Search NASA⌕ Search

SEARCH · Search NASA

Results for “Main”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Analytical investigation of the landing dynamics of a large airplane with a load-control system in the main landing gear

The results of an evaluation of an active load-control landing gear computer program (ACOLAG) for predicting the landing dynamics of airplanes with passive and active main gears are presented. ACOLAG was used in an analytical investigation of the landing dynamics of a large airplane with both passive and active main gears. It was concluded that the program is valid for predicting the landing dynamics of airplanes with both passive and active main gears. It was shown that the active gear reduces airframe-gear forces and airplane motions following initial impact, and has the potential for significant reductions in structural fatigue damage relative to that which occurs with the passive gear.

Mcgehee, J. R.↗
NASA NTRS1981

Acoustic performance evaluation of an advanced UH-1 helicopter main rotor system

An experimental investigation of the high-speed impulsive noise characteristics of an advanced main rotor system for the UH-1 helicopter has been conducted. Models of both the advanced main rotor system and the UH-1 main rotor system were tested at one-quarter scale in the Langley 4- by 7-meter (V/STOL) Tunnel using the General Rotor Model System (GRMS). Tests were conducted over a range of simulated flight and descent velocities. The tunnel was operated in the open-throat configuration with acoustic treatment to improve the acoustic characteristics of the test chamber. In-plane acoustic measurements of the high-speed impulsive noise demonstrated a 7 to 8 dB reduction in noise generation is available by using the advanced rotor system on the UH-1 helicopter.

Hoad, D. R.↗
NASA NTRS1981

Discovery of three X-ray luminous pre-main-sequence stars

Three X-ray sources found serendipitously in Einstein images of the Taurus-Auriga cloud complex were observed at the McGraw-Hill Observatory and are found to be associated with stars of approximately 12 mag with weak H-alpha emission. The stars lie on the edges of dark clouds and are spectroscopically similar to the least active emission-line pre-main-sequence stars. Although they lie well above the ZAMS in the H-R diagram, they do not exhibit ultraviolet excess, strong optical variability, or evidence for mass outflow/inflow characteristics of the more active T Tauri stars. Their only unusual property is high X-ray luminosity (approximately 10 to the 30th ergs/s). It is suggested that the X-ray emission from pre-main-sequence stars is not closely linked to the conditions giving rise to their unusual spectroscopic properties. The emission may instead represent an enhanced form of the coronal activity producing X-rays observed in late-type main-sequence stars.

Feigelson, E. D.↗
NASA NTRS1983

A photoelectric lightcurve survey of small main belt asteroids

A survey to obtain photoelectric lightcurves of small main-belt asteroids was conducted from November 1981 to April 1982 using the 0.91- and 2.1-m telescopes at the University of Texas McDonald Observatory. A total of 18 main-belt asteroids having estimated dimaters under 30 km were observed with over half of these being smaller than 15 km. Rotational periods were determined or estimated from multiple nights of observation for nearly all of these yielding a sample of 17 small main-belt asteroids which is believed to be free of observational selection effects. All but two of these objects were investigated for very short periods in the range of 1 min to 2 hr using power spectrum analysis of a continuous set of integrations. No evidence for such short periods was seen in this sample. Rotationally averaged B(1,0) magnitudes were determined for most of the surveyed asteroids, allowing diameter estimates to be made. Imposing the suspected selection effects of photogaphic photometry on the results of this survey gives excellent agreement with the results from that technique. This shows that the inability of photographic photometry to obtain results for many asteroids is indeed due to the rotational parameter of those asteroids.

Binzel, R. P.↗
NASA NTRS1984

136-foot main parachute for recovery of Space Shuttle Solid Rocket Boosters

A 136-ft-D(0) main parachute system has been developed to replace the present 115-ft-D(0) main parachutes currently flown on the Space Shuttle Solid Rocket Boosters (SRB's) for the purpose of reducing the velocity at water impact. This cluster of three larger main parachutes will decelerate the 170,000-pound SRB to a terminal nominal impact velocity of 75 feet per second (ft/s) as compared to the present velocity of 88 ft/s. The paper discusses the design, development, and manufacturing of this 136-ft parachute.

Rodier, R. W.↗
NASA NTRS1984

The lower main sequence and the nature of secondary stars in ultracompact binaries

The possible nature of the secondary stars in ultracompact binary stellar systems (with orbital periods of less than about 1 hr) are systematically investigated. Using a simplified stellar evolution code, which assumes isentropic stellar models, nearly 3000 separate models for hydrogen-burning main-sequence stars with masses less than 0.3 solar mass are generated. The effects of the (homogeneous) chemical composition on the properties of such stars and in, particular, on the minimum main-sequence mass are explored in detail. It is found that this minimum mass is a sensitive function of the hydrogen content and can be as small as 0.035 solar mass. The properties of fully degenerate low-mass stars, as well as low-mass stars that are not in thermal equilibrium are also studied. In particular, it is shown that the thermal time scale of such nonequilibrium stars may exceed 10 billion yr. The results also confirm the existence of a second branch of the main sequence and shed new light on the thermal instability of this branch. The available observational information on the three known ultracompact binary systems (4U 1626-67, G61-29, 4U 1916-05) is summarized, and the results of the stellar model calculations are combined with the empirical results to place constraints on the properties of the secondary stars.

Rappaport, S.↗
NASA NTRS1985

Experimental study of main rotor tip geometry and tail rotor interactions in hover. Volume 2: Run log and tabulated data

A model scale hover test was conducted in the Sikorsky Aircraft Model Rotor hover Facility to identify and quantify the impact of the tail rotor on the demonstrated advantages of advanced geometry tip configurations. The existence of mutual interference between hovering main rotor and a tail rotor was acknowledged in the test. The test was conducted using the Basic Model Test Rig and two scaled main rotor systems, one representing a 1/5.727 scale UH-60A BLACK HAWK and the others a 1/4.71 scale S-76. Eight alternate rotor tip configurations were tested, 3 on the BLACK HAWK rotor and 6 on the S-76 rotor. Four of these tips were then selected for testing in close proximity to an operating tail rotor (operating in both tractor and pusher modes) to determine if the performance advantages that could be obtained from the use of advanced geometry tips in a main rotor only environment would still exist in the more complex flow field involving a tail rotor. This volume contains the test run log and tabulated data.

Balch, D. T.↗
NASA NTRS1984

Space Shuttle Main Engine overhaul program

The Space Shuttle Main Engine first flight set from the Orbiter Columbia was returned to Rockwell International/Rocketdyne Division in Canoga Park, California for overhaul after five successful development flights. The three main engines have been completely disassembled and the hardware assessed for space flight effects. Schedules to overhaul subsequent flight engines have been established based on operational requirements of the Space Transportation System. To support these requirements, a dedicated Space Shuttle Main Engine Overhaul Center is being built at the Canoga Park Rocketdyne Facility incorporating the latest in manufacturing, inspection, and data processing equipment.

Stohler, S.↗
NASA NTRS1985

Space Shuttle main engine product improvement

The current design of the Space Shuttle Main Engine has passed 11 certification cycles, amassed approximately a quarter million seconds of engine test time in 1200 tests and successfully launched the Space Shuttle 17 times of 51 engine launches through May 1985. Building on this extensive background, two development programs are underway at Rocketdyne to improve the flow of hot gas through the powerhead and evaluate the changes to increase the performance margins in the engine. These two programs, called Phase II+ and Technology Test Bed Precursor program are described. Phase II+ develops a two-tube hot-gas manifold that improves the component environment. The Precursor program will evaluate a larger throat main combustion chamber, conduct combustion stability testing of a baffleless main injector, fabricate an experimental weld-free heat exchanger tube, fabricate and test a high pressure oxidizer turbopump with an improved inlet, and develop and test methods for reducing temperature transients at start and shutdown.

Lucci, A. D.↗
NASA NTRS1985

Main propulsion system design recommendations for an advanced Orbit Transfer Vehicle

Various main propulsion system configurations of an advanced OTV are evaluated with respect to the probability of nonindependent failures, i.e., engine failures that disable the entire main propulsion system. Analysis of the life-cycle cost (LCC) indicates that LCC is sensitive to the main propulsion system reliability, vehicle dry weight, and propellant cost; it is relatively insensitive to the number of missions/overhaul, failures per mission, and EVA and IVA cost. In conclusion, two or three engines are recommended in view of their highest reliability, minimum life-cycle cost, and fail operational/fail safe capability.

Redd, L.↗
NASA NTRS1985

Aerodynamic evaluation of the redesigned Space Shuttle Main Engine hot-gas manifold

The current Space Shuttle Main Engine hot-gas manifold configuration contains three transfer ducts connecting the fuel bowl and the main injector torus. For the current study, a new hot-gas manifold was designed to improve on a previously tested two-duct concept. This was accomplished by eliminating separated flow regions, reducing local velocities, and providing as uniform a flowfield as possible. The two-duct hot-gas manifold tested in this study showed significant improvement over the existing three-duct design. The circumferential pressure gradient was reduced by 67 percent. The system total pressure loss from the discharge of the 180-degree turn to the transfer duct exit was 60 percent less than with the three duct hot gas manifold. Although only limited fluctuating pressure data were taken in the main injector, indications are that the environment there has been improved.

Vogt, S. T.↗
NASA NTRS1986

Scaling of helicopter main rotor noise in hover

A 2.1-m-diam, one-sixth-scale model helicopter main rotor was tested in hover at the NASA Ames Outdoor Aerodynamic Research Facility. It had previously been tested in hover in the NASA Ames 40- by 80-Foot Wind Tunnel test section. The primary objective of the tests was to obtain acoustic and performance data on a medium-scale rotor at various thrust coefficients and tip Mach numbers to compare to similar existing data on a full-scale helicopter main rotor. Information is presented on the effects of thrust- and tip-speed variation, the effects of boundary-layer trip strips, and the effects of wind conditions. In addition, a preliminary evaluation of the scaling of helicopter main-rotor noise in hover is presented. A secondary objective was to contribute to a data base that will permit the estimation of facility effects on acoustic testing.

Kitaplioglu, C.↗
NASA NTRS1989

Space Shuttle Main Engine structural analysis and data reduction/evaluation. Volume 6: Primary nozzle diffuser analysis

The primary nozzle diffuser routes fuel from the main fuel valve on the Space Shuttle Main Engine (SSME) to the nozzle coolant inlet mainfold, main combustion chamber coolant inlet mainfold, chamber coolant valve, and the augmented spark igniters. The diffuser also includes the fuel system purge check valve connection. A static stress analysis was performed on the diffuser because no detailed analysis was done on this part in the past. Structural concerns were in the area of the welds because approximately 10 percent are in areas inaccessible by X-ray testing devices. Flow dynamics and thermodynamics were not included in the analysis load case. Constant internal pressure at maximum SSME power was used instead. A three-dimensional, finite element method was generated using ANSYS version 4.3A on the Lockheed VAX 11/785 computer to perform the stress computations. IDEAS Supertab on a Sun 3/60 computer was used to create the finite element model. Rocketdyne drawing number RS009156 was used for the model interpretation. The flight diffuser is denoted as -101. A description of the model, boundary conditions/load case, material properties, structural analysis/results, and a summary are included for documentation.

Foley, Michael J.↗
NASA NTRS1989

Space Shuttle Main Engine structural analysis and data reduction/evaluation. Volume 2: High pressure oxidizer turbo-pump turbine end bearing analysis

The high-pressure oxidizer turbopump (HPOTP) consists of two centrifugal pumps, on a common shaft, that are directly driven by a hot-gas turbine. Pump shaft axial thrust is balanced in that the double-entry main inducer/impeller is inherently balanced and the thrusts of the preburner pump and turbine are nearly equal but opposite. Residual shaft thrust is controlled by a self-compensating, non-rubbing, balance piston. Shaft hang-up must be avoided if the balance piston is to perform properly. One potential cause of shaft hang-up is contact between the Phase 2 bearing support and axial spring cartridge of the HPOTP main pump housing. The status of the bearing support/axial spring cartridge interface is investigated under current loading conditions. An ANSYS version 4.3, three-dimensional, finite element model was generated on Lockheed's VAX 11/785 computer. A nonlinear thermal analysis was then executed on the Marshall Space Flight Center Engineering Analysis Data System (EADS). These thermal results were then applied along with the interference fit and bolt preloads to the model as load conditions for a static analysis to determine the gap status of the bearing support/axial spring cartridge interface. For possible further analysis of the local regions of HPOTP main pump housing assembly, detailed ANSYS submodels were generated using I-DEAS Geomod and Supertab (Appendix A).

Sisk, Gregory A.↗
NASA NTRS1988

Lithium in lower-main-sequence stars of the Alpha Persei cluster

Lithium abundances are presented for main-sequence stars of spectral types F, G, and K in the young open cluster Alpha Per. For 46 cluster members, a correlation between Li abundance and projected rotational velocity v sin i is found: all of the Li-poor stars are slow rotators. Two explanations are proposed to account for the correlation: (1) that the Li depletion is introduced following a rapid spin-down phase experienced by young low-mass stars, and that this episode of Li depletion may be the dominant one determining the spread of Li abundances among young low-mass main-sequence stars, and (2) that star formation has occurred over a finite period such that the older stars have undergone a spin-down and depletion of Li by a means that may or may not depend on rotation. The Li abundance in the warm and rapidly rotating stars appears to be undepleted, as is predicted by recent models of pre-main-sequence stars. The depletion observed in the cool stars exceeds the level predicted by these models.

Balachandran, Suchitra↗
NASA NTRS1988

Heavy hydrocarbon main injector technology

One of the key components of the Advanced Launch System (ALS) is a large liquid rocket, booster engine. To keep the overall vehicle size and cost down, this engine will probably use liquid oxygen (LOX) and a heavy hydrocarbon, such as RP-1, as propellants and operate at relatively high chamber pressures to increase overall performance. A technology program (Heavy Hydrocarbon Main Injector Technology) is being studied. The main objective of this effort is to develop a logic plan and supporting experimental data base to reduce the risk of developing a large scale (approximately 750,000 lb thrust), high performance main injector system. The overall approach and program plan, from initial analyses to large scale, two dimensional combustor design and test, and the current status of the program are discussed. Progress includes performance and stability analyses, cold flow tests of injector model, design and fabrication of subscale injectors and calorimeter combustors for performance, heat transfer, and dynamic stability tests, and preparation of hot fire test plans. Related, current, high pressure, LOX/RP-1 injector technology efforts are also briefly discussed.

Fisher, S. C.↗
NASA NTRS1990

Main-sequence mass loss and the lithium dip

The significant dip in observed lithium abundances for Population I stars near M about 1.3 solar mass is discussed. It is noted that this dip occurs near where the instability strip crosses the main sequence on the lower edge of the Delta Scuti stars and that stellar pulsations are expected to give rise to mass loss. A total mass loss of 0.05 solar mass over the main-sequence lifetime of these stars would be sufficient to explain the observations of lithium depletion. The absence of a dip in the Pleiades and of significant depletion of beryllium in the Hyades places tight constraints on the rate of mass loss. These constraints make unlikely the high main-sequence mass-loss rates which would significantly affect globular cluster ages.

Schramm, David N.↗
NASA NTRS1991

Jet Boost Pumps For The Space Shuttle Main Engine

Brief report proposes use of jet boost pumps in conjunction with main pumps supplying liquid hydrogen and liquid oxygen to main engine of Space Shuttle. Main part of pump has no moving parts. Benefits include increased reliability, simplified ducts, and decreased weight.

Meng, Sen Y.↗