Polar magnetic disturbances and the interplanetary magnetic field
IMP measurements on interplanetary magnetic field production of high latitude geomagnetic disturbances
GEOMAGNETIC EFFECT↗
SEARCH · Search NASA
Results for “Magnetic Field Measurements”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Lunar electrical conductivity, permeability and temperature from Apollo magnetometer experiments
Magnetometers were deployed at four Apollo sites on the moon to measure remanent and induced lunar magnetic fields. Measurements from this network of instruments were used to calculate the electrical conductivity, temperature, magnetic permeability, and iron abundance of the lunar interior. The measured lunar remanent fields range from 3 gammas minimum at the Apollo 15 site to 327 gammas maximum at the Apollo 16 site. Simultaneous magnetic field and solar plasma pressure measurements show that the remanent fields at the Apollo 12 and 16 sites interact with, and are compressed by, the solar wind. Remanent fields at Apollo 12 and Apollo 16 are increased 16 gammas and 32 gammas, respectively, by a solar plasma bulk pressure increase of 1.5 X 10 to the -7th power dynes/sq cm. Global lunar fields due to eddy currents, induced in the lunar interior by magnetic transients, were analyzed to calculate an electrical conductivity profile for the moon. From nightside magnetometer data in the solar wind it was found that deeper than 170 km into the moon the conductivity rises from .0003 mhos/m to .10 mhos/m at 100 km depth. Recent analysis of data obtained in the geomagnetic tail, in regions free of complicating plasma effects, yields results consistent with nightside values.
Dyal, P.↗
Report of the panel on geopotential fields: Magnetic field, section 9
The objective of the NASA Geodynamics program for magnetic field measurements is to study the physical state, processes and evolution of the Earth and its environment via interpretation of measurements of the near Earth magnetic field in conjunction with other geophysical data. The fields measured derive from sources in the core, the lithosphere, the ionosphere, and the magnetosphere. Panel recommendations include initiation of multi-decade long continuous scalar and vector measurements of the Earth's magnetic field by launching a five year satellite mission to measure the field to about 1 nT accuracy, improvement of our resolution of the lithographic component of the field by developing a low altitude satellite mission, and support of theoretical studies and continuing analysis of data to better understand the source physics and improve the modeling capabilities for different source regions.
Achache, Jose J.↗
Crustal evolution inferred from Apollo magnetic measurements
Magnetic field and solar wind plasma density measurements were analyzed to determine the scale size characteristics of remanent fields at the Apollo 12, 15, and 16 landing sites. Theoretical model calculations of the field-plasma interaction, involving diffusion of the remanent field into the solar plasma, were compared to the data. The information provided by all these experiments shows that remanent fields over most of the lunar surface are characterized by spatial variations as small as a few kilometers. Large regions (50 to 100 km) of the lunar crust were probably uniformly magnetized during early crustal evolution. Bombardment and subsequent gardening of the upper layers of these magnetized regions left randomly oriented, smaller scale (5 to 10 km) magnetic sources close to the surface. The larger scale size fields of magnitude approximately 0.1 gammas are measured by the orbiting subsatellite experiments and the small scale sized remanent fields of magnitude approximately 100 gammas are measured by the surface experiments.
Dyal, P.↗
Magnetic-Field-Response Measurement-Acquisition System
A measurement-acquisition system uses magnetic fields to power sensors and to acquire measurements from sensors. The system alleviates many shortcomings of traditional measurement-acquisition systems, which include a finite number of measurement channels, weight penalty associated with wires, use limited to a single type of measurement, wire degradation due to wear or chemical decay, and the logistics needed to add new sensors. Eliminating wiring for acquiring measurements can alleviate potential hazards associated with wires, such as damaged wires becoming ignition sources due to arcing. The sensors are designed as electrically passive inductive-capacitive or passive inductive-capacitive-resistive circuits that produce magnetic-field-responses. One or more electrical parameters (inductance, capacitance, and resistance) of each sensor can be variable and corresponds to a measured physical state of interest. The magnetic-field- response attributes (frequency, amplitude, and bandwidth) of the inductor correspond to the states of physical properties for which each sensor measures. For each sensor, the measurement-acquisition system produces a series of increasing magnetic-field harmonics within a frequency range dedicated to that sensor. For each harmonic, an antenna electrically coupled to an oscillating current (the frequency of which is that of the harmonic) produces an oscillating magnetic field. Faraday induction via the harmonic magnetic fields produces an electromotive force and therefore a current in the sensor. Once electrically active, the sensor produces its own harmonic magnetic field as the inductor stores and releases magnetic energy. The antenna of the measurement- acquisition system is switched from a transmitting to a receiving mode to acquire the magnetic-field response of the sensor. The rectified amplitude of the received response is compared to previous responses to prior transmitted harmonics, to ascertain if the measurement system has detected a response inflection. The "transmit-receive-compare" of sequential harmonics is repeated until the inflection is identified. The harmonic producing the amplitude inflection is the sensor resonant frequency. Resonant frequency and response amplitude are stored and then correlated to calibration data.
Woodward, Stanley E.↗
Resonant geomagnetic field oscillations and Birkeland currents in the morning sector
The relationship between large-scale Birkeland currents and resonant oscillations of the geomagnetic field is investigated on the basis of Viking magnetic-field, electric-field, and particle measurements and AMPTE-CEE and IMP-8 magnetic-field measurements obtained during April 23-25, 1986. The data are presented in extensive graphs and characterized in detail. The 3-16-mHz 5-60-nT magnetic-field oscillations detected by Viking are also seen by AMPTE-CEE below L = 8.8 and extend from the lower L shells to the boundary between regions 1 and 2 of the Birkeland-current system, and this boundary is shown to be closely related to the interface between the low-latitude boundary layer and the central plasma sheet. It is suggested that the magnetospheric oscillations may be driven by several different solar-wind features, possibly depending on the direction of the IMF.
Potemra, T. A.↗
Status of MSBS Study at NAL in 1995
Magnetic field intensity and currents passing through the coils of the National Aerospace Laboratory (NAL) 1O cm Magnetic Suspension and Balance System (MSBS) were measured while a cylindrical model was oscillated along x,y,z and also about y and z axes, respectively. The model was made of alnico 5 and was 8 mm in diameter and 60 mm long. Two kinds of tests were carried out. Amplitude of the oscillation was varied at a frequency of 10 Hz. Frequency was varied from 1 to 50 Hz in the other test. Results of the tests show that the relation between coil currents and magnetic force acting on the model is affected by frequency. They also show that the relation between measured magnetic field intensity and the force in vertical direction is independent of the frequency below 30 Hz. Using the measured magnetic field intensity, the vertical force can be evaluated at the MSBS instantaneously when a model moves at frequencies below 30 Hz. A static drag force calibration test was carried out at the 60 cm MSBS. Obtained relationships between measured drag coil currents and loads shows large hysteresis.
Sawada, Hideo↗
Measurements of the magnetic fields in interplanetary space and the magnetosphere
Measurements of magnetic fields in interplanetary space and magnetosphere by satellites and space probes
SPACE PROBE↗
Magnetic Field Response Measurement Acquisition System
This paper presents a measurement acquisition method that alleviates many shortcomings of traditional measurement systems. The shortcomings are a finite number of measurement channels, weight penalty associated with measurements, electrical arcing, wire degradations due to wear or chemical decay and the logistics needed to add new sensors. Wire degradation has resulted in aircraft fatalities and critical space launches being delayed. The key to this method is the use of sensors designed as passive inductor-capacitor circuits that produce magnetic field responses. The response attributes correspond to states of physical properties for which the sensors measure. Power is wirelessly provided to the sensing element by using Faraday induction. A radio frequency antenna produces a time-varying magnetic field used to power the sensor and receive the magnetic field response of the sensor. An interrogation system for discerning changes in the sensor response frequency, resistance and amplitude has been developed and is presented herein. Multiple sensors can be interrogated using this method. The method eliminates the need for a data acquisition channel dedicated to each sensor. The method does not require the sensors to be near the acquisition hardware. Methods of developing magnetic field response sensors and the influence of key parameters on measurement acquisition are discussed. Examples of magnetic field response sensors and the respective measurement characterizations are presented. Implementation of this method on an aerospace system is discussed.
Woodard, Stanley E.↗
Magnetic Field Response Measurement Acquisition System
A measurement acquisition method that alleviates many shortcomings of traditional measurement systems is presented in this paper. The shortcomings are a finite number of measurement channels, weight penalty associated with measurements, electrical arcing, wire degradations due to wear or chemical decay and the logistics needed to add new sensors. The key to this method is the use of sensors designed as passive inductor-capacitor circuits that produce magnetic field responses. The response attributes correspond to states of physical properties for which the sensors measure. A radio frequency antenna produces a time-varying magnetic field used to power the sensor and receive the magnetic field response of the sensor. An interrogation system for discerning changes in the sensor response is presented herein. Multiple sensors can be interrogated using this method. The method eliminates the need for a data acquisition channel dedicated to each sensor. Methods of developing magnetic field response sensors and the influence of key parameters on measurement acquisition are discussed.
Woodard, Stanley E.↗
Ion-Scale Secondary Flux Ropes Generated by Magnetopause Reconnection as Resolved by MMS
New Magnetospheric Multiscale (MMS) observations of small-scale (approx. 7 ion inertial length radius) flux transfer events (FTEs) at the dayside magnetopause are reported. The 1O km MMS tetrahedron size enables their structure and properties to be calculated using a variety of multispacecraft techniques, allowing them to be identified as flux ropes, whose flux content is small (approx. 22 kWb).The current density, calculated using plasma and magnetic field measurements independently, is found to be filamentary. lntercomparison of the plasma moments with electric and magnetic field measurements reveals structured non-frozen-in ion behavior. The data are further compared with a particle-in-cell simulation. It is concluded that these small-scale flux ropes, which are not seen to be growing, represent a distinct class of FTE which is generated on the magnetopause by secondary reconnection.
Eastwood, J. P.↗
Lunar electrical conductivity, permeability,and temperature from Apollo magnetometer experiments
Magnetometers were deployed at four Apollo sites on the moon to measure remanent and induced lunar magnetic fields. Measurements from this network of instruments were used to calculate the electrical conductivity, temperature, magnetic permeability, and iron abundance of the lunar interior. Global lunar fields due to eddy currents, induced in the lunar interior by magnetic transients, were analyzed to calculate and electrical conductivity profile for the moon, and those profiles were used to calculate the lunar temperature for an assumed lunar material of olivine. Simultaneous measurements by magnetometers on the lunar surface and in orbit around the moon were use to construct a whole-moon hysteresis curve, from which the global lunar magnetic permeability is determined. Total iron abundance (sum of iron in the ferromagnetic and paramagnetic states) was calculated for two assumed compositional models of the lunar interior. Other lunar models with an iron core and with a shallow iron-rich layer also discussed in light of the measured global lunar permeability. Simultaneous magnetic field and solar plasma pressure measurements show that the remanent fields at the Apollo 12 and 16 sites interact with, and are compressed by, the solar wind. Velocities and thicknesses of the earth's magnetopause and bow shock were also estimated from simultaneous magnetometer measurements.
Dyal, P.↗
Spatially extended measurements of magnetic field strength in solar plages
The study determines magnetic field strengths along one spatial dimension of a plage region from circularly polarized (Stokes V) spectra of a highly Zeeman-sensitive iron line at 6388.6/cm (1.565 micron). The measured fields are found to lie primarily in the range 1200-1700 G. The mean formal precision for a single determination is +/-65 G. More than 90 percent of the magnetic flux is kilogauss-strength fields. The field strength is coherently organized on spatial scales from 1 arcmin to the limit of angular resolution (2 arcsec). It is inferred from the amplitude of the V signal that the spatial filling factor of the strong-field elements can approach 0.5 within a 2-arcsec resolution element. Magnetic field strength and amplitude are correlated in the sense that locations with stronger mean fields have larger V amplitudes, but the relationship shows more scatter than can be explained by errors in measurement. The individual sigma-components of the V profile are broader than an average quiet-sun line profile would produce by an amount corresponding to 625 G or 4.1 km/s; Zeeman broadening due to a range of magnetic field strength within the resolution element is proposed as the likely explanation.
Rabin, Douglas↗
Interplanetary magnetic measurements
Mariner II interplanetary magnetic field measurements
INTERPLANETARY MAGNETIC FIELD↗
The magnetosphere of Saturn
Pioneer 11 and Voyager 1 and 2 magnetic field measurements over the entire flyby of Saturn's magnetic field have been analyzed by fitting a magnetospheric dipole field (i.e., a dipole field plus the field due to currents in the magnetopause), higher moments of the internal field aligned with the dipole along the rotation axis, and the field due to an equatorial sheet current to the magnetic measurements. A dipole moment of 21,431 nT R(s) exp 3, a quadrupole moment of 2403 nT R(s) exp 4, an octopole moment of 2173 nT R(s) exp 5, and an equatorial sheet current of half thickness 2.0 R(s) from about 5 R(s) to the solar edge of the magnetopause, fit the measurements over the entire magnetosphere with an rms deviation of 3.2 nT where R(s) is the planet radius, 66,330 km. The primary feature of the present analysis is the explicit inclusion of the calculated magnetopause current field, which reduces the overall rms deviation over the entire flyby from sigma values of 4.7 and 5.9 nT, using previous models, to 3.2 nT using the present.
Beard, David B.↗
An evaluation of recent internal field models
The paper reviews the current status of internal field models and evaluates several recently published models by comparing their predictions with annual means of the magnetic field measured at 140 magnetic observatories from 1973 to 1977. Three of the four models studied, viz. AWC/75, IGS/75, and Pogo 8/71, were nearly equal in their ability to predict the magnitude and direction of the current field. The fourth model, IGRF 1975, was significantly poorer in its ability to predict the current field. All models seemed to be able to extrapolate predictions quite well several years outside the data range used to construct the models.
Mead, G. D.↗
Limits on the possible intrinsic magnetic field of Venus
Magnetic field measurements obtained by the Pioneer Venus orbiter at low altitudes in the solar wind wake region are examined for possible surface-correlated features and any possible intrinsic magnetic moment. The field variations observed in the wake do not resemble those expected for a solar wind interaction with even a weak intrinsic magnetic field. Little orbit-to-orbit persistence of features is found in the magnetic records. The magnetic field measurements in the wake are averaged in 10 deg x 10 deg bins to minimize the effects of external field sources. In these 37 bins, the average fields appear to be randomly oriented and consistent with zero mean in the region mapped. Using these 37 averaged vector fields, a maximum intrinsic magnetic dipole moment is obtained of 4.3 + or - 2.0 x 10 to the 21st G cu cm, approximately an order of magnitude less than previous estimates. It is noted that a more conservative estimate of the probable error of the mean is 5.5 x 10 to the 21st G cu cm. The Pioneer Venus measurements are thus consistent with zero planetary moment. The present measurements are found to be far below estimates made on the basis of angular momentum, the so-called magnetic Bode's law, and far below the dynamo scaling law of Busse.
Russell, C. T.↗
Magnetic measurements in the Apollo program
Magnetic field measurements in Apollo lunar landing mission
ELECTROMAGNETIC MEASUREMENT↗