerical calculation schemes, the most important of which is the ideal MHD energy principle for linear stability against small departures from equilibrium. In a tokamak plasma, equilibrium pressure is mostly destabilizing for MHD modes, whereas equilibrium current is also often a major driving force. Plasma resistivity creates new freedom for a MHD instability to grow, but there are also cases where the plasma resistivity plays a stabilizing role. Equilibrium toroidal flow and/or flow shear can affect MHD instabilities. Principal MHD instabilities include the internal kink mode, sawtooth, fishbone, external kink, resistive wall mode, resistive interchange, tearing and neoclassical tearing modes (NTMs), locked modes, toroidal Alfven eigenmodes (TAEs), and edge localized modes (ELMs). Fast-growing MHD instabilities can lead to an abrupt plasma disruption and termination that can potentially damage the device plasma facing components (PFCs) and in-vessel structures. Furthermore, an important MHD application is to develop robust techniques to mitigate and control MHD instabilities.

Dispersive pellet injection↗
DOE OSTI2021

Excitation of fishbone-like mode in tokamaks due to bounce resonances of trapped thermal ions

When the drift kinetic effect of thermal ions is taken into account, a high-frequency fishbone-like mode (FLM) is found to be driven unstable by trapped thermal ions (TTIs) in tokamak plasmas, according to self-consistent magneto-hydrodynamic (MHD)-kinetic hybrid modeling utilizing the MARS-K code [Liu et al., Phys. Plasmas 15, 112503 (2008)] as well as an analytic theory. It is found that, similar to energetic particles, TTIs can also stabilize the internal kink mode, whereas the FLM is excited when the effective beta of TTIs exceeds a threshold value. The real frequency of the FLM is comparable to the bounce frequency of TTIs. The mode structure of the FLM can be significantly different from the conventional step-like function for the associated plasma radial displacement. This drift kinetic induced modification of the mode structure near the q = 1 surface is captured by non-perturbative MHD-kinetic hybrid computations with MARS-K. Furthermore, the FLM can only be triggered by TTIs at sufficiently high thermal temperatures. Both the FLM and the internal kink can be stabilized by sufficiently fast plasma toroidal rotation and parallel sound wave damping. These two conditions of high thermal temperature and (fast) flow stabilization, though making it challenging to observe the TTI-driven FLM in present day experiments, are favorable for the mode excitation in future reactor scale devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Simulation Models for Exploring Magnetic Reconnection

Simulations have played a critical role in the advancement of our knowledge of magnetic reconnection. However, due to the inherently multiscale nature of reconnection, it is impossible to simulate all physics at all scales. For this reason, a wide range of simulation methods have been crafted to study particular aspects and consequences of magnetic reconnection. This article reviews many of these methods, laying out critical assumptions, numerical techniques, and giving examples of scientific results. Plasma models described include magnetohydrodynamics (MHD), Hall MHD, Hybrid, kinetic particle-in-cell (PIC), kinetic Vlasov, Fluid models with embedded PIC, Fluid models with direct feedback from energetic populations, and the Rice Convection Model (RCM).

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Validation of Simulation Models for Wall-Connected Scrape off Layer Currents during MHD Activity in the HBT-EP Tokamak

This is the final report for the DOE award DE-SC0021657, titled “Validation of Simulation Models for Wall-Connected Scrape off Layer Currents during MHD Activity in the HBT-EP Tokamak” for the period September 1, 2020 – April 30, 2025. This award is part of a broader collaborative project, which supported training of a PhD student at Columbia University under the joint supervision of Dr. Levesque and Dr. Hansen (on award DE-SC0021325). The award supported research into computational models for plasma and 3D conducting structures in the vicinity relevant to tokamak disruptions and other mode activity (eg. RWMs) using the NIMROD and PSI-Tet codes. Additional detail on progress in support of these tasks is provided below.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Validation of Simulation Models for Wall-Connected Scrape off Layer Currents during MHD Activity in the HBT-EP Tokamak (Final Report)

This is the final report for the DOE award DE-SC0021325, titled “Validation of Simulation Models for Wall-Connected Scrape off Layer Currents during MHD Activity in the HBT-EP Tokamak” for the period September 1, 2020 – May 31, 2023. This award is part of a broader collaborative project, which supported training of a PhD student at Columbia University under the joint supervision of Dr. Hansen and Columbia project members. The award supported research into computational models for plasma and 3D conducting structures in the vicinity relevant to tokamak disruptions and other mode activity (eg. RWMs) using the NIMROD, and PSI-Tet, codes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Solar Energetic Proton Access to the Inner Magnetosphere During the September 7–8, 2017 Event

Here, the access of solar energetic protons into the inner magnetosphere on September 7–8, 2017 is investigated by following reversed proton trajectories to compute the proton cutoff energy using the Dartmouth geomagnetic cutoff code (Kress et al., 2010, https://doi.org/10.1029/2009sw000488). The cutoff energies for protons coming from the west and east direction, the minimum and maximum cutoff energy respectively, are calculated every 5 min along the orbit of Van Allen Probes using TS07 and the Lyon-Fedder-Mobarry (LFM) MHD magnetic field model. The result shows that the cutoff energy increases significantly as the radial distance decreases, and that the cutoff energy decreases with the building up of the ring current during magnetic storms. Solar wind dynamic pressure also affects cutoff suppression (Kress et al., 2004, https://doi.org/10.1029/2003gl018599). The LFM-RCM model shows stronger suppression of cutoff energy than TS07 during strong solar wind driving conditions. The simulation result is compared with proton flux measurements, showing consistent variation of the cutoff location during the September 7–8, 2017 geomagnetic storm.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

A comparative study of internal kink stability in EU DEMO designs with negative and positive triangularity

Abstract Internal kink (IK) instability is investigated for European demonstration fusion reactor (EU DEMO) plasmas in both negative triangularity (NT) and positive triangularity (PT) configurations. For NT plasmas, the IK becomes more unstable as an ideal conformal wall moves away from the plasma boundary, with the mode growth rate saturating at the wall radial location of about b / a = 1.5 , where a is the plasma minor radius and b the wall radial location. The plasma resistivity destabilizes the IK mode. The effect of sub-sonic toroidal plasma flow is sufficiently weak and can thus be ignored for these EU DEMO equilibria. These results are consistent with those for PT plasmas, albeit with larger mode growth rate in the NT configuration. Both perturbative and self-consistent magneto-hydrodynamic (MHD)-kinetic hybrid calculations predict (partial) stabilization of the IK modes in both NT and PT configurations, with inclusion of various kinetic contributions. Precessional drift motion of trapped fusion-born alphas in EU DEMO produces weak stabilization to the IK mode. Stronger stabilization occurs with the toroidal precession of trapped thermal particles (ions and electrons) and the bounce-transit motion of thermal ions. The stabilization is similar between the NT and PT configurations, due to the similarity of the mode eigenfunction (occupying a nearly circular region in the plasma core) despite the sign difference in the triangularity. The non-perturbative MHD-kinetic hybrid model predicts much less stabilization of the mode than the perturbative model, primarily due to the self-consistent determination of the mode eigenvalue in the former. Generally, no significant difference in the IK mode stability is found between the NT and PT plasmas in EU DEMO.

Physics↗
DOE OSTI2024

Influences of δB contribution and parallel inertial term of energetic particles on MHD-kinetic hybrid simulations: a case study of the 1/1 internal kink mode

The magnetohydrodynamic-kinetic (MHD-kinetic) hybrid model (Park et al 1992 Phys. Fluids B 4 2033–7) has been widely applied in studying energetic particles (EPs) problems in fusion plasmas for past decades. The pressure-coupling scheme or the current-coupling scheme is adopted in this model. However, two noteworthy issues arise in the model application: firstly, the coupled term introduced in the pressure-coupling scheme, (∇•P h ) ⟂ , is often simplified by ∇•P h , which is equivalent to neglecting the parallel inertial term of EPs; secondly, besides the $δf$ contribution caused by changing in the EP distribution function, the magnetic field perturbation (the $δB$ contribution) generated during development of the instabilities should also be considered, but it is often ignored in existing hybrid simulations. In this paper, we derive the analytical formulations under these two coupling schemes and then numerically study the representative case of the linear stability of the $m/n$ = $1/1$ internal kink mode (IKM) (Fu et al 2006 Phys. Plasmas 13 052517) by using the CLT-K code. Further, it is found that the approximated models can still yield reasonable results when EPs are isotopically distributed. But it fails completely in cases with anisotropic EP distributions. In addition, we further investigate the influence of EP's orbit width on the stability of IKM and verify the equivalence between pressure-coupling scheme and the current-coupling scheme.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Effects of equilibrium pressure on plasma response to RMPs in a spherical tokamak

This study presents a comprehensive analysis of the equilibrium pressure on the plasma response to resonant magnetic perturbations (RMPs) in the spherical tokamak (ST) MAST-U, employing both single-fluid and MHD-kinetic hybrid models (implemented via the MARS-F/K codes). As a key finding, the study identifies two different pressure-driven eigenmodes, exhibiting Sturmian property, that affect the Troyon no-wall limits for the onset of the n = 1 and n = 2 ( n is the toroidal mode number) ideal external kink instabilities as well as the corresponding plasma response to the applied RMP. With increasing equilibrium pressure, the plasma response to RMPs is significantly enhanced in the ST plasma, particularly in the high-pressure regime where kinetic effects strongly stabilize the external kink instability. The Troyon no-wall limit divides the plasma response into two regions: well below the limit, the response amplitudes and trends (versus pressure) are similar between the fluid and kinetic models; as the equilibrium pressure approaches the Troyon limit, the kinetic model predicts significant amplification of the RMP field, up to 30 times for cases considered. A relatively weak dependence of the optimal coil phasing on the equilibrium pressure is computed in this ST plasma, similar to the trend obtained for the conventional aspect ratio devices. These findings underscore the importance of incorporating kinetic effects in accurate prediction of the plasma response to RMPs in high-pressure ST tokamak plasmas and provide a theoretical basis for optimizing RMP-based control of the edge-localized modes in future ST devices.

RMP↗
DOE OSTI2022

Numerical studies on saturated kink and sawtooth induced fast ion transport in JET ITER-like plasmas

Here, this presentation examines the energetic particle transport induced by saturated kink modes and sawtooth crashes in JET deuterium plasmas. It is known that kink mode-resonant transport and phase-space redistribution from sawtooth crashes can drive strong fast ion transport with dependencies on particle pitch and energy. Measurements with JET's Faraday cup fast ion loss detector array have shown that the internal kink growth phase preceding sawtooth crashes produces substantial fast ion losses. This report will numerically investigate the dominant energetic particle transport mechanism with a detailed examination of the fast ion phase-space dependencies, resonances, orbit topology changes, induced losses, and redistribution associated with the long-lived, resonant, kink mode and non-resonant sawtooth crash. The ORBIT-kick model forms the basis of the transport studies with realistic fast ion distributions produced from TRANSP. A recently created reduced model for sawtooth induced transport is used while the saturated kink modes are modeled with ideal MHD codes. The simulations were further validated against experiment with a newly developed synthetic Faraday cup fast ion loss detector in addition to scintillator probe and neutron measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Experiments on excitation of Alfvén eigenmodes by alpha-particles with bump-on-tail distribution in JET DTE2 plasmas

Dedicated experiments were performed in JET DTE2 plasmas for obtaining an α-particle bump-on-tail (BOT) distribution aiming at exciting Alfvén eigenmodes (AEs). Neutral beam injection-only heating with modulated power was used so that fusion-born α-particles were the only ions present in the MeV energy range in these DT plasmas. The beam power modulation on a time scale shorter than the α-particle slowing down time was chosen for modulating the α-particle source and thus sustaining a BOT in the α-particle distribution. High-frequency modes in the toroidicity-induced Alfven eigenmode (TAE) frequency range and multiple short-lived modes in a wider frequency range have been detected in these DT discharges with interferometry, soft x-ray cameras, and reflectometry. The modes observed were localised close to the magnetic axis and were not seen in the Mirnov coils. Analysis with the TRANSP and Fokker-Planck FIDIT codes confirms that α-particle distributions with BOT in energy were achieved during some time intervals in these discharges though no clear correlation was found between the times of the high-frequency mode excitation and the BOT time intervals. The combined magneto-hydrodynamic (MHD) and kinetic modelling studies show that the high-frequency mode in the TAE frequency range is best fitted with a TAE of toroidal mode number n= 9. This mode is driven mostly by the on-axis beam ions while the smaller drive due to the pressure gradient of α-particles allows overcoming the marginal stability and exciting the mode. The observed multiple short-lived modes in a wider frequency range are identified as the on-axis kinetic AEs predicted in Rosenbluth and Rutherford.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Radiation modeling and experimental validation of sub-cyclotron frequency microwave synchrotron radiation as a diagnostic tool for runaway electrons in present and future tokamaks

The microwave synchrotron radiation in the sub-cyclotron frequency region has been systematically validated as a diagnostic method for runaway electrons (>1 MeV) with radiation modeling and experiments on the DIII-D tokamak. Experimental observations reveal that sub-cyclotron frequency microwave radiation emerges only after runaway electrons are excited during plasma disruptions. Electron gyro-magnetic radiation modeling confirms that only runaway electrons with energies exceeding 1 MeV can emit radiation in the observed sub-cyclotron frequency band on DIII-D. The synchrotron Razin and Beaming effects are modeled in both the sub-cyclotron and standard Electron Cyclotron Emission (ECE) frequency region. Due to the pronounced beaming effect, the modeling supports that a standard ECE system is insensitive to synchrotron radiation from beamed runaway electrons (p ∥ >> p ⟂ ), but very sensitive to ECE radiation from isotropic suprathermal electrons (100 keV or less). DIII-D experiments further show that combining ECE and sub-cyclotron receivers reveals new insights into transient runaway dynamics during the plateau phase. Certain transient crash events appear only in the sub-cyclotron band or lead to opposite changes on the sub-cyclotron and standard ECE signals, supporting models where transient MHD events can exert a different effect on electrons of different energy levels. This novel diagnostic technique offers a powerful tool for studying and detecting runaway electron dynamics in both present-day and high-field future tokamaks. The diagnostic approach has been extrapolated to the SPARC tokamak, where sub-cyclotron radiation is predicted to respond sensitively and solely to runaway electrons during SPARC’s L-mode startup phase.

Yu, Guanying [Hefei Comprehensive National Science↗
DOE OSTI2021

Gyrokinetic and extended-MHD simulations of a flow shear stabilized Z-pinch experiment

Axisymmetric (m = 0) gyrokinetic and extended-MHD simulations of a sheared-flow Z-pinch plasma are performed with the high-order finite volume code COGENT. The present gyrokinetic model solves the long-wavelength limit of the gyrokinetic equation for both ion and electron species coupled to the electrostatic gyro-Poisson equation for the electrostatic potential. The extended-MHD model is electromagnetic and includes the effects of the gyro-viscous pressure tensor, diamagnetic electron and ion heat fluxes, and generalized Ohm's law. Additionally, a prominent feature of this work is that the radial profiles for the plasma density and temperature are taken from the fusion Z-pinch experiment (FuZE), and the magnetic field profile is obtained as a solution of the MHD force balance equation. Such an approach allows to address realistic plasma parameters and provide insights into the current and planned experiments. In particular, it is demonstrated that the radial profiles play an important role in stabilization, as the embedded guiding center (E×B ) drift has a strong radial shear, which can contribute to the Z-pinch stabilization even in the absence of the fluid flow shear. The results of simulations for the FuZE plasma parameters show a decrease in the linear growth rate with an increase in the flow shear; however, full stabilization in the linear regime is not observed even for large (comparable to the Alfvén velocity) radial variations of the axial flow. Nonlinear stability properties of the FuZE plasmas are also studied, and it is found that profile broadening can have a pronounced stabilizing effect in the nonlinear regime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗