SEARCH · Search NASA

Results for “MST”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

All sources NASA NTRS DOE OSTI

NASA NTRS1978

Stratospheric composition balloon, aircraft and rocket-borne experiments, 28-30 September 1977 (systems, instruments, trajectories, supporting measurements)

The STRATCOM (STRATospheric COMposition) is a long term multipurpose program for integrated, correlated measurements of stratospheric parameters related to composition, thermodynamics, and radiative balance. Balloon 8-b, carrying a solar-pointing grating infrared spectrometer, two CO2 thermal emission radiometers and two in-situ air temperature sensors was launched at 1251 MST on 28 September 1977 to float at an altitude of 39 km from 1521 MST with the instruments making measurements at that altitude through the time of sunset at 1822 MST. Balloon 8-a lifted a payload consisting of four UV filter photometers, two UV spectrometers, two chemiluminescent ozonesondes, dasibi ozone monitor, 14 tube cryogenic sampler, two aluminum oxide H2O sensors, four air temperature sensors, atmospheric pressure sensor, infrared and visible pyranometers, downward-looking camera, blunt-kryton lamp-Gerdien condenser probe, three component anemometer, balloon apex-plate payload and three parachute-borne dropsondes.

Ballard, H. N.↗

NASA NTRS1983

Middle Atmosphere Program. Handbook for MAP, volume 9

The term Mesosphere-Stratosphere-Troposphere radar (MST) was invented to describe the use of a high power radar transmitter together with a large vertically, or near vertically, pointing antenna to study the dynamics and structure of the atmosphere from about 10 to 100 km, using the very weak coherently scattered radiation returned from small scale irregularities in refractive index. Nine topics were addressed including: meteorological and dynamic requirements for MST radar networks; interpretation of radar returns for clear air; techniques for the measurement of horizontal and vertical velocities; techniques for studying gravity waves and turbulence; capabilities and limitations of existing MST radar; design considerations for high power VHF radar transceivers; optimum radar antenna configurations; and data analysis techniques.

Bowhill, S. A.↗

NASA NTRS1984

Synoptic-scale dynamics with vertical velocity, part 1.8A

Radar measurements of all three of the atmospheric velocity components by the MST technique data from all the pioneering work of Woodman and Geillen (1974). The radar horizontal velocities have been compared with other standard measurements, such as radiosonde winds, in a number of studies and are now finding widespread acceptance within the meteorological community for research and operational forecasting purposes. Perhaps the single most interesting report recently is that the mesosphere-stratosphere-troposphere (MST) profiler winds are turning out to be one of the most useful pieces of data for predicting upslope snowfall in the cold season forecasting study of the PROFS Program (Reynolds, 1983). By contrast, the vertical velocities measured by MST radars have received relatively little attention, despite the facts that direct continuous measurement of vertical velocity is unique (i.e., it cannot be done with radiosondes) and that the vertical velocity is intimately linked with the dynamics of the atmosphere. Indeed, for many forecasting applications the vertical velocity is the single most important variable, yet it is usually inferred indirectly from other dynamical variables. The stratosphere-troposphere (ST) radars now available have the potential to change this situation. Some of the results from vertical velocity measurements which have direct application in synoptic scale dynamics.

Nastrom, G. D.↗

NASA NTRS1984

Data base management: MSTRAC (keynote paper), part 8

Technical Aspects of MST radars were discussed. The name of the group is MST Radar Coordination (MSTRAC). The geophysical parameters to be included in the sample data tapes were determined. It was suggested that MSTRAC compile a catalog of existing data at each of the facilities. It is found that: (1) there is a community of interested users for MST data; (2) the initial responses from observatories indicates that interest in MSTRAC is not overwhelming, probably because of time involved; and (3) the program needs reassessment.

Avery, S. K.↗

NASA NTRS1994

Detection of stratosphere troposphere exchange in cut-off low systems

The Aberystwyth MST radar has been used as part of the TOASTE program to study the structure of the tropopause in cut-off-low system with an aim to identifying regions where stratosphere-troposphere exchange are taking place. Theory predicts that the vertical gradient in reflected power is proportional to the static stability of the reflecting region, and should therefore resolve tropopause structure. Comparisons of MST power profiles with radiosonde data are presented and show good agreement, revealing regions of indefinite tropopauses, where stratosphere-troposphere exchange is thought to take place. The continuous nature of MST data allows an estimation of the size of these regions.

Price, Jeremy D.↗

NASA NTRS2002

A Facility and Architecture for Autonomy Research

Autonomy is a key enabling factor in the advancement of the remote robotic exploration. There is currently a large gap between autonomy software at the research level and software that is ready for insertion into near-term space missions. The Mission Simulation Facility (MST) will bridge this gap by providing a simulation framework and suite of simulation tools to support research in autonomy for remote exploration. This system will allow developers of autonomy software to test their models in a high-fidelity simulation and evaluate their system's performance against a set of integrated, standardized simulations. The Mission Simulation ToolKit (MST) uses a distributed architecture with a communication layer that is built on top of the standardized High Level Architecture (HLA). This architecture enables the use of existing high fidelity models, allows mixing simulation components from various computing platforms and enforces the use of a standardized high-level interface among components. The components needed to achieve a realistic simulation can be grouped into four categories: environment generation (terrain, environmental features), robotic platform behavior (robot dynamics), instrument models (camera/spectrometer/etc.), and data analysis. The MST will provide basic components in these areas but allows users to plug-in easily any refined model by means of a communication protocol. Finally, a description file defines the robot and environment parameters for easy configuration and ensures that all the simulation models share the same information.

Pisanich, Greg↗

NASA NTRSDate not supplied

Evaluation of Finite Impulse Response Filters for Turbulence Effects on Sonic Booms

Turbulence effects on sonic booms lead to random variability of sonic boom waveforms measured on the ground, complicating the prediction of such waveforms using sonic boom propagation codes that do not account for turbulence effects. The NASA PCBoom software is one such code shown to accurately predict sonic booms above the atmospheric boundary layer but not those on the ground. Analyses of measured sonic booms show that, on average, the turbulence effects result in sonic boom loudness reduction, on average, that increases with propagation distance and turbulence strength. To efficiently account for such effects, a signal processing-based approach has been developed at NASA using finite impulse response filters derived from predicted waveforms by solving a nonlinear parabolic equation. Analyses indicate that the mean loudness reduction obtained using the filters does not increase with propagation distance or with increasing turbulence strength, in disagreement with flight test data. An alternative approach to the filters is currently under development employing the multiple scattering theory (MST) of wave propagation. Available results from the physics-based MST approach are used to evaluate the predictive capability of the filters, suggesting that the filters can severely underestimate the prediction of the MST approach.

sonic booms↗

NASA NTRSDate not supplied

Evaluation of Finite Impulse Response Filters for Turbulence Effects on Sonic Booms

sonic booms↗

DOE OSTI2023

Modeling aqueous association constants and mineral solubilities at subcritical and supercritical temperatures

The need for sustainable power generation has increased interest in the use of hydrothermal fluids for industrial applications. New high-enthalpy geothermal systems and biowaste-to-fuel processes are two relevant examples that employ supercritical fluids which require an in-depth understanding of complex chemical reactions occurring near the supercritical temperature of water (374 °C). As these processes operate in thermodynamic regimes that are not currently covered by a standard molar Gibbs energy of formation model, only empirical fits for single reaction systems are available which limit the use of multi-component phase equilibria calculations that are standard practice for less extreme environments. Here, in this paper, we advance a standard molar Gibbs energy of formation model able to operate in these otherwise inaccessible thermodynamic states to include species needed for key mineral solubility systems and ion association reactions. This work extends a model based on molecular statistical thermodynamics (MST) into four new systems (Na 3 PO 4 -H 2 O, LiOH-H 2 O, KOH-H 2 O, and BaSO 4 -H 2 O) by extending the model to cover 10 new species. For each of these systems, model predictions were consistently within the experimental uncertainties for the new systems covered. A breakdown of MST contributions to the model revealed that electrostatic and hard sphere contributions were key to reproducing density dependencies of standard molar Gibbs energy of formation values around the critical point of water.

42 ENGINEERING↗

DOE OSTI2022

Multimodal quantification of degradation pathways during extreme fast charging of lithium-ion batteries

Enabling fast charging of Li-ion batteries will be a key step towards realizing the technology's full potential in electric vehicles. Currently, fast charging is limited by a variety of processes that reduce cell capacity upon extended cycling. Using a multimodal approach combining incremental capacity analysis (dQ/dV), high energy X-ray diffraction (HEXRD), and mass spectrometry titration (MST), we identify specific degradation mechanisms—including Li plating, dead Li x C 6 formation, Li 2 C 2 formation, solid carbonate solid-electrolyte interphase (SEI) deposition, and loss of positive electrode active material (LAM PE )—that occur during extended fast charge cycling. We find that Li plating is the major source of capacity loss in cells cycled at 6C, while non-carbonate SEI species deposition on the graphite anode is the main source of capacity loss when cycled at 4C. We also study local degradative phenomena by examining specific ~1–5 cm 2 regions of the cells using HEXRD and MST. Here, we find that plated Li is often collocated with dead Li x C 6 , Li 2 C 2 , and solid carbonate SEI species, and these additional species cumulatively account for ~20% of the capacity lost during 6C cycling. Finally, in a cell with an anomalously high amount of LAM PE (quantified via dQ/dV), we find that regions of cathode degradation were accompanied by non-carbonate SEI products on the adjacent region of the anode. We postulate that this phenomenon arises due to crosstalk between the electrodes, wherein soluble electrolyte oxidation products formed at the delithiated cathode migrate to the graphite anode and are ultimately deposited on the graphite surface. This work demonstrates the utility of combining multiple characterization techniques to reveal a more holistic understanding of degradative phenomena that occur across multiple length scales during fast charge.

25 ENERGY STORAGE↗

DOE OSTI2020

Enhanced magnetization in proton irradiated Mn 3 Si 2 Te 6 van der Waals crystals

van der Waals (vdW) engineering of magnetism is a topic of increasing research interest in the community at present. We study themagnetic properties of quasi-two-dimensional layered vdW Mn 3 Si 2 Te 6 (MST) crystals upon proton irradiation as a function of fluences of 1 × 10 15 , 5 ×10 15 , 1 × 10 16 , and 1 × 10 18 H⁺/cm 2 . We find that the magnetization is significantly enhanced by 53% and 37% in the ferrimagnetic phase (at 50 K) when the MST crystal was irradiated with the proton fluence of 5 ×10 15 , both in ab and c planes, respectively.The ferrimagnetic ordering temperature and magnetic anisotropy are retained even after proton irradiation. From the fluence dependence of magnetization, electron paramagnetic resonance spectral parameters (g-value and signal width), and Raman data, we show that the magnetic exchange interactions (Mn–Te–Mn) are significantly modified at this fluence. This work shows that it is possible to employ protonirradiation in tuning the magnetic properties of vdW crystals and provide many opportunities to design desired magnetic phases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2020

Quantification of MagLIF morphology using the Mallat scattering transformation

The morphology of the stagnated plasma resulting from magnetized liner inertial fusion is measured by imaging the self-emission x rays coming from the multi-keV plasma. Equivalent diagnostic responses can be generated by integrated radiation-magnetohydrodynamic (rad-MHD) simulations from programs such as HYDRA and GORGON. There have been only limited quantitative ways to compare the image morphology, that is the texture, of simulations and experiments. We have developed a metric of image morphology based on the Mallat scattering transformation (MST), a transformation that has proved to be effective at distinguishing textures, sounds, and written characters. This metric is designed, demonstrated, and refined by classifying ensembles (i.e., classes) of synthetic stagnation images and by regressing an ensemble of synthetic stagnation images to the morphology (i.e., model) parameters used to generate the synthetic images. We use this metric to quantitatively compare simulations to experimental images, experimental images to each other, and to estimate the morphological parameters of the experimental images with uncertainty. This coordinate space has proved to be very adept at doing a sophisticated relative background subtraction in the MST space. This was needed to compare the experimental self-emission images to the rad-MHD simulation images.

Glinsky, Michael E. (ORCID:0000000324933326)↗

DOE OSTI2021

Robust analysis of space-, time-, and energy-resolved soft x-ray measurements of magnetically confined fusion plasmas (invited)

A novel compact multi-energy soft x-ray (ME-SXR) diagnostic based on the PILATUS3 100K x-ray detector has been developed in collaboration between the Princeton Plasma Physics Laboratory and the University of Wisconsin-Madison and tested on the Madison Symmetric Torus (MST) reversed-field pinch. This solid-state photon-counting detector consists of a two-dimensional array of ~100 000 pixels for which the lower photon absorption cutoff energy can be independently set, allowing it to be configured for a unique combination of simultaneous spatial, spectral, and temporal resolution of ~1 cm, 100 eV, and 500 Hz, respectively. The diagnostic is highly versatile and can be readily adapted to diverse plasma operating conditions and scientific needs without any required downtime. New results from improved-confinement and quasi-single helicity plasmas in the MST demonstrate how the detector can be applied to study multiple aspects of the evolution of magnetically confined fusion-grade plasmas. These include observing the evolution of thermal emissivity, characterizing the energy of mid-Z excitation lines, extracting the T e profile, and observing the evolution of non-thermal populations. A technique for integrating the ME-SXR diagnostic into an integrated data analysis framework based on Bayesian inference is also presented. As a result, this allows ME-SXR measurements to be combined with data for complementary diagnostics in order to simultaneously infer Te and nZ from all available information.

47 OTHER INSTRUMENTATION↗

DOE OSTI2021

Microcalorimeter measurement of x-ray spectra from a high-temperature magnetically confined plasma

A NASA-built x-ray microcalorimeter spectrometer has been installed on the MST facility at the Wisconsin Plasma Physics Laboratory and has recorded x-ray photons emitted by impurity ions of aluminum in a majority deuterium plasma. Much of the x-ray microcalorimeter development has been driven by the needs of astrophysics missions, where imaging arrays with few-eV spectral resolution are required. The goal of our project is to adapt these single-photon-counting microcalorimeters for magnetic fusion energy research and demonstrate the value of such measurements for fusion science. Microcalorimeter spectrometers combine the best characteristics of the x-ray instrumentation currently available on fusion devices: high spectral resolution similar to an x-ray crystal spectrometer and the broadband coverage of an x-ray pulse height analysis system. Fusion experiments are increasingly employing high-Z plasma-facing components and require measurement of the concentration of all impurity ion species in the plasma. This diagnostic has the capability to satisfy this need for multi-species impurity ion data and will also contribute to measurements of impurity ion temperature and flow velocity, Zeff, and electron density. Here, we introduce x-ray microcalorimeter detectors and discuss the diagnostic capability for magnetic fusion energy experiments. We describe our experimental setup and spectrometer operation approach at MST, and we present the results from an initial measurement campaign.

Eckart, M. E. (ORCID:0000000338945889)↗

DOE OSTI2024

An octahedral Mach B-dot probe for 3D flows and magnetic fields in the edge of reversed field pinches

Measurements and simulations show that plasma relaxation processes in the reversed field pinch drive and redistribute both magnetic flux and momentum. To examine this relaxation process, a new 3D Mach B-dot probe has been constructed. This probe collects ion saturation currents through six molybdenum electrodes arranged on the flattened vertices of an octahedron made of boron nitride (BN). The ion saturation current flows through configurable voltage dividers for measurement and returns through one of six selectable return electrodes equally spaced along the 12 cm BN probe arm. In addition, the probe arm houses three B-dot magnetic pickup coils in the BN stalk immediately below to the octahedron, to measure the local magnetic field. Inserted in the Madison Symmetric Torus (MST) during deuterium discharges with 220 kA plasma current, density of 0.8 × 10 13 cm –3 , the probe collects ion saturation currents with sawtooth-like peaks correlated with relaxation events. This compact octahedral design fitting six Mach electrode surfaces within a 1 cm3 cube will enable future multi-point, multi-field probes compatible with the 1.5 in. ports of MST. Such probes will allow for flow circulation, current, and canonical vorticity to be calculated in the center of the finite difference stencil formed by the measurement locations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Global linear and nonlinear gyrokinetic simulations of tearing modes

Abstract To better understand multi-scale interactions between global tearing modes and microturbulence in the Madison Symmetric Torus (MST) reversed-field pinch (RFP), the global gyrokinetic code Gene is modified to describe global tearing mode instability via a shifted Maxwellian (SM) distribution consistent with experimental equilibria. The implementation of the SM is tested and benchmarked by comparisons with different codes and models. Good agreement is obtained in code-code and code-theory comparisons. Linear stability of tearing modes of a non-reversed MST discharge is studied. A collisionality scan is performed to the lowest order unstable modes ( n = 5, n = 6) and shown to behave consistently with theoretical scaling. The nonlinear evolution is simulated, and saturation is found to arise from mode coupling and transfer of energy from the most unstable tearing mode to small-scale stable modes mediated by the m = 2 tearing mode. The work described herein lays the foundation for nonlinear simulation and analysis of the interaction of tearing modes and gyroradius-scale instabilities in RFP plasmas.

Physics↗

DOE OSTI2025

Correcting for Selection Biases in the Determination of the Hubble Constant from Time-Delay Cosmography

The time delay between multiple images of strongly lensed quasars has been used to infer the Hubble constant. The primary systematic uncertainty for time-delay cosmography is the mass-sheet transform (MST), which preserves the lensing observables while altering the inferred ⁠H 0 . The TDCOSMO collaboration used velocity dispersion measurements of lensed quasars and lensed galaxies to infer that mass sheets are present, which decrease the inferred H 0 by 8 per cent. Here, we test the assumption that the density profiles of galaxy–galaxy and galaxy–quasar lenses are the same. We use a composite star-plus-dark-matter mass profile for the parent deflector population and model the selection function for galaxy–galaxy and galaxy–quasar lenses. We find that a power-law density profile with an MST is a good approximation to a two-component mass profile around the Einstein radius, but we find that galaxy–galaxy lenses have systematically higher mass-sheet components than galaxy–quasar lenses. For individual systems, λ int correlates with the ratio of the half-light radius and Einstein radius of the lens. By propagating these results through the TDCOSMO hierarchical inference code, we find that H 0 is lowered by a further 3 per cent. Using a more recent measurement of velocity dispersions and our fiducial model for selection biases, we infer H 0 = 66 ± 4 (stat) ± 1 (model sys) ± 2 (measurement sys) km s -1 Mpc -1 for the TDCOSMO plus SLACS data set. The first residual systematic error is due to plausible alternative choices in modelling the selection function, and the second is an estimate of the remaining systematic error in the measurement of velocity dispersions for SLACS lenses. Accurate time-delay cosmography requires precise velocity dispersion measurements and accurate calibration of selection biases.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2021

Defect-driven ferrimagnetism and hidden magnetization in MnBi 2 Te 4

MnBi 2 Te 4 (MBT) materials are promising antiferromagnetic topological insulators in which field-driven ferromagnetism is predicted to cause a transition between axion insulator and Weyl semimetallic states. However, the presence of antiferromagnetic coupling between Mn/Bi antisite defects and the main Mn layer can reduce the low-field magnetization, and it has been shown that such defects are more prevalent in the structurally identical magnetic insulator MnSb 2 Te 4 (MST). We use high-field magnetization measurements to show that the magnetization of MBT and MST occur in stages and full saturation requires fields of ~60 T. As a consequence, the low-field magnetization plateau state in MBT, where many determinations of the quantum anomalous Hall state are studied, actually consists of ferrimagnetic septuple blocks containing both uniform and staggered magnetization components.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗